Widening/ strengthening and upgradation of road from Rangas to Bagchal via Mehre Barsar road km 0/00 to 91/220.

Earth work in excavation for foundation of bridge structures like abutment in all type of classification of soil comprising ordinary rock, hard rock, chiseling/wedging out of rocks (where blasting in prohibited) as per drawing and MORTH technical specifications clause 304 and as per direction of the Engineer-In-Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto all leads and lifts including dressing of side bottom and pumping, bailing out water (surface and sub-soil water) upto all depth any quantum of water including cleaning of slush which may arise out during dewatering. Any loss to the public/private property during the course of excavation shall be the absolute responsibility of the contractor which shall have to be duly compansated by him in all case as per the direction of Engineer - in Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Depth upto 3.00 metre (Three metre)

Depth upto 3.00 to 6.00 metre (Three to six metre)

Depth above 6.00 metre (six metre)

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1:3:6 (One cement : three sand : six graded crushed stone aggregate) 20mm (twenty millimetres) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work for plain concrete in abutments foundation for all type of structures complete as per drawing and technical MORTH specification clause 1500,1700 and 2100 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying plain/reinforced cement concrete in foundation of bridge complete as per drawing and technical MORTH specification clause 1500,1700 and 2200 design mix to obtain minimum compresiv strength of Grade M-30 (M-Thirty)ith minimum content cement 420 kg per cubic metre(four hundred twenty kilogramme per cubic mere) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying fitting and placing HYSD bar TATA/SAIL reinforcement in foundation in all heights and depth including cost of binding wire and cost for cutting binding, bending and placing in position of bars complete as per drawing and technical MORTH specifications clause 1600 and 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying plain/reinforced cement concrete in sub-structure of bridge complete as per drawing and technical specification clause 1500, 1700 and 2200 design mix with minimum content cement 420 kg per cum (four hundred twenty kilo gramme per cubic metre) to obtain minimum compresiv strength of Grade M-30 (M-Thirty ) using concrete mixer as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying fitting and placing HYSD bar TATA/SAIL reinforcement in sub-structure in all heights and depth including cost of binding wire and cost for cutting binding, bending and placing in position of bars complete as per drawing and technical MORTH specifications clause 1600 and 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying of filter media with granular material/stone crushed aggregate satisfying the requirements laid down in of MORTH specifications clause 2504.2.2 to a thickness of not less than 600mm ( six hundred milimetre ) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Back filling behind abutment , wing walls and return walls complete as per drawings & MORTH technical specification Clause 710.1.4 of I.R.C. 78 and 2200 granular material as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing weep holes in brick/stone masonry/plain/reinforced concrete abutment , wing walls, return walls, retaining walls with 100mm (One hundred millimetre) dia AC pipe extending through the full width of the structures with slopes of I(V):20(H) (one vertical : twenty horizontal) towards drawing face complete as per drawing and MoRTH technical specification clause 2706 & 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying fitting and fixing in position true to line and level (POT-PTFE) bearing consisting of a metal piston supported by a disc or un-reinforced elastomer confined within a metal cylinder, sealing rings, dust seals PTFE surface sliding against stainless steel mating surface complete assembly to be of cast steel/ fabricated in structural steel, metal and elastomer elements to be as per IRC-83-part-I & II respectively and other parts conforming to BS: 5400 section 9.1 and 9.2 and clause 2006 of MORTH technical specifications clause 2000 and 2700 complete as per drawing and technical specifications including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Furnishing and placing Reinforced/Prestressed cement concrete in super-structure as per drawing and MORTH technical Specification clause 1500, 1600 and 1700. Using batches plant RCC grade M-45 (M-Forty five) design mix with minimumm cement content @ 450kg per cum(four hundred fifty per cubic metre) transit mixture dump upto all heights including cost of form work and curing complete as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Supplying fitting and placing HYSD bar reinforcement in super-structure in all heights including cost of binding wire and cost for cutting binding, bending and placing in position of bars complete as per drawing and technical MORTH specifications clause 1600 and 2200 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying reinforcement concrete mechanically mixed and vibrated with minimum cement concrete @ 275 kg per cum (two hundred seventy five kilogramme per cubic metre) of design mixed minimum compressive strength of grade M-15 ( M-fifteen ) with grade levelling course below approach slab as per drawing and MoRT&H technical specifications Clause 1000,1500,1700 and 2700 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying mechanically mixed and vibrated reinforced Cement Concrete with minimum cement concrete @ 420 kg per cum (four hundred twenty kilogramme per cubic metre) design mix to obtain minimum compressive strength of grade M-30(M- thirty) including cost of form work, reinforcement and curing complete in approach slab as per drawing and MORTH technical specification clause 1000, 1500, 1700 & 2704 as per the direction of Engineer-in –charge. including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and fixing drainage spouts complete as per drawing and technical MORTH specifications clause 2705 with 6 metre(six metre) long galvanised iron 100 mm (one hundred millimetre) dia drainage galvanised iron light grade pipe for bridge as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and installing single strip seal expansion joint Catering to maximum horinzontal movement upto 40mm (forty millimetre) complete as per approved drawing and specification to be installed by the manufacuturer/supplier or there authorised representative insuring compiance to the manufactures instructions for installation as per Drawings, MoRT&H Specifications Clause 2606 and , MoRT&H circular no. RW/NH-35049/1/96-S&R dated 30th November 2000 and 20th February 2001, IRC: SP: 69-2005 'Guidelines & Specifications for Expansion Joints' including entire carriage of material with in all leads and lifts as per direction of Engineer-in-Charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying 75mm (Seventy five millimetre) cement concrete wearing coat with minimum cement content @ 420 kg per cum (four hundred twenty per cubic metre) M-30 grade (M-Thirty) including reinforcement complete as per drawing and MORTH Technical Specifications clause 2702 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Reinforced