OT-02/2020-21 of SE/ CDC 1 TANTRANSCO Supply and erection of cable accessories and laying of 110KV UG cable

Amount

Supply for 110KV Outdoor termination supporting structure and spring loaded clamps

Supply for 110KV LAS Structure

Supply of single phase link box with CCPU

Supply of single phase link box without CCPU

Supply for earthing materials for Outdoor termination, LAS and accessories

Erection charges for 110KV Outdoor termination including structure and LAS including structure, link box

Erection of earthing materials for Outdoor termination, LAS and accessories

Earth work excavation in all soils including all lead, lift, labour, tools & plants etc., complete.

Dismantling the brickwork, wherever occur of any thickness including clearing, lead, lift, labour, tools & plants etc., complete as per direction of Engineer-in-charge.

Dismantling the plain cement concrete, wherever occur of any thickness including clearing, lead, lift, labour, tools & plants etc., complete as per direction of Engineer-in-charge.

Dismantling the Reinforced cement concrete, wherever occur of any thickness including clearing, lead, lift, labour, tools & plants etc., complete as per direction of Engineer-in-charge.

Transporting and clearing the excess excavated earth and debris then and there and as soon as immediately to avoid any hinderence beyond a distance of 5km from the work spot as per the direction of Engineer at site. Including loading and unloading charges etc.,complete.

Refilling with filling sand in layers well rammed, watered and compacted as per standard specification including cost of all materials, lead, labour etc., complete.

Back filling with excavated earth is layers suitable in layers well rammed, watered and compacted as per standard specification including cost of all materials, lead, labour etc., complete.

Laying Plain Cement Concret 1:4:8 using 40mm using HBG (MB) Including cost of all materials,lead,lifts and labour etc., complete and as per std. specification.

Providing, Fabricating and placing in position of Steel Reinforcement Including cost of materials and cutting,bending,tying etc., complete.

Laying RCC M20 Design mix using 300kg minimun cement content and using 12 to 20mm HBG (machine broken) for cable duct including cost of all materials, lead, lift and labour complete as per std.specification. R.C.C Bottom Slab

Laying RCC M20 Design mix using 300kg minimun cement content and using 12 to 20mm HBG (machine broken) for cable duct including cost of all materials, lead, lift and labour complete as per std.specification. R.C.C side walls

Laying RCC M20 Design mix using 300kg minimun cement content and using 12 to 20mm HBG (machine broken) for cable duct including cost of all materials, lead, lift and labour complete as per std.specification. RCC precast slab

Laying RCC M20 Design mix using 300kg minimun cement content and using 12 to 20mm HBG (machine broken) for cable duct including cost of all materials, lead, lift and labour complete as per std.specification. RCC Plinth

Transporting of 1X630 Sq.mm 110KV XLPE UG cable drums each weighing approximately 7T in lorries using adequate capacity truck mounted crane for both loading and unloading including labour required for loading, transporting, unloading, driver bata etc.,Supplying and Providing of Winch,steel wire drum, cable drum stand, rollers, ramp and other T&P 's required for laying to the work site by engaging lorry and crane for site (No material will be supplied from department stores.) Positioning of winch ,D.G.set and others rollers for cable laying on a day before laying, Laying of cables in trench and duct by means of winch over rollers, dressing the cable in trefoil formation, tying the cable with nylon rope at every 3m intervals.The rate includes the cost of pulling the steel wire rope from winch side to drum side,devolution of any balance cables to CDC stores, all tools & plants, labour consumables, lead, lift etc., complete.

Loading at site,Transporting to EB Store and unloading Empty 110KV cable drums each weighing approximately 1 to 1.5T and in lorries from various work site (3 Drums at a time) including cost of all lead, Lift, labour, Tools and plants, etc., complete.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)