Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Contract is awarded to M/s Nathkrupa Construction | |
| 2 | L2₹34.4 L+₹1.1 L (3.19%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L2 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 3 | L3₹35.3 L+₹1.9 L (5.82%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 4 | L4₹35.7 L+₹2.4 L (7.07%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than lowest quoted rate | |
| 5 | L5₹36.4 L+₹3.0 L (8.98%)Rejected-Finance | L5 | Rejected-Finance Rejected being other than lowest quoted rate |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
14 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Prakash G Kaleka AE (QSandC) AGE (Contracts)
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
REPAIR TO PATH, HARDSTANDING, GATES, SECURITY WALL AND OTHER MISC WORKS AT MIC and S UNDER GE(S) AHMEDNAGAR
2023_MES_629547_1
8124/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
AHMEDNAGAR
Class D Cat a(I)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer (South) Ahmednagar
₹80,000
Yes
20 Jan 2024
23 Nov 2023
16 Dec 2023
23 Nov 2023
14 Dec 2023
7 Dec 2023
23 Nov 2023 - 30 Nov 2023
Amount
Demolition of cement concrete in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
Demolition of brick work/stone masonary built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
Demolition of precast concrete block walling, precast concrete articles built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
Dismantling of posts or struts (wood, steel or RCC) of any section embedded in concrete, brick work, masonry etc. including taking out embeded portion and making good disturbed ground complete all as specified and directed.
Dismantling old fencing wire mesh/chain link fencing, any description complete all as specified and as directed.
Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and as directed.
Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed.
Taking down cement plaster on walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Excavation in post holes, in soft / loose soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.
Excavation in trenches n exc 1.5m wide & n exc 1.5 m depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
Earth work in excavation by mechanical means (Hydraulic excavator) in all kind of soil in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 m all as specified and as directed.
Earth work in excavation by mechanical means (Hydraulic excavator) in all kind of soil over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, all as specified and as directed.
Returning, filling in soil, including spreading, levelling watering & well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated soil to distance n exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.
M&L for hardcore of broken stone or boulders, guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc. complete all as specified and as directed.
M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping , cills, plinth courses, string courses, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.
M&L for providing precast cement concrete block masonry with solid blocks of PCC 1:2:4, type B1, using 20 mm graded stone aggregates exc.10 cm in width, including all mouldings, set in cement mortar 1:4 complete all as specified and as directed. (Note: The cost of form work shall deemed to be included in the unit rate quoted.
M&L for 45 to 50 mm thick precast RCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in wall panels for compound wall including interlocking arragements with precast RCC columns and adjecent wall panels as per approved design/patterns, set in cement mortar 1:4, (measured solid) including all mouldings but excluding frame (columns) complete all as specified and as directed. (Note: (i) The cost of reinforcement and form work shall deemed to be included in the unit rate quoted. (ii) Columns/ posts shall be measured and paid seperately)
M&L for precast RCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in columns, posts, boundary pillars with and including grooves to locking of precast RCC precast wall panels, set in cement mortar 1:4 complete all as specified and as directed. (Note: The cost of reinforcement and form work shall deemed to be included in the unit rate quoted.
M&L for RCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, struts etc area exc 100 & not exc 250 Sqcm including form work etc complete all as specified and as directed Note : Reinforcement shall be measured and paid seperately.
M&L for precast cement concrete block masonry with solid block of PCC (1:5:8), exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed.
M&L in repairs, for pre-cast cement concrete jalli, 35 mm thick (measured solid) in pre-cast cement concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates, including all mouldings, set in cement mortar 1:4 complete all as specified and as directed.
M&L for brickwork with fly ash bricks, old size, straight or curved on plan built in ement mortar 1:6 complete all as specified and as directed.
All as per serial item No. 26 above but except bricks complete all as specified and as directed. Note : Old bricks obtained from demolition shall be reused.
M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
All as per serial item No. 28 above but except stones complete all as specified and as directed. Note : Old stones obtained from demolition shall be reused.
Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20 mm to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and as directed.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed.
All as per serial item No 31 above but 6 mm to 8 mm dia.
All as per serial item No 31 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
S&F mild steel angle/flat iron as in fencing posts/struts for securing barbed/chain link fencing of any description including drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F framed work as in doors or gates of angle/hollow section or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conforming to Fe-410-0 or Fe-310-0 all as specified and as directed. Note : Disturbed surfaces of wall shall be made good to match with the existing surfaces.
Fixing only mild steel gate of any type or any description including hold fasts, locking arrangements, wheel track and sliding door bolt as required for hanging; also fastening and fixing and makig the door smoothly working complete all as specified and as directed. Note: Old serviceable dismantled gate shall be reused.
S&F in repairs, galvanized, 2 strand, steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs, at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed.
Supply only mild steel galvanised chain link fencing, made out of GI wire, complete all as specified and directed. Note :- Dia and mesh shall be as decided by GE and weight of chain link fencing shall be decided by BOO ordered by GE.
Fixing only chain link fencing wire mesh, size and any type to any standards, rails, straining bolts including provision of binding wire etc. and fixed complete all as specified & as directed.
S&F mild steel plain round bars 10mm dia and over as in line bars for fixing chain link fencing including cutting to length, bent to shape required, hooking ends complete all as specified and as directed.
S&F mild steel bolt, machine made, 10 mm dia of shank with hexagonal or square head one end and screwed the other or screwed both end, each screwed end to be fitted with, washers and one hexagonal or square nut, exceeding 5cm but not exceeding 10 cm long complete all as specified and as directed.
M&L for 100 mm thick, cement concrete 1:2:4, type B1 (using 40 mm graded stone aggregates) as in path/hard standing and flooring, laid in alternate bays, finished even & smooth without using extra cement including necessary formwork complete all as specified and as directed.
M&L for 18 to 20mm thick machine cut granite slabs ( shade as approved by GE), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 20mm thick screed bed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for 60mm thick, factory made precast cement concrete interlocking tiles, roubber moulded with strength M-35 grade as in floor/pavement laid over and including 50 mm thick crush sand cushioning laid dry to the profile complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on other than fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed.
M&L for flush pointing to random rubble masonry, uncoursed or brought to course in cement mortar 1:4, including racking out joints etc. complete all as specified and as directed.
M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over a coat of primer all as specified and as directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description not otherwise described not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
S&F in repairs 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber ring joint, laid in trenches or in floors or in masonry as in spouts, weep holes etc complete all as specified and as directed.
Vinod Enterprises
AMAR CONSTRUCTION
MS. G.A. CONSTRUCTION
PRADIPKUMAR POPATRAO THUBE
DHANANJAY BABAN KALANE
M/s IBEX Engineers and Contractors
M/s Meher Construction
M/S VISHWAJEET SHANKARRAO KULKARNI
M/s Mauli Construction
Sunil Kanhoji auti
TAMBOLI CONSTRUCTION
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .