Repair/replacement and maint of internal wiring, fitting and fixtures and certain petty repair of E/M nature work in ARN, Engr Regr, mess qtrs and guest rooms and repair/maintenance of low tension electric system and allied work at OTM accn at CME

Amount

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. credit for above items should be made as per conditions separately.

M&L for point wiring with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall to match with the existing finish etc for the following :-

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.2 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 Amps socket outlet flush type on independent board.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.4 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 Amps socket outlet flush type on independent board.

S & F switch piano, flush type, single pole one way 5 Amps complete all as specified and directed.

S & F switch piano, flush type, single pole one way 15 Amps complete all as specified and directed.

S & F bell push flush type single pole one way 5 Amps complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed.

S & F socket outlet 5 in 1, 5 pin, 15 Amps flush type complete all as specified and directed.

S & F switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.

S & F ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S & F in replacement Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed.

S&F switch modular, one way 6 Amps, 1 module with suitable plate and cover complete all as specified and directed.

S&F switch modular one way 16 Amps, 1 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F modular bell push 6 Amps 1 module with suitable plate and cover complete as per existing make and model complete all as specified and directed.

S&F White cover plate with frame 2 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 3 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 4 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 6 module complete as per existing make and model all as specified and directed.

S&F White cover plate with frame 8 module complete as per existing make and model all as specified and directed.

S&F Decorative ultra slim with aluminum housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten(LED tube light fitting complete 20W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make: Shakti cat part No SZSLBMX020 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F Decorative ultra slim with aluminum housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting. Make : Shakti cat part No SZSLBMX010 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F new generation energy saving LED Bulk Head fitting 10 Watt made up of Poly carbonate housing with diffuser incl taking down old UNSV fitting. Make : Shakti cat part No SZSBHMX010 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F LED building security light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable size bracket incl taking down old UNSV one. Make : Shakti cat part No SZPSLMM025 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F decorative wall light fittings (bracket light), CITY 3 made up of polycarbonate suitable for 10 watt LED lamp incl LED lamp incl taking down old UNSV one. Make- Havells cat No LHDL06160099 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement LED panel 2 feet x 2 feet size 36 wattt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed. Make : Shakti cat part No SZRELMX025 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Photon Ultra LED Tubelight (Single Side Connection) LED Rod 20 watt Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. Make- Havells cat No. PHOTONULTRAE 2.01213T8SSTL20WLED865SPC or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement Octane LED Panel Round Slim 18 watt, compact, auminium die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. Make- Havells cat No.LHEBFCP6IZ1W018 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement Octane LED Panel Round Slim 6watt, compact, auminium die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. Make- Havells cat No LHEBHDP7IZ1W006 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F in replacement RUBY (Clear) - IP65 New generation, post-top 35 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Make- Havells cat No RUBYPT35WLED830PSYMTOPC or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

Supply and fixing Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light 30 watt with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations. (Note - The contractor is responsible to arrange suitable height of ladder for replacement of fitting) Make: Havells cat part No JETAQUANTOPLUSFLP30WLED757SYMLENS or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/C & S/ Bentec India Ltd./ Luker.

S&F energy saving, environment friendly & robust IP65 protected LED midbay with PDC housing suitable for ceiling (Surface/Suspended) mount. Make- Havells cat No ILIOSBAYPLUSHBP80WLED857SP90DTOPC or equivalent of Philips/Bajaj/shakti. Note : Contractor will resposible to arrange ladder/trolly mounted vehicle for mounting of light at the height of 20 to 25 ft without any extra cost.

M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

All as per item No.39 above, but size 6 Sqmm Four runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.39 above, but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.39 above, but size 4 Sqmm Four runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.39 above, but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

Supply and fixing PVC cable ducts 75 x 45 mm with all accessories for fixing of sub main wiring drawn through cable duct along wall complete all as specified and directed.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old UNSV one.

S&F in replacement triple pole and neutral enclosure with a three pin and earth plug and socket complete with one TPN MCB 32 amps, 240 volt incl taking down old UNSV one.

S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one. .

M & L in replacement MCB distribution board double door 415 volt, TPN 4-way, incl taking down old unserviceable

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one.

S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one.

S&F load line vertical TPN distribution board 4 way including 1 incommer MCCB of 125 Amps 4 pole double door IP-43 protection, powder coated, IK08 with provision of suitable size bus bar and cable management kit complete all as specified and directed.

