SPL REPAIR OF BLDG NO LA 90 HA 64 MT STORE GA 23 GA 56 AND PROVN OF LIGHTING CONDUCTOR FOR VEH SHED AND CERTAIN REVENUE WORKS AT BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD

Amount

Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering .

Dismantling timber scantling 40 Sqcm and over in section any position as in framed works.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description all as specified

M&Lfor brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&Lfor brick work with fly ash bricks, half brick thick built in cement mortar 1:4 complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work.

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.

M&L for 20 mm thick rendering on concrete or other than fair face of brick surfaces in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only incl. finishing the surface even and fair(WPC shall be measured and paid seperately)

Supply only water proofing compound (integral) complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250 quality A) including preparation of surface and one shop coat of zinc chromate primer paint at contractors workshop before fabrication complete all as specified.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 W Gde-E 250 Quality A complete all as specified.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified

S&F mild steel screw bolt, 5 to 10mm dia machine made with hexagonal head at one end and screwed the other, or screwed both end; each screwed end to be fitted with washer and one hexagonal or square exceeding 05cm and not exceeding 10cm long.

S&F mild steel work (miscellaneous) as in wind ties for roof, flat iron fillets (for securing wire mesh etc) including drilling holes for securing bolts and fixed with bolts and nuts etc and similar work conforming to Fe-290.Gde-E-165, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.

M&L for 20 mm thick screed bed or bedding layers for laying floor tiles etc in cement mortar 1:6 complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:3 on other than fair face of brick work for laying tiles in vertical surfaces complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick, coloured (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed. .

M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed

M&L for complete removal of existing treatment on wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. .

Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling all as specified and as directed.

S&F hangers 6mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified.

M&L 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work in ceiling complete all as specifed and dierected.

Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specifed and dierected.

M&L for preparation of new primed steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specifed and dierected.

M&L for preparing new steel and iron surfaces of any description n.exc 10 cm in width or girth and apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer.

M&L RCC 1:2:4 , type B1, 20mm graded stone aggregate as in lintels upto 1.5m clear span and lintel band, roof band and other similar items including form work all as specified.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire annealed, not less than 0.9mm dia or securing with clips all as specified.

All as per Item No 34 above but 6 mm to 8 mm dia

All as per item No.34 herein before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundation and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches exceeding 1.5 mtr and n. exc 3.0 mtr depth for fixing of poles of various size and getting out in soft / loose soil all as specified and as directed .

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

M&L for P.C.C. 1:2:4 Type B-1 (20mm graded stone aggregate) for coping of poles / platform of feeder pillar box or any other indicated work including form work duly plastered and making the surface smooth and even by using extra cement complete all as directed by Engr-in-Charge

M&L for RCC 1:2:4 type B-1(20mm graded stone aggregate) as in foundations including rafts, footings, bases of columns below GL and mass concrete all as specified.

M&L for RCC 1:2:4 type B-1 (20mm graded stone aggregate) as in RCC columns all as specified.

Formwork to sides of concrete foundations, footings bases of columns below GL and similar work, rough finished surfaces of concrete all as specified.

Formwork to sides of pillars,columns etc rough finished concrete surfaces all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified

Preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified and directed

S&F mild steel framed work as in doors, gates of angles or other section with gusset plates, rails, braces etc. complete drilling for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete conforming to Fe 290 (Gde-E-165). (Including preparation of surface and one shop coat of zinc chromate primer paint) at contractors workshop before fabrication complete all as specified.

M&L cement concrete 1:2:4 type B-2 (40 mm graded stone aggregate) as in foundations, filling and mass concrete using as in wheel track anchorage complete all as specified and directed.

Returning filling of soil in trenches including spreading, levelling, watering and well ramming in layers n.exc. 25 cm complete all as specified and as directed.

Removal of excavated soil n.exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point all as specified and as directed.

Supply and lay sand with approved fine grade around cable in cushioning for protection of under ground cable complete all as specified and as directed (punned thickness shall be measured).

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed

M&L for Hardcore (broken stone or boulders) of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified

M&L for 75mm thick PCC 1:3:6 Type C2 using 40mm graded stone aggregates as in pavings, finished even and smooth without using extra cement

M&L for forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified.

M&L for Glass dividing strips, 3 mm thick and 38 mm width of strip inserted in position conform to design complete all as specified and directed

M&L for Continuous brick edging; with width equal to the depth of the brick, laid dry, on edge with fly ash modular bricks complete all as specified.

Excavating in Post holes (or similar holes) each n exc 0.50 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in soft/loose soil, complete all as specified and as directed.

S&F Steelwork in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161 - 1979 Grade St - 240 (Including preparation of surface and one shop coat of zinc chromate primer paint) at contractors workshop before fabrication.

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 25 mm thick Cement concrete 1:2:4 Type B1 (using 20mm graded stone aggregates) as in sub-base to flooring etc complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat for fixing wall tiles/ stone complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregates) for DPC to horizontal or vertical surfaces including necessary form work incl mixing WPC as per manufacturers instructions complete all as specified and as directed

M&L for shingle filling in floor or paving, laid in layers n.exc 15cm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified.

M&L for 75 mm thick Cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregates) as in sub-base to flooring etc complete all as specified and as directed

M&L RCC 1:2:4 , type B1, 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar articles set in CM 1:6 incl of necessary formwork complete all as specified and directed.

M&Lprecast RCC 1:2:4 , type B1, 20mm graded aggregate as in slabs of shelves etc and similar articles set in CM 1:6 incl of necessary formwork complete all as specified.

M&L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc 200mm thick (Horizontal or sloping) rough finished surfaces complete all as specified and as directed

M&L Use and waste of form work for rough finished surfaces to edges concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete, wall floors and roofs n exc 20cm wide in sides of RCC/PCC bands in walls horizontal or sloping and similar works etc complete all as specified and as directed

M&L for rendering 5mm thick on fair faces of ceiling surfaces in CM 1:3 finished even and smooth w/o using extra cement complete all as specified

Preparation of new plaster surfaces and applying three coats of white wash on ceiling complete all as specified and directed

Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified.

Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .

S&F pressed steel frames (Size-105X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete all as specified .

M&L for PCC 1:3:6 Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in 100mm bore pipes complete all as specified and directed.

S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.

S&F factory made 2nd class hard wood rail and style, 35mm thick, plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified.

S&F mild steel tower bolts stove enamelled black, with bright bolt 200 mm long complete all as specified.

S&F 300 mm long mild steel sliding door bolts, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate & two on staple plate complete all as specified.

S&F mild steel pressed handles oval type, stove enamelled black 150 mm long. complete all as specified.

S&F 150mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 100mm Long Stainless Steel Butt Hinges, fixed to PVC door frame and shutter, complete all as specified and as directed

S&F 150mm long Extruded aluminium alloy handles, fabricated type., anodised complete all as specified.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including painting with one shop coat for zinc chromate primer complete all as specified and directed.

All as per item No.91 above, but without glazing bars.

S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified.

S&F 3mm thick glass sheet ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified & directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified.

M&L rendering 10mm thick in CM 1: 4 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified.

M&L for glazed ceramic coloured tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified.

M&L for preparation of new untreated wood and wood base material of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for 7 to 8mm thick non skid cermic tiles of area exc 0.11 sqm but n exc 0.18 sqm each as in Skirtings complete all as specified and directed.

S&F in repairs white vitreous china wash basin flat back size 550 x 400mm including cast iron brackets, CP waste coupling 32 mm size ,cutting for and pinning in ends of brackets complete all as specified.

Taking down 15 mm bore GI pipe line and connections including fittings and removal to store or cleaning for reuse, complete all as specified and as directed

Taking down 20 mm bore GI pipe line and connections including fittings and removal to store or cleaning for reuse, complete all as specified and as directed

S&F PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) complete all as specified.

S&F 15mm bore Bib taps fancy type chromium plated, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs two way bib cock with wall flange chromium plated with crutch or butterfly handle screwed down screwed for iron pipe 15 mm bore and fixed complete all as specified and as directed.

S&F 15mm bore stop valves fancy type cast copper alloy, chromium plated, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union and fixed including taking down of old unserviceable complete all as specified.

All as per item No 108 above but fancy type, chromium plated with long shank and cup (concealed type)

S&F PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it's complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc.

S&F in repairs (EWC) Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl all fittings complete and fixing to flush pipe and outlet pipe complete all as specified and as directed.

M&L for Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.

S&F in repairs 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.5 meter long tube with CP wall bracket complete all as specified and as directed.

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.

S&F in repairs 15 mm bore Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipe and fixed.

S&F low density 32mm dia bore polythene waste pipe (LDPE) of pressure rating 0.6 Kgf/Cm2 complete all as specified.

S&F 15mm bore steel water tubes medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified.

S&F 20mm bore steel water tubes medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F PVC (SWR) bends any radius 110mm bore.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm bore.

S&F PVC (SWR) bends any radius 75mm bore.

S&F PVC (SWR), junction single, (Single T) equal or unequal 100mm bore.

M&L for Preparation of existing treatment on walls and applying one coat of oil based distemper complete all as specified and as directed

S&F 200mm Long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 100mm long Extruded aluminium alloy handles, fabricated type., anodised complete all as specified.

M&L 25mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in levelling coarse complete all as specified.

