Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹35.8 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹38.0 L+₹2.2 L (6.26%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L-2 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹99,800
Closing Date
1 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REHABILITATION OF TEMPORARY BUILDINGS INCLUDING GALVALUME SHEET AND ROOF AND PERIODICAL SERVICES TO CERTAIN BUILDINGS IN ZONE A AREA AT MIRAN SAHIB UNDER GE JAMMU
2023_MES_572948_1
GEJC-61/2022-23
Open Tender
Civil Works
Item Rate
200 days
AoR of GE Jammu
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE Jammu
₹99,800
Yes
27 Feb 2023
5 Jan 2023
3 Feb 2023
5 Jan 2023
1 Feb 2023
19 Jan 2023
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, any type including cover fillets complete all as specified and as directed.
Material and labour for providing and fixing in position suspended false ceiling system using 'E' grid suspended ceiling grid system. The size of grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick high pressure stream cured non premiered classic / designer variant E-Board ISI marked IS No 14862-2000. Fibre cement 'E' board to be placed in the gird of 'E' grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips complete all as specified and as directed.
Dismantling unframed work timber scantling 40 Sqcm and over in section in any position as in unframed work complete all as specified and as directed.
Dismantling timber scantling in fillets, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and as directed.
Demolition of brickwork / stone masonary built in cement mortar including all quoins, arches, pillars but excluding precast concrete articles complete all as specified and as directed.
Material and labour for brick work with sub class 'B' old size brick straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete and fixed all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Suppy and fixing structural steel work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or mild steel tube pipe) including distance pieces, cleats etc Fe-410W (Grade 'E'-250) quality 'A' including shop coat of primer complete all as specified and as directed.
Supply and fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.
Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate etc Fe-410W (grade 'E'-250) complete all as specified and as directed.
Dismantling AC corrugated, semi-corrugated sheets in roof covering including ridge complete all as specified and as directed.
Material and labour for Asbestos cement sheeting 6mm thick, corrugated or semi-corrugated sheets in roofs, wall etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Material and labour for Asbestos cement two piece adjustable serrated ridge 6mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for 15 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately.
Material and labour for preparation of new / old surface and applying two coats of oil bound distemper over and including a coat of wall putty 1 mm complete all as specified and as directed.
Material and labour for preparation of new / old plastered surface and applying two coats of cement based paint including one coat of alkali resistant primer surface complete all as specified and as directed.
Material and labour for preparing surface of new steel of any description over 10 cm width and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for preparing surface of old steel material of any description over 10 cm width or girth treated with one coat of synthetic enamel paint complete all as specified and as directed.
Taking up or down and Supply and fixing 15 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and water tightness test as directed by Engineer-in-Charge.
Taking up or down and Supply and fixing 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and water tightness test as directed by Engineer-in-Charge.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) (using 100% coarse sand) on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres / sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10 cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20 - 22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors / terraces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10 mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres / sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10 cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for two coats of aluminium paint on membrane surface all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
Taking down eaves, gutters and rain water pipes (any size or pattern) including supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and as directed by Engineer-in-Charge.
Taking down eaves, gutters and rain water pipes (any size or pattern) including supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair PVC (SWR) bends 110 mm radius complete all as specified and as directed.
Supply and fixing in repair 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerbs rounded or chamfered on edges complete all as specified and as directed.
Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.
Taking down chowkhats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frame) complete all as specified and as directed.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.
Supply and fixing for 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.
Supply and fixing for 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.
Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel door frames, chowkhat complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C-1 as in bed blocks for hold fast including necesssary formwork complete all as specified and as directed.
Supply and fixing for 30mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats all as specified and as directed.
Supply and fixing for 30mm thick second class hard wood glazed and skeleton shutters, open, rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing for 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
Supply and fixing for 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed to door complete all as specified and as directed.
Supply and fixing for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fixing for 150mm long extruded aluminium alloy handles, fabricated type, anodised, fixed to door complete all as specified and as directed.
Supply and fixing 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door with complete all as specified and directed.
Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour for preparation of steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and after priming with a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Supply and fix solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube supplying and fixing in opening as per specification complete all as specified and as directed.
Supply and laying factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at sie as per specification clause No 8 B.1 to 8 B.10 and drawing on Page No 174 of MES SSR-2020 Part-II complete all as specified and as directed.
Supply and fixing 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.
Supply and fixing Aluminum anodized, barrel towers bolt of extruded section and fixed of 150 mm size complete all as specified and as directed.
Supply and fixing Aluminium handle, cast type, anodised size 150 mm long complete all as specified and as directed.
Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying one coat of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.
Material and labour for preparation of old plastered surfaces and applying one coat of Oil Bound distemper on walls complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying two coats of Oil Bound distemper any color on walls complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying one coat of cement based paint up to 12 metre height complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying two coats of cement based paint up to 12 metre height complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying two coats of exterior emulsion paint any colour up to 12 metre height complete all as specified and directed colored approved by Engineer-in-Charge.
Material and labour for preparation of old plastered surfaces and applying two coats of exterior emulsion paint over 2 mm thick putty any colour up to 12 metre height complete all as specified and directed colored approved by Engineer-in-Charge.
Material and labour for preparation of old surface of wood rubbing down by sand paper, washing by water and applying one coat of synthetic enamel paint over wood surface over 10 cm width or girth complete all as specified and as directed.
Material and labour for preparation of old surface of wood rubbing down by sand paper, washing by water and applying two coats of synthetic enamel paint over wood surface over 10 cm width or girth complete all as specified and as directed.
Material and labour for preparation of old surfaces of steel over 10cm width or girth including rubbing down by sand paper, washing by water or scrapping the old coat by blowing lamp and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.
Material and labour for preparation of old surfaces of steel over 10cm width or girth including rubbing down by sand paper, washing by water or scrapping the old coat by blowing lamp and applying two coats of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and labour for rendering 10 mm thick in cement mortar (1:4) as backing for receiving tiles complete all as specified and as directed.
Material and labour for screed bed or bedding layer of mortar 15 mm thick for finishes in cement mortar (1:6) screed bed for laying floor finishes complete all as specified and as directed.
Material and labour for non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour for non-skid joint free coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour for coloured glazed ceramic coloured tiles in vertical surface 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 10mm thick in cement mortar (1:3) on fair faces of brick / concrete, chajja, fascia, ceiling, roof projection, corner joints, cornices, wall including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of white wash complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of oil bound distemper complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of cement based paint complete all as specified and directed.
Material and labour for writing letters or figure (Block Roman Itallic or Indian) 10cm high as in building numbers complete all as specified and directed.
Material and labour for preparation of surface of AC sheet or plastered any description over 10cm width or girth and applying one coat of exterior emulsion paint of any color and shade complete all as specified and directed.
Taking out old existing 15 mm bore pipe and refixing after repairing complete all as specified and as directed at site.
Taking out old existing 20 mm bore pipe and refixing after repairing complete all as specified and as directed at site.
Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 15 mm bore complete all as specified and as directed.
Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm bore complete all as specified and as directed.
Supply and fixing in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as specified and as directed.
Supply and fixing in repairs bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed including cutting walls and making good surfaces. Note: - The quoted rates shall include making good of surface as existing including tiling, color wash, distempering, plastering etc.
Supply and fixing in repairs chromium plated angular stop cock, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs chromium plated pillar taps, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs pillar mixer for wash hand basin, chromium plated, screwed down high pressure, of size 15mm dia complete all as specified and approved.
Supply and fixing in repairs bip tap standard of PTMT any colour screwed for iron pipe and fixed of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 32mm ISI marked complete all as specified and as directed.
Supply and fixing in repair waste fittings chromium plated with long screwed shanks and fly nuts of size 40mm ISI marked complete all as specified and as directed.
Supply and fixing in repair looking mirror with PVC moulded frame and hard board back white colour of size 450 x 600mm complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm bore and for 450 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 40mm bore complete all as specified and as directed.
Material and labour for cleaning of water storage tank 500 litres capacity completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost all as directed.
Material and labour for cleaning of water storage tank 1000 litres capacity completely by removing all scale dirt / dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost all as directed.
Supply and fixing in repairs PVC seat cover for EWC, white colour including chromium plated hinges complete all as specified and directed at site.
Supply and fixing in repairs chromium plated jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed.
Supply and fixing in repairs PVC valve less syphon action type low level flushing cistern 8 to 10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed. Make: - Parry ware (Slimline) / Hindustan Sanitaryware / Prayag (Cat Part No 501).
Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.
Supply and fixing in repair chromium plated towel rack of size 600mm complete all as specified and directed.
Supply and fixing in repairs chromium plated shower rose with arm and not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and directed.
Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and directed.
Supply and fixing in repair 125 mm dia steel grating with or without hole complete all as specified and directed.
Supply and fixing in repairs galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.
Supply and fixing in repair sheet glass ordinary quality and glazing with oil putty and pins in square not exceeding 0.5 Sqm in each pan of thickness 3mm complete all as specified including hacking out all as directed.
Refixing of existing window glass panes, removal of old putty and refix with oil putty and pins of any size or type of glass complete all as specified and directed.
Material and Labour for figured glass, pin head type and glazing with oil putty and pins in squares not exceeding 0.5 Sqm in each pane of thickness 3mm including hacking out complete all as specified and directed.
Supply and fixing in repairs PVC over head tank cover / lid of size suitable for capacity of above 500 litres and upto 1000 litres capacity complete all as specified and directed.
Material and labour for replacing of galvanised iron fittings medium grade ISI mark like Elbow, socket, union, socket, tee, reducer, Tank nipple, Nipple (15mm to 75mm) etc complete all as directed at site including all material and labour for following size of pipes: -
15mm bore pipe
20mm bore pipe
Supply and fixing in repair of floor door spring including taking out shutter and refixing in the same complete all as specified and as directed.
Supply and fixing in repair of hydraulic door closer including taking out shutter and refixing in the same complete all as specified and as directed.
Supply and fixing in repairs mild steel medium weight cold rolled butt hinges 100mm size complete all as specified and as directed.
Supply and fixing in repairs mild steel medium weight cold rolled butt hinges 75mm size complete all as specified and as directed.
Supply and fixing in repairs mild steel medium weight cold rolled butt hinges 50mm size complete all as specified and as directed.
Material and labour for replacing of undermentioned old unserviceable / missing iron mongery for wooden joinery complete all as directed at site: -
Aluminium anodized, barrel tower bolt of extruded section, 100mm long.
Aluminium anodized, barrel tower bolt of extruded section, 150mm long.
Aluminium anodized, barrel tower bolt of extruded section, 200mm long.
Aluminium handle, cast type, anodized, 100mm size.
Aluminium handle, cast type, anodized, 150mm size.
Aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 250mm long.
Aluminium alloy, anodized sliding door bolt with hasp, staple and fixing and sliding bolts of extruded section, 300mm long.
Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 140mm.
Supply and fixing in repair corner glass shelf of size 250 mm radius with stainless steel bracket complete all as specified and approved.
Supply and fixing in repair glass shelf of size 600mm long with stainless steel bracket complete all as specified and approved.
Supply and fixing in repair glass shelf of size 300mm radius (set of three) with stainless steel bracket complete all as specified and approved.
Supply and fixing in repair cabinet mirror plastic body for toilet of size 450 X 600mm with 4mm thick looking mirror complete all as specified and as directed.
Supply and fixing in repair 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 19 / 20 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white including edge binding of same colour in all ends and fixed with screws to steel / timber frame work including hinges as in cupboard shutters / kitchen cabinet etc color approved by Engineer-in-Charge complete all as specified and directed.
Supply and fixing in repairs drapery curtain rod of metallic 20mm dia covered with PVC coating complete with mild steel bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
Supply and fixing in repairs sinks with two no's bowl made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe, bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
Supply and fixing in repair health faucet with 1 metre long flexible pipe complete all as specified and as directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two no's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.
Supply and laying Vitreous China urinals, flat back size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
Supply and fixing in repairs stainless steel plate rack of size 75 X 75 X 25 cm made of 0.55 mm thick sheet complete all as specified and as directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
Bidder Name
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
M/S A TO Z ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .