M and to WSS at Vile Bahagd Industrial Area...Providing Interior arrangement for office at WTP.--3rd Call

Providing and Fixing in position Aluminium Frame work for Partitions, paneling, boxing, soffits with vertical members at not more than 600 mm centers & horizontal members not more than 600 mm centers. Complete including necessary additional supports, bracing runner etc. complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. Size 50 x 50 x 1.62 mm

Size 50 x 25 x 1.62 mm

Providing & Fixing in position Marine plywood on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. i) 9mm thick Marine plywood

ii) 12 mm thk marine plywood

iii) 19 mm ply marine plywood

Providing & fixing in position Finishes for Partitions / Panelling. Actual executed area will be measured as two sides of same partition are likely to have different finishes. Rate of this item shall include cost of providing cross matching laminate in approved pattern etc. as per details .The finishing material shall be fixed in required divisions / panels / pattern with proper grooves etc. as per drawings & directions. Item to be completed in all respects as per drgs & instructions from EIC. i) Laminate :- Providing & Fixing Laminates of 1.5mm thickness of approved make, shade & Quality.

Providing & fixing in position 460 mm deep storage unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood for all inside surfaces 2)6 mm thk. marine ply backing panels with french polish on both sides 3) Shutters made out of 19 mm thick ply finish with material specified below from outside and one mm thick laminate for inside of shutters. 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces& be finished withmelamine polish.4) hardwares such as heavy duty hinges, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 3 coats of french polish.The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect. Full height storage with laminate finish (FST)

Low height storage with Laminate finish (LST)

Overhead storage with Laminate finish (LST)