138WE/L-139/2024-25

Amount

Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises complete all as directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets complete all as directed by Engr-in-charge.

Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton as in framed work complete all as directed by Engr-in-charge.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed .

Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Material & Labour for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

Ditto all as item Ser No 12 above but on ceiling complete all as specified and as directed

Material & Labour for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

Material & Labour for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

Dismantling boarding / wooden flooring of any description ,fixed in any positon not otherwise spcefically described, complete all as specifeid and directed

Material & Labour for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets ,over 6 micron polythylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified by manufacture all as specified and directed.

Material & Labour for 75 mm PCC 1:2:4 type B-2 using 40mm graded aggregate as plinth protection finished even and smooth with out using extra cement

Material & Labour for Forming Contraction (Dummy) joints 55 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection

Material & Labour for pre cast solid block masonry in cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate set in CM 1:6 complete all as specified and directed.

Material & Labour for 15 mm thick rendering on other than fair faces of brick wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

Material & Labour for 15 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

Supply and fix 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

Supply and fix mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

Supply and fix for 35mm thick 2nd class hard wood plain framed factory made glazed and skeletion window shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as directed by Engr-in-charge.

Supply and fix for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

Material & Labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

Material & Labour for sheet glass 4 mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed by the Engr-in-Charge.

Supply and fix 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Supply and fix 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Supply and fix in repair aluminium (Die cast) body door closer hydraulically operated designation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg all as specified and directed

Supply and fix floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

Supply and fix 75mm long aluminium anodized, butt hinges of extruded section C-21 complete all as specified and as directed.

Supply and fix 100mm long aluminium anodized, butt hinges of extruded section B-21 complete all as specified and as directed.

Supply and fix in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

Material & Labour for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge.

Material & Labour Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:6 set and Jointed in neat cement slurry and pointed in colour cement to match, complete all as specified and as directed.

Material & Labour Glazed ceramic coloured tiles in vertical surfaces 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:3) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge.

Dismantling water tank exc 250 & n exc 500 litre and removing to storel all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, all as specified.

Supply and fix 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe complete all as specified and as directed

Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store complete all as specified and as directed

Supply and fix 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)

Material & Labour for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes laid in trenches and jointed complete all as specified and as directed

Material & Labour for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes fixed with wall and jointed complete all as specified and as directed

S/F 110 mm dia (SWR) bend any redius complete all as specified and as directed

Material & Labour for Cast iron Nahani trap 75mm in repair with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed

Material & Labour for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes laid in trenches and jointed complete all as specified and as directed

Material & Labour for PCC 1:4:8 type D-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe including dismentling complete all as specified and as directed.

S/F in repairs 15mm dia bib tap, cast copper alloywith crutch or butterfly handle chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S/F in repairs 15mm dia Angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete all as specified and as directed

Supply only PVC connections 15 mm size with PTMT nuts (length 600mm) complete all as specified and as directed

Supply and fix in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed

Supply only 15mm bore dia pillar tap cast copper alloy fancy type high pressure screwed for iron pipe and fixed in repair complete all as specified and as directed

Supply only 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins complete all as specified and as directed

Supply and fix MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

Supply and fix Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed

Supply and fix Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as complete all as specified and as directed.

Material & Labour for preperation of newly plastered wall surfaces of any description and applying three coats of white wash complete all as specified and as directed.

Material & Labour for preperation of old plastered wall surface of any description and applying two coats of white wash complete all as specified and as directed.

Material & Labour for preperation of new steel surface any description over 10 cm in width or girth and applying two coats of synthetic enamal paint over a coat or red oxide zine all as specified and as directed complete all as specified and as directed.

Material & Labour Preparing newly plastered surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint on surfaces of walls.

Supply and fix in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

Supply and fix in repairs Soap dish Chromium plated complete all as specified and as directed.

Supply and fix in repairs Towel rail 600mm long Chromium plated (Minimum weight 190 gms).

Supply and fix in repairs Towel Hanger with 6 Nos of pin and 600mm long chromium plated etc complete fitted all as specified and directed by Engr-in-charge

Dismantling of CI/PVC pipe any type and size etc as per specified and directed by Engr-in-charge.

Material & Labour for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed.

Material & Labour for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments laid over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and as directed

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

Taking down care fully sub main wiring/service wire of any description.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the following:-

One light/exhaust fan point controlled by one way switch

One switch socket outlet 6 Amps, 230 volts point on same board

One switch socket outlet 6 Amps, 230 volts point on independent board

All as item No 78 above, but using cables 4 Sq mm size for one switch socket combination 16 Amps

Supply and replacement of lamp holder insulated body with back plate.

Supply and fix of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply and fix of switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as directed.

Supply and fix of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed.

Supply and fix of Ceiling rose, surface Bakelite three terminals complete all as directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix of MCB SPN 63 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge. Cat No : DHMGCSNF040 Havells or equivalent of Indo Asian/Standard Havells

Supply and fix of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as directed. Cat No : DHMGCSPF006-032 Havells or equivalent of Indo Asian/Standard Havells

Material & Labour for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire complete all as specified

Supply and fix in replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make-Havells /crompton/ Bajaj

Supply and fix in replacement LED luminaire 600mm x 600 mm, 35/36 watt,220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.Make-Havells/ Philips/crompton/ Bajaj

Supply and fix in replacement of connecting and testing LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete with IP65/66 protection complete.

Material & Labour for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 3 of SSR Part-I complete all as specified and directed by Engr-in-charge.

Supply and fix in repairs, Air Circulator fan, steel body AC single Phase 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and directed by Engr-in-charge.

M/S Praveen Kumar and Sons (BID ID -3255044)

M/S Stanzin Tharchin (BID ID -3254088)