Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.6 LAccepted-AOC RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Found Lowest | |
| 2 | L2₹59.3 L+₹1.6 L (2.72%)Rejected-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110 075 | NEW DELHI | NEW DELHI | DELHI | 110075 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹61.9 L+₹4.2 L (7.29%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹64.2 L+₹6.4 L (11.1%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹68.2 L+₹10.5 L (18.2%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹91.3 L
EMD Value
₹1.6 L
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DELHI CANTT
HQ CWE DELHI CANTT 110010
ADDN ALTN AND IMPROVEMENT TO SEWAGE LINE AND PROVN OF SEPTIC TANK SOAKAGE WELL IN 1 WEC PROVN OF SEPTIC TANK FOR BLDG NO N1 AND N2 AT 1 WEC MD ACCN LINE AND PROVN OF GUARD ROOM WITH REST ROOM ALONGWITH TOILET AND BATHROOM FACILITY FOR SECURITY TROOPS
2024_MES_641984_1
CWE/D-28/2023-24
Open Tender
Coal Works
Item Rate
180 days
DELHI CANTT
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE CENTRAL DELHI CANTT
₹1.6 L
Yes
24 Apr 2024
12 Feb 2024
12 Mar 2024
12 Feb 2024
11 Mar 2024
4 Mar 2024
Amount
Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out all as specified.
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. n exc 10 sqm on plan and getting out all as specified.
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and exc 1.5 m but n exc 3.00 m in depth for foundation etc. 10 sqm on plan and getting out all as specified.
Excavating over areas, in soft/loose soil n exc 1.5 m deep and getting out in depth for foundation etc. and getting out all as specified.
Excavating over areas, in soft/loose soil exc 1.5 m but n exc 3.0 m deep and getting out in depth for foundation etc. and getting out all as specified.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation and mass concrete complete all as specified.
M & L for Reinforced cement concrete M-25 design mix (using 20mm graded crushed aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc all as specified.
M & L for Reinforced cement concrete M-25 design mix (using 20mm graded crushed aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like all as specified.
M & L for Reinforced cement concrete M-25 design mix (using 20mm graded crushed aggregate) for columns, pillars, piers, post and strut all as specified.
M & L for Reinforced cement concrete M-25 design mix (using 20mm graded crushed aggregate) for beams, cantilivers, beressummers, lintels over 1.5m span all as specified.
M & L for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface all as specified.
M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surface all as specified.
M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantiliver shelves etc. for rough finished flat surfaces of concrete all as specified.
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. for rough finished flat surfaces of concrete surface all as specified.
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm etc. for rough finished surfaces of concrete all as specified.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified
- ditto- as ser item no 16 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 all as specified.
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified.
M&L for 40 mm thick DPC on horizontal or vertical surfces in PCC 1:2:4 type B0 using 12.5mm graded stone agg incl all necessary form work and mixing of WPC (WPC shall be measured and shall paid seperately)
M & L for hardcore of gauge n exc.63 mm(using broken stone or boulders) deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified
M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.
M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:6 complete all as specified and as directed
M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.
Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement. It should be laid in alternate bays, each bay n.exc 3m length with joint to be filled with bituminous mastic filling comprising a mixture of Part of heated hot blown bitumen 85/25 penetration and two parts of heated sand all as specifed and directed.
M & L for Taking down cement plaster in brick walls, including raking out joints,hacking for key,scrubbing down with water etc including scaffolding if required complete all as specified.
M & L for applying two coats of cement base paint over one coat of primer on newly plastered surfaces(external) of walls including preparation of new surfaces complete all as specified and directed by Engineer-in-charge.
M& L for rendering 10 mm thick in CM 1 : 6 on other than fair faces of brick work or concrete surfaces etc finished even and fair without using extra cement all as specified.
M&L for rendering 15 mm thick in CM 1:4 on any faces of concrete or brick surfaces finished even and fair without using extra cement complete all as specified.
M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished even and fair without using extra cement all as specified.
S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing cement all as specified.
M & L Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing cement all as specified.
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section.
S & F 150 mm long extruded aluminum alloy handles fabricated type and anodised
S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as spd.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane all as spd.
S & F cast iron soil, waste and vent pipes( sand cast pipes) 100 mm bore in any length with or without ears, with cement joint laid in trenches or in floors all as specified
S & F bends 100 mm size dimnishing pieces or tapers (larger bore measured) all as specified
S & F branch pieces 100 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified
S & F 75mm dia cast iron soil waste and vent pipe (ISI marked) sand cast, in any length with or without ears with cement joint complete fixed in floors or walls and in any other places, complete all as specified.
