Interior And Fit-out Work For Bureau Of Immigration (FRRO) at NBCC Imperia, Gajapati Nagar, Mancheswar Railway Colony, Bhubaneshwar, Odisha-751017

BILL OF QUANTITIES (BOQ)

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 2,047,761.84 5,305,603.09

2 PLUMBING & FIREFIGHTING WORKS 390,106.15 167,703.00

3 FURNITURE - 2,765,394.71

4 ELECTRICAL WORKS 2,845,650.00 1,753,570.00

TOTAL i/c GST 18,006,070.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

Summary of Civil and Interior Works

S.No. Description of Works Amount (SR, in Rs.)

1 Dismantalling 67,977.50 0.00

2 Masonry & Plaster 519,599.20 52,902.00

3 Flooring, Paving & Wet Works 577,422.00 533,837.00

4 Partitions & Wall Cladding 334,025.50 2,772,171.69

7 Finishes & Miscellaneous 72,154.00 511,290.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

CIVIL & INTERIOR WORKS

1 DISMANTALING

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of

unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.

15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 80.00 113.35 9,068.00

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means,

15.60 including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- CUM 50.00 263.95 13,197.50

charge, beyond 50 m initial lead, for all leads including all lifts involved.

SUB TOTAL OF DISMANTALLING 67,977.50 0.00

1 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat

of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 365.00 614.20 224,183.00

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1

AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor

1.2 6.47 V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all CUM 21.00 8,333.65 175,006.65

complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for

1.3 13.2 CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of mix.

1.4 13.4 12 mm cement plaster of mix

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies,

shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the

cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

1.6 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

1.7 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM 3.00 736.40 2,209.20

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all

complete above plinth level.

5.22A.4 Hot rolled deformed bars kg 30.00 107.85 3,235.50

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP Punning over cement plaster

in line & plumb finished smooth to receive paint. (Internal surfaces of walls).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry

mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm

mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)

Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This

layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of

surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or Raised Areas as a Back fill or

1.13 MR platform. Laying should be done in layers with pounding done at every level to ensure a proper cavity free installation CUM 6.00 5,721.00 34,326.00

without disturbing any existing services in the area. Cost to also include haunching for plumbing pipes.

SUB TOTAL OF MASONRY AND PLASTER 519,599.20 52,902.00

3 FLOORING, PAVING AND WET WORKS

TILE DADO :- Providing and fixing vitrifed wall tiles conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours of any size 1200mm x 600mm or as approved by Engineer-in-Charge,

3.1 MR in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and SQM 45.00 1,562.00 70,290.00

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required

thickness, leveling system and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more

(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all

3.3 11.40 colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 SQM 20.00 1,439.40 28,788.00

Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and

matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of upto 5 mm width, using epoxy grout mix of 0.70 kg of organic

3.4 coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge.

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite stone top (with straight

edge polished nosing) complete with base cabinet made of 20mm BWP board, outside surface (shutters) finished in

1mm thick Laminate of approved shade. All internal surfaces to have balancing laminate. The rate inclusive of

necessary hardware, handle lock sets, self closing hinges, spring loaded shutter, latch inside, all cabinet hardware

complete as per Architects approval. (BR of stone to be taken as Rs 1600/Sqmt). Width of work top counter 600mm/

detailed drawings.

Providing and Fixing of 15mm thick Engineered Woooden Flooring with plank width of 135/185mm and length of

1800/2100mm and top layer up to 3mm in approved finish. Surface of Top layer shall be pre finished with several layer

of UV hardened Acrylic lacquer. The product shall be Free from Formaldehyde and solvents. Flooring plank shall be

interlocked using Plank locking system in a glue less floating manner. Engineered wood planks shall be a composition

of 3 layer of Pine wood with direction of each layer oriented at right angle to the adjacent layer of natural strain in

Lacquer and Beveled in length and width as specified by the manufacturer-in-charge. Product shall be MAKE IN

INDIA. The cost to include providing and fixing of all acessories i.e Skirting, beading, profile etc. and Underlay 2mm PE

foam and polythene combo with 40 Micron complete as required.

TOTAL FOR PAVING & WET WORKS 577,422.00 533,837.00

4 PARTITIONS AND WALL CLADDING

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

GYPSUM PARTITIONING:- Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc

coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges

of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within

flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm

long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.

The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99

mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and

two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster

board conforming to IS: 2095:

Gypsum Panelling:-Providing and fixing, in position concealed G.I. section for wall paneling using board of required

thickness fixed on the ‘W’ profile (0.55 mm thick ) having a knurled web of 51.55 mm and two flanges of 26 mm each

with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange

of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling

with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile

with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of

engineer-incharge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide

jointing tape to provide seamless finish.

9.133.3 Gypsum board conforming to IS: 2095 Part - I

GLASS PARTITIONING:- Providing & Fixing Full Height Glass partition using 12mm Thk. Glass with anodised Aluminium

frame fixing glass with snap on option consisting of top, bottom and side frame measuring 40-46mm x 18mm-26mm

complete with glazing rubber as per manufacturer's specifications and instructions of Engineer- in-charge. Rate

include supply & Installation of 12 mm thk toughened glass with double sided adhesive tapes for glass to glass butt

joints. Partition system from FFL to False Ceiling level, inclusive of cost of support required for fixing in the ceiling. The

frame to be powder coated in desired shade as per the instructions of the Architect.

PARTITIONING - Partition using 12mm thick fire rated plywood fixed on both sides on aluminium Studs Frame 50mm x

50mm x 1.5mm as per approved sample and architectural drawings placing the same 600mm c/c. Aluminuim frame

to be fixed to floor and RCC Ceiling using fastners. The cost to include finishing visible edges with 12mm thick mdf strip

as per detail drawings.

PANELLING- Panelling using 12mm thick fire rated plywood fixed on one side on Aluminium Frame 50mm x 25mm x

4.5 MR 1.5mm as per approved sample and architectural drawings. Aluminium frame to be fixed to walls, floor and RCC SQM 266.44 2,653.00 706,858.69

Ceiling using fastners.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

VENEER CLADDING- Providing and Fixing 4.0 mm thick decorative/ Natural Veneer of approved design and shade,

cladded on to existing partitioning. (base rate Rs. 1450/- sqm)

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with

following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2.

Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to

dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer

layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine

fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light

wet rubbing is done this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in

required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,

which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-

Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

LAMINATE CLADDING- P/F 1mm thick laminate, on an existing Plywood surface including the cost on adhesives, nails

and all required accessories complete as per design and instrucitons on engineer-in-chrage.

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having

4.10 12.62 density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers SQM 175.00 322.50 56,437.50

and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge.

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood

particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior

grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane

primer (fittings to be paid separately).

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle

board or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorative

4.13 9.129 lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick SQM 10.00 2,307.35 23,073.50

with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm Commecial Ply Board finished using 1mm thick

laminate. The storage shall be complete with all hinges, drawer glides and hardware from approved make. All

4.14 internal surfaces to be completed using balancing laminate. Including brass D-type handles for shutters and recessed SQM 5.00 12,321.00 61,605.00

type handles for drawers. Storage to be of all heights as per design. Storage shutters to be made in solid laminate/

glass as per design and drawings.

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 19mm Commercial

Plybaord finished in 1mm Laminate. Shutters to be fixed to a frame. Rigidly fixed on both sides and top finshed in

4.16 MR laminate. No internal carcass required. All Hinges of hettich or equivalent. Internal Surface of the shutter in balancing SQM 2.00 6,819.00 13,638.00

white laminate. All shutters to be provided with Stainless steel louvers at the top and bottom of the shutter as per the

site requirements and instrcution of the Engineer In charge.

SUB TOTAL OF PARTITIONS AND WALL CLADDING 334,025.50 2,772,171.69

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

5.1 12.45 bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at

the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at

every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

Including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 290.00 1,355.80 393,182.00

1200 x 300mm ACOUTIC GRID CEILING - SITC of Acoustical microlook tegular edge with 15 mm thickness ,easily

demountable tile , manufactured from High density glass wool, visible surface is a batch painted glass tissue in white,

back of the tile covered with glass tissue. Size- 1200x300x15mm

Acoustics-Sound absorption(Alpha W) - 0.95 at 200 mm o.d.s as per EN ISO 354

Acoustics-Sound absorption Class - Class A at 200 mm o.d.s as per EN ISO 11654

Acoustics-Articulation class - 180 as per ASTM E1111, ASTM E1110

NRC - 0.9 NRC as per ASTM C 423

Humidity Resistance -Permanent ambient RH up to 95% at 30*C without sagging, warping and delaminating (

5.4 MR Fire Safety - Tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class SQM 95.00 2,877.00 273,315.00

A2 s1 d0 according to EN 13501-1 - European Standard.

Light Reflectance - 83% light reflectance.

Indoor Health & Well-being - Complying with the French regulation on VOC emissions, A+ level. Certified by the Finnish

Building Information Group (RTS) with the M1 label. Free from substances of very high Concern (SVHC) above 100

ppm as defined by the European REACH regulation (No1907/2006).Product Certified under GRIHA council of India for

Green Ratings. Environmental Product declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards.

Circularity - Re-cycled content of more than 70%

CE marking - CE-marked according to the harmonised standard EN 13964:2014. The cost to include all necessary

hardwares required for suspending and fixing the ceiling.

600MM X 600MM MINERAL FIBRE GRID - Providing & Fixing of Mineral Fibre Ceiling Tiles With 15mm GRID. The tiles

should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057

w/m K, Colour White, in module size of 600 x 600 x 16mm. The tile shall be installed with 15*38(web hight) wide T -

section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross

Tees with a web height of 38mm and need to be installed with Suspension system of manufacturer. The Tile & Grid

system used together should carry a 10 year warranty.

INSTALLATION: The grid should be with 15mm wide T - section flanges color white. The main T runner with length and

size of 15X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of size 15X38mm

made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre to form a grid of

1200X600mm and second cross T of length 600mm and size 15X38mm made of 0.30mm sheet to be interlocked at

middle of the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X19

Installation should be carried out as per recommended procedure. The grid frame should be suspended from ceiling

using M-6 fastener, L Cleat, 4mm GI wire with Stainless steel level adjustible clip which will be attached to Main Runner

at spaced of 1200 c/c

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

TRAP DOOR :- Providing & fixing Access Panel of size mentioned below having - 1. Outer aluminium frame - thickness :

1.5mm ( plus 0.2mm thick powder coating) Material : ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus

0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material: Hot dipped galvanized

steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot dipped

galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard ( Knauf Brand) Type:

moisture resistant ( MR) in green plasterboard liner. 6. Screw ( self - drilling black phosphate ) - Material: mild steel

C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock

) - Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steel Q235. 9. Hinge - Thickness : 4.0mm, Length:

82mm; Material: SS2172 ( cold drawn steel wire ). 10. Powder coating - Color: white, RAL 9010/ or as approved

complete as per instructions of engineer-in-charge.

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings hung

5.6 MR from ceiling @1000mm centre to centre with 2 nos of 6mm thk. Commercial ply on vertical & 12mm thk. Commercial RMT 30.00 1,022.00 30,660.00

ply on horizontal surface (straight & curved). Inclusive of finishing in Paint.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to macth the specifications

same as gypsum ceiling.

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum ceiling. In order

5.11 MR to make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as per drawings. (visible RMT 90.00 367.00 33,030.00

surface of gypsum band to not exceed 100mm) including plastic emulsion paint.

Providing of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape panels in

wooden or approved finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length

up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be

100-125 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-

5.12 MR coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended SQM 12.00 7,659.00 91,908.00

from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at

max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory

cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover

the edges of the panels.

SUB TOTAL OF CEILING 393,182.00 487,514.00

6 DOORS/ WINDOWS

STILE DOOR - Providing & Fixing of Stile Door System having size of 75*45 with Door Frame formed out of 45* 40mm /

50*50mm of 6063-T6 Virgin grade duly Anodized Aluminium, including 10 mm Toughened Glass. The cost to include

6.1 MR hardware like Door Closure, 4nos Hinges, Lever Handle with mortice lock, Door Seal & Gaskets etc. in approved shade Nos 10.00 66,851.00 668,510.00

and design as per architectural drawings and instructions of the architect. The size of door shall be upto 1050mm X

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

6.2 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

9.1.1 Second class teak wood CUM 0.55 142,949.70 78,622.34

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and

6.3 9.53 wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded EACH 6.00 228.85 1,373.10

stone aggregate 20mm nominal size).

LAMINATED FLUSH DOOR- Flush Doors finished using 1mm Thick Laminate on both sides panel of size upto 2400mm x

6.4 1000mm complete with Hardware including hinges, Door Closer, Mortice Lock with Handle, latches etc. including cost Nos 9.60 22,814.00 219,014.40

of Door frame with melamine/ duco finish. The cost to include providing and fixing of vision panel as per design.

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 1050x2400. with vision panel using wired

glass complete with Fire proof door frame. One side to be finished in fire retardant paint and one side to be finished in

Laminate of approved shade. All Frame to be finished in fire retardant paint. All hinges and hardware to be

thermatically sealed and 120 mins fire rated.

SUB TOTAL OF DOORS 83,401.64 947,888.40

7 FINISHES & MISCELLANEOUS

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers

specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 5.00 172.60 863.00

7.3 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

13.61.1 Two or more coats on new work SQM 10.00 155.90 1,559.00

ZEBRA BLINDS -Providing & fixing of Twist Window Shadings Blinds as per the sample shown having room darkening

fabric strip and sheer fabric strips alternately in such arrangement as when light filering strips overlap each other, it

creates visibilty and once the light filtering strips overlaps the sheer ones, it creates the no visibility effect.It has bottom

rail made of aluminium alloy extruded profile, powder coated and provided in fabric coordinated colour. The rolling

tube should be made up of aluminium alloy from extruded profile of Ø34mm. The fabric of this Blind should be made

up of 100% anti-static polyester vanes having light filtering and sheer vanes to reduce glare. Sheer layers made of

white 100% knit polyester & the selection of colors, textures and opacities as per Engineer-in-charge. The FABRIC shall

be constructed from spun-bonded 100% polyester fiber, having Green guard Certification treated with soil & dust

repellant require minimum regular interval cleaning. The fabric has a maximum width of 2.80 M and a thickness of

0.38mm (+ 5%) and having weight of 272g/m2 (+ 5%).The strip size is Solid 8.5 cm / Sheer 6 cm. The shading to be

operated by Easy rise mechanism with a continuous cord loop operating option. All plastic parts are in white color.

Installation to be done by quick release brackets (wall or ceiling).

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No. DSR Ref. No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

ROLLER BLINDS - Providing & supplying of Window Blinds as per the approved sample in required shade and style

consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-

480G weight per sqm, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small

testing ISO-5659-2. The tear resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE

UNIT shall be of clutch for quick, easy and safe installation, molded plastic with steel spring support and inserted into

the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left-hand

side of the Shade. The Shade when lowering or raising, shall be automatically locked in position upon release of the

ball chain by means of a built-in friction lock. Universal clutch for left- and right-hand operation. Chain Gear Ratio of

7.7 MR 1.75:1. The END PLUG shall be molded of plastic with a steel location pin. The plug shall be inserted into the tube end. SQM 5.00 3,242.00 16,210.00

(Opposite to the Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of coated steel & provided with

covers and used in right hand or left-hand positions differentiated by the acceptance of the of the rectangular drive

unit support or the round idler plug pin. Can be installed (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess.

The Bracket should be protruding outside maximum of 80mm.The ROLLER TUBE shall be of extruded aluminium with

37mm internal diameter & skin thickness of 1mm and shall incorporate a keyway integral with the tube to

accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN

shall be 2mm diameter cord with 4.5mm diameter acetal balls molded co-axially to it on 6mm pitch to form an

endless ball chain. It is used for raising or lowering action of the shades.

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design

7.9 M.R. calcualtions etc. and for prepration of as built drawing any other details as and when desired by Engineer Incharge/ Nos. 1.00 180,060.00 180,060.00

client. A qualified professsional for the purpose shall be appointed after due appproval from

Engineer-In-Charge.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface with 15 yrs MCS warranty as

approval of the Architect. (Only film surface area shall be measured and paid).

Providing and fixing of 4,6 mm thick annealed GRIHA rated lacquered glass manufactured industrially by curtain

coating process with PU lacquer (50 micron thick), opaque (if viewed against a support wall) conforming to EN 16477

standards for back painted glass , of approved color by Architect/ Client fixed with compatible Silicone having Shear

Bond Strength (Dry, 24 hours), greater than 450 kpa and tack free time of 10 to 30 mins compatible for installation of

mirror and lacquered glass / Foam based double sided adhesive tape for instantaneous adhesion, compatible with

mirror and lacquered glass having Shear bond strength (Dry, 15 mins) of 250 to 350 kpa) on a perfectly leveled 12mm

thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other structure.

The contractor should submit test reports for backpainted glass from manufacturer - High humidity Resistance

(conforms to BS EN 1036 1999); Color fastness ISO 105B02 standard & Mechanical Resistance ISO 7784 ( Taber Abrasion

test ) ISO 2409 ( Cross Hatch Test ) standard The manufactured backpainted glass should be environmentally friendly

(no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post

consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass

SUB TOTAL OF FINISHES 72,154.00 511,290.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

BOQ FOR FURNITURE

S.no Item Description Area Qty Total Ref Image

The overall size of table shall be 2400L x 900D x 750H. With side unit 2000L x 550D x 610H.The table top shall be 50mm thick at the edges of the

top.The table shall be made of prelaminate board in melamine finsih. Tabletop corner shall be round. The modesty panel of the main table

550mm height shall be made up of 13mm thick Pre-laminate particle board E1 norms duly finished with 2mm pvc edge banding on

automatic machine. The modesty panel shall be connected through L-shape Bracket connector. At the front side of table LED light strip shall

be provided. The LED light increase the overall look of the table. The table top shall be rest on, one side of fixed pedestal and other side

shall be on Extented return unit. Fixed pedestal shall have 2 equal drawer with finger grove handle ( handless desgin ). Side unit - Side table

shall be size 2000 L x 550 D x 610 H with 16mm thick E1 grade particle board with melamine finish with 2mm pvc edge bending on automatic

machine. Fixed side return with 2 drawers and 2 swing door, open shelf and open space for CPU, with holes for customer put their sockets.

FRRO TABLE WITH

1 Fixed side return shall have flexibility to be placed left or right during time of first assembly.All the Drawer and shutters shall be operated by 1.00 176,265.22 176,265.22

finger grove handle on the Drawer and shutter facia. For wire manegnment table shall be provided flipup size of 85W x 155L with provision

of 2 socket, 2 USB and 1 c-type port.The overall size of back unit shall be 2350L x 400D x 1980H. The back unit shall be made of prelaminate

board with melamine finish.The storage shall have one openable shutter with size of 600W x 390D x 1960H made of 15mm thick board with

pvc edge band finish.The storage shall have open cabinet. The open shelf shall be made of 25mm thick partical board and in middel

compartment sliding door shall be provided.The top open cabinet shall have have provision of LED strip light. storage shall have open

shelves to keep the awards, trophies or documents. Storages shall have multiples compartments with all other essential hardwares like hings,

handles etc.The OEM shall have ISO 9001, ISO 14001, Bifma Level 2, Green Guard by UL, India Design Mark & IGBC Gold rated factory

High Back Chair (Leatherite)

High back Chair having overall height 1200-1300mm, back height of 790 mm from seat level and width of 460 mm from top & 520 from mid

(lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat. Seat

height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the armrest shall

a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm & width of 60 mm. Seat

should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat, back &

2 headrest shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU faom. The 1.00 16,815.00 16,815.00

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA

certification .The synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height

adjustment on the right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility.

Aluminium die cast pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. tolerance of 25mm for seat & back size to be considered.

Medium Back Chair (Leatherite)

Medium back Chair having overall height 1050-1150mm, back height of 590 mm from seat level and width of 460 mm from top & 520 from

mid (lumbar) level. Seat Depth shall be 490 mm and adjustable upto 530mm. seat width shall be 520 mm measured at centre of the seat.

Seat height shall range between 430 mm to 520 mm. Armest shall be finished with foam & leatherite on the top & the structure of the armrest

shall a die cast aluminium with buffed finish & fixed with the seat below. The length of the top of the arm shall be 250 mm & width of 60 mm.

Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat and

3 back shall be upholstered with Leatherette 75% PVC & 25% polyester – 640 GSM, Abrasion-100000 cycles over PU faom. The manufacturer FRRO VISITOR CHAIR 3.00 15,127.61 45,382.83

(OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for

Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The

synchro mechanism shall be provided having 3 position multilocking & seat adjustable on the left hand side and height adjustment on the

right hand side of the user.The mechanism shall allow 360 degree revolving feature along with height adjustablility. Aluminium die cast

pedestal having length 5 twin 60 mm wheel castors heavy duty shall be provided. The Gas Lift used shall be class 4 tested as per ANSI BIFMA

standards. tolerance of 25mm for seat & back size to be considered.

Single Seater Sofa : Overall size shall be 1000 mm W x 1000 mm D x 880 mm H. Sofa inner frame structure shall be made from the

combination of treated solid wood and plywood having high quality webbing belts to ensure good strength, rigidity & stable construction to

offer high durability. There shall be extra padding between the armrest & the seat on both sides for better comfort & polyfilled in arms &

backrest. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level

4 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory SINGLE SEATER SOFA 1.00 31,497.58 31,497.58

certification, AIOTA certification .The polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively.

Seat to backrest angle should be ergonomically designed to offer the best seating comfort. Seat height shall be normally between 16 to 18

inches and depth shall be between 20-22 inches. The sofa shall have solid wooden leg. Upholstery shall be of high quality Leatherite offer

the best feel & comfort.

Digitally signed by AMIT

2 Seater Sofa : Overall size shall be 1610 mm W x 1000 mm D x 880 mm H. Sofa inner frame structure shall be made from the combination of

treated solid wood and plywood having high quality webbing belts to ensure good strength, rigidity & stable construction to offer high

durability. There shall be extra padding between the armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The

polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively. The manufacturer (OEM) shall have

5 ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table 2 SEATER SOFA 1.00 42,000.00 42,000.00

category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .Seat to backrest

angle should be ergonomically designed to offer the best seating comfort. Seat height shall be normally between 16 to 18 inches and depth

shall be between 20-22 inches. The sofa shall have solid wooden leg. Upholstery shall be of high quality Leatherite offer the best feel &

Center Table :-The overall size of the table shall be 1050 L x 525 D x 450 H mm. The top surface of the table shall be in boat shape design

having maximum size at the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick

Prelaminated particle board of E1 norms. The edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine.

The understructure of the table shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear

synthetic PU coating for the best resilence and high durability. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001

6 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, 1.00 14,062.98 14,062.98

Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The legs and the frame shall be joined together by method of

tenon and mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the bottom shall be 35x35

and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner

edges. The wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top

running at all four ends as well as one support in the middle.

Side Table :-The overall size of the table shall be 600 L x 600 D x 450 H mm. The top surface of the table shall be in boat shape design having

maximum size at the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated

particle board of E1 norms. The edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine. The

understructure of the table shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear

synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and

7 mortise for durability and better aesthetics. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB WOODEN SIDE TABLE 1.00 12,680.28 12,680.28

accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables,

IGBC Gold rated factory certification, AIOTA certification .Four legs shall be provided and the cross section of leg at the bottom shall be

35x35 and top shall be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be

corner edges. The wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table

top running at all four ends as well as one support in the middle.

Reception table : The overall size of the reception table shall be 2400 mm length, 750 mm depth & 1050 mm height. On the front side both

ends shall be provided with groove design strips to enhance the overall look. At the centre of the front side L shape surface shall be

provided fixed up with hinges to paste logo of the University. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001

issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs,

8 Storage & tables, IGBC Gold rated factory certification, AIOTA certification The entire table shall be made up of 25mm / 18mm thick pre RECEPTION TABLE 1 18,290.00 18,290.00

laminated particle board of E1 norms. Inside of table a working height shelf should be provided or height 750 mm to keep desktop/ laptop

and normal working with sitting. the edges of the visible surface shall be sealed with 2mm thick PVC lipping on automatic machine. Unless

specified tolerance of +/- 5mm to be considered for product dimensions Length, Depth & height and tolerance of 5% to be considered in

thickness & size of material & components used.

Mid Back Chair :-The overall size of Chair shall be height 1020 to 1120 +/-5 mm, width should be 595 +/-5mm and depth should be 640 +/-

5mm. Back Width 435 mm at Top and 490mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 465+/-5 mm and Seat height 450mm to 550

mm +/-5mm range. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming

to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering

within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be

supplied with Mesh at the back rest. The back frame shall be made up of injection molded nylon GF 3. Adjustable Lumbar Support of size 300

mm lenght, 150 mm height and 3mm thickness travel upto 65mm. The Chair should be provided with Snchyro mechanism with single lever

9 with one position lock. The mechanism shall allow360 degree revolving feature along with height adjustablility one Way with height RECEPTION CHAIR 1 11,894.40 11,894.40

adjustment button made of Delrin P 500 & arm top shall be PU material. The mechansim shall possess seat to back recline ratio of 3:7. The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA

certification The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6

material complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30%

glass filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e

Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

Digitally signed by AMIT

Single Seater Sofa : Overall size shall be 1000 mm W x 1000 mm D x 880 mm H. Sofa inner frame structure shall be made from the

combination of treated solid wood and plywood having high quality webbing belts to ensure good strength, rigidity & stable construction to

offer high durability. There shall be extra padding between the armrest & the seat on both sides for better comfort & polyfilled in arms &

backrest. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level

10 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory SINGLE SEATER SOFA 1.00 31,497.58 31,497.58

certification, AIOTA certification .The polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively.

Seat to backrest angle should be ergonomically designed to offer the best seating comfort. Seat height shall be normally between 16 to 18

inches and depth shall be between 20-22 inches. The sofa shall have solid wooden leg. Upholstery shall be of high quality Leatherite offer

the best feel & comfort.

2 Seater Sofa : Overall size shall be 1610 mm W x 1000 mm D x 880 mm H. Sofa inner frame structure shall be made from the combination of

treated solid wood and plywood having high quality webbing belts to ensure good strength, rigidity & stable construction to offer high

durability. There shall be extra padding between the armrest & the seat on both sides for better comfort & polyfilled in arms & backrest. The

polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density respectively. The manufacturer (OEM) shall have

11 ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table 2 SEATER SOFA 1.00 42,000.00 42,000.00

category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .Seat to backrest

angle should be ergonomically designed to offer the best seating comfort. Seat height shall be normally between 16 to 18 inches and depth

shall be between 20-22 inches. The sofa shall have solid wooden leg. Upholstery shall be of high quality Leatherite offer the best feel &

Centre table Size

The overall size of the Centre table shall be 1050 mm Length x 550 mm depth, 450 mm height. the table top shall be made up of 18mm thick

prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC

lipping glued with hotmelt Eva glue free from any VOC. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001

12 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, 1.00 9,331.44 9,331.44

Storage & tables, IGBC Gold rated factory certification, AIOTA certification The Gas Lift used shall be class 4 tested as per ANSI BIFMA

standards. .Under Structure Support: Table top shall be supported on CRCA legs duly powder coated. The understructure should be provided

with 32mm by 1.6mm thickenss swaged tube from 32mm top and 19mm bottom. The edges of the table top shall be rounded & edges shall

not be sharp. The legs shall be in angular design & thicker on the top & thinner on the boattom side.

Side Table :-The overall size of the Centre table shall be dia 600mm, 450 mm height. the table top shall be made up of 18mm thick

prelaminated particle board of approved shade All the edges of discussion surface shall be provided with machine pressed 2mm thick PVC

lipping glued with hotmelt Eva glue free from any VOC. Under Structure Support: Table top shall be supported on CRCA legs duly powder

coated. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level

13 METAL SIDE TABLE 1.00 8,054.68 8,054.68

2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory

certification, AIOTA certificationThe table understructure should be provided with 32mm by 1.6mm thickenss swaged tube from 32mm top

and 19mm bottom. The edges of the table top shall be rounded & edges shall not be sharp. The legs shall be in angular design & thicker on

the top & thinner on the bottom side.

Multipurpose Chair :-The overall size of Chair shall be : Width should be 540 +/-5mm and depth should be 600 +/-5mm. Total height 875 +/-5

mm, Back Width 420mm at Top and 485mm at bottom, Seat Width 495 +/-5 mm, Seat Depth 460+/-5 mm and Seat height 490mm +/-5mm .

Seat should be made up of PRE Mouled foam at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall

be upholstered with fabric of 100% polyster with 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within one hour of

placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used.The manufacturer (OEM) shall have ISO 9001,

MULTIPURPOSE HALL

14 ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, 10.00 10,400.00 104,000.00

Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification The chair shall be supplied

with injuction moulded Back rest with material of PPGF20%. The Chair understructure should be provided with 25.4x1.6 mm thickness Round

tube. understructure shall connected with 4nos of injection moulded ABS shoes. Understructure shall powder coated upto 40microns.Fixed

arms connected to Back rest with Textured arm pad with size of 290x38x3.5mm. Tolerance of +/- 5mm to be considered for product sizes i.e

Length, Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

Main Table of size 1800 x 750 x740 (WDH) with side unit size of 900 x 450 x 750mm(LDH) & back storage in size of 1800 x 450 x 750 (WDH)mm.

The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm

thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty shall be connected with 3 nos L-

shape pressure aluminium die casted connector. MOdesty height shall be 450mm .The understructure shall be made of 18mm thick prelam

partical board with 2mm pvc edge band all the visible side.Wire Management: 300 mm Anodised flip up Made of Aluminum in anodised

finish, that shall have soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry.

The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA

certification .Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer &

filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered

profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on

automatic machine. Suitable lock shall be provided.

Digitally signed by AMIT

Main Table of size 1800 x 750 x740 (WDH) with side unit size of 900 x 450 x 750mm(LDH) & back storage in size of 1800 x 450 x 750 (WDH)mm.

The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm

thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty shall be connected with 3 nos L-

shape pressure aluminium die casted connector. MOdesty height shall be 450mm .The understructure shall be made of 18mm thick prelam

partical board with 2mm pvc edge band all the visible side.Wire Management: 300 mm Anodised flip up Made of Aluminum in anodised

finish, that shall have soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry.

The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA

certification .Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer &

filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered

profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on

automatic machine. Suitable lock shall be provided.

Main Table of size 1500 x 750 x740 (WDH) with side unit size of 900 x 450 x 750mm(LDH) & back storage in size of 2100 x 450 x 750 (WDH)mm.

The worktop shall be made up of 25mm thick PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm

thick pre laminated partical boards with E1 norms and all visible side 2mm pvc edge bending. Modesty shall be connected with 3 nos L-

shape pressure aluminium die casted connector. MOdesty height shall be 450mm .The understructure shall be made of 18mm thick prelam

partical board with 2mm pvc edge band all the visible side.Wire Management: 300 mm Anodised flip up Made of Aluminum in anodised

finish, that shall have soft closure and three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry.

The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA

certification .Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer &

filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered

profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on

automatic machine. Suitable lock shall be provided.

Back storage of size 2100 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer & filling units/

shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of

6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic

machine. Suitable lock shall be provided.

Main Table of size 1500 x 750 x740 (WDH) with side storage size of 900 x 450 x 750mm(LDH) . The worktop shall be made up of 25mm thick

PLPB E1 norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm thick pre laminated partical boards with E1

norms and all visible side 2mm pvc edge bending. Modesty shall be connected with 3 nos L-shape pressure aluminium die casted

connector. MOdesty height shall be 450mm .The understructure shall be made of 18mm thick prelam partical board with 2mm pvc edge

band all the visible side.Wire Management: 300 mm Anodised flip up Made of Aluminum in anodised finish, that shall have soft closure and

three way wire acess & PVC cable tray. For entry of cables from the floor into the cable tray, Wire Entry. The manufacturer (OEM) shall have

18 INTERACTIVE TABLE 2.00 46,610.00 93,220.00

ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table

category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .Side storage of

size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1 norms composite having two drawer & filling units/ shutters. back panel

made up of 9mm thickn PLPB E1 norms. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight surface

& 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable lock

shall be provided.

High Back Chair :-The overall size of Chair shall be : width 600 +/-5mm, depth 640 +/-5mm. Total height 1170 to 1270 +/-5 mm, Back Width 425

mm at Top and 500mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 470+/-5 mm and Seat height 470mm to 570 mm +/-5mm range. Seat

made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be uplhostered

with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair

shall be supplied with Mesh Back rest. The back frame shall be made up of Injection molded PPGF 20%. PU Adjustable Lumbar Support full

length of size 365 mm, 110 mm height and 25mm thickness. The Chair should be provided with Self Calibrating Multilock Mechanism that

should adjust the tension of the back sensing weight of the user. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO PA + AFRRO AND AD

19 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for + INTERACTIVE TABLE 5.00 15,658.26 78,291.30

Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification.The mechanism shall allow 360 degree revolving feature HIGH BACK CHAIR

along with height adjustablility. One Way Adjustable Arms (Height) to be provied with height adjustment button of size 73mm x 18mm made

of Delrin P 500. The mechansim shall possess seat to back recline ratio of 3:7. The Gas Lift used shall be class 4 tested as per ANSI BIFMA

standards. Nylon base shall be provided.Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA X 5.1 2017 standards. The base

shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with bottom ribbing for additional buttress

and strength.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be considered in

pipe thickness & Pipe sizes.

Digitally signed by AMIT

The overall size of Chair shall be : Total height 830 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat

Depth 440+/-5 mm and Seat height 420mm +/-5mm . And over all chair width should be 560 +/-5mm and Overall chair depth should be 600

+/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400.

Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within

one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The manufacturer (OEM) shall

20 INTERACTIVE TABLE 12.00 9,800.00 117,600.00

have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table

HIGH BACK CHAIR

category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The chair shall be

supplied with black Mesh Back rest. The Chair should be provided with 22 dia x 1.6 oval tube understructure shall connected with 4 PVC leg

shoes. Understructure shall powder coated upto 40microns. PP Fixed arms connected to seat and back. The armrests shall be fixed with seat

& back in such a way that the contour of the back matches the contour of back frame. Chair backrest frame shall be injection molded

PPGF 20% in black shade, armrest shall also be in black shade.

The overall size of chair shall be 560 x 570 x 750mm (LDH).The seating of chair shall be 450mm.The seat and backrest shall be made from a

single piece of injection-molded PPGF 20% material. The seat width shall be 420 mm. The seat depth shall be 440 mm, and the junction

between the seat and back shall feature a radius to provide enhanced lumbar support.The thickness of the seat and back shell shall be

9mm ± 0.25 mm.The understructure of chair shall have 2 U-shaped legs. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 &

21 ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification 4.00 10,148.00 40,592.00

for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The chair legs shall be D'shaped MS tube having cross

section of 40x26x1.6mm thick.These 2 U-shaped leg shall be connected to 2 rectangular beam having cross section of 30x20x1.6mm

thick.Frame shall be welded by Co2 welding process for uniform finish conforming to IS 816.Leg Bush shall be provided in D-shaped to

protect from ensure smooth, scratch-free. Understructure shall powder coated upto 40 to 60microns with wooden shade.

The overall size of the table shall be 600 DIA x 450 H mm. The top surface of the table shall be in boat shape design having maximum size at

the middle & lesser at the ends to form this unique shape. The table top shall be made up of 18mm thick Prelaminated particle board of E1

norms. The edges shall be sealed properly with 2mm thick PVC edge banding on automatic machine. The manufacturer (OEM) shall have

ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table

category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The

22 understructure of the table shall be made from solid wood i.e properly treated & seasoned kiln dried beach wood, finished with clear 2.00 10,801.72 21,603.44

synthetic PU coating for the best resilence and high durability. The legs and the frame shall be joined together by method of tenon and

mortise for durability and better aesthetics. Four legs shall be provided and the cross section of leg at the bottom shall be 35x35 and top shall

be 55x35 provided in tappered finish for better looks. The outer side of the legs shall be rounded & inner side shall be corner edges. The

wooden frame shall be of size 55mm x 22mm thick with visible face of 55 mm front and 22mm shall be below the table top running at all four

ends as well as one support in the middle.

The overall size of workstation shall be 1200L x 600D x 1200H. workstations of overall panel thickness 65 mm (+/-5mm) and height of 1200mm

(+/- 5mm).The partition shall be provided at the main and end to of cluster and in intermediate 18mm thick gable shall be provided. The

worktop shall be made up of 25mm E1 norm PLPB with matching PVC edge band 2mm thick. The worktop shall be provided with 65mm

gromet cut & shall be supported on CRCA bracket with one side fixed on rectangular slot of frame vertical and other side to worksurface.

The partition frame shall be made up of nonferrous 6063 grade aluminium alloy confirming to DIN ISO-2768-1 & fabricated through weldless

technology & fitted with pre moulded M8 levellers zinc passivated for height adjustment. Frame shall have vertical & horizontal members,

vertical channels have inbuilt groove with rectangular slots to fix cantilever / gable end brackets. Frame to frame shall be attached through

male/ female hook mechanism pressure die casted parts made in zinc alloy Mazak5. Adequate ribs to be given in extrusion profiles having

variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post shall be attached by male/female hooks made up of 2mm

thick CRCA material zinc passivated to 10-12 microns. Each frame shall be fitted with tiles, male & female hooks, two end cap at top and

bottom. Bottom caps shall be provided with leveller fixing arrangement. all caps shall be of aluminium ADC-12 pressure die cast. top trip

shall be flat aluminium confirming to DIN ISO-2768-1. The data & power cables provision to be given at different levels. skirting raceways shall WORKSTATION WITH

be designed for snap fitting for data cables and for power cables raceway below worktop shall be provided. Tiles of overall thickness 6mm PEDESTAL

thickness constructed out of PLPB E-1 norms upholstered with fabric or Laminated tile should be slide to the grooves provided in aluminium

frame vertically, two tiles on either side of the frame to complete the assembly.The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO

45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard

certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification

Mobile Drawer Unit : It shall be of size of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1 norms and

its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of 18mm, back 9

mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer side surface shall be

provided with finger groove handle-less design. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight

surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Suitable

lock shall be provided. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and tolerance of 5% to be

considered in pipe thickness & Pipe sizes.

Digitally signed by AMIT

Mid Back Chair :-The overall size of Chair shall be height 1020 to 1120 +/-5 mm, width should be 595 +/-5mm and depth should be 640 +/-

5mm. Back Width 435 mm at Top and 490mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 465+/-5 mm and Seat height 450mm to 550

mm +/-5mm range. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming

to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering

within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be

supplied with Mesh at the back rest. The back frame shall be made up of injection molded nylon GF 3. Adjustable Lumbar Support of size 300

mm lenght, 150 mm height and 3mm thickness travel upto 65mm. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO

24 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for 12.00 11,894.40 142,732.80

Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification The Chair should be provided with Snchyro mechanism

with single lever with one position lock. The mechanism shall allow360 degree revolving feature along with height adjustablility one Way with

height adjustment button made of Delrin P 500 & arm top shall be PU material. The mechansim shall possess seat to back recline ratio of 3:7.

The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material

complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass

filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e Length,

Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

Main Table of size 1200 x 600 x750 (WDH) with side unit size of 900 x 450 x 750mm(LDH).The worktop shall be made up of 25mm thick PLPB E1

norms duly finished with 2mm pvc edge band. The Modesty shall be made of 18mm thick pre laminated partical boards with E1 norms and

all visible side 2mm pvc edge bending. Modesty height shall be 450mm .The understructure shall be made of 18mm thick prelam partical

board with 2mm pvc edge band all the visible side. Side storage of size 900 x 450 x 750 H to be provided made up of 18mm thick PLPB E1

norms composite having two drawer & filling units/ shutters. back panel made up of 9mm thickn PLPB E1 norms. Finger groove shall be

created by providing a reverse tapered profile edge of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed

with minimum 2mm thick PVC lipping on automatic machine. Suitable lock shall be provided. The manufacturer (OEM) shall have ISO 9001,

ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category,

Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification

The partition shall be provided at the side of the table.The partition frame shall be made up of nonferrous 6063 grade aluminium alloy

25 confirming to DIN ISO-2768-1 & fabricated through weldless technology & fitted with pre moulded M8 levellers zinc passivated for height HELP DESK TABLE 4.00 51,408.70 205,634.78

adjustment. Frame shall have vertical & horizontal members, vertical channels have inbuilt groove with rectangular slots to fix cantilever /

gable end brackets. Frame to frame shall be attached through male/ female hook mechanism pressure die casted parts made in zinc alloy

Mazak5. Adequate ribs to be given in extrusion profiles having variable thicknesses of 1.10mm to 2.50mm for better durability. Frame to post

shall be attached by male/female hooks made up of 2mm thick CRCA material zinc passivated to 10-12 microns. Each frame shall be fitted

with tiles, male & female hooks, two end cap at top and bottom. Bottom caps shall be provided with leveller fixing arrangement. all caps

shall be of aluminium ADC-12 pressure die cast. top trip shall be flat aluminium confirming to DIN ISO-2768-1. The data & power cables

provision to be given at different levels. skirting raceways shall be designed for snap fitting for data cables and for power cables raceway

below worktop shall be provided. Tiles of overall thickness 6mm thickness constructed out of PLPB E-1 norms upholstered with fabric or

Laminated tile should be slide to the grooves provided in aluminium frame vertically, two tiles on either side of the frame to complete the

Mid Back Chair :-The overall size of Chair shall be height 1020 to 1120 +/-5 mm, width should be 595 +/-5mm and depth should be 640 +/-

5mm. Back Width 435 mm at Top and 490mm at bottom, Seat Width 500 +/-5 mm, Seat Depth 465+/-5 mm and Seat height 450mm to 550

mm +/-5mm range. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming

to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering

within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The chair shall be

supplied with Mesh at the back rest. The back frame shall be made up of injection molded nylon GF 3. Adjustable Lumbar Support of size 300

mm lenght, 150 mm height and 3mm thickness travel upto 65mm. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO

26 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for HELP DESK CHAIR 4.00 11,894.40 47,577.60

Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification The Chair should be provided with Snchyro mechanism

with single lever with one position lock. The mechanism shall allow360 degree revolving feature along with height adjustablility one Way with

height adjustment button made of Delrin P 500 & arm top shall be PU material. The mechansim shall possess seat to back recline ratio of 3:7.

The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material

complying to ANSI/ BIFMA X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass

filled reinforced with bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for product sizes i.e Length,

Depth & height and tolerance of 5% to be considered in pipe thickness & Pipe sizes.

The overall size of Chair shall be : Total height 830 +/-5 mm, Back Width 415 mm at Top and 450mm at bottom, Seat Width 480 +/-5 mm, Seat

Depth 440+/-5 mm and Seat height 420mm +/-5mm . And over all chair width should be 560 +/-5mm and Overall chair depth should be 600

+/-5mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400.

Seat shall be uplhostered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No flamming or progressive smoldering within

one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match) should be used. The manufacturer (OEM) shall HELP DESK VISITOR

have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table CHAIR

category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The chair shall be

supplied with black Mesh Back rest. The Chair should be provided with 22 dia x 1.6 oval tube understructure shall connected with 4 PVC leg

shoes. Understructure shall powder coated upto 40microns. PP Fixed arms connected to seat and back. The armrests shall be fixed with seat

& back in such a way that the contour of the back matches the contour of back frame. Chair backrest frame shall be injection molded

PPGF 20% in black shade, armrest shall also be in black shade.

Digitally signed by AMIT

The chair shall be made from a single-piece injection-molded polypropylene material with a half-round back contour to offer enhanced

comfort and support. The overall width of the chair shall be 500 mm, depth 530 mm, and height 800 mm. The seat height from the floor shall

range from 435 mm, and the back height from the seat shall be 400 mm. The backrest will feature a half-round contour, with a lumbar width

from end to end at lumbar level shall be at least 450 mm and a top width of 430 mm. The manufacturer (OEM) shall have ISO 9001, ISO

14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green

Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certificationThe front of the seat will include a

waterfall edge with a minimum height of 25 mm. The seat width, measured from the center, shall be 440 mm, with a depth of 400 mm. The

backrest will be perforated with a triangular pattern for ventilation and flexibility. Ribs beneath the seat, extending from front to back, will

have a minimum height of 12 mm to enhance stability. The thickness of the chair at the various polypropylene edges shall range from 7 mm,

8mm, 9mm respectively.

The overall size of table shall be 1800L x 900D x 750H. The cafe table shall have the worksurface of the table shall be made up of 18mm thick

Prelam hydroshield top water resistant. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB

accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables,

IGBC Gold rated factory certification, AIOTA certification .The understructure shall be made up of CRCA steel tube. The table shall have two

fixed tube in the end side with duly chrome plated and having 2 legs provided with polymer studs. The table top shall have provision to fold

it when not in used.

The overall size of Medium height storage shall be 1200 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle

board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made

up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

30 Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA MEDIUM STORAGE 3.00 24,982.96 74,948.88

certificationAll exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

The overall size of Medium height storage shall be 600 x 450 x 1200 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle

board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made

up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

31 Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA STORAGES 3.00 10,030.00 30,090.00

certificationAll exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

The overall size of Medium height storage shall be 750 x 450 x 750 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle

board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made

up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

32 Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA STORAGES 3.00 8,732.00 26,196.00

certificationAll exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

The overall size of full height storage shall be 900 x 450 x 2100 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board

E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of

18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

33 Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA 3.00 26,233.76 78,701.28

certificationAll exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

Digitally signed by AMIT

The overall size of full height storage shall be 5400 x 450 x 2100 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle

board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made

up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

34 Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA 1.00 153,402.56 153,402.56

certificationAll exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

The overall size of full height storage shall be 1050 x 450 x 2100 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle

board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made

up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: The

manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India

35 Design Mark for Chairs & table category, Green Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA 1.00 30,604.48 30,604.48

certificationAll exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

The overall size of overhead storage shall be 3600 x 360 x 600 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board

E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of

18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable shelf. Edge: All

exposed shall be sealed with 2mm thick PVC edge lipping. The manufacturer (OEM) shall have ISO 9001, ISO 14001, ISO 45001 & ISO 50001

36 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green Guard certification for Chairs, 3.00 47,088.00 141,264.00

Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The hinged doors top shall be provided with finger groove

handle-less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight

surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam

Lock faciltity should be provided for safe storage of documents.

The overall size of overhead storage shall be 2100 x 360 x 600 (WDH) mm. Top shall be made up of 18mm thick pre laminated particle board

E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters shall be made up of

18 mm thick pre laminated particle board. Shutters to be provied for compartment. . The manufacturer (OEM) shall have ISO 9001, ISO

14001, ISO 45001 & ISO 50001 issued from NABCB accredited agency, BIFMA Level 2, India Design Mark for Chairs & table category, Green

37 Guard certification for Chairs, Storage & tables, IGBC Gold rated factory certification, AIOTA certification .The storage shall have adjustable 3.00 35,046.00 105,138.00

shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove handle-

less design for a streamlined look. Finger gAroove shall be created by providing a reverse tapered profile edge of 6mm straight surface & 12

mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam Lock faciltity

should be provided for safe storage of documents.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

BOQ FOR PLUMBING & FIRE FIGHTING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 0.00 76,533.00

B WATER SUPPLY 23,800.45 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 62,077.70 2,300.00

D SPRINKLER PIPING & ACCESSORIES 304,228.00 88,870.00

Total Cost ( Carried Forward) in Rs. 557,809.15

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china single

trap syphonic pattern having back inlet, supporting chair, wall hung water

closet complete with all internal fittings/ accessories and CP brass flush bend

(European type) water closet with seat and lid, with C.P. brass hinges and

rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass screwed washers

including cutting and making good the walls and floors wherever required

and HDPE WC pan connector including jointing with white cement complete

in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid "Thermoset

moulded ( bakelite ) IS 2548 Part I

Supply, installation, testing and commissioning of concealed cistern including

2 MR flush plate and all internal fittings/ accessories including cutting and making Each 1 12,461.00 12,461.00

good the walls and floors wherever required complete in all respects.

Supply, installation, testing and commissioning of glazed vitreous china wash

basin with R.S. or C.I. brackets painted white, 32mm C.P. brass waste of

3 MR standard pattern , C.P brass wall flange 32 mm dia. C.P. brass bottle trap and

union 32 mm dia C.P. pipes to wall flange. complete including cutting and

making good the walls wherever required.

Undercounter wash basin Each 1 8,421.00 8,421.00

Supply, installation, testing and commissioning of 15mm C.P. brass single hole

4 MR wash basin mixer without popup waste system with 450mm long copper pipes Each 1 6,089.00 6,089.00

Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass

Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate

glass complete with 6mm thick marine ply sheet ground fixed to wooden

cleats with CP brass screws and washerswith 40 mm wide teak wood frame as

per design including polishing

Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC

tube and wall hook CP brass wall flange

Providing & fixing, testing and commissioning of storage type electric water

heater with automatic thermostatic control electric element, pressure release

valve, brackets fixed to expansion fasteners with M.S. nuts and bolts all

complete including cutting and making good the walls wherever required.

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 1 12,085.00 12,085.00

Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of

approved quality.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

BOQ FOR PLUMBING & FIRE FIGHTING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Detail of Sanitary fixture are for the information of the Contractor,however

i. model/makes of all sanitary fixtures shall be selected by Architect/Interior

designer/Project manager and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of sanitary fixtures.

Contractor to receive all the above mentioned items & store at place as

directed at site.

TOTAL CARRIED OVER TO SUMMARY 76,533.00

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

DSR Rate DSR Amount NS Amount

SL. NO. DSR /NS DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.)

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot &

cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.3 25 mm nominal outer dia pipes. Metre 5.00 401.55 2,007.75

18.7.4 32 mm nominal outer dia pipes. Metre 5.00 518.75 2,593.75

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot &

cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with

2 18.8 clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the the same including testing of

joints complete as per direction of engineer in charge.

Concealed work oncluding cutting chases and making good the walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 10.00 537.60 5,376.00

18.8.3 25 mm nominal dia Pipes Metre 10.00 627.25 6,272.50

18.8.4 32 mm nominal dia Pipes Metre 5.00 739.30 3,696.50

3 18.16 Providing and fixing brass stop cock of approved quality complete.

18.16.2 20 mm nominal bore Each 1.00 379.20 379.20

4 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):

18.17.2 32 mm nominal bore Each 1.00 689.95 689.95

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality

conforming to I.S:8931 a) 15 mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of

approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 4.00 121.90 487.60

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 23,800.45

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.)

Providing and fixing cast iron trap of self cleansing design with cast

iron screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the walls and

100 mm inlet and 100 mm outlet centrifugally cast (spun) iron S&S as

2 17.35 Providing and fixing soil, waste and vent pipes.

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.1.2 100mm dia cast (spun) iron S&S pipe Metre 10.00 1,151.90 11,519.00

Centrifugally cast (spun) iron S&S pipe as per IS 3989.

17.35.2.2 75mm dia cast (spun) iron S&S pipe Metre 10.00 1,186.00 11,860.00

Providing and fixing single equal plain junction of reqd. degree with

3 17.43 access door, insertion rubber washer 3mm thick, bolts and nuts

17.43.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 925.70 1,851.40

17.43.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 665.05 1,330.10

4 17.44 Providing and fixing single equal plain junction of reqd. degree.

17.44.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 811.90 1,623.80

17.44.2.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 561.20 1,122.40

Providing and fixing bend of required degree with access door,

insertion rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 705.20 1,410.40

17.38.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 522.80 1,045.60

6 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 470.45 940.90

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.)

17.39.2.2 Sand cast (spun) iron pipe S&S as per IS 3989. Each 2.00 390.50 781.00

7 17.57 Providing and fixing collar.

17.57.1.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 513.15 1,026.30

17.57.2.2 Sand cast (spun) iron pipe S&S IS-3989 Each 2.00 362.05 724.10

Providing and fixing G.I. Pipes complete with G.I. Fittings and

clamps. including cutting and making good the walls etc.

18.10.4 32 mm nominal bore Metre 10.00 667.00 6,670.00

18.10.5 40 mm nominal bore Metre 10.00 811.90 8,119.00

Painting G.I. Pipes and fittings with two coats of anticorrosive

bitumastic paint of approved quality

18.40.4 32 mm nominal bore Metre 10.00 22.20 222.00

18.40.5 40 mm nominal bore Metre 10.00 25.25 252.50

Painting sand cast iron / centrifugally cast iron( spun) iron soil, waste

and vent pipes and fittings with paint of any colour such as

chocolate, grey or buff etc. over a coat of primer (of approval

quality) for new work

17.65.1 100mm dia cast (spun) iron S&S pipe Metre 10.00 82.80 828.00

17.65.2 75mm dia cast (spun) iron S&S pipe Metre 10.00 62.95 629.50

Providing and fixing G.I. Inlet fitting of suitable size with 2 & 3 Nos. G.I.

11 NS Socket 32 & 40 welded G.I. pipe and dipped in hot bitumen

complete in all respect.

100 mm diameter pipe (Hopper ) Each 2.00 1,150.00 2,300.00

Providing lead caulked joints to sand cast iron/centrifugally

cast(spun) iron pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement

mortar 1:2(1 cement: 2 fine sand) in SCI/CI pipes.

14 17.48 Providing and fixing single unequal plain junction of reqd. degree.

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR Amount NS Amount

DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Rate (Rs.) NS Rate (Rs.)

17.48.1.2 Sand cast (spun) iron pipe IS-3989 Each 2.00 1,032.40 2,064.80

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 62,077.70 2,300.00

Digitally signed by AMIT

D- SPRINKLER PIPING & ACCESSORIES

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including Welding, fittings

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame

and painting with two or more coats of synthetic enamel paint of

required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/ gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets conforming to IS 13095

of following sizes as required :

Providing and fixing ISI Marked of approved make Fire

3 NS Extinguishers complete with all accessories as per manufacturer's

specifications.

3.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 2.00 13,940.00 27,880.00

3.2 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 2.00 3,153.00 6,306.00

3.3 ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 6.00 2,796.00 16,776.00

Providing, fixing, testing & commissioning of 15mm dia quartzoid

4 18.21 bulb type sprinklers of rating 68 degree centigrade with required

4.1 18.21.4 Concealed Sprinkler Each 52.00 1,435.00 74,620.00

Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on reducer

thread with maximum working pressure of 175 PSI test pressure of

5 18.25 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with reducer,

nipple, 2 side brackets, center bracket, stockbar of following sizes

complete as required.

Digitally signed by AMIT

D- SPRINKLER PIPING & ACCESSORIES

SL. NO. DSR DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing and fixing signages printed on photoluminescent U1000

aluminium sheet of 1.0 mm (+ -10%) containing lumigen II as base

chemical, covered under UV stablized coating and of

appropriate size including fixing on wall, door, ceiling etc. with

proper clamps, hangers, cleats anchor fasteners etc. complete in

all respects as diercted by Engineer-in-charge

Providing, jointing and testing of automaticaly operated Halotron

7 NS fire extinguishers(cap-5kg,temperature rating - 68 degc,test NOS. 1.00 16,308.00 16,308.00

pressure-30bar) complete with all accessories/ fittings.

TOTAL CARRIED TO SUMMARY 304,228.00 88,870.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

BOQ FOR VRV WORKS

Sr. No. DSR E&M 2025 DESCRIPTION OF ITEM UNIT QTY. DSR RATE NDSR RATE DSR AMOUNT NDSR AMOUNT

VRV OUTDOOR UNIT

Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling/heating

having 100% hermetically sealed inverter type twin Rotary/Scroll

Compressor(s),minimum two compressors (with individual separate PCB) for above 14HP

modules, microprocessor based Controller, top discharge type condensing unit(s), with

R-410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc.

complete as required. To have better efficiency condenser fan shall be capable to

operate at different speed with respect to load.The unit shall deliver the rated capacity

and in confirmation as per IS 18728:2024 and CPWD Specifications and work even at

50°C ambient temperature without tripping. The system shall be able to deliver 100% of

the rated capacity upto 39 °C. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first

charge of the refrigerant and ready for use as required. The condenser should be

coated with a hydrophilic film to prevent water accumulation on the surface of the

heat exchanger, enhance water dispersion, and reduce the risk of degradation,

thereby improving overall performance and durability. The Indian Seasonal Energy

Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and Sustainable

Building Code (ECSBC) 2024 as below and complete as per CPWD specification,

connections, inter connections etc. as required. (For capacity <40 kWr ISEER 7.4,

Capacity > 40 and <70 ISEER 7.5, Capacity > 70 ISEER 7.6 for Super ECSBC Building)

For Cooling or Heating or Both

VRV INDOOR UNIT

Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed

motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain

pump, grill, necessary supports, vibration Isolation, Corded remote control etc., suitable

for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The

Indoor units must shut down upon receiving a singal from the BMS System/Fire Singnals.

