Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹21.2 L+₹21,928 (1.04%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹21.9 L+₹88,216 (4.20%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹26.8 L+₹5.8 L (27.5%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹29.6 L
EMD Value
₹59,100
Closing Date
27 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) B/R Chakeri Kanpur
GE(AF) B/R Chakeri Kanpur- 208008
ADDN/ ALTN OF KITCHEN AND CUP BOARDS AND ALLIED B/R WORK IN MD ACCN AT 7 AFH KANPUR CANTT
2024_MES_644817_1
GE (AF) BR/CHK/T-62 OF 2023-24 8923/E8
Open Tender
Civil Works
Item Rate
180 days
7 AFH KANPUR CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(AF) B/R Chakeri Kanpur
₹59,100
Yes
7 Jun 2024
1 Mar 2024
3 Apr 2024
1 Mar 2024
27 Mar 2024
15 Mar 2024
Amount
S&F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down existing pipes and connection complete all as specified and directed.
All as per item No 1 above but bore of pipe 20 mm
Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting not exc 10 cm girth complete all as specified and directed.
Dismantling of cast iron soil pipes jointed in cement mortar up to and including 100 mm dia complete all as specified and directed.
S&F of cast iron soil waste and vent pipes, sand cast pipe 75 mm dia, in any length with or without ears with lead joints fixed on walls complete all as specified and directed.
All as per item No 5 above but 100 mm dia pipe.
S&F in repairs CI bend(any radius) 75 mm dia , diminishing pieces or tapers with oval access door complete all as specified and directed.
All as per item No 7.00 above but 100 mm dia
S&F in repair cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.
S&F in repair Cast iron Nahni trap 75mm dia outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 Type 1:2:4 diameter of out let pipe 100mm complete all as specified and directed.
S&F rotational moulded polythene water storage tank of capacity 750 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position, including dismantling of old tank & removing complete all as specified and as directed.
M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in kerbs , copings , bed plates, bases of tank padding / tank staging concrete etc. complete all as specified and as directed.
S&F in repair bib taps ,cast copper alloy ,fancy type long shank ,chromium plated with capstan ,head screwed down ,high pressure ,screwed for iron pipe 15 mm bore and fixed complete all as specified and directed.
S&F in repair fancy type chromium plated central hole basin mixer w/o pop up for 15mm bore pipes complete all as specified and directed.
S&F in repair 15 mm stop valves (concealed type) cast copper alloy, CP screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs 15 mm stop angle vavle cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs brass chromium plated grating of size 127 mm dia complete all as specified and directed.
S&F in repair chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed .
S&F in repair chromium plated soap dish complete all as specified and directed.
S&F in repair wall mixture 15 mm dia with provision for over head shower with 115 mm long bend pipe on upper side connecting legs & wall flange, fixed with 15 mm GI pipe complete all as specified and directed. Make : Cat No FLR-CHR-5273UPR of Jaquar or equivalent make as mention in Appx of PS.
S&F in repair Gun metal globe or gate valves 20 mm dia with iron wheel head screwed both ends, for iron pipe and fixed complete all as specified and directed.
S&F in repair ball brass valves 20 mm dia high pressure with polythene float and flynut screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repairs vitreous china white squatting pan orrissa pattern size 630x450mm with integral foot rest including provision of lime concrete bedding complete all as specified and directed.
S&F in repair PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to WC including PVC flush pipes ,brackets complete all as specified and directed.
S&F in repair Wash hand basin white vitreous china 550 x 400mm including necessary CP Waste fitting, waste pipe complete all as specified and directed.
S&F in repair corner glass shelf 300mm (with brass brackets) of Cat No BEA-44 of make- Prayag or equivalent in Cera/Essco complete all as specified and directed.
S&F in repair PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends fixed complete all as specified and directed.
S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including waste coupling & waste pipe complete all as specified and as directed.
S&F in repair stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed.
Demolition of cement concrete /lime concrete of any description and in any position not otherwise specifically provided for , such as sunken floor filling etc, complete all as specified and directed.
M&L 25 mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to stores and rubbish off the premises.
M&L for joint free nonskid joint free 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n, exc 0.18 sqm in floor etc ceramic tiles of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces, over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M & L for vitrified light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles n exc 0.36 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M&L for joint free glazed ceramic joint free tiles in vertical surfaces 350 x250 x7mm/450x350x7mm thick of approved colour any print/design set and jointed in neat cement slurry and pointed in white/coloured cement to match the surfaces over and including backing 10mm thick in CM 1:4 complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floor aprons, slabs and shelves etc laid in bedded in cement mortar
M&L of granite of (type and colour as approved) of 16-18mm thick rubbed and polished, edges rounded fully moulded in cooking plat forms, shelves and like in CM 1:4 including pointing in white cement 1:2 using marble dust and with admixture of pigment to match the shade of granite 20mm thick over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed
S&F in repairs PVC (SWR) pipes 110 mm single socketed in any length , with rubber ring joints fixed to walls including necessary iron clamps fixed on wall,roof complete all as directed.
S&F of PVC (SWR) bends /shoes 110 mm complete all as directed.
Demolition of brick/stone masonry built in cement mortar complete all as specified and directed.
M&L brick work with Sub Class `B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.
Taking down cement plaster or brick or stone walls/ concrete surfaces including taking out joints, hacking for key, scrubbing down on with water etc.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 10 mm thick on fair faces of brick concrete surfaces in ceiling in CM (1:3) finish even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on fair faces of brick walls /concrete surface finished even and smooth without using extra cement complete all as specified and directed
M&L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1 mm thick wall care putty, complete all as specified and directed.
M&L for preparation of new undecorated surfaces of walls and applying two coat of exterior emulsion paint with anti algae weather proof, 100% acrylic emulsion with silicon additives that offers and anti algae and high performance exterior wall finish over a coat of primer, all as specified and directed.
M&L for preparation of new surface of ceiling and applying three coats of white wash, all as specified and directed.
Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frames ( without taking off shutters from the frame exc 1.5sqm but n. exc 4 sqm each complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be painted to match with printed sheet supplying & fixing in opening as per specification & drawing.
M&L for Factory made solid PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 5mm thick Moulded prelam PVC sheet on the front face & 5mm plain colour PVC prelam sheet on back face and fixed in the frame at site as per specification & drawing . (Note : The unit rate quoted by contractor includes 3 nos 75mm SS butt hinge, 2Nos 125mm handle, 100mm tower bolt, 1Nos 250mm aluminium sliding bolt, all other connected accessories in each door)
M&L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.
S & F 40 mm thick factory made second class hard wood plain, framed, panelled shutters (any number of panels), with 12mm thick panels of veneered particle board or plywood or bison board.
S&F MS butt hinges , medium weight cold rolled of size 100 mm thick complete all as specified and directed.
S&F aluminium anodised sliding bolt 300 mm long with hasp, staple (bolt type) and fixing of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 200 mm long extruded section and fixed complete all as specified and directed.
S&F aluminium alloy anodised handle of size 150 mm fabricated type complete all as specified and directed.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.
S&F in repair 250mm size mild steel door springs complete all as specified and directed.
S & F 18 mm thick 100% Lead free both side plain laminated WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges,lock etc for shutter should be included in quoated rated by the contractor.
S&F 19 mm thick MDF board, interior grade with both side decorative choice lamination fixed with screw to timber frame work as in shelves , Cup board shutter etc with all around lipping complete all as specified and directed.
S&F 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.
M&L for Framed work as grills with end bars shoulders/framed guard bars/gas bank/gate/framing barred iron doors,ladders,framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-410 or 310 complete all as specified and directed.
M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description exec 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Dismantling mild steel/ wooden windows/ventilators with grill of any description complete all as directed.
M&L for pressed steel window CRCA frame using profile 80x40x1.25mm thick & openable outside glass pane shutter & openable inside wirmesh shutter included guard bar of 10mm MS square frame complete with fixture & fitting such as box type hinges, peg stays glazing clips and handle, locking arrangement complete all as specified and directed by Engr-in-charge. Note:- 3 mm thick glass pane, SS wiremesh & guard bar/Grill included in above rates & PCC for pressed steel frame will be paid separately.
M & L for Plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping kerbs benching all as specified and directed.
S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces,perlin,rafter etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as specified and directed.
S&F 2.00 mm thick plain mild steel sheeting as in steel gates, complete all as specified and directed.
M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of oil emulsion distemper over a coat of primer over and including 1 mm thick wall care putty complete all as specified and directed.
M & L for preparation of old treated surfaces of walls /ceiling etc and applying two coats of white wash complete all as specified and directed.
M & L for preparation of old wooden surfaces of any description and applying two coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old steel surfaces of windows and ventilators by oiling/greasing in hinges and applying two coat of synthetic enamel paint complete all as specified and directed.
M & L for complete removal of existing treatment of wall and preparation of old decorated surfaces and applying two coats of exterior emulsion paint with anti algae weather proof, 100% Acrylic emulsion with silicon additives that offers and anti algae and high performance exterior wall finish over a coat of primer complete all as specified and directed
Taking down carefully aluminium point wiring (light, fans, socket etc) complete incl battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/floor etc complete all as specified.
Material and labour for point wiring (concealed) for one light/Bell/Ceiling/Exhaust Fan point controlled by one switch in and including rigid non-metallic PVC medium grade conduit 20mm dia size including cutting, chases for conduits, sunken boxes for concealed conduit with 1.5 sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for phase and neutral with flush type metal boxes modular type suitable for fixing modular switches, sockets fan regulator etc. with white colour cover plate with brass screw and including PVC insulated unsheathed mulit stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specified complete all as specified and directed. (Note - Rates shall be deemed to be including mounting concealed boxes and modular cover plated of suitable module.)
All as per Serial item No 82 above but for one 3 pin 5 Amp switch socket outlet point on same board complete all as specified and directed.
All as per Serial item No 82 above but for one 3 pin 5 Amp switch socket outlet point on independent board complete all as specified and directed.
All as per ser item No 82 above but for one 3 pin 15 Amp switch socket outlet point on independent board using 2.5 sqmm PVC insulated unsheathed FRLS multi stranded copper conductor cable for phase, neutral and earth wire complete all as specified and directed. Note for iten No 1 to 5 (i) Rates shall be deemed to be including concealed boxes and modular cover plated of suiteble module. (ii) Necessary PVC rigid junction boxes for identifying junctions as required on site and as directed by Engineer-in-Charge for point wiring work with PVC dummy plates shall be deemed to be included in the quoted rate. (iii) Same size wire shall be used for phase neutral & earth conductors. (iv) The wiring shall be done strictly by following proper colour code, using red, yellow & blue for phase and black for neutral and green for earth.
S & F modular switch 1 way 6 Amp, 1 module, 240 Volt complete all as specified and directed.
S & F bell push modular switch 1 way 6 Amp, 1 module, 240 Volt complete all as specified and directed.
S & F modular switch 1 way 16 Amp, 1 module, 240 Volt complete all as specified and directed.
S & F modular socket outlet for 3 pin 6 Amp and 2 pin 5 Amp multi purpose, 2 module , 240 Volt complete all as specified and directed.
S & F modular socket outlet for 2 in 1,3 pin 6 &16 multi purpose ,2 module, 240 Volt complete all as specified and directed.
S & F modular fan regulator step type, 120w, 2 module , 240 Volt complete all as specified and directed.
S & F ceiling rose surface backelite three terminals, PVC/Polycarbonate, insulated body complete all as specified and directed.
S & F bell electric,240 volt, single pole complete all as specified and directed.
S & F Lamp holder, with 9 W LED bulb, 240 volt, PVC/Polycarbonate, with back plate suitable for batten fitting complete all as specified and directed.
S & F in replacement Metal clad single pole and a nuetral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp,240V complete (for geyser) complete all as specified and directed.
S & F in replacement Metal clad single pole and a nuetral enclosure with a two pin and earth plug and socket with one single pole MCB SP 32 Amp,240V complete. (for AC) complete all as specified and directed.
S&F in repair fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as directed.
S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S&F in repair LED ligth fitting 9W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repair of security LED luminaire 36 w system with all accessories including GI mounting bracket of suitable size incl connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F Exhaust fan AC single phase 230/240volt of size 300 mm in sweep, metallic body complete with all accessories incl connecting up with three core flexible copper conductor cable of suitable size and making holes, groting nut bolts in wall for exhaust fan complete all as specified and directed including taking down old one & deposited in MES store yard complete all as specified and directed.
M&L for sub main wiring with two runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC conduit concealled with all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 6 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVCconduit concealed and connected to the terminal and common earth dolly all as specified and directed. (Note. Two run of cable and one run of PVC conduit concealled and one run of earth continuity wire shall be measured as one run complete all as specified.)
M&L for sub main wiring with two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC conduit concealled with all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 4 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVCconduit concealed and connected to the terminal and common earth dolly all as specified and directed. (Note. Two run of cable and one run of PVC conduit concealled and one run of earth continuity wire shall be measured as one run complete all as specified.)
S & F in repair of VTPN distribution board, doule door 4 ways with including incomming 125 Amp MCCB , 16 KA,4 pole as incomer and suitable for fixing of MCBs as outgoing with IP-43 protection, with suitable lugs for incomer, cable glands and bottom lugs for outgoing distribution system all as specified and directed.
S & F in repair SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed.
S&F in repair Isolator SPN , up to 63 Amp , 240 Volt complete all as specified and directed.
S&F in repair MCB SP upto 40 Amp ,240 Volt complete all as specified and directed.
M & L for Earthing complete with galvanized steel earth plate electrode 60 x60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts nuts, check nut and washers of GI and GI tubing 15 mm bore, medium grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C 1 pre cast RCC (1:2:4) type B1 cover slab 450 x 450 x 50 mm reinforced with 8 mm dia TMT bars 100 C to C including one handle for lifting made out of 8 mm dia MS bar, wire mash, 20 mm bore GI tubing medium grade for watering ,charcoal and salt in alternate layers including excavation earth work complete all as specified and directed Electrical plate no 3 of SSR Part-I.
M/S MAA TARA TREATMENT PROJECT
M/s DKS Engineering Works
M/S SDS Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .