Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-Finance | L1 | Accepted-Finance Being Lowest | |
| 2 | L2₹7.2 L+₹96,326.80 (15.4%)Rejected-Finance 5766 AMBALA CANTT NEELKANTH ENGINEERS NICHOLSON ROAD VILLAGE TOWN PALLEDAR MOHALLA CITY AMBALA CANTT AMBALA HARYANA 133001 INDIA | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Being Not Lowest |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
28 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Capt Arvind Kumar
AGE (I) Dappar
Construction of units rep waiting area waiting area near IP gate at 33 FAD Dappar under AGE (I) Dappa
2023_MES_612182_1
AGE (I) DPR-20/2023-24
Open Tender
Civil Works
Works
180 days
AGE (I) Dappar1
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
AGE (I) Dappar
₹18,000
Yes
2 Sept 2023
4 Aug 2023
30 Aug 2023
4 Aug 2023
28 Aug 2023
14 Aug 2023
4 Aug 2023 - 14 Aug 2023
Amount
B/R Portion
Excavation in trenches n. exc 1.5 M depth and n. exc 1.5 M wide getting out soft/loose soil.
Returning filling in including spreading levelling watering and well ramings in layers not exc 25 cm
Removing Excavated material not exceeding 500M and n.exc 1.5 Km and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.
M&L for (PCC 1:4:8) type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete.
M&L for RCC Type B1 1:2:4 , 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia
Formwork to sides of soffits of floor or roof beams , hunching , girdes , bressummers , lintels , cantilevers, shelves including supports , overhangs etc ,complete all as specified and directed.
M&L brick work with sub class 'B' bricks strait or curved on plan exc 6 M mean radius built in CM 1:4 comp all as specified.
M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika
M&L for cement plastering 15mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L applying 02 coats of OBD preparation of newely plaster surfaces (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to new surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.
M&L for applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)
Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604.
S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified
S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf
S&F Powder coated ( Min thickness of powder coating 50 micron) Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F prepainted Galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall ,fixed with self tapping screws as specified.
M & L for joint free non-Skid whilte ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge
M & L for joint free non-Skid whilte ceramic tiles 7 to 8mm thick (square/rectangular) for skirtng /dado for wall area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match with and including 10 mm th backing coat in CM (1:4) complete all as specified and as directed.
S&F aluminium anodised snap grid frame work for false ceiling size 605X605mm alll as specified.
M & L for providing and fixing gypsum board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions including two coats of oil bound distemper over chalk whitning incl preparation of new surface of complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet of 0.5mm thick, rib having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge. Note : Fixing of sheets will be done strictly according as per manufacurer's instructions. Make : Tata Bluescope or equivalent as approved by GE
Dismantling wrought iron or mild steel work of any description
Fixing only Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc
S&F Plates Fe-410W(GdeE-250) Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc
S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square not exc 30cm long of dia neck n exc 12mm
M&L for applying two coats of synthetic enamel paint steel surfaces of any description, over 10cm in width or girth,not otherwise described.
M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.
M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.
M&L 25 mm thick PCC 1:2:4 type B1 (using 12.5 mm graded stone aggregate) laid in alternate panel in floorings including finishing the surface even and smooth without using extra cement complete all as specified and directed
M&L for 50 MM thick PCC 1:3:6 type B-1 using 20 mm graded aggregate as in floors/ plinth protection complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc
E/M Portion
M& L Point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable for mounting modular switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting PVC conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.
(a) One light / fan / Bell point controlled by one switch
(b) One socket outlet 5 Amps on theindependent board with other switches.
S&F Modular switch one way 6A , 1 Module type single pole 240 volts of Anchor Roma Urban Cat Pat Code No 66101 10AX, 1Way Switch,HSN Code 8536 or equivalent in Legrand/Schneider specified colour complete all as specified and directed by the Engr-in-charge.
S&F Socket, 6A- 2/3 pin combined 2 Module complete all specified.
S & F Modular metal flusSh box 1/2 module complete all specified.
S & F Modular metal flusSh box 3 module complete all specified.
S & F Modular metal flusSh box 6 module complete all specified.
S&F Modular White cover plate with frame, 2 module
S&F Modular White cover plate with frame, 3 module
S&F Modular White cover plate with frame, 6 module
S&F LED tube light fitting (including LED tube) 1 X 20W 230 Volt surface and wall mounted LED batten, extruded aluminium housing provided with efficient heat dissipation with polycarbonate diffuser & integrated electronic driver with all accessories internallyprewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size fixed on wall/ceiling complete all as specified and directed.
S&F connecting up testing and commissioning industrial corrosion proof IP 65 luminaire LED 30W suitable for security lighting made out of pressure die cast aluminium housing (including GI tubing 40mm dia, brackets, clamps and lamps) complete with all accessories prewired including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed . Make: Havells
Supply and fixing ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCB SP 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. Make: Legrand/ABB/Schenider
Supply and fixing 4 way power line SPN distribution board 240 volts with double door fitted with Bus Bars 200amp, IP-53, Neutral Links, Blanking Plates neutral bus bar, earth bar, dinbar, detachable gland plate , interconnections etc without MCB & ‘G FRAME’ complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. Make : Legrand/ABB/Schenider.
Supply and fixing MCB SPN 40Amps,10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. Make: Legrand/ABB/Schenider
M& L Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame etc.complete all as specified and directed by Engr-in-Charge.
Supplying & Fixing ceiling fan 1200 sweep complete with capacitor canopy, fan hook and down rod including flexible twin core copper conductor (23/0.76) with provision from ceiling rose/connector to fan complete all as specified & directed.
Supply and laying in trenches or fixing or passing through pipes or fixed to wall / pole 1100 volts grade XLPE insulated, armoured heavy duty electric cables with stranded aluminium conductor of cross sectional area 10 Sqmm 2 core complete all as specified and as directed.
Supply & fixing 40 mm bore tubes, light grade galvanised with all fittings and fixed laid in trenches complete all as specified and directed
Excavation in trenches in soft/loose soil n exc 1.5m wide andn. Exc1.5m deep and getting out includingforming bottom surfaces to required level or slope for taking out embeded cables,brick/pcc protective tiles and relaying new/old cable complete all specified and all as directed by engineer incharge.
M&L sand cushioningng (drysand) to under ground cable for cable protection provided with layers 8cm deep before laying and 15 cm after laying the cable complete all as specified and directed.Note :- Punned thickness will be measured only.
Supply and laying factory un reinforced precast concrete cable cover class LV, type-1, flat, size 250 x 150 x 40mm with ISI mark factory made complete all as specified & directed. Make-Mehtab Tiles(Indore)/Hind Mosaic(Upleta)
Removal of surplus excavated soil to a distance exc 50 m but not exc in 100 m and deposited where directed at a level n'exc 50 m above the starting point complete all as specified and directed.
Returning filling in soft/ loose soil in trenches including spreading, leveling watering and well ramming in 25mm thick layer complete all as specified and as specified.
M&L Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable size of cable 2x1.5 sqmm (line conductor) & 1x1.5 sq mm (earth conductor). 1100 V grade drawing in & includingheavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. For Building Street Light
Neelkanth Engineers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .