REPAIRS TO SUNKEN FLOOR, DADO, SOIL WASTE VENT AND WATER SUPPLY PIPES, SANITARY FITTINGS, PLUMBING INCLUDING CLEANING OHTS AND REPAIR TO WOODEN ALUMINIUM STEEL JOINERY AND CONNECTED WORKS OF C1 AND C1A AREA UNDER GE(EAST) MATHURA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified.

M&L for light shade vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick in CM 1:4

M&L for coloured Glazed ceramic tiles on vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick backing coat of cement mortar in 1:4 complete all as specified.

Demolition of concrete of any description and in any position not otherwise specifically provided for as in sunken floor etc. complete all as specified.

M&L for Providing cement concrete M-15 grade (Nominal mix) using 12.5mm graded stone aggregate in padding in sunken slab concrete to achieve proper slope including cutting holes in bricks or RCC for spout pipe complete all as specified & directed by Engr-in-Charge.

M&L for PCC M-5 grade (Nominal mix) using 40 mm graded stone aggregate as in filling in sunken floor.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. Make of the material :Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L Brick work with old size fly ash bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6.

Taking down cement or cement lime plaster on brick or stone walls, etc. including racking out joints,hacking for key,scrubbing down with water, etc complete.

M&L for rendering 10 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and directed.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquied WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for Rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in CM 1:6 complete.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparing newly plastered surface of wall and applying three coats of white wash complete.

S&F in repairs high density polythene pipe 32 mm (HDPE) of pressure @ 6 Kg/Sqcm laid in trenches/wall

S&F in repair 75 mm dia PVC floor trap plain with grating including jointing with solvent cement complete all as specified.

M&L for 150mm x 150mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1complete all as specified in repairs.

S&F in repair 110mm bore dia PVC (SWR )vent cowl complete all as specified.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified.

S&F in repair 75 mm dia PVC (SWR) bends with access door any radius complete all as specified.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) junction single T bore 110 mm complete all as specified and directed.

S&F in repair PVC (SWR) junction single T with access door bore 110 mm complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F in repair 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F in repair PVC (SWR) 110 mm dia pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls complete all as specified.

S&F in repair Pillar Cock with extended Lever Handle for Medical use complete fixed to wash basin/sink all as specified and directed. Make:-Jaquar Cat No. FLR-5031N or equivalent of makes as specified in the list of makes.

S&F in repair Toilet Roll Holder fixing to wall complete all as specified. Make:-Jaquar Cat No.ACN-1151N or equivalent of makes as specified in the list of makes.

S&F in repair Single Lever Basin Mixer with 450 mm long braided hoses complete all as specified and directed. Make:-Jaquar Cat No.FLR-5001B or equivalent of makes as specified in the list of makes.

S&F in repair Towel Rack 600 mm long with lower Hangers complete all as specified and directed. Make:-Jaquar Cat No.ACN-1181N or equivalent of makes as specified in the list of makes.

S&F in repair Wall mixer with 115mm long Bend pipe , connecting legs & wall Flange complete all as specified and directed. Make:- Jaquar Cat No.CON-281KN or equivalent of makes as specified in the list of makes.

S&F in repair Towel Rail 600 mm long complete all as specified and directed. Make:- Jaquar Cat No.ACN-1111NM or equivalent of makes as specified in the list of makes.

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified.

Refixing old steel tubing and new fitting/connections in new or old position(wall, ceiling, floors etc.) 15 mm bore.

Refixing old steel tubing and new fitting/connections in new or old position(wall, ceiling, floors etc.) 20 mm bore.

Supplying & fixing to wall and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Supplying & fixing to wall and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F in repair 15 mm dia bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15 mm dia angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S&F in repairs stop valve, 15 mm dia chromium plated with long shank and cup (Concealed type) both ends for iron pipe.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste coupling, pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screw all as specified and as directed. Make:- Prayag Cat No 551 or equivalent of make Commonder / Neelkamal / Polytuff

S&F in repairs 15 mm dia brass chromium plated pillar tap long shank with fly nuts capastan head screwed down high pressure with or without letter hot or cold with long screwed shank complete.

S&F in repairs PVC flexible waste pipe 32 mm dia for fixing in urinals and wash basin complete.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs corner racks with glass of size 300x300mm 8mm thick bevelled on edges with two brackets CP all as specified.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F Shower arm 15mm dia, with flange fixed to wall complete all as specified.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connection complete.

S&F in repair colour european type combination pattern WC casket type christinna with mounted flushing cistern , PVC connection,seat cover and jointed to sewage pipe. Make:- CERA cat No. S1013119 or equivalent approved makes given under list of makes.

S&F in repairs PVC Jet for EWC complete set including 15 mm long as directed .

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified.

S&F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified.

S&F in repairs flush handle PVC with adjustable lever and hook for low level flushing cistern complete.

S&F in repairs PVC syphon complete for low level flushing cistern complete all as specified.

S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete.

S&F in repair 15 mm dia two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair Health faucet of superior quality ABS body 1.2 m long flexible tube and wall hook including fixing complete all as specified and as directed.

S&F in repair waste coupling of 32 mm size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair waste coupling of 40 mm size brass chromium plated for sink , etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed.

S&F in repair 600 mm long PVC connections 15 mm size with Brass nuts at both end complete.

S&F in repairs towel rail 600 mm long 20 mm dia fixed with steel screw etc complete all as specified.

S&F in repair stainless soap dish fixed to wall complete all as specified and directed.

S&F in repair 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms) complete.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating monkey protection type with frame including nut bolt complete.

S&F in repairs stainless steel grating (round) 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified.

Supply and fix in repair 500 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Supply and fix in repair 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.

Cleaning of HDPE tank of capacity up to & including 500 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

Cleaning of HDPE tank of capacity up to & including 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing complete all as directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed.

S&F in repair stainless steel kitchen plate rack of size 775mm x 750mm x 250mm deep, fabricated with 0.63 mm sheet fixed in position on wall complete. Make:- Prayag cat No P-346 or equivalent of make specified in Appx 'B'

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

S&F sinks with draining board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S&F in repair 15-20mm GI reducer complete.

S&F in repair 20 mm bore GI Union complete.

S&F in repair 20 mm bore GI Elbow complete.

S&F in repair 20 mm bore GI socket complete.

S&F in repair 15 mm bore GI Tee complete.

S&F in repair 15 mm bore GI Union complete.

S&F in repair 15 mm bore GI Elbow complete.

S&F in repair 15 mm bore GI socket complete.

S&F in repair 15 mm bore 150 mm long Nipple

S&F in repair 15 mmbore 125 mm long Nipple

S&F in repairs GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe of 15mm bore.

S&F in repairs GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe of 20mm bore

Resecuring or easing & adjusting without taking down door shutter area n exc 1 sqm each complete.

Resecuring or easing & adjusting without taking down door shutter area exc. 1 Sqm but n exc 2 Sqm each complete.

Taking down Chowkhats or frames exc 1.5sqm but n exc 4sqm each and making good the disturbed surface complete all as specified.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each and making good the disturbed surface complete all as specified.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 Sqm and n.exc 4.00 Sqm each and making good the disturbed surface complete all as specified.

Taking down shutters of any description exc 1.00 Sqm and n. exc 2.00 Sqm each.

S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 125x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L cement concrete M-10 grade (Nominal mix) using 20mm graded stone aggregate as in bed blocks for fixing hold fasts and fillling of chowkhats etc. all as specified.

M&L for applying two coats of synthetic enamel paint on primed steel surface of any description over 10 cm width or girth complete all as specified.

S & F 30 mm thick factory made plain, framed, panelled shutters second class hard wood, kiln seasoned and chemically pressure treated with panels and supply to fixed with chowkats as specified and directed by Engr-in-Charge.

S&F 30 mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges offraming plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Supply & Fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Supply & Fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S & F 30 mm thick flush door shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforcement with MS square tube supplying and fixing in opening as per specification & sketch shown in sketch 8 of SSR part II.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II.

M&L for powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including power coating.

M&L for powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for powder coated (powder coating shall not be less than 50 microns of approved colour) aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 5 mm Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 5 mm Sheet glass,ordinary quality and glazing with rubber beading in square exc 0.5 sq. m in each pane

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated prelaminated both sides with decorative choice laminations fixed to aluminium shutters complete all as specified.

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supply & fix 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed.

S&F 150 mm long aluminium anodised handle fabricated type all as specified and as directed by Engineer-In-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded fixed to wall including one shop coat of redoxide primer complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded fixed to wall including one shop coat of redoxide primer complete all as specified and directed.

S&F 2nd class H.W small articles such as door window stoppers including all necessary labours articles n.exc 200 Cucm each complete.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete.

S&F 3.00 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane complete all as specified.

S&F in repair 2nd Class hard wood plain fillets square/ rectangular in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, wrought and fixed with nails complete

S&F in repair 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) ISI marked and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.

Supply & fix in repair 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F in repair 100mm size aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge.

S&F in repair 150 mm long aluminium anodised handle, fabricated type all as specified and as dierected by Engineer-In-Charge.

S&F in repair 100 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed.

S&F in repair 300mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete.

S&F in repair 100 mm size 4-lever mild steel mortice lock vertical type with two keys etc complete.

Taking down Aluminium shutters and dismantling stiles & rails including glass panes/particle board carefully.Refabricating and refixing in frame position using all old material including replacement of required neoprene packing,cleats,screws and 2 No.s of 6 m dia G.I. full thread bolts to the full width of shutter one each at top and bottom using 2 No.s of GI nuts to each stiles with necessary Aluminium angle cleat screws etc. complete all as specified and directed by Engineer in charge.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, groverning pivot made of brass, other parts made of mild steel heavy duty made and fixed complete all as specified .

S & F in repair floor door stopper of Aluminium anodised body,double leg type with hard drawn rubber shoe 50 mm size.

S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete.

S&F in repair 250 mm size mild steel peg stay fixed to steel window (as per sample) complete all as specified.

S&F in repair mild steel handle for steel window etc complete all as specified and directed.

Spot welding in repair for fixing hinges/handle/ bolts/helical door spring etc complete.

S&F in repair 25 mm dia stainless steel drapery rod cut to size and fixed in position including brackets fixed to wall complete all as directed.

S&F in repair stainless steel end cap suitable for drapery rod of 25 mm dia complete.

S&F in repair 18/19 mm thick block board grade Ist quality exterior grade commercial type fixed with screw to timber frame work incl providing external teak wood lipping 6 mm thick fixed with nails.

S&F in repair 100 mm aluminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F 75 mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F in repair Door Seal fixed to door bottom rail with screws complete all as specified.

S&F 40 mm dia, cupboard knobs fixed with nuts, screw and washer of mild steel bright finished

M&L Brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls in CM 1:4.

M&L for preparation of old plastered surface of walls and applying one coat of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of Alkali resistant primer over a coat of cement base wall care putty complete all as specified and as directed.

M&L for preparation of old plastered surface of wall and applying one coat of distemper oil emulsion complete all as specified.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets.

Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm X 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm X 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm X 600 mm panel to form grids of 600 mm X 600 mm and wall angle of size 24 mm X 24 mm X 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm X 37 mm X 25 mm X 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm X 30 mm X 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications and as directed by Engineer-in-charge.

M&L 4 mm thick designer non-asbestos fibre cement building board having fire resistance & mosture resistance properly fixed on metal grid complete. Make - Everest

M&L for 2.50 mm thick Plain mild steel wire, galvanised class 3, in ceiling fixing to wood or steel rafters purlins tying wire, as directed (each line of wire to be measured)

S&F 5 mm thick printed PVC Sheet in strip & channel feathered at the edges for fixing on solid PVC wall linning, insulated PVC Wall linng and solid PVC Partition inclusive of solvent cement and fixing at site.

S&F PVC beading at the edges top and bottom of PVC wall lining complete all as specified.

Dismantling asbestos cement corrugated or semi corrugated sheets in roof covering incl ridge

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall, fixed with self tapping screws as specified.

M&L 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roof, walls etc fixed with L-type or J-type cranked hooks

M&L 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roof, walls etc fixed with L-type or J-type cranked hooks but except sheeting complete.

S&F 6 mm thick asbestos cement corrugated or semi-corrugated ridge in roof fixed with L-type or J-type cranked hooks

M&L for 25 mm thick PCC M-15 grade (Nominal mix ) using 12.5 mm graded stone aggreate as in floor finishes without using extra cement

S & F 18 mm thick PVC Celuka Ply Plain White color both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/cum) . Make- Rajshri Plastiwood or equivalent make given under list of makes.

S & F 18 mm thick Celuka ply of Single Side Prelam/ Rigidlam color fixed with screws, solvent cement/ adhesive to make kitchen cabinet front sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/cum). Make- Rajshri Plastiwood or equivalent make given under list of makes.

S & F 12 mm thick Rajshri Celuka ply of plain white(Matt finish) color fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the Engineer - in –charge- ( Density- 575 to 625 KG/CBM) Make- Rajshri Plastiwood.or equivalent make given under list of makes.

S & F stainless steel handles 125 mm size for kitchen cabinet shutters

M&L for providing cupboard lock with 2 set of keys complete all as specified and directed.

Demolition of stone slabs & tiles of any decsription or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar.

M&L for 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like, over and including 20 mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified

Taking down steel rolling shutter & repair to shutter by greasing oiling painting etc size of shutter n exc 15 Sqm each complete all as specified.

M&L for preparation of new wooden surfaces any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for providing maganatic catcher for fixing in cupboard ect complete all as specified.

M&L for providing aluminium composite panel for fixing in door etc complete all as specified and directed

M&L for providing PVC Film for Aluminium/Z section glass door/window making glass opauqe complete all as specified and directed

SHRI RADHAYSHYAM JHA

Ms Kamal Kant Agarwal