Construction of Community Hall alongwith Furniture at Zuluk Village, Sikkim

Amount

STRUCTRUL ITEMS:- Flooring Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out Soft & disintegrated rock

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface as in Soft & disintegrated rock (PCC bed blocks in GL or below)

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft & disintegrated rock

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in Soft & disintegrated rock

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (Vertical wall of foundation)

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface ( Floor )

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (Along Perimeter of wall under Floor )

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for Cement concrete in foundations, filling and mass concrete 1:4:8 type B2 using 40mm graded stone agreegate as in bed blocks.

M&L for Cement concrete in foundations, filling and mass concrete 1:2:4 type B2 using 40mm graded stone agreegate as in bed blocks.

M & L Pre-cast cement concrete Solid Building Blocks or Slabs 10 cm thick, type C1 (1:3:6), (20 mm Graded Aggregate) (With plain interlocking joints as directed) setiing in cm (1:6) complete.

M&L for 12 mm dia TMT bars of mild stee, 10mm dia and over Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde -E-165) , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inclding cranking, bendiing spirally for hooping for columns, hooking ends and biinding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork

M&L RCC nand/Beams, cantilevers, bressummers, lintels over 1.5m span Type-I, nominal-mix grade & mix of cement concrete 1:1.5:3, 20mm Nominal size of graded coarse aggregate in mm

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, (Broken stone & Boulders) deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L for 75 mm thick Cement concrete Type D2 (1:4:8) using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.

M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick on vertical surface such as skirting/dado, incl highlighter patterns complete set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Column Column of SHS Section 100 x 100 x 4mm of 4.055 M height with necessary hole, forgings with connector plate. (connector plate paid separately)

Column of SHS Section 100 x 100 x 4mm of 3.605 M height with necessary hole, forgings with connector plate. (connector plate paid separately)

Truss Truss of SHS Section 50 x 50 x 2.9mm with necessary hole, forgings with connector plate. (connector plate paid separately)

Veranda Rafter of SHS Section 50 x 50 x 2.9mm with necessary hole, forgings with connector plate. (connector plate paid separately)

Purlin SHS 25 x 25 x 2.6mm (Secondary roof) to enclose 60mm thick PUF roof pannel with necessary hole, forgings with connector plate as per direction of Engr-in-charge.

Connector plate MS sheet 200X200X5mm thick with 4 x 14mm dia hole for 'I' Section HB.

Connector plate MS sheet 200X150X5mm thick with 4 x 14mm dia hole for 'I' Section HB.

Connector plate MS sheet 100X50X5mm thick with 14mm dia hole for MS Grid for Floor Frame Pannel and 'I' Section HB.

Nut & Bolt 10mm dia and 110mm length with 2 x washer for MS Grid for Floor Frame Pannel of MS SHS 40 x 40 x 2.6mm.

Nut & Bolt 12mm dia and 60mm length with 2 x washer for for 'I' Section HB

Nut & Bolt 12mm dia and 110mm length with 2 x washer for Column base.

Nut & Bolt 12mm dia and 240mm length with 2 x washer for ColumnTop.

50mm thick Puffed Insulated Wall Panel 50mm thick sandwiched between 0.50mm Pre painted Galvalume (PGI) sheet of Vineered Finish (internal side) & Green Colour (External side)

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each, (B) Area exceeding 2.00 sqm each (window)

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge (Door & Window frame)

Ceiling 50mm thick sandwiched between 0.50mm Pre painted Galvalume (PGI) sheet of Offwhite/White Colour

Top Roof Sheet Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Plinth Protection M&L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

S & F in repairs of anodised aluminium grill made with 6 mm bars made to shape, DG-104 including U/F/H aluminium channel/sections complete all as specified and directed (Make :- Jindal / Hindalco / Ajit India) Note :- (i) Fabrication work shall be got done from approved fabricator of manufacturer of alluminium sections. (ii) Sample of grill shall got approved by the GE in writing.

S&F 20mm dia, stainless steel, fancy type,tubular curtain rod fix on decorative brackets with decorative globe at both end complete all as specified and directed.

S&F stainless steel, fancy type Brackets decorative with fancy type globe at both end curtain rod for 20mm dia curtain rod complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.

S&F, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.

M&L rotational moulded polythylene water storage tank (sylindrical, vertical with closed top) hosted and fixed capacity of tank 500 lts sintex make incl 20mm dia PTMT ball valve complete all as specified.

S&F 25mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight -210 Gms)

S&F 20mm bore dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 25mm bore dia of gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair, vitreous china bowl urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F vitreous china wash basin, white flat back of size 550mm x400mm excluding taps but incl CI brackets, 40mm CP Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified.

Supply only pillar taps cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes 15mm bore complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws

S&F, Towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.

S&F coloured vitreous china squatting pan, 'Orissa’ pattern of size 580mm x 440mm with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china wash down closet pan (pedestal pattern) of white (excluding flushing cistern and flush pipe) but incluging trap, connection to drain pipe or outgoing pipe and to flushing pipe, antisyphonage pipe, seat and cover etc complete all as specified.

S&F PVC flushing cistern low/high level including brackets ball valve, float etc complete capacity of 10 ltrs.

S&F 40mm bore high density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, 15mm bore dia of pipe complete all as specified and directed.

S&F stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions for 15mm bore of pipe complete all as specified and directed.

S&F, Brass chromium plated shower rose 125mm size fix with or without swivel joints, any size, including fixing to steel pipe or union

S&F 600 mm long, PVC connection with PTMT nuts for 15 mm bore of pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F PVC (SWR) bends of any radius with oval and access door of 75mm dia.

S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia.

M&L for PVC (SWR) junction (single ‘T’) with access door for 75mm dia.

M&Lfor PVC (SWR) vent cowl of 110mm dia

S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete fixed all as specified.

S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 80 mm thickness ,M-40 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 25 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed.

Pre fabricated septic tank of 5000 ltrs capacity. Septic tank shall be anchored with hold Make Sintex/Patton/Polycone/ SGIPL(ISI Marked) and Prefabricated soakage pit of 500 ltr capacity. Soakge pit shall be anchored with hold fast.Make:-Sintex/Patton /Polycone/ SGIPL(ISI Marked) for 125 User complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound complete all as specified and directed.( Note :- Water proofing compound shall be measured and paid separately )

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

Supply only, integral water proofing compound.

Furniture Items Double Leaf steel lockers. Steel lockers of height 1500mm x width 900mm x depth 475mm shall be made out of 22 gauge mild steel sheet and finished with two coat of synthetic enamel White paint over one coat of red oxide primer. The locker should have two partitions two doors with shelves for Office use.

Fire extinguisher A/B/C type portable Net 2 Kg capactiy cylindrical ISI marked.

Water Dispenser 500Watt with capactity of 3.2Ltr cold water and 1 Ltr of hot water storage with empty water cans of 20Ltr Make of water dispenser

VIP Chair Make: Nilkamal / Godrej / Rajkamal / Supreme/Equivalent

Office Table Make: Nilkamal / Godrej / Supreme/DeckUp Giona/Equivalent

Plastic Arm Chair (Pear wood) Make: Nilkamal / Godrej / Rajkamal / Supreme/Equivalent

Electrical Items XLPE Insulated Copper Conductor Cable 16 sqmm Copper conductor 3 core (Armoured) Make : Polycab/ Havells /Finolex/Plaza/Anchor Confirming to IS 694-1990

XLPE Insulated Copper Conductor Cable 2.5 sqmm Copper conductor 2 core Make : Polycab/ Havells /Finolex/Plaza/Anchor Confirming to IS 694-1990

XLPE Insulated Copper Conductor Cable 6 sqmm Copper conductor 2 core Make : Polycab/ Havells /Finolex/Plaza/Anchor Confirming to IS 694-1990

Supply 5 Litre Instant Water Heater, 3000 watt, Wall mount, storage type steel body with copper inner tank and heating element, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece with hot & cold PVC connection pipe and hanging arrangements etc. Make : Bajaj/Hevels/venus/equivalent

Decorative Type ultra–Slim Linear LED, Fixture, with extruded Polycarbonate, Environmental Friendly, efficient energy Led Sapphire DL 18W 6k SQ Light fitting 18 Watt internally pre-wired including Tube Rod etc. Make: Havells/Philips/C&G/Bajaj/Panasonic

LED Security light energy saving & environmental friendly long life versatile pressure die cast aluminium IP 66 with high power LED as light soure and electronic driver of 24 W LED 6000K with security light bracket of 40 mm dia GI pipe light grade bend in 45 degree angle with all fixing arrangments (ie Clamp, nut and bolts etc) Make : Philips/Bajaj / Havells.

PVC insulated and PVC sheathed, multistranded copper conductor (Flexible) industrial cable, 1100 volts, confirming to IS : 694 three core 1.5 sqmm. Make:- Havells/Plaza/Polycab /Finolex

PVC sheathead copper FRLS cable 2.5 Sqmm single core with multistrand 1100 Volts grade in Red/Black/Green colour volts, confirming to IS: 694 Make: Plaza/ Finolex/ Havells/ Polycab

PVC sheathead copper FRLS cable 1.5 Sqmm single core with multistrand 1100 Volts grade in Red/Black/Green colour volts,confirming to IS: 694 Make: Plaza/ Finolex/ Havells/ Polycab

PVC sheathead copper FRLS cable 4.0 Sqmm single core with multistrand 1100 Volts grade in Red/Black/Green colour volts, confirming to IS: 694 Make: Plaza/ Finolex/ Havells/ Polycab

PVC Casing capping 20mm 10' long Make: Pressfit/AKG/D-Past or equivalent

PVC tee for casing casing 20mm Make: Pressfit/AKG/D-Past or equivalent

PVC elbow for casing casing 20mm Make: Pressfit/AKG/D-Past or equivalent

PVC circular jn box 2-4 way Make: Berila/Ajanta/ Plast/ Harsh/ Kinjal/Alwyn

PVC shaddle with screw Make: Berlia/Ajanta Plast/ Harsh/ Kinjal/Alwyn

PVC Square Block Make: Berlia/Ajanta Plast/Harsh/ Kinjal/Alwyn

Surface plastic box suitable for moduler switches and socket of 4 module. Make : Havells/Philips/Bajaj/C&G

Surface plastic box suitable for moduler switches and socket of 3 module. Make : Havells/Philips/Bajaj/C&G

Solid plate with base frame suitable for surface plastic box of 4 module. Make : Havells/Philips/Bajaj/C&G

Solid plate with base frame suitable for surface plastic box of 3 module. Make : Havells/ Philips/Bajaj/C&G

Switch Piano moduler type 5 Amp one way. Make : Havells/Bajaj/ Philips/Klick

Switch Piano moduler type 20 Amp one way. Make : Havells/Bajaj/ Philips/Klick

Socket 5 A modular type. Make : Havells/Bajaj/ Philips/ Klick

Plug and socket SPN enclouser with 2 pole and earth metal plug and socket with 20 Amps SP MCB. Make : Havells/Legrand/ L&T/ Siemens.

Socket multipurpose 3 pin 10 and 3 pin 20 Amp modular type of 2 module. Make : Havells/Legrand/ L&T/ Siemens.

Insulation Tape 10mtr. Make: Steel Grip/ Anchor Grip/ Plaza

Exhaust Fan, PVC Body 300mm sweep with louvers. Make : Bajaj/Khaitan/Usha/CG

Ceiling Rose 2 to 3 terminal Make : Anchor/Plaza/Kinjal

MCB DB (SPN) 12 Way 240W double door as per IS 8828. Make : Havells /L&T/Siemens/HPL.

MCB 6 AMP SP 240 volts as per IS 8828. Make : Havells /L&T/ Siemens/HPL.

MCB 16 Amp single pole as per IS 8828. Make : Havells /L&T/ Siemens/HPL.

MCB 20 Amp single pole as per IS 8828. Make : Havells /L&T/ Siemens/HPL.

MCB SPN 63 AMPs 240 volts as per IS 8828. Make : Havells /L&T/ Siemens/HPL.

Isolator 40 AMPs DP 240 volts. All as per IS 8828 – 1996. Make: Havells/ Legrand.

PVC Copper Cable 1 Sqmm Single Core with solid conductor 1100 volts grade in green colour for ear thing as per IS 694. Make : Plaza/ Finolex/ Havells/ Polycab

Lightening Conductors set complete with all accessories as per details give below:- (a) Zinc & Alloy Coated safe earthing Electrode (76.3mm dia) 2mtr long withback filled compound conductolite – 2 bags CPRI approved. (b) Air Terminal four pointed aluminum rod 12mm dia and 600mm llong fitted on GI Pipe. (c) GI Pipe med grade 06 mtr long 40mm dia. Make: Tata/Jindal/Bansal. (d) Epoxy Insulator with screw 10 Nos. (e) Copper cable 35 Sqmm multi-stranded single core. Make: Plaza/Havells/ rallison/ISI-10 R/M. (f) Tesing points terminal box made out of Gun metal or phosphorous of size 75 x75x25mm with screw. (g) Nut & bolts 2” x1/2” – 08 Nos (h) Foundation Nuts & Bolts 16mm x 400mm -4 Nos (j) FRP earthing pit with cover - 01 Nos (k) Copper lugs 35 sqmm for connection of cable with nut

Elect earthing set with following items as given below:- (a) GI Earthing plate 600x600x6mm thick with two Nos holes - 01 No. (b) GI pipe15mm dia light grade for the protection of GI wire Make TATA/ Jindal/ Prakash/ Surya" - 8 Mtrs. (c) GI pipe 20mm light grade for watering - 2 Mtr Make: TATA/ Jindal/ Prakash/ Surya (e) GI wire 4mm dia - 2 Kgs (f ) GI funnel with wire mesh suitable for 20 mm dia GI pipe - 01 No (g) Common salt - 50 Kg (h) Charcoal - 50 Kg (h) GI Earthing pit cover complete - 01 No (j) GI nut bolt with washer of size 10mm dia 25mm long - 02 Nos (k) Provn of 01 No Hollow block pit of size 45 x45x 45 CM incl plaster in CM 1:4 incl finished smooth

R S ENTERPRISES (BID ID -3382086)

AKSHAY ENTERPRISES (BID ID -3382123)