REPAIRS/REPLACEMENT OF JOINERY, FLOORING AND OTHER B/R NATURE WORKS AT VIMAN NAGAR UNDER AGE B/R-II OF GE (AF) LOHEGAON AT AF STN PUNE.

Amount

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1 Sqm complete all as specified and directed.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down shutter of any description n exc 1 sq. m each complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F 200 mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long, aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S F stainless steel Butt hinges, 100 mm long mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 300 mm long aluminium anodised sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

M & L for 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed.

M & L for Providing, cement concrete type B0, 1:3:6 (12.5 mm graded aggregate)for chawkat filling as required all as specified and directed by engineer in charge.

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 2nd class hard wood lipping all round of shutter: supplied and fitted to chowkats complete all as specified and directed .

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M/L for 18 MM thick Block boards, grade 2 quality, i n t e r i o r grade, commercial type,vennered with both faces fixed with screws to timber and nails for storage almirah to the sizeand as directed by Engr-in-charge.

M&L for Plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area n exc 3 Sqcm etc complete all as specified and directed

S & F continuous (piano ) hinges 30mm width flaps ,mild steel ,bright finish or electrogalvanised all as specified and directed.

S &F of 125mm Almunium Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F Powder coated aluminium frame for doors,windows,window tracks, ventilators with one or more rebates and sliding window tracks including joining cleat for fixing etc. complete all as specified

S&F almunium powder coated louvers concealed type for ventilltor size 0.60 X0.45 having arrangement of 4/6 blades fixed to almunium frame complete all as specified and directed .

S&F powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beadingscrews etc. complete all as specified complete all as specified and directed .

S&F powder coated Anodised aluminium window (openable/sliding type) and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Door closer hydraulically regulated, designation No. 3, Almunium extruded sectiom universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F floor door spring double cylinder suitable for door shutter upto 100 kg and fixed complete all as specified

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F 5.5 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S&F 4.00 mm thick figured glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S&F in repair 4.0 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S & F in repair Harrison rail 20 mm Dia(Curtain rod)s, of Mild steel chromium plated with fixing brackets, stops, rollers etc.all as specified and directed.

Preparation of new surfaces of wood and wood based surfaces and applying two coat of synthetic enamel paint over one coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M&L for Chimneybars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independentely in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165

M&L Preparation of new painted surfaces of steel and applying two coat of synthetic enamel paint over one coat of red oxide to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S & F in repair MS Mortice lock, vertical type, size 100 mm, long 4 levers with handles as in repairs complete all as specified and directed.

Taking down and refixing shutter after repair/ Easing of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

M&L for 10 mm thick rendering on fair faces of brick works on wall / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed ( With using WPC as per manufacturer instrction . Note:-WPC shall be measured and paid seperately.

Preparation of surface and applying two coats of hot bitumen blown 85/25 to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed.

Supply only cold Bitumen primer at 0.8 Ltr/ Sqm for use in waterproofing and damp-proofing treatments etc complete all as specified

M & L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)incl primed surface by forced application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer's instructions including taking down old roof treatment of any description complete all as specified and directed.

Supply only integral waterproofing compound.

M&L Providing, cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in padding concrete finished even and fair with out using extra cement complete all as directed by Engr-in-charge.

M & L for two coat of aluminium paint above the new untreated APP membrane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing coat), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for jointfree non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

All as per Item No 05 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed.

M&L for joint free Glazed Ceramic Coloured Tiles, 300X450X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia

S&F for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia

S&F for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

Disconnecting existing exc 250 nexc 500 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed.

S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed

S&F in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed.

S&F in repair for 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified

Dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Dismantling water tanks of any type of capacity exc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S & F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe complete all as specified and directed.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, fancy type CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.

S & F in repair angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S &F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S &F in repair 15mm dia stop valves cast copper alloy, screwed donw high pressure with crutch or butterfly handle screwed both ends for iorn pipe or for unions and fixed (concealed type) all as specified and directed.

Demolition and breaking up drain pipes Upto 150 mm (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

-do- as above but 110mm dia

M&L in repair for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.

-do- as above but 110mm dia

S &F in repair 110mm dia of PVC (SWR) branch piece, single T, equal or unequal all as specified and directed.

S &F in repair 75mm dia of PVC (SWR) branch piece, single T, equal or unequal all as specified and directed.

M&L in repair PVC (SWR) vent cowl of 110mm dia

S&F in repair pvc SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repair Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed.

S & F in repair Grating doom 100mm dia of stainless steel all as specified and directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 and is to be finished even and smooth with out using extra cement complete all as specified directed

M & L for 5mm thick cement plaster in CM 1:3 onceilingand finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

M & L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.

M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

- ditto - all as per item No. 102 above but on walls.

M & L for newly plastered surfaces Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer on wall complete all as specified and directed.

Shri Sant Cosntruction (BID ID -3500122)

M/S SHREE HARE KRISHNA INFRA (BID ID -3501254)

Parmanand Enterprises (BID ID -3507905)