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 40 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB SPN 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 63 Amps, 415 V, AC incl taking down old unserviceable one complete all as specified and directed.

S & F in replacement MCB TPN 100 Amps, 415 V, AC incl taking down old unserviceable one complete all as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular complete all as specified and directed.

All as per item No.56 above, but 6 Sqmm size complete all as specified and directed.

All as per item No.56 above, but 4 Sqmm size complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 100 x 100 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 175 x 100 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 200 x 150 x 50mm complete all as specified and directed.

M&L in replacement of PVC rectangular boards closed recessed of size 250 x 200 x 50mm complete all as specified and directed.

M&L in replacement of LED lamp 9 watt complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good surface for laying /removing of cable all as specified and directed by Engr in charge as in

Soft/loose soil

Hard/dense soil

Soft/disintegrated rock.

Excavation in trenches exceeding 1.5m wide and n exc. 3 m in depth for pole foundation/laying cables in Hard/dense soil all as directed.

Returning filling in excavated soil in trenches, watering and well ramming in layers not exc 25 cm complete all as specified.

Removal of surplus excavated spoil to distance not exc 50 metre all as specified and directed

M&L for clean dry river sand cushioning to undeground cables in trenches including spreading, levelling hand punning and onsolidating complete all as specified. Note- thickness after punning down shall be measured and paid.

Supply & Laying in replacement of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 90 mm and inner dia 76 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable incl couplers & bends complete all as specified.

Supply & Laying in replacement of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable incl couplers & bends complete all as specified and directed.

Supply and lay factory made, ISI marked, un-reinforced precast concrete cable cover class LV type-1, falt of size 250mmx150mmx40mm complete all as specified.

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying of pipe for laying of UG cables and making good with PCC (1:3:6) type C1 (using 20mm graded stone aggregate)

M & L and erect in true vertical position (or to be fixed in an inclined position as strut pole) steel tubular swaged poles complete with MS base plate of 6 mm thick of size 300 mm x 300 mm, finial taper plug, pole cap, bolts, nuts and washers and screwed pole made out of FRW MS tubing conforming to IS-2713 (Part-II) 1980 type 410-SP-31 ( 9 meters long ) pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete, etc complete all as specified and directed in and incl taking down carefully old deterioiated RCC/steel pole.

M & L for PCC 1:3:6 type C2 using 20 mm graded stone aggregate for coping of poles/plinth blocks of LT poles etc incl fair finishing the exposed surfaces even and smooth without using extra cement including necessary form work complete all as specified & directed.

M & L for PCC 1:4:3 type D2 using 40mm graded stone aggregate for foundation of poles complete all as specified and directed.

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 4 core 16 sqmm in and including taking out old one all as specified and directed.

All as per item No.77 above, but of the size 4 core 25 Sqmm

All as per item No.77 above, but of the size 3.5 core 35 Sqmm

All as per item No.77 above, but of the size 3.5 core 50 Sqmm

All as per item No.77 above, but of the size 3.5 core 70 Sqmm

All as per item 13 above but of the size 3.5 core 95 Sqmm

All as per item No.77 above, but of the size 3.5 core 120 Sqmm

All as per item No.77 above, but of the size 3.5 core 150 Sqmm

All as per item No.77 above, but of the size 3.5 core 185 Sqmm

All as per item No.77 above, but of the size 3.5 core 240 Sqmm

All as per item No.77 above, but of the size 3.5 core 300 Sqmm

M&L for fault detection in damaged UG cables using cable fault detector/locator, vehicle mounted to accuracy of 2m for various locations inside CME for UG cables of any size & any type upto 22kv grade including excavation & earthwork in any type of strata of size 4x2x0.6m to visually inspect/repair the damaged cable when and where directed by Engr-in-charge.

Supply and fix straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5/4.0 x 25-50 Sqmm complete all as directed by Engr-in charge.

Supply and fix straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 70-120 Sqmm complete all as directed by Engr-in charge.

Supply and fix straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 150-185 Sqmm complete all as directed by Engr-in charge.

Supply and fix straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 240-300 Sqmm complete all as directed by Engr-in charge.

Material and labour in replacement of old broken ACSR with aluminium conductor steel reinforced streching without kinks / bends and binding with insulators on street poles complete all as specified and directed by Engineer-in-Charge.

Material & labour in replacement of old cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed inclusive of one primer coat, one under and one finishing coat of aluminium paint all as specified and directed.

Material and labour in replacement of pin type, porcelain, vitreous, white brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 Volts grade.

Material and labour in replacement shackle type porcelain vitreous white, brown or green insulator incl GI mild steel strip, washer, insulator bolts, washers and nut for working pressure 1100 volts section of strips 31 x 3 mm,max dia 90mm, height 75 mm,dia of bolt 12mm upto 9 metre long

S & F in replacement of stay assembly complete with accessories as shown in electrical plate No 1 incl GI Adjustable Stay Rod of 20 mm Dia, GI Stay wire of size 7/4 mm incl stay clamps, loop type insulator, excavation in any strata and PCC 1:3:6 type C2 all as specified and directed.

M & L for loose filling with aggegregates of gauge 40mm in switch yard and surrounding to LT panels complete all as specified and directed.

Re-stringing of over head line ACSR conductor on existing lines by unbinding at each pin/shackle/Disc type insulator and re-fixing the same after stretching conductor, removing excess sag, maintaining proper distance between conductors as specified, tightening of stay wire, binding of PVC line seperators two per span, all as specified and as directed for the following types of configurations:-

Set of four

Set of two

Guard wire

M&L for cutting of tree branches n.exc 10 cm in girth along LT OH lines at distance not less than 3 m distance from both sides of conductors complete incl clearing of bushes any type not less than dia 10 cms and all other growings around respective poles of area not less than 4 sqm all when and where as specified and directed.

M&L for clearing of grass shrubs and other growing by uprooting in switchyards and electric installations upto 10 cms in girth at various locations as directed.

Supplying and laying GI tubing light grade 80 mm dia incl all accessories for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works including taking down old tubing all as specified and directed.

All as per item No.102 above, but size 50 mm bore

All as per item No.102 above, but size 40 mm bore

M&L for MCCB 4 pole, 400 Amps, 415 V, 50 kA thermal magnetic release adjustable type complete all as specified and directed. Make : Indoasian/L&T/Legrand/Havells

M&L for MCCB 4 pole, 250 Amps, 415 V, 36 kA thermal magnetic release adjustable type complete all as specified and directed.

M&L for MCCB 4 pole, 160 Amps, 415 V, 25 kA thermal magnetic release adjustable type complete all as specified and directed.

M&L for MCCB 4 pole, 125 Amps, 415 V, 25 kA thermal magnetic release adjustable type complete all as specified and directed.

M&L for MCCB 4 pole, 100 Amps, 415 V, 25 kA thermal magnetic release adjustable type complete all as specified and directed.

M&L for MCCB 4 pole, 63 Amps, 415 V, 25 kA thermal magnetic release adjustable type complete all as specified and directed.

Material and labour for fixing aluminium terminals (thimbles) in 1100 volt LT XLPE cable upto size 50 sqmm incl dismantling old thimbles of any type.

Material and labour for fixing aluminium terminals (thimbles) in 1100 volt LT XLPE cable upto size 70-185 sqmm incl dismantling old thimbles of any type.

Material and labour for fixing aluminium terminals (thimbles) in 1100 volt LT XLPE cable upto size 240-400 sqmm incl dismantling old thimbles of any type.

Material and labour for shifting heavy items / earth work / cleaning areas / clearing site by providing crane/ hydra/ excavators/ tractors/trolley etc as required at site complete, all as specified and directed.

M&L for chemical spray (DC> 2-26 having container 415ml/300g for precision blended multipurpose product for prevents corrosion penetrates, lubricates, displaces and seals out moisture release rusted mechanism cleanse etc.

M & L for spraying chemical glyphosate concentrate on area to remove unwanted vegitation/grass at various locations as directed. Note : (i) Labour and equipments to spray chemical on required area are incl in quoted rates. (ii) Spray will be repeated quarterly or as per direction of Engr in Charge.

M & L for preparation of old painted surfaces of electric pole covered by dust and other deposited materials by cleaning from steel tubular pole of length upto 11 metres including cross arms, bracing, clamps etc and painting with one coat of aluminium paint complete all as specified and directed. Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the repairing of coping with cement / PCC.

M & L for preparation of old cement based painted surfaces of RCC pole 9 mtr by cleaning of deposited materials, and painting with one coat of exterior emulsion weather coat paint of approved make and colour complete all as specified and directed. Note: (i) The quoted rate shall includes marking of numbers on each LT pole as per direction of Engr-in-Charge. (ii) The quoted rates shall including the repairing of coping with cement / PCC.

Taking out old unserviceable LT panel and supply, installation, testing & commissioning, dust, weather & vermin proof L.T feeder pillar box (approx size 1.5m x 0.5m x 1.2m) factory fabricated (penal shall be got manufactured from any manufacturer duly approved by CPRI) outdoor cubicle/KIOSK type totally enclosed outer cage fabricated with 3.15mm thick MS sheet with frame made of MS angle iron 50x50x5 mm suitable for operation on 3 phase 4 wire, 440V 50 Hz system, with hinged panel doors on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/ rubber/ wooden bushes to prevent ingress of water/ vermin etc, inside the enclosure. All the holes shall be fixed with chromium plated brass cable glands for cable entry/exit with & including necessary internal wiring with stranded PVC insulated FRLS copper conductor cables of adequate size. The kiosk/ box shall be powder coated internally /externally of approved colour. Quoted unit rate shall be deemed inclusive of PCC foundation, angle iron legs of 50cm above ground level made of angle iron 50x50x5mm & the following accessories:-

Copper bus bar rectangular 600 Amps full for phase and half for neutral and interconnection of MCCBs to Bus bar mounted on epoxy insulators with colour coding PVC sleeves.-01Job

MCCB 400 Amps, 4 pole 415 Volts, 50 Hz, 25 KA, thermal magnetic release adjustable type- 01 No ( Incoming)

MCCB 250 Amps, 4 pole 36 KA - 02 Nos ( Outgoing)

MCCB 125 Amps, 4 pole 25 KA - 05 Nos ( Outgoing)

MCCB 100 Amps, 4 pole 25 KA - 02 Nos ( Outgoing)

RYB LED phase Indicator Lamp set - 01 No

Three pole Contactor 63 A Current Rating 70A General use 10A, 415V with coil Make L&T Model MNX 70 Three pole contactor complete. Make L&T cat part No CS97076/Legrand/schneider - 01 No.

Digital timer switch with inbuilt backup current capacity 16 Amps operated on 415 volts AC 50Hz, Make: Indoasian cat part No TDA43111/ Legrand/Indoasian - 01 No

Provision of cubicle as per above description to accommodate the above mentioned accessories.

Internal wiring of panel board, metering equipment with suitable size PVC insulated, unsheathed, 1100 V grade cable with multistranded copper conductor, including provision of lugs/thimbles on either ends of cable.

M & L for preparation of old painted surfaces of LT Panel covered by removing dust and other deposited materials from panel of any size and type including repair of panel door by welding work, hinges, nut, bolits, clamp etc and painting with one coat of synthetic enamel paint of existing colour complete all as specified and directed.

M & L for removing of old rusted LT panel stand and supply & fix new LT panel stand made out of MS angle 50 x 50 x 6mm grouted in cement mortor 45 cm below ground level and 60 cm above ground level incl taking out electric connection from panel, lifting of panel from existing position and refixing and reconnecting after welding new stand for panel size not less than 1.2 mtr long, 0.5 mtr wide including painting to new surface of stand with one coat of red oxide and two coat of synthetic enamel paint black colur complete all as specified and directed. Note:- Rate of lifting of panel, earthwork for cable loop opeining, returning filling shall deemed to be inclusive in quoted rate.

Taking out of Old ACB and Supply and fixing LT Air Circuit Breaker, 4 pole, manual fixed type, 415 volt with thermal magnetic release of 630 Amp Ics=100% Icu, 50 kA neutral overload protection, inbuilt temp protection upto 90 degree celcius, rotatable terminals for horizontal/vertical orientation, fast operation and fixing the same in existing panel including necessary modification with angle iron and plain sheet all as directed.

Supply and fixing PVC LT line spiral spacer for 2 wire

Supply and fixing PVC LT line spiral spacer for 3 wire

Supply and fixing PVC LT line spiral spacer for 4 wire

M/S kirpan Enterprises

metro electrical services

Sachin Electricals

ONKAR ELECTRIC AND GENERAL STORE

TULAJA ENTERPRISES

SHREE VAIBHAV ELECTRICALS