Preparation of old treated surfaces and applying one coat of white wash on wall complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinal to plug with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F Waste coupling of PTMT half or full threaded suitable for urinals (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F gun metal gate / globe valves 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed

S&F grating round 100 mm size of PTMT. (Minimum weight 50gms) all as specified.

M&L for 100mm thick cement concrete 1:4:8 type C-2 (using 40mm graded stone aggregate) as in path / hardstanding complete all as specified.

Sand filling under floors or in foundation including watering and consolidation.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4 in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, boundarys ( for stone walling) corbwls, beackets, etc. ( of any section indicated) with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 4 complete all as specified

Providing precast cement concrete 1:2:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 4 complete all as specified

M&L for RCC M25 (Nominal mix) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L rendering 20mm thick on stone or other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth without extra cement complete all as specified

S&F 110mm bore PVC vent cowl .

M&L 150mm internal dia of salt glazed stone ware drain pipes class A laid in trenches and jointed complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed .

S&F 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood all as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples.

Dismantling 100mm bore cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out from trenches complete all as specifid and directecd

M&L for laying of sub class 'B' common burnt clay brick for protection of cable complete all as specified and as directed.

Supply and lay in trenches or passing through pipe 1100 volts grade armoured heavy duty XLPE insulated electric cable with aluminium conductor of cross sectional area 6 sqmm 2 core complete all as specified and as directed.

Suply and fixing decorative LED top post lantern, 30 watt capacity, for 360 degree indirect light, IP 65 connection, resistant to impact and corrotion, glare free and better uniformity complete in and including mounting pipe complete all as specified and directed.

Supply and fix thermoplastic polycarbonate street light juntion box suitable for connection of cable , cable size range 10-25 Sqmm size 155X210X92mm which is totally safe, shock proof, impact resistant, weather proof, dust proof, rust proof ,halogen and slica free, having internal embedded gasket technology made of PUR, complete with IP 66degree of protection with cable glands M-25-2 Nos material polymide in and including the following :- Junction box with 5 way Hensel terminal arrangement and 3 Hensel terminal block and fixing arrangement of one MCB 6 Amp) and having metric knock out on 4 sides ) - 01 Nos,cable gland -03 Nos, Lock nut - 03 Nos, MCB SP, 6 Amps - 01 Nos complete all as specified and directed. Make:- Hansel or equivalant in sintax Industries limited/ C&S.

S & F GI pipe 25 mm bore light grade fixed for cable protection along with wall as specified and directed

M&L for boring upto 50 mm bore for passing the cable complete all as specified and directed

Supply & install test point terminal maide out of GI strips 32 mm x 6 mm x 30 cm with GI Nuts & bolts mounted on busbar insulators (2Nos) fixed on wall test point terminal block all as directed.

M&L for air termination, single pointed aluminium rod 12 mm dia and 300 mm long air termination rod all as specified and as directed

M&L aluminium strip 25x3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground almunium strip all as specified and as directed

M&L for porceiline insulator suitable for fixing earthing strip to the wall / floor etc all as specified and as directed

S&F for Galvanised iron strip 32x6 mm buried in ground for interconnection of earthing

M&L for earthing GI plate electrode 600x600x6 mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to aluminium strip of 25mm x 3 mm earth lead by means of bolts & nuts,check nuts & washers made of copper, earth strip protected by and including GI Pipe 40mm bore (light grade) and connected to main test point as directed and including concrete pit using PCC (1:3:6) type C-1,precast RCC (1:1.5:3) type A-1 cover slab of size 40x40x5 cm reinforced with 8mm dia TMT bars @ 100mm C/C both ways with one handle for lifting, made out of 8mm dia MS bar embeded in precast cover slab, funnel with wire mesh, 20mm bore galvanised or steel pipe (light grade) for watering in including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No. 3 of SSR Part-I earthing

M&L for PCC 1:3:6 for fixing of air termination Rod at Roof with necessary nuts bolts all as specified and directed

S&F steel tubes ,light grade, galvanised 40mm bore for passing strip with all connecting nut, washer and clamps etc complete all as specified and diredted

Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed

M&L Point wiring for light/fan/call bell etc. controlled by one switch with 1.50 Sqmm (nominal area) FRLS PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable drawn through and unsheathed single core solid copper conductor cable of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, including rigid PVC concealed conduit (Medium Grade) of suitable size, with all fittings and accessories including provision of mild steel terminal boxes of suitable size made with 1.22 mm thick mild steel sheet duly galvanised and suitable for fixing switches / sockets / regulators etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for one light / fan point controlled by one switch all as specified and directed.

All as per item No. 165 here-in-before but for 5/6 Amp socket point on independent board -ditto-

All as per item No.165 here-in-before but with 4.0 Sqmm cable for 15/16 Amp socket point on independent board and 4.0 sqmm solid copper cable for earth continuity conductor.

S&F Switch piano flush type, single pole, one way, 5/6Amp complete all as specified and as directed.

S&F Switch Socket combination, 2-in-1, 3 pin, 5/6 Amps flush type complete all as specified and as directed.

S&F Switch Socket combination, 5-in-1, 5/16 Amps flush type complete all as specified and as directed.

S&F Ceiling rose, surface bakelite, 3 terminals complete all as specified and as directed.

S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts complete all as specified and as directed.

S&Fmaster LED tube 1200mm, 18w retrofit type with one mounting rail heavy quality complete with side holders complete all as specified.

S&F SPN MCB of capacity 32 Amps, 240 volts, C curve, 10KA, complete all as specified and as directed.

S&F SPN MCB of capacity 40-63 Amps, 240 volts, complete all as specified and as directed.

Supply and fixing Green line smart luminaire of 40 watt LED street light luminaires with highly efficient lighting in & including mounting bracket made out of GI pipe light grade 32-40mm bore not less than 01 mtr long duly fixed with wall with fixing arrangement such as clamps, nuts, bolts complete all as specified and directed by the Engr in charge.

S&F MCB, SP,240 volts, C curve, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.

Taking down old serviceable/unserviceable ceiling fan, connecting wire etc and keeping at site for reuse at site after carrying out repiar works to building/rewiring complete all as specified and directed by the Engr-in-charge

Supply and fixing energy efficient, 5 star rated ceiling fan 1200 mm sweep, with all acceesories and connecting up with the ceiling rose with new flexible wire of suitable size complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe light grade for watering pipe, 15mm bore GI light grade earth lead protection pipe, 50mm thick R.C.C. 1:2;4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, including salt & charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,12 Ways, Double Door, suitable for mounting DP MCB as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, and fixed in recess in brick masonary wall all as specified and as directed

S&F ventilating fan plastic body 250 mm sweep, with louvers all as specified and as directed.

Supply and fixing wall mount fan 300 mm sweep with all acceesories and connecting up with new flexible wire of suitable size complete all as specified and as directed.

S&F Sheet Metal enclosure( IP-43) for SPN DBs,08Ways, double Door, suitable for mounting DP MCB as incomer & SP MCBs as outgoings, built- in bus bars complete suitable for 240 Volts, AC, 50 Hz supply, including taking down old

M&L for submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm and one single core PVC insulated, unsheathed solid copper conductor 6.0 Sqmm green in colour as earth lead in and including casing caping (medium grade) with all fitting & accessories incl taking down old unserviceable aluminium sub-main wiring complete all as specified and directed by Eng-in-Charge.

Dismantling & taking down aluminium service wire of any size including necessary disconnection from the pole / main switches etc. all as directed complete

Dismantling house service bracket any type from the wall including making good the disturbed surface complete

Supply and fixing LED street light fittings with and including lamp (minimum 72W rating), separate individual peanut plated Lens housing should be made of LM6 Pressure die Cast Aluminum . Optical cover should be only Toughened Glass only, Impact Resistance >IK05, IP Protection not less than IP 66, Protection should be Class I vibration should be as per IEC 60598, Product Standard IS 10322/IEC 60598, Driver Operating Voltage should be 140 V-270V, Driver Frequency 50Hz, Power Factor>0.9, Lumen output should not be less than 100 Lumen/watt and Luminaries driver ckt should be moulded type weather proof construction with separate surge protection device 5kA rating and separate connector block for termination of incoming cable connection including taking down old U/S HPSV/T5 street light from existing pole all as specified and directed. Note : (i) Being a highly humid area the driver of LED fitting shall be moulded type weatherproof type. Separate SPD to be provided for each fitting of same make. (ii) The moulded driver of LED light fitting should be of same make of light fittings. (iii) Earth connection of each light fittings should be connected to system earth point either with 3 core cooper cable or separate earth cable.

Supply & fixing of weather proof pvc insulated copper conductor cable 1.5 sqmm 3 core duly inserting the cable inside the pole including making hole on top and bottom of the steel pole all as directed .

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of F.I. 50 x 6mm with MS bolts, nuts and washer fixed to steel tubular pole duly painted with two coats of aluminium paint complete including taking down u/s bracket all as specified

Supply and fixing steel tubular swaged poles type 410 SP-22 (8.5 meter long) complete with CI base plate and finial taper plug, bolts, nuts & screws as specified.

S&F 20 mm dia Rigid non-metallic PVC conduit (medium grade) fixed with FI clamps, nuts and bolts of suitable size with nuts & bolts for protection of connecting wires, connection from junction box to light fittings, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B1 as in floor finishes complete all as specified and as directed

M/S S.B. CONSTRUCTION

NARESH GUPTA

RAJIV DEY SARKER

M/S Bikash Saha

SRI SURAJIT SENGUPTA

M/S JANARDAN SHARMA AND SONS

AJOY PAUL