The system shall be capable to adjust air flow as per room requirement in auto mode.

The cooling capacity of indoor unit will be at air inlet conditions of 27 0C DB and 19 0C

WB temperature. (Make will be same as of Outdoor)

Digitally signed by AMIT

Supplying, Installation, Testing and Commissioning of following minimum capacity High

wall type Indoor unit equipped with and comfort washable synthetic media prefilter,

fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote

control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50

Hz, single phase AC supply, complete as required. The Indoor units must shut down upon

receiving a singal from the BMS System/Fire Singnals. The system shall be capable to

adjust air flow as per room requirement automatically. The cooling capacity of indoor

unit will be at air inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be

same as of Outdoor)

Supplying, Installation, Testing and Commissioning of Y/T/Multi Joints. Joints shall be of

same Original Equipment Manufacturer (OEM) make as of ODUs and IDUs

4.2 31.13.2 Outdoor Multi Joint Each 3.00 8,098.00 24,294.00

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen

testing of following nominal sizes of soft/hard drawn copper refrigerant piping for

VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger

4 31.14 supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular

insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of

19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required :

4.1 31.14.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 35.00 256.00 8,960.00

4.2 31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 45.00 346.00 15,570.00

4.3 31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 45.00 487.00 21,915.00

4.4 31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm MTR. 55.00 615.00 33,825.00

4.5 31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 70.00 739.00 51,730.00

4.6 31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 70.00 904.00 63,280.00

4.7 31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 90.00 1,068.00 96,120.00

4.8 31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm MTR. 90.00 1,157.00 104,130.00

4.9 31.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 100.00 1,222.00 122,200.00

74.10 31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 100.00 1,286.00 128,600.00

74.11 31.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 125.00 1,322.00 165,250.00

74.12 31.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm MTR. 150.00 1,368.00 205,200.00

Providing and fixing rigid 25mm UPVC piping complete with fittings, supports, adjustable

5 MR hangers as per specifications and duly insulated with 9 mm thick closed cell nitrile

rubber insulation etc complete as required.

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in

suitable conduits between indoor and outdoor unit.

7 MR Timer for Split AC for Server Nos 1.00 3,880.00 3,880.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

SUB HEAD NDSR AMOUNT (Rs.) DSR AMOUNT (Rs.)

1 MAIN PANEL & DISTRIBUTION BOARD Rs. 271,249 Rs. 131,978

2 CABELS / MAINS Rs. 388,538 Rs. 3,367

4 LIGHTING FIXTURES Rs. 377,323 Rs. 114,036

5 WIRING FOR DATA AND VOICE OUTLETS Rs. 491,920 Rs. 310,348

6 CABLE TRAY & RACE WAY. Rs. 174,690 Rs. 143,610

7 UPS SYSTEM Rs. - Rs. 341,772

8 FIRE ALARM & PA SYSTEM Rs. - Rs. 555,829

GRAND TOTAL Rs. 4,599,220

GRAND TOTAL Rs. 4,599,220

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

1 MAIN PANEL & DISTRIBUTION BOARD

Supply,installation,testing and commissing of 3phase and neutral 415V 4 wire free standing

floor mounted indoor MV panel made out of 14 SWG sheet after seven tank process and

painting with epoxy powder coating MV electrical panel shall be dust and vermin proof

,hinged and locable doors.The panel shall consist of suitable rating TPN bus bar at the rating

1.1 of 0.8A /SQMM Supported by DMC/SMC insulator and color coded with heat shrinkable

sleeves. Metering shall be provided as specified .The panel shall have short circuiting with

standing capacity of minimum 36KA and consist of the switch gear as mentioned below .The

panel shall got fabricated from manufacturer with CPRI test certificate .The panel shall be

mounted on U channel including supply and fixing of the same.(including Capacitor banks)

− 200 Amps 4P On Load change over switch. -1No.

− Spreaders-1Set.

− Extended Rotary Operating Mechanism.-1Set

Digital VA F Meter with built in Selector Switch, CTs, CT shorting links, R/Y/B LED indicating

lamps and control SP MCBs.

− ELR, CBCT, VIF, SPD

Outgoing Section

− 8 Step Automatic Power Factor Correction Relay (Digital)_1 No

− 63 Amps FP MCB_C curve -3Nos.

− 40 Amps 4P MCB -2Nos.

− 25 Amps 4P MCB -2Nos.

− 25 Amps DP MCB -2Nos.

− 10 kVAR capacitor duty Contactor with 220 V AC Coil_3 Nos

− 5 kVAR capacitor duty Contactor with 220 V AC Coil_4 Nos

− ON / OFF LED Indicating Lamps _7Set

− Start / Stop Push Buttons_7Set

− A/M Selector Switch_1 No

− Control S/P MCB (2/4 A)_7 Nos

− Neutral Links_7 Nos

− Control Blocks_7 Nos

Enclosure, 250A TPN 415V 50Hz Electrolytic grade AL conductor Busbar with 100% neutal&

− Non adhesive PVC insulated heat shrinkable sleeves, Internal Wiring, Terminals, etc.as SET 1.00 238,783.00 238,783.00

1.2 Supplying the following MCCBs in sheet steel enclosure. For Ups Input & Output

63A 4P MCCB in sheet steel enclosure surface mounted on the wall along with incoming &

outgoing Cable Box, suitable for Termination of Aluminium / Copper Cable. (For Ups)

1.2 DISTRIBUTION BOARDS.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator).

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN

MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200

1.4 2.5 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but

without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used

where 3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

1.5 2.10 suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.10.5 Triple pole and neutral EACH 2.00 1,301.00 2,602.00

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, MCB in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual

1.7 2.14 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

1.8 2.15 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying Installation, Testing and Commissioning of following capacity TPN tap off box

made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing

rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc.

Total of Main Panel/ DB carried over to summary 271,249.00 131,978.00

2.0 CABELS / MAINS

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector /

circular shaped aluminium / copper conductor PVC insulated cores under ground PVC

2.1 tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed

confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route shown

at site and further as directed by Engineer-in charge

a MR 120 Sq.mm 3 1/2 core Aluminium cable mtr. 100.00 2,833.00 283,300.00

b MR 35 Sq.mm 3 1/2 core Aluminium cable mtr. 10.00 686.00 6,860.00

c MR 16Sq.mm 4 core copper cable mtr. 100.00 503.00 50,300.00

d MR 25Sq.mm 4 core copper cable mtr. 10.00 612.00 6,120.00

e MR 4 Sq.mm 3 core Copper cable mtr. 150.00 260.00 39,000.00

Supply & fixing of end termination for above mentioned cables including compressed type

2.2 brass glands, crimping type coper lugs, insulation tape etc. as 'required complete with

earthing of glands in following sizes

Total of Cables / Mains carried over to summary 388,538.00 3,367.00

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose , and

anodised GI switch box with modular switch ,modular plate and the box covered with front

a 1.3.3 One light point controlled by one 6A switch Per Pts 65.00 1,845.00 119,925.00

b 1.54.3 Secondary light point controlled by same switch Per Pts 100.00 1,094.00 109,400.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

3.2 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as

3.3 1.3.3 Exhaust fan point including of ceiling rose near fan. Per Pts 1.00 1,845.00 1,845.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

3.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable Per Pts 20.00 1,981.00 39,620.00

GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 10.00 122.00 1,220.00

d 1.24.5 6 pin 15/16 A socket outlet Each 20.00 197.00 3,940.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

3.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 100.00 47.00 4,700.00

existing surface/ recessed steel/ PVC conduit as required.

3.9 MR Supplying and laying HDMI Cable with connector on both ends. Meter 50.00 81.00 4,050.00

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

3.10 1.20 including painting in case of surface conduit,or cutting the wall and making good the same

in case of recessed conduit as required

Supply and fixing of 3 nos. 6A socket with 6M modular GI box, base plate and cover plate

below worktop, along with 1no. 6A socket, 1 no. 6A switch and 1 no. 16A switch(for 3 nos.

sockets) in 4M modular GI box, base plate and cover plate above worktop complete as per

drawings and instructions of engineer in charge.

Total of Wiring carried over to summary 49,850.00 1,244,710.00

4 LIGHTING FIXTURES

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

SITC of 1'X4' recessed mounted Luminaire with Maximum 36 Watt with Lumen output of 3600

lumen. The product should be SMD based and have non integral isolated driver with 2KV

4.1 MR inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K burning hour Nos. 45.00 5,828.00 262,260.00

at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring should have

teflon coted multi strand wires and external wire should have PVC coated multistrand wires.

4.2 8.3 LED Down lighter (SMD Type) (System lumen efficacy >135lm/Watt)

Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter

(Round /square/Rectangular) SMD type of following body material with PMMA and

prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating

temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit

protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free,

(flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum

50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80

extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per ANSI Bin),

SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all

respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System

lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED

fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-

in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such

that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded

aluminium Body including trim .

4.3 8.5 LED Down lighter (COB Type) (System lumen efficacy ≥120 lm/Watt )

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter

(Round / square/ Rectangular) COB Type of following body material and construction as per

IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage

AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge

protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80 ,

UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5 %), life time (LED,

Driver & electrical circuitry), life time of minimum 50000 Burning Hours with, 70% of initial

Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not

more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures

Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its

own in house NABL lab setup for all testing facilities for LED fixtures. "complete in all respect

i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single

core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen

efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED

fixtures as per BIS shall be submitted Shape size and CCT shall be as approved by Engineer-in-

Charge as per requirement. (Thermal management: heat sink of aluminium housing such

that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded

aluminium Body including trim with Aluminium Reflector

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

4.4 8.8 LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body

material and construction as per IS : 10322 with driver as per the requirement with Driver

efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp

range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection,

THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker

should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning

Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K

/6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall be of relevant BIS

standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on

housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC

insulated copper conductor single core cable and earthing etc. as required with Minimum 5

year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report

and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall

be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat

sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

4.5 8.11 LED Batten light (System lumen efficacy >135 lm/Watt)

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of

following body material and construction as per IS : 10322 with driver (Replaceable) as per

the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency

50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short

& Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be

below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with

70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per

ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing

complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated

copper conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all

testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of

aluminium housing such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Supply, Installation, Testing and Commisioning of Suspended /surface/Recessed High

Efficiency 16-18W per meter Suspended LED Channel, Body made of Aluminium and Opal

Diffuser with homogeneous light distribution and without hotspots, System power , 40W, 230V,

2385X52X85H mm, Color Temperature 3000K/4000K/5700K, CRI>80, IP20, IK04, operating

4.6 MR voltage range 140-270Vac, operating temperature -10° to 45°C, PF>0.95, THD<10%, product RMT 20.00 5,655.00 113,100.00

efficacy>110lm/W, SDCM<5, L70B50@50000hrs, LED binning as per ANSI Bin C78.377A, 110°

shall be luminaire beam angle, drivers efficiency >86%, internal surge protection of >3.5kV,

LED make - Bridgelux, Seoul, Osram, Cree, The manufacturer shall provide LM79, LM80, TM21,

Photoboilogical safety as per IEC 62471, RoHS complaint, BIS both for fixture and drivers.

Providing & Fixing Heavy Duty 4 Blade, 15" Exhuast Fan complete with all hardware and

connectors etc., as per the direction of the engineer In charge

Total of Light Fixture carried over to summary 377,323.00 114,036.00

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

5 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-

III) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on

surface including cutting chases in the walls/floors and making good the same complete as

Supplying and drawing of CAT 6A UTP cable, 4 pair LAN Cable in the existing surface/

recessed Steel/ PVC conduit as required.

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI Box in

wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 26.00 148.00 3,848.00

5.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Single Faceplate, Single Port square plate having spring shuttered front

a access for preventing ingress of dust, dimension as per commercially available modular Nos. 14.00 101.00 1,414.00

office furniture.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for voice) or as required

b. square plate having spring shuttered front access for preventing ingress of dust, dimension as Nos. 26.00 101.00 2,626.00

per commercially available modular office furniture.

Supply, Installation, Testing & Commissioning of 6 core Armoured single Mode Fiber optic

cable, Central Lose Tube With Jelly Compound, Corrugated steel tape armoured, Heaving

1300 nm Wavelength in the existing surface/ recessed Steel/ PVC conduit etc. complete as

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm

annealed copper conductor PVC insulated and PVC sheathed armoured telephone cables

generally conforming to ITD S/WS-11-C and IS 1554 part I direct in ground /surface and / or in

existing pipe as required and includig making terminal joints, complete as required.

Supply, Installation, Testing & Commissioning of LED 24 Port loaded Cat 6 Jack Panel,

Staggered 24 Port panel with All port LED in 1U Rack Unit, Copper Alloyed Contact Material,

5.8 EIA 568A/B wired, PC + glass fiber, UL 94V-0, black color, Front Port Labeling, 22-24 Each 2.00 15,800.00 31,600.00

AWG Wire Accumulation etc.

complete as required.

Supply, Installation, Testing & Commissioning of CAT 6 Patch Cord LSZH 1 Mtr, 4 pair

26 AWG stranded copper wire, Pre-terminated with RJ45 plugs, Slim clear anti-snag slip

5.9 on boots, Suitable for EIA 568A or 568B wiring, UL® Listed, meets all TIA and ISO Each 35.00 408.00 14,280.00

requirements. Complete in all respect as required by site completion etc. complete

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Supply, Installation, Testing & Commissioning of CAT 6 Patch Cord LSZH 2 Mtr, 4 pair

26 AWG stranded copper wire, Pre-terminated with RJ45 plugs, Slim clear anti-snag slip

5.10 on boots, Suitable for EIA 568A or 568B wiring, UL® Listed, meets all TIA and ISO Each 35.00 560.00 19,600.00

requirements. Complete in all respect as required by site completion etc. complete

Supply, Installation, Testing & Commissioning of 24 Port fully loaded Line Interface Unit LIU,

19",1u Rack Mountable unit with splice Tray Holder, Cable Guide, Fiber

5.11 Management and Splicing of Pigtails and Fiber Cables Including Joints and Each 2.00 43,140.00 86,280.00

etc. complete as required.

SITC of 42U 800x1000 Server Rack with perforation, Glass Door, Cable management,

6/16A power strips- 2 nos, Castors, 4 fan for cooling, Rack should have shelves - 4 nos

Total of Data & Voice carried over to summary 491,920.00 310,348.00

6 CABLE TRAY & RACE WAY.

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels fabricated

out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats etc.complete with

6.1 providing of Anchor fastners and all necessary hardwares as required for fixing, including

cutting, bending, welding, drilling, bolting etc. as per design as required and painted with

one coat of primer and two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required for

fixing and including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI earth

strips complete as per specifications, as required and as below.

6.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth

wire complete as required including floor supports, bends, access boxes, tap off boxes and

cross over as per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

a) 300 mm wide x 38 mm deep raceway RM 10.00 2,476.00 24,760.00

b) 225 mm wide x 38 mm deep raceway RM 10.00 2,074.00 20,740.00

c) 150 mm wide x 38 mm deep raceway RM 30.00 1,490.00 44,700.00

d) 100 mm wide x 38 mm deep raceway RM 30.00 1,109.00 33,270.00

Providing and fixing 400 x 400 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Total of Raceway carried over to summary 174,690.00 143,610.00

8.1 26.2 Online UPS- Input supply: Three Phase, Output supply: Three Phase.

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity

Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online

double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or

addition of battery modules without shutting down the entire system) modular Power Supply

(UPS) system with N+1 modules (N denotes total number of modules required for rated

capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes

back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per

Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static

Bypass switch along with provision for manual bypass, suitable isolation transformer for

additional protection against neutral faults etc. UPS shall have inbuilt phase sequence

correction. The UPS systems offered are to be of the latest technology with Digital Control

Microprocessor based for reliable operation using Insulated Gate Bipolar

Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation).

The quality of design, manufacturing and inspection process should confirm to the relevant

Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems

shall be >96% while operating on battery mode and delivering quality power to the 100%

non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50

%load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS

cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and

output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however

UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall

be suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage:

3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output.

Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under

voltage over voltage, abnormal out voltage, battery over charging, output over current,

short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply

with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204

Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS.

Communication RS232/ RS485/ SNMP port open protocol for BMS integration, all hardware &

software for iOT Communication as per approved by Engineering in charge.

Digitally signed by AMIT

Name of Work: Interior and Fitout work for Bureau Of Immigration (FRRO) at Bhubaneshwar

S.No DSR Description Unit Qty Rate MR Amount DSR Amount

Required battery racks and interconnecting copper conductor cables of suitable size and

connectors and all required accessories are inclusive of the cost). This system must provide a

means for logging and alarming of all monitored points plus email notification. Forced air-

cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to

handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in

compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum)

(In-build 5 inch or more LC Display / LED) to display :

a) Input: Voltage, current, Frequency.

b) Bypass: Voltage, Frequency.

c) Output: Voltage, frequency, Current.

d) Battery: Voltage, Capacity.

e) Load: KVA, KW, Percentage.

f) Temperature: STS, Inverter, PFC.

g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000

events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit /

Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc.

h) Statistical Data: No. of power failures / Transfers to Bypass / Total Running time, etc.

i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS

Fault /Battery charging and discharging, overload, battery voltage and battery capacity.

j) Audible Alarms : Mains Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input

Over, Under Voltage, Output Over, Under Voltage, Battery Over, Under Voltage, Over Load

and short circuit, Over Temperature. The UPS should have QR code which should contain

drawing, test report OEM manual, Geo- Tag of manufacturing location etc

26.2.2 20KVA (Each Power module shall be < 10 KVA) each 1.00 341,772.00 341,772.00

Total of UPS SYSTEM carried over to summary 0.00 341,772.00

Digitally signed by AMIT

ESTIMATED COST FOR FA & PA SYSTEM

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES : MR. DSR.

Sr. No DSR Description Unit Qty Unit Rate Total amount Total amount

Sr. No DSR Description Unit Qty Unit Rate Total amount Total amount

Supplying, installation, testing and commissioning of micro processor based intelligent addressable

main fire alarm panel, central processing unit with the following loop modules and capable of

supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and

loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display

with touch screen or other keypad and minimum 4000 events history log in the non volatile memory

1 17.2.1 (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free

batteries with automatic charger. The panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice evacuation system (which is part of the

schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be

compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per

specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of

rise cum fixed tempreature thermistor complete with base as required.

4 17.2.15 Supplying, installation, testing & commissioning of addressable manual call point complete as required. Pcs 2.00 3,506.00 7,012.00

5 17.2.16 Supplying, installation, testing & commissioning of addressable strobe complete as required. Pcs 2.00 3,367.00 6,734.00

6 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. Pcs 2.00 3,270.00 6,540.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box

having two LED, metallic cover complete with all connections etc as required.

B CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper

conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at

240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS

enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

1 17.5.3 surface / recessed steel conduit of following pairs, cores and size including connections and

interconnections etc. as required.

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 120.00 54.00 6,480.00

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess including

2 1.20 painting in case of surface conduit,or cutting the wall and making good the same in case of recessed

conduit as required

Digitally signed by AMIT