REPAIR / MAINT TO ALL TYPE OF STEEL FURNITURE AND CHARPOY GI PIPE UNDER AGE (I) FATEHGARH

Amount

ALMIRAH LARGE (FD-1031, FD-391 / 67(M) & FD-1033)

Removal of existing unserviceable door shutter of Almirah large steel and providing new door shutter made out of 20 gauge MS sheet with two coat of synthetic enamel paint by using spray gun / machine over a coat of red oxide primer without disturbing adjoining parts and fix new door shutter as per drg and directed by EIC

Taking out of unserviceable handle of almirah large steel & S&F new CP handle 125 mm long of cast iron / zinc CP of Godrej pattern with new nut and bolts complete all as shown in drg and all as specified and directed.

Taking out old unserviceable locks of almirah large steel and S&F new locks (Make Godrej / Harrison / Link / Classic or as approved by the AGE(I) of 50mm, 6 lever of special type brass with new nut and bolts including two steel keys Godrej pattern complete all as specified and shown in drg and directed at site.

M&L for adjustment of the existing shelves by providing new clamps where they are missing to the almirah large steel with necessary painting as required complete all as specified and directed at site.

Taking out old unserviceable butt hinges of almirah large steel and S&F new MS butt hinges of 65 to 75 mm long heavy weight complete all as specified and as shown in drawing

Taking out old unserviceable /rusted legs of almirah large steel and S&F new legs made out of 20 guage MS sheet including welding and painting with two coat of synthetic enamel paint by using spray gun / machine over a coat of red oxide primer complete all as specified and shown in drg

Taking out old unserviceable/rusted shelves of almirah large steel and S&F new shelves made out of 20 guage MS sheet with two coat of synthetic enamel paint by using spray gun / machine over a coat of primer complete all as specified and as shown in drg.

Repair to dent, deshaped portion, Derusting and cleaning of rusted surfaces by sand paper including preparation of patches by applying putty on patches etc of almirah large and applying metalic putty on patches where required to obtain smooth surfaces and applying one coat AD silver gray/OG synthetic enamel paint of required finish by spray painting(by spray Gun) to internal and external surfaces of almirah larger complete all as specified and directed

Taking out u/s three way locking device mechanism from Almirah Large Steel & S&F new three way locking device mecanism duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drg.

Taking out u/s hanging rod from Almirah large steel & S&F new hanging rod 20 mm dia stainless steel chrominium plated conduit pipe of wall thickness 1.25 mm complete all as shown in drg and directed at site.

ALMIRAH MEDIUM STEEL / LOCKER STEEL (FD-1032, FD-127, FD-83, FD-1029 & FD-1034

Removal of existing unserviceable door shutter of Almirah medium steel and S&F new door shutter made out of 20 gauge MS sheet with two coat of synthetic enamel paint by using spray gun / machine over a coat of red oxide primer without disturbing adjoining parts and fix new door shutter complete as per drg and directed by EIC

Taking out of unserviceable handle of almirah medium steel/locker steel & S&F new CP handle 125mm long of cast iron/zinc CP of Godrej pattern with new nut and bolts complete all as shown in drg and directed at site.

Taking out old unserviceable locks of almirah medium steel / locker steel and S&F new locks (Make Godrej/ Harrison/ Link/ Classic or as approved by the AGE(I) of 50mm, 6 lever of special type brass with new nut and bolts including two steel keys Godrej pattern complete all as specified and shown in drg and directed

M&L for adjustment of the existing shelves by providing new clamps where they are missing to the almirah medium steel/locker steel with necessry painting complete all as specified and directed at site

Taking out old unserviceable butt hinges of almirah medium steel/locker steel and S&F new MS butt hinges of stainless steel 65 to 75 mm long all as specified and shown in drawing.

Taking out old unserviceable /rusted legs of almirah med steel locker steel and S&F new legs made out of 20 guage MS sheet including welding and painting with two coat of synthetic enamel paint by using spray gun / machine over a coat of red oxide primer complete all as specified and shown in drg.

Taking out old unserviceable/rusted shelves of almirah medium steel / locker steel and S&F new shelves made out of 20 guage MS sheet with two coat of synthetic enamel paint by using spray gun / machine over a coat of red oxide primer complete all as specified and shown in drg.

Repair to dent, deshaped portion, Derusting and cleaning of rusted surfaces by sand paper including preparation of patches by applying metalic putty etc of almirah medium / locker steel and applying one coat AD silver gray/OG synthetic enamel paint of required finish by spray painting (by spray Gun) to internal and external surfaces of almirah medium / locker steel complete all as specified and directed.

Taking out u/s three way locking device mechanism from Almirah medium / locker steel & S&F new three way locking device mecanism duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drg

Taking out u/s hanging rod from Locker steel / Almirah medium steel & S&F new hanging rod 20 mm dia stainless steel chrominium plated conduit pipe of wall thickness 1.25 mm complete all as specified and shown in drg.

Taking out unserviceable sockets from locker steel and S&F new MS sockets complete all as specified and as shown in Drg

TABLE OFFICE OFFICER / TABLE OFFICE CLERK STEEL (FD-84, FD-1003, FD-1004, FD-1005, FD-1006, FD-1002, FD-84(M), DB-5123 & DB-5119

Taking out of unserviceable locks of drawer/cabinet box of table office officers/table clerk steel and S&F new locks of 40mm six lever of special type brass ( Make Godrej/Harrison/Link or as approved by the AGE(I) with new nuts bolts and keys complete all as per drawing and as directed at site.

Cutting out old unserviceable square conduit pipe of table frame and S&F new square conduit pipe 25mmx25mmx1.50mm thick including welding and duly painted as per drg complete as shown in drawing and directed by Engineer-in-Charge.

Taking out old unserviceable top of table from office officer steel and S&F new table top of size 1370 x 760 mm made of 18 mm thick prelaminated particle board on both faces (one side teak veneered face and other side white colour) exterior grade, bonded with phenol fomeldehyde resin fixed with 4mm teak wood beading around the table top including polish to beading, fixed to table frame by steel screws complete all as specified and shown on Drg and directed.

All as per item No.3.03 above but table office clerk steel but size 1200 x 600 mm complete all as specified and as shown on drg

All as per item No.3.03 above but table office clerk steel but size 1200 x 900 mm complete all as specified and as shown on drg

Derusting/cleaning make good deshaped portion of table officer steel and applying one coats of silver gray/green hammer tone synthetic enamel paint of required shade/colour by spray painting to internal/extenal surfaces of table office officer, all as specified and shown on drg.

All as per item No.3.06 above but table office clerk steel complete all as specified and as shown on drg

M&L for preparation of dent/dismantled /deshaped portion of steel cabinet of Table Office Officer/Clerk/Typiest steel drawers before applying painting complete all as specified and directed at site.

Taking out unserviceable hard rubber PVC cap from drawer of Table Office Officer/Clerk and S&F new PVC cap of size 150 x 50 mm and depth not less then 30 mm complete all as specified and directed

Taking out unserviceable steel drawer from Table Office Officer/Clerk steel and S&F new MS sheet drawer including painting with two coat of sythetic enamel paint over a coat of red oxide primer complete all as specified and shown in drawing and directed by Engr-in-Charge

FORM WITH AND WITHOUT BACK (FD-1027, FD-78(M) / FD-77(M)

Derusting/cleaning of iron part form with and w/o back and applying one coats of black/green synthetic enamel paint of required shade/colour by spray painting , complete all as specified and directed at site.

Taking out old unserviceable nut and bolt for form with and w/o back and S&F new nut and bolt of required size for the form with and without back complete all as specified and shown in drg.

Taking out old unserviceable seat and S&F new seat made out 2nd class hard wood plank of size 1800mmx235mmx25mm fixing with round head nut & bolt 75mmx6mm to the MS frame of form wiith and without back including two coat of french polishing to wooden seat complet all as specified and directed.

Taking out old unserviceable back rest and S&F new back rest made out 2nd class hard wood of size 1800mmx150mmx18mm fixing with round head nut & bolt 75mmx6mm to the MS frame of form wiith back rest including two coat of french polishing to wooden back seat complet all as specified and directed.

Cutting of worn out/broken leg of form with and without back and S&F new square round MS Pipe 1.6mm thick of required size and fixing with gas welding including necessary painting with two coat of black / green sythnetic enamel paint by using spray gun / machine over a coat of red oxide primer complete all as specified and directed.

TUCK WELDING

M&L welding to broken joint of form with and without back complete all as specified and directed.

TABLE DINNING (FD-165M, FD-1007)

Preparation of surface by derusting/cleaning and applying one coat of synthetic enamel black paint of required shade/colour by spray painting over table dining steel parts complete all as specified and directed.

Taking down old unserviceable top of table dining OR. S&F new top size 1830 x 590 mm made out of 18 mm thick particle board with 22 guage aluminum sheet of same size on top, fixed with screws on top of 25 x 25mm square pipe frame as shown in drg complete all as specified and directed.

Cutting out old unserviceable square conduit pipe of table frame and S&F new MS square conduit pipe 25mmx25mmx1.50mm thick including two coat of synthetic eamel paint over a coat of red oxide primer as shown in drawing and directed by Engineer-in-Charge.

CHAIR VARANDAH (FD-256/259/359/FD-19(M), FD/MAP-II/15

Recaning of chair varandah with plastic cane 4 mm wide (white made out of virgin quality) including taking out all unsv cane from the chair and apply one coat of synthatic enamal paint in white colour on steel surface complete all as per shown on drawing and directed at site.

Taking out of old unserviceable PVC shoe of chair Verandah and S & F new PVC shoe of chair Verandah. PVC toes should be of best quality all as shown in drawing and directed.

Repairs to broken mild steel components of chair verandah with gas welding comlete all as specified and directed all as specified and directed. (Note :- Complete one chair made functional and measured as one unit)

Removing old broken leg of chair verandah and providing new leg with 20mm dia MS pipe 1.6mm thick cimplete with welding complete all as specified and directed .

Removing old broken PVC seat & Back of each chair verandah and S&F new PVC Seat and back 4mm thick as specified and directed (Note :- Seat & back will be measured as one unit).

TABLE 900 X 600 X 760 MM WITH DRAWER / TABLE 900 X 600 X 760 MM W/O DRAWER / TABLE 900 X 900 X 760 MM STEEL (FD-1005/1008/1009/1007)

M&L for preparing old painted steel surfaces of Table 900x600x760mm with and without drawer and applying one coat of synthetic enamel green paint on steel surfaces with spray gun complete all as specified and directed at site.

M&L for preparing old painted steel surfaces of Table 900 x 900 x 760 steel and applying one coat of synthetic enamel green paint on surfaces with spray gun complete all as specified and directed.

Cutting out old unserviceable square conduit pipe of table frame and S&F new MS square conduit pipe 25mmx25mmx1.50mm thick including applying two coats synthetic enamel paint over a coat of red oxide primer with spray gun complete as shown in drawing and directed by Engineer-in-Charge.

Taking out old unserviceable top of table 900X600X760 mm with and without drawer and S&F new table top of size 900X600x760mm made of 18 mm thick prelaminated particle board on both faces (one side teak veneered face and other side white colour) exterior grade bonded with phenol formeldehyde resin, with 4mm thick teak wood beading around the table top including polish to beading and fine finish, fixed to table frame by steel screws complete all as shown on Drg and directed.

Taking out old unserviceable top of table 900X900X760 mm and S&F new table top of size 900X900x760mm made of 18 mm thick prelaminated particle board on both faces (one side veneered teak face and other side white colour) exterior grade bonded with phenal formeldehyde resin, with 4mm thick teak wood beading around the table top including polish and fine finish, fixed to table frame by steel screws complete all as shown on Drg and directed

DESK STEEL (FD-1021, FD-48)

M&L for preparing old painted steel surfaces of Desk and applying with one coat of synthetic enamel paint on surfaces with spray gun painting complete all as specified and directed.

Taking out unserviceable Top/Bottom from box of Desk steel and S&F of new Top / bottom of Size 1210 x 530 mm made out of pre laminated particle board 18 mm thick exterior grade complete all as specified and shown in drawing.

Taking out unserviceable side from box of Desk steel and S&F new side of Size 530 x 195 made out of pre laminated particle board exterior grade 18 mm thick complete all as specified and shown in drawing.

Taking out unserviceable Back from box of Desk steel and S&F of new Back of Size 1210 x 195 made out of pre laminated particle board 12 mm thick exterior grade complete all as specified and shown in drawing.

PVC HARD RUBBER SHOE / TOE (TP)

Taking out unserviceable rubber shoe from table steel and S&F new rubber shoe to the bottom of legs of table / desk steel in shape complete all as specified and directed at site.

CHAIR STEEL TUBULAR WITH AND WITHOUT ARM (FD-75(M)

Opening out old unsv bottom seat and S&F new seat suitable for steel tubular chair of size as per drg made of seasoned 1st class hard wood teak wood duly caned with half round 2mm plastic cane of best quality Godrej pattern (Make Shah/premier/Garware) and duly painted with black synthetic enamel paint one coat to achieve good finish after preparing well smooth surface of frame complete all as specified and directed.

Preparation of surface by cleaning, derusting of stain/dirt with sand paper, making the surface smooth, filling the holes with putty wherewhere required to chair steel with arm and apply one coats of synthetic enamel paint green before fixing of seat and back of chair steel with arm complete all as specified and directed..

All as per item No.11.01 above but back of chair steel tubular complete all as shown on drg and directed at site.

M&L for S&F of broken MS leaf making one hole of reqd shape and size rest of seat and back of chair steel tubular/chair of size 50 x 25 x 3mm all as specified and directed

Opening out unsv wooden handle / hand rest of chair steel tubular with arm and S&F new handle made out of seasoned 1st class hard wood teak wood and painted with two coats of black synthetic enamel paint over a coat of primer to achieve good finish after preparing well smooth surface all as specified and directed.

All as per item No. 11.02 above but chair steel without arm complete all as shown on drg and as directed at site.

Removing old u/s PVC inside circular cap from chair steel and S&F new circular PVC cap all as per drg and directed at site.

CHARPOY GI PIPE / CHARPOY GI PIPE WITH PLY TOP / CHARPOY GI PIPE WITH PLY TOP / CHARPOY TUBULAR (FD-220)

Removing of unserviceable each long rail having both threaded ends broken and S&F new long rail of GI tubing 32mm bore medium grade (Make : Jindal/TATA/Prakash) duly threaded both ends complete all as per drg and as directed at site.

Removing of old unserviceable short rail having both threaded ends broken and fixing of two Nos short rails made from cutting of long rail obtained from item No 12.01 above threading the both ends of short rails and fixing in position complete all as per drg specified and directed at site.

Removing of unserviceable legs, threading and fixing legs made from cutting of short rails obtained from item No 12.02 above and fixing in position complete all as per drg specified and directed at site.

Removing of existing cracked deshaped or unserviceable elbow and S&F new 32mm bore GI elbow (ISI mark) three way complete all as per drg specified and directed at site.

Removing of existing cracked deshaped or unserviceable check nut and S&F new 32mm bore GI check nut (thickness of check nut shall not be less than 6mm) ISI marked all as specified and directed.

Removing of old unserviceable ply top from Charpoy GI Pipe, tightening of loose all components (ie complete charpoy), S&F commercial ply wood of size 1980 x 900 x 12mm thick BWP grade ISI marked with mild steel galvanised iron nuts, bolts washer of 6mm dia and suitable size long complete all as specified and directed.

Removing old broken/damaged welded supports MS Flat from charpoy GI Pipe 32mm. S&F new stiffeners made of MS flat size 40 mm x 06mm x 850mm long and welded to long rail horizontally at equal distance including hole where ever required suitable for fixing ply wood and painting steel surfaces with two coat of black enamel paint over a coat of primer complete all as specified and as directed by Engr-in-charge

Taking out old unserviceable cotton/nylone newar from Charpoy GI pipe and supply and fixing new 12 mm thick commercial ply wood of size 1980 x 900mm BWP grade ISI marked with 6mm x 35mm nut & bolt of flat iron stiffeners 03 Nos of size 40 mm x 06mm x 850mm long and welded to long rail horizontally at equal distance including hole where ever required suitable for fixing ply wood and painting steel surfaces with two coat of black enamel paint over a coat of primer complete all as specified and as directed by Engr-in-charge

Removing of existing broken, deshaped/dismental/missing or unserviceable iron clamp and S&F new iron clamp both side open 3mm thick with two coat of synthetic enamel paint over a coat of primer complete all as specified and shown in drg.

All as per item No 12.09 above but one side closed complete all as per drg and as directed at site.

Removing of existing cracked and unserviceable bottom wooden toe from leg of charpoy and S&F new bottom wooden toe of 32 dia at leg of charpoy making hole as and where required tightening of wooden ring with two Nos of screw complete all as specifed and directed.

BED HARD STEEL (FD/E6/MAP/08(R)

M&L removal of unserviceable ply wood form bed hard and S&F new ply wood 12mm thick BWR grade, ISI marked including fixing with suitable size screw & cup washer complete all as shown on drg and specified.

M&L for tightening of loose components of bed hard including welding where ever required on joints, replacement of old nuts & bolts where ever required and touching up on welded points with synthetic enamel paint of same colour/shade complete all as shown on Drg & specified and directed

M&L for removal of prelamainted particle board from headrest of bed hard and S&F new 18mm thick prelamainted particle boared exterior grade melamine faced veneered both side decorated (ISI Marked) with 4mm thick teak wood beading of sutable size including fixing in position with screws & washer complete all as specified and shown in drg.

M&L for removal of prelamainted particle boared foot rest of bed hard and S&F new 18mm thick prelamainted particle boared exterior grade melamine faced veneered both side decorated (ISI Marked) with 4mm thick teak wood beading of suitable size including fixing in position with screws & washer complete all as specified and shown in drg.

CHARPOY IP FOLDING [FD-388(R) ]

Removing of old unserviceable charpoy top and S&F new top of 8-9mm thick commerical plywood BWR grade (ISI Marked) with appropriate size and nut bolts & washer including tightening the losse components complete all as specified and shown in drg.

Removing of old unserviceable members of charpoy folding and S&F new members of 25mm dia 2mm thick MS Conduct fixed with gas welding complete all as specified and shown in drg.

M&L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drg and directed .

CHARPOY IP HARD TOP (FD/MAP-II/01)

Removing of old unserviceable ply wood from charpoy and S&F new 12mm thick commerical plywood BWR grade(ISI Marked) to the top of charpoy IP of appropriate size including fixing to charpoy using nuts, bolts and washer complete all as shown on drg.

M&L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drg and directed at site.

JAISWAL ENTERPRISES

M/S SRI JAGDAMBE TRADERS

M/s R.K.Jain

M/S JAI BALAJI TRADERS