cement concrete crash barrier at edges of the road, approaches to bridge structures and medians constructed with M-40(M-forty) grade with minimum cement concrete 430kg/cum(four hundred thirty kilogramme per cubic metre) SYSD reinforcement confirming to IRC:21 and dowel bars 25mm dia(twenty five millimetre dia) or 450mm(four hundred fifty millimetre) long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimension in the approved drawing and at locations director by the Engineer , all as specified and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying of hot applied Thermoplastic compound 2.5mm (two point five millimeter) thick including reflectorising glass beads @250gms(two point five zero gram) per sqm area, with road marking materials with 20%(twenty percent ) glass beads having reflective index of 1.5(one point five millimeter) and 75%(seventy five percent) spherical and indigenous or foreign plant having sufficient strength to withstand heavy load without deformation and having softening point 25 to 30 degree(twenty five to thirty degree) more than the climate temperature of the area in a width of 0.10X0.25 (zero point ten into zero point twenty five metre) strips in specified colour as per directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. as per directions of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Excavation in hilly area in all heights and depths in all kind of soil by manual/ mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rocks chiseling/ wedging out of rock(where blasting is prohibited )and their intermediate classification of soil, complete including setting out true to the required line , grades width cutting and trimming of side slopes and level as shown on the drawing and as directed by the Engineer-in- Charge at site according to the M.O.R.D technical specification clause 300, 1602 and 763 and sorting out useful material and stacking the same in all leads and lifts in acquired width of the road and transportation of un useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material to approved dumping sites by Engineer-in- Charge through all modes of transportation including head load or animal transport or mechanical means along with its levelling fine dressing and carriage of machineries , materials , tools ,equipment and safety measures and incidentals necessary including to complete the work by mechnical means/ labour if required and nothing extra shall be paid on this account. All useful material such as stone shingles, aggregate and states etcetra shall be sorted out and staked in proper stacks. The carriage of excavated earth and nothing shall be paid on this account. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Construction of embankment and shoulders with approved material obtained from borrow pits roadway cutting and excavation of drain and foundation of other structure grade and comacting to meet requirement of table 300.1 and 300.2 as per MORD technical specifications clause 301.5 direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub-grade and earthen shoulder with approved material obtained materiai from borrow pits within all leads and lifts, transporting to sight, spreading, grading to required slope and compacted to meet requirement of table No. 300.2 as per MORD technical specifications clause 300.1 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil . ordinary rock, hard rock, chiseling/ wedging out of rock (where blasting is prohibited ) as per drawings and M.O.R.D technical specification clause 300 & 1600 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Construction of granular sub-base /base by providing well graded material, mixing in a mechanical mix plant at OMC, carriage of mix material to site of work, spreading in uniform layers with motor grader on prepared surface and compacting with three wheel 80-100 kN ( eighty to hundred kilo newton ) static roller capacity to achieve the desired density complete as per specifications clause 401 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads, heights, lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) ( fifty three millimetres to zero point zero seven five millimetres ) to wet mix macadam specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne ( eight to ten tonne) capacity to achieve the desired density, complete as per MORD technical specifications clause 406 and directions of Engineer-in-Charge.as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts nd other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and applying evenly a priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.85 kg/sqm (Zero point eighty five per square metre) using mechanical means as per MORD technical Specifications clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25( zero point two five) kilogram per square metre on the prepared bituminous surface cleaned with hydraulic broom as per MORD technical specifications clause 503 as per the direction of Engineer-in- Charge. including entire carriage of material in all leads and lifts. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying bituminous macadam 50mm (fifty millimetre) with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder @ 3.30%(three point thirty percent), transported to site laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MORD technical Specification Clause 504. Including all leads, lifts and carriage of materials complete as per entire satisfaction of the Engineer in charge. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and laying 30mm(thirty millimetre) thick bituminous concrete with 100-120 TPH(one hundred to one hundred twenty tonne per hour) batch type hot mix plant producing an average out put of 75 (Seventy five) Tonne per hour using crushed aggregates of specified grading-II premixed with bituminous binder and filler of specified material VG-30 (viscosity grade-thirty ) at the rate of 5.5percent (five point five percent) minimum by weight of mix and filler, 2 percent (two percent) transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specifications Clause 507 complete within all respect. as per the direction of Engineer-in- Charge. including entire carriage of material in all leads and lifts. The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.

Providing and fixing cat eye make)(3M) of size 100x20mm made of heavy duty body shall be molded dual shank ASA /Acyclic styrene acyloretrite ) or HP/High impact polystyrene) ort ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The reflective panels on both side with at least 12cm. of each area side. The luminance intensity should be as per the specification ASTM as recommended in BS-8873 part 4 1973 as per approved sample and manufacture by the Engineer-in-charge .including carriage of materail within all leads and lifts .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing delineators road way indicators, hazard markers, object, markers 80-100cm (eighty to one hundred centimeters) high above ground level painted black and white in 15cm (fifteen centimetre) wide stripes, fitted with 80x100mm(eighty to one hundred millimeters) rectangular or 75mm(seventy five millimeters) dia circular reflectorised panels at the top, buried or pressed into the ground and confirming to IRC-79 and the drawing including carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octrol, royality,Malkana, toll tax, or other taxes, but excluding GST imposed by Government.