Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹9.8 L+₹27,055.69 (2.85%)Rejected-Finance | L2 | Rejected-Finance BEING L2 BIDDER | |
| 3 | L3₹9.9 L+₹37,803.47 (3.98%)Rejected-Finance | L3 | Rejected-Finance BEING L3 BIDDER | |
| 4 | L4₹10.3 L+₹75,057.30 (7.89%)Rejected-Finance | L4 | Rejected-Finance BEING L4 BIDDER | |
| 5 | L5₹10.3 L+₹76,772.33 (8.07%)Rejected-Finance | L5 | Rejected-Finance BEING L5 BIDDER |
Tender Value
₹9.2 L
EMD Value
₹18,400
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I DARJEELING
AGE I DARJEELING JALAPAHAR CANT DIST - DARJEELING
COMPREHENSIVE MAINTENANCE FOR OFFRS MD ACCN AT JALAPAHAR AREA UNDER AGE I DARJEELING
2023_MES_599204_1
9033/E8
Open Tender
Civil Works
Item Rate
180 days
JALAPAHAR
AS PER NIT
7 documents required · 7 mandatory
₹500
AGE I DARJEELING
₹18,400
27 Jun 2023
29 May 2023
26 Jun 2023
29 May 2023
24 Jun 2023
12 Jun 2023
Amount
Dismantling of boarding any description fixed in any position with nails, complete all as per specified and as directed by Engineer-in-charge.
Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as per specified and as directed by Engineer-in-charge.
S&F 40mm thick 2nd class hardwood boarding in floor planed one side with butt joints and fixed with nails, complete all as per specified and as directed by Engineer-in-charge.
S&F 20mm thick 2nd class hardwood planed one side with butt joints as in shelves of cupboards,racks and pelmets, eaves board and skirting work fixed with nails, complete all as per specified and as directed by Engineer-in-charge.
M&L 15mm thick 2nd class soft wood planed one side & edges tongued and grooved or rebated with butt joints as in wall panelling and similar work fixed with nails, complete all as per specified and as directed by Engineer-in-charge.
S&F Gl frame work of size 605 x 605 mm, for seamless comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm GI hangers, complete all as per specified and as directed by Engineer-in-charge.
S&F 5 mm thick PVC insulation panels suitably placed in false ceiling grid made of Aluminium / G.I. / M.S. / wooden, complete all as per specified and as directed by Engineer-in-charge.
Dismantling timber scantling 40 Sqcm & over in section in any position as in unframed work, complete all as per specified and as directed by Engineer-in-charge.
All as per ser item No 08 above but as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm as in unframed work, complete all as per specified and as directed by Engineer-in-charge.
M&L 2nd class HW scantlings clean sawn in timber fixed work, complete all as per specified and as directed by Engineer-in-charge.
M&L preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil, complete all as per specified and as directed by Engineer-in-charge.
Dismantling floors, hearth or wall tilling including cememt mortar beding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing non-skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.18 but not exc. 0.38 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing non-skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.18 but not exc. 0.38 Sqm as in skirting/dado, laid over 10 mm thick screed bed in cement mortar 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing non-skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.11 but not exc. 0.18 Sqm as in floor set and joint in cement slurry, jointed & pointed in white or coloured cement to match the surface including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing non-skid ceramic tiles (coloured) 7 to 8mm thick, area of each tile exc. 0.11 but not exc. 0.18 Sqm as in skirting/dado, laid over 10 mm thick screed bed in cement mortar 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, complete all as per specified and as directed by Engineer-in-charge.
M&L for providing glazed ceramic coloured tiles of size 300 x 450 x 7/8 mm thick as in vetical surface set in cement slurry jointed & pointed in white or coloured cement to match, over 10 mm thick screed bed in CM 1:3, complete all as per specified and as directed by Engineer-in-charge.
M&L for 18 to 20 mm thick granite (of any type) tiles, machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigmint to match the shade of granite stone including griding & polishing, laid over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge.
Taking down / out old unserviceable GI pipe upto 15 mm bore including all fittings and fixture from floor/ wall or trenches including cleaning and stacking for refixing / reuse and removal unusable materials from site of work, complete all as per specified and as directed by Engineer-in-charge.
All as per serial item No. 19 above but for 20 mm bore of pipe.
S&F GI tube 15 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
S&F GI tube 20 mm bore medium grade with fittings and fixed complete to wall, ceiling or laid in floor complete all as specified and as directed by Engineer-in-charge.
Demolition of brick work or stone masonry built in any cement mortar, complete all as specified and as directed by Engineer-in-charge.
M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engineer-in-charge.
Taking down cement plaster of any description on brick work/stone work incl raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed by Engineer-in-charge.
M&L rendering 15 mm thick on fair faces of brickwork in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge.
M&L for 15 mm thick rendering on fair faces of brick work or one side of lathing in cement mortar (1:4), mixing with water proofing compound @ 3% by weight of cement consumed and surface finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. Note: WPC shall be measured and paid separately as supply only under relevent item.
Supply only integral water proofing compound confirming to IS complete all as per specified and as directed by Engineer-in-charge.
M&L preparation of new plastered surface of wall & applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering, complete all as specified and as directed by Engineer-in-charge.
M&L preparation of new plastered surface of wall & applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of old decorated plastered or unplastered surfaces of walls and applying one coat of wall care putty (1 mm thick) for preparation of surfaces for distempering and applying two coat of distemper oil emulsion over a coat of chalk whiting of any tint as approved, complete all as specified and as directed by Engineer-in-charge.
M&L for applying two coat of white wash on ceiling including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.
M&L for complete removal of existing treatement on plastered or unplastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spots and applying two coat of distemper oil emulsion over one coat chalk whitening, complete all as specified and as directed by Engineer-in-charge.
M&L for applying one coat of distemper oil emulsion on ceiling including preparation of surfaces, complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old decorated wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and as directed by Engineer-in-charge.
All as per serial item No. 35 above but over steel surfaces.
M&L for preparation of new or previously untreated wood or wood based surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-in-charge.
M&L for five coats of melamine polishing to new or existing wooden surfaces including preparation of surfaces and complete removal of existing treatment as per manufacture's instructions, complete all as specified and as directed by Engineer-in-charge.
S&F in repair stainless steel kitchen plate rack 0.85mm thick of size 31" X 30" X 10" complete all as per specified and as directed by Engineer-in-charge.
S&F in repair cromimum plated health faucet shower with CP flexible pipe up 15 mm bore with 1 m long Easy Flex tube in chrome finish with wall hook, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair angle stop valves/cock, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs of 15mm bore fancy type Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F in repairs pillar taps, 15mm dia cast copper Alloy with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair CP toilet paper roll holder with flap including all necessary fittings, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair brass CP Soap dish and fixed to plugs with chromium plated brass screws complete all as per specified and as directed by Engineer-in-charge.
S&F in repair stainless steel kitchen sink 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe having minimum overall size 495 X 420mm & bowl size 410X330X160mm complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15 mm bore PVC connection pipe 450mm long complete all as per specified and as directed by Engineer-in-charge.
S&F in repair Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as per specified and as directed by Engineer-in-charge.
S&F in repair glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard & railing 60 cm long, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair 15 mm bore CP basin mixer for mixing hot & cold water with capstin head screwed down high pressure with or with out littered 'H' or 'C' with long screwed shank and fly nuts screwed down for iron pipe, complete all as per specified and as directed by Engineer-in-charge.
S&F in repair PTMT cabinet mirror of size 400 X 500mm with screws and all necessary fittings fixed on walls, complete all as per specified and as directed by Engineer-in-charge.
Demolition of unreinforced cement concrete in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge.
M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as per specified and as directed by Engineer-in-charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
RAI CONSTRUCTION
M/S TSHERING BHUTIA
SANJAY KAUSHIK
TSHERING WANGYAL BHUTIA
HIRA SINGH
KWOK YING CHIU
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .