water supply

ELEC-5.6.1-Manufacture, Supply & Delivery of MDPE pipe conforming to ISO 4427 Part-2 (or any equivalent Bureau of Indian Standards code) of PE-80 grade material including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation to anywhere in Telangana but excluding GST. 20mm OD-SDR-11-PN-12.5

Supply and Fixing of Compression Fittings shall comply with ISO 17885 –2015, PN-16 rating and manufactured from virgin resin of PE-80 having blue colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption. Compression fittings should have moulded-in SS 304 threaded insert outlet with thread dimension conforming to IS 554/ISO 7. The cost shall include testing of all materials, labour, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking, providing and fixing etc. Complete as specified and directed by the Departmental Engineers, but excluding all taxes.Compression Male/ Female threaded adapter with SS Insert D20mmx1/2"

Supply and Fixing of Composite Strap Saddle shall be of wrap around design, PN-16 rating. Body shall be manufactured using virgin compounded PE80/PE100 polymer with Stainless steel 304 grade stirrupplate mounted with PE straps(Engineering plastic) with Nut bolt joint. Sealing between the saddle and mains shall be obtained by using an elastomer seal(Underneath projection for self interlocking).The cost shall include testing of all materials, labour, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking, providing and fixing etc. Complete as specified and directed by the Departmental Engineers, but excluding all taxes.100X1/2''

Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.100mm dia-PN 16

TBSP-G.I-01-S& F 15 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete

TBSP-G.II-13-S & F 15 mm nominal size copper body float valve with PVC ball Indian make ISI mark

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes.6.0 Kgs/cm2, Each pipe 6Meter length.20mm 10.0 Kgs/cm2

ELEC-5.5.1-Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. With SS enclouser comprising of contactor with bi-metalic relay with necessary push buttons, etc.,complete suitable 5.00HP, Makes: Siemens / Crompton / L&T / BCH/ABB-Upto 7.5.HP.

PORCELAIN REWIRABLE FUSE UNITS - ELEC-2.5.1-Supply of 63A 415V Porcelain Rewirable Fuse Units. Makes : C&S / GM / Sputnik / Kundancab / Million / Gold Medal / Vimal / Star / Benlo.

PORCELAIN REWIRABLE FUSE UNITS - ELEC-2.5.1-Supply of 100A 415V Porcelain Rewirable Fuse Units. Makes : C&S / GM / Sputnik / Kundancab / Million / Gold Medal / Vimal / Star / Benlo.

ELEC-1.6.3-Supply of 3 Core 2.5 Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / LK (L&T) -2.5 Sqmm-100mts

Supply and delivery of 75MM C.I.D joints including all taxes and transportation

Supply and delivery of 90MM C.I.D joints including all taxes and transportation

Supply and delivery of 110MM C.I.D joints including all taxes and transportation

Supply and delivery of 110mm dia pvc shaddle including all taxes and transportation

Manufacture as per BIS:12820/2004 with S.B.R. Quality Rubber conforming to BIS: 5382/85, supply and delivery of Rubber Gaskets suitable for C.I/ D.I S/S pipes anywhere in T.G. F.O.R. Destination departmental stores including cost of material, loading, incidental handling with companies standard packing, transportation, unloading & stacking but excluding taxes.-100mm dia

ELEC-5.15.2- Supply, Transportation and fixing of seamless cast iron adopter assembly (Two Nos at bottom of the pipe to coupling to the pump set and the other at top end of the pipes) for installing the pump set with pipes including cost and conveyance of all materials, taxes etc., complete.-OD 75mm

ELEC- 5.15.4-Supply, Transportation and fixing of following MS threaded Flanges 2 Nos with nuts and bolts including cost and conveyance of all materials, taxes etc., complete. -65mm dia MS flanges set (2 Nos) 165mm dia OD, 12mm thick each flange with required dia bolts and nuts

Supply and delivery of 3" pipe vice at site as decided by section officer concerned including cost of materials, labour charges, conveyence charges, all taxes such as GST etc complete

Supply and delivery of 24" Pipe wrench at site as decided by section officer concerned including cost of materials, labour charges, conveyence charges, all taxes such as GST etc complete

Supply and delivery of 18" Pipe wrench at site as decided by section officer concerned including cost of materials, labour charges, conveyence charges, all taxes such as GST etc complete

Supply and delivery of 12" Pipe wrench at site as decided by section officer concerned including cost of materials, --labour charges, conveyence charges, all taxes such as GST etc complete

Supply and delivery of 10" Screw spanner at site as decided by section officer concerned including cost of materials, labour charges, conveyence charges, all taxes such as GST etc complete

S/D of Starter Empty Box for 5.00HP, 6.00HP and 7.50HP Submesrible Pumpsets including cost of materials, labour charges, conveyence charges, all

S/D of Automatic (Preventor) for 5.00HP, 6.00HP and 7.50HP Submesrible Pumpset's including cost of materials, labour charges, conveyence charges, all taxes such as GST etc complete.

TBSP-H.III-07-100 ml - Solvent Cement including all taxes and transportation

M-Seal Regular Epoxy Compound Putty Sealant Adhesive for Leakage, Bonding, Gap Filling & Repairing (1kg)

G.I Bolts / Nuts and Washers ( 1/2'', 3/4'') 32MM including all taxes and transportation

PVC end cap 20mm including all taxes and transportation

PVC end cap 63mm including all taxes and transportation

PVC end cap 75mm including all taxes and transportation

PVC end cap 90mm including all taxes and transportation

50MM G.I. Coupler including all taxes and transportation

G.I. 20mm Nepple including all taxes and transportation

PVC 20mm treded end cap including all taxes and transportation