S & F cast iron floor trap including jointing to waste pipe in run lead, dia of outlet 75mm, complete all as specified.
M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.
M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.
S & F vitreous china white glazed european type WC with white ISI marked plastic seat cover and flush pipe complete all as specified.
S&F PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc complete incl S&F 2 Nos CI brackets, waste pipe and coupling complete all as specified.
S & F pvc connection 15mm dia of standard pattern 600 mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.
S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .
S&F of brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified.
S&F in 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.
S & F brass CP angle valve 15 mm dia including connecting to PVC/CP connection complete all as specified.
S & F concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup, complete all as specified.
S&F rotational moulded polyethylene water storage tank tripple layered (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I, 1000 Ltr capacity complete all as specified.
S&F 20 mm ball valve PTMT high pressure with polythene float and flynut complete screwed for iron pipe.all as specified
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed
M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.
M & L for two coat of distemper oil emulsion over a coat of primer and one coat of wall care putty including preparation of new plastered surface of wall complete all as specified and directed.
M&L for prepration of newly plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emulsion paint of DULUX Weather shield Max or APEX ULTIMA from Asian paint over one coat of primer complete all as specified and directed by Engineer-in-charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.
S & F as pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete, as specified, supplied and fixed complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood glazed and skelton shutters (two panels) open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) including one shop coat of pink primer complete all as specified and directed.
M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.
Supply and fix 300 mm long mild steel sliding door bolt, bolt type stove enameled black with bright bolt not less than 12 mm dia with an including a minimum of six bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified
S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm, complete all as specified.
S & F butt hinges medium weight stainless steel 100mm size complete all as specified (Make - Plaza/Classic/Ashish).
M & L for water proof treatment to RCC roof slab incorporating CONPLAST WL (water proofing compound) in the proportion as directed by the manufacturer and apply on damp pcc surface first coat of brush bond RFX and again apply second coat of brush RFX after drying of first coat (average 1 mm thickness) and on completion 25 mm thick pcc 1:2:4 mix (4 parts of 10 mm normal coarse aggregates, 2 parts of fine aggregate and one part of cement) cement concrete screed and finsih the top surface. Complete roof shall be tested by ponding of water for 24 hrs. Note :- Brush bond RFX liquid powder and CONPLAST WL shall be of FOSROC or equivalent in pidilite
S& F steel window including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60mm,double revated with side hung shutters both glazed and gauged incl box type hinges,steel handles and peg stay,tower bolts complete with glaze/gauge bars devotailed or welded incl one shop coat of red oxide primer (Wire gauge and glass panes shall be measured seperately) incl M & L for providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; ladders; framed balusters; walk ways; railings; framework of water tanks, roof truss and similar work con- forming to Fe.290.Gde-E-165
M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .
M&L for joint less Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 10mm thick rendering of backing coat in CM 1:4 etc complete all as specified .
M & L for pre treating the bottom and sides of excavation prior to construction with anti termite treatment at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed
M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed
S&F CP Brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified.
S&F Fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified.
S&F 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed, complete all as specified
S&F Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.
S&F Vitreous China Urinal, Half stall type, white (including necessary assoceries ) Vitreous China urinals, bowl type (back or corner wall type), with urinal spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement. complete all as specified and directed.
M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, complete all as specified.
M&L for 25mm thick Sand filling under floors or in foundation including watering and consolidation. Note :- 1. thickness may vary as per requirement. 2. Punned thickness will be measured.
Supply and laying DWCPE (SN8) 150mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in trenches to a level on cocrete bed complete all as specified and directed by Engineer-in-charge.
Supply and laying DWCPE (SN8) 200mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in trenches to a level on cocrete bed complete all as specified and directed by Engineer-in-charge.
M&L for 150mm sail-glazed stoneware drain pipes laid in trenches and jointed mplete all as specified and as directed. .
M&L for 200mm sail-glazed stoneware drain pipes laid in trenches and jointed mplete all as specified and as directed. .
M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl beding, packing under and haunching against the sides for 200mm internal dia of pipes, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).
Material and labour for medium duty precast machine pressed manhole cover slab 80 mm thick of PCC 1:1.5:3 type B-1 and 10mm TMT bars ,including flat iron 80mmx3mm all around the slab including grove and hook arrangement for lifting and placing in position , size of slab as required at site and complete all as specified and directed.
M & L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping complete all as specified
Cleaning of GTs of any size and shape taking out sludge and depositingcomplete all as specified and as directed.
Cleaning of Manholes of any size and shape taking out sludge and depositingcomplete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels all as specified
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
S&F Chequered cement concrete tiles with PU coating grey cement and pigment 20cm X20cm X25mm thick set jointed and pointed in neat cement slurry in floors all as specified and directed.
M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge.
M&L for providing 75 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in hard standing Complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.
M & L reinforcement cement concrete 1:1.5:3 nominal mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and this like all as specified.
Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.
S/F of PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.
S/F of PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete.
S&F of PVC (SWR) bends any radius, 110 mm bore complete.
S&F of PVC (SWR) bends any radius, 75 mm bore complete.
S & F of 50 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed
S&F of 100 mm bore cast iron bends complete all as specified and as directed.
S&F of repair 75 mm bore cast iron bends complete all as specified and as directed.
Construction of 20 users Septic tank to carry sewage and sludge water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 of Chief Engineer Chandigarh Zone and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
Construction of 50 users Septic tank to carry sewage and sludge water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 of Chief Engineer Chandigarh Zone and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
Construction of 100 users Septic tank to carry sewage and sludge water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 of Chief Engineer Chandigarh Zone and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
Construction of 150 users Septic tank to carry sewage and sludge water, complete all as specified and shown in Drg No. STD 1320 (C) Sheet 1/3 to 3/3 of Chief Engineer Chandigarh Zone and directed. Note:- (a) Excavation and earth work shall be in any type of soil. (b) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
Construction of Soakage well 1.80 m dia and 3.0 m effective depth complete all as specified and shown in Drg No. STD 1173 (C) Sheet 1R/2 of Chief Engineer Chandigarh Zone and as directed. NOTE:- (a) Excavation and earth work shall be in any type of soil. (b) foundation in PCC 1:3:6 type C2 using 40 mm graded stone aggregate. (c) Honey combing brick walls masonry as shown in drawing. (d) RCC work where ever shown in drawings shall be M-25 Design Mix, type B1 using 20 mm graded stone aggregate (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
Construction of Soakage well 3.30 m dia and 3.0 m effective depth complete all as specified and shown in Drg No. STD 1173 (C) Sheet 1R/2 of Chief Engineer Chandigarh Zone and as directed. NOTE:- (a) Excavation and earth work shall be in any type of soil. (b) foundation in PCC 1:3:6 type C2 using 40 mm graded stone aggregate. (c) Honey combing brick walls masonry as shown in drawing. (d) RCC work where ever shown in drawings shall be M-25 Design Mix, type B1 using 20 mm graded stone aggregate (e) The cost of all above provisions and other provisions as shown in drawings shall be deemed to be included in quoted rates of this item and nothing extra shall be entertained on this account.
M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including non metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :
One light/fan/bell point controlled by one by one way switch.
-ditto- as above item No 116.01 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.
-ditto- as above item No116.02 but Same board.
One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.
M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified.
M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified.
M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified.
M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.
M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.
S & F electronic fan regulator 5 step ISI marked connecting complete all as specified.
Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
M&L MCB SPN 40 Amp "B" curve
M&L MCB SP 6 to 32 Amp "B" curve.
Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.
Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.
Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.
S&f fresh air fan PVC body AC single phase 230/240 V of size 300 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.
Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed . Note: Bldc fan must be operated on regulator.
S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.
S & F water heater storage type Geyser vertical type with suitable size of fastner and including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having adjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2 KW and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed .
Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete
Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 10 Sqmm 4 core.
Supply and fix GI Pipe 32 mm dia light grade, for laying in road crossing/ fixing of vertically complete all as directed
Removing excavateed material to a distance not. Exc 50 m and deposting where directed at a level not. Exc 0.6 m above the starting point all as directed
Supply and laying sub clas 'B' Bricks of old size ( 23 x 11 x 7 cm) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer -in-Charge
M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed
The new hut furnitures
M/S MSD & Associate
M/S SURINDERAS CONSTRUCTION CO.
S GOURAV PRAKASH ENTERPRISES
M/S ANIL KUMAR
imran construction company
M/S Rohit Enterprises
J S CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .