CONSTRUCTION OF MULTI PURPOSE BUILDING,SECURITY ROOM, ENTRY ARCH, HI-TECH NANDINI PARLOR, CC ROAD, EXPANSION OF HEALTH CENTER, SECURITY ROOM, WATER PROOFING WORK AND OTHER CIVIL REPAIR & MAINTANCE WORK AT MOTHER DAIRY, YELAHAKA, BANGALORE

CONSTRUCTION OF MULTI PURPOSE BUILDING,SECURITY ROOM, ENTRY ARCH, HI-TECH NANDINI PARLOR, CC ROAD, EXPANSION OF HEALTH CENTER, SECURITY ROOM, WATER PROOFING WORK AND OTHER CIVIL REPAIR & MAINTANCE WORK AT MOTHER DAIRY, YELAHAKA, BANGALORE

CIVIL WORKS Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 1.5m as per...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

In ordinary soft rock without blasting upto 1.5 m depth

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per ...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earthwork excavation in deposited soil and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead up...

Construction of Embankment by excavating the available approved Gravel Murrum deposited at a place or borrow pits during or prior excavation with alllifts and lead, transportation to site, spreading,...

Construction of Granular Sub Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavat...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and Filling in foundation with granite trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour wi...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

Providing and laying in position Reinforced Plain cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...

do M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates

do for Column Footings Retaining Wall Footings Raft Base Slab

Providing and laying in Reinforced cement concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite trap basalt crushed graded coarse aggregate...

do for RCC Wall with M 25

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

do for Lintel Tie Beam with M 25

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Above 9.60m to 12.60m Level

do for Staircase with M 25

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

do for Roof Beams with M 25

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

do for Roof Slabs with M 25

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

do for Chajja Roof Level RCC Gutter with M 25.

0.00m to 3.60m Level

Above 3.60m to 6.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing lath plaster with cement mortar 1 3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup bo...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing Thermo Mechanically Treated bars of grade Fe 500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and constructing granite trap basalt size stone masonry with hard stone in foundation and plinth in cement mortar 1 6, stones in courses not less than 20 cms high, bond stones at two m...

Providing Brick work 230mm thk with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 4 1 cement 4 co...

Providing and constructing Half brick masonry 115mm thk with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS...

Above 3.60m to 6.60m Level

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring ...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC Wood Polymer Composite solid door window Clerestory windows and other Frames Chowkhat comprising of virgin PVC polymer of K value 58 60 Sus...

Above 3.60m to 6.60m Level

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC Wood PolymerComposite solid plain flush door shutter of required size comprisi...

Above 3.60m to 6.60m Level

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections appropriate sections and other sections of approved make conformin...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions o...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber neoprene gasket etc. complete as per the architectural drawings and the directions o...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and fixing SS fly proof wire gauze to windows, clerestory windows and doors to exsisting aluminium frame. Stainless steel grade 304 wire gauze of 0.5 mm dia wire and 1.4 mm aperture on bot...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 12.60m to 15.60m Level

Providing and fixing of 2.5 track x 2 panel sliding windows made out of multi chambered uPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elas...

Above 3.60m to 6.60m Level

Providing and fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead ...

Above 3.60m to 6.60m Level

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

Above 6.60m to 9.60m Level

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing anodised aluminium grill anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 of approved design pattern, with approv...

Above 6.60m to 9.60m Level

Above 12.60m to 15.60m Level

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Above 3.60m to 6.60m Level

Providing and fixing stainless steel Grade 304 railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature wherever required and fittin...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Providing and fixing good quality Exterior grade High Pressure Laminate Fundermax Single sided Thermosetting synthetic resin bonded sheet Craft Paper Base of 6mm thick as per IS 2046 standard wit...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick Rcc stone walls and coloumns beams with necessary aluminium frame works at required level m...

Above 6.60m to 9.60m Level

Design supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 Part III . The Suspended System held with Spider Fittings of SS 316 Grade Steel...

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linearas well as curvilinear portions of the building by pr...

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix 1 3 1 cement 3 fine sand to Ceiling Concrete brick masonry including rounding off corners wherever required...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 4 1 cement 4 fine sand including rounding off corners wherever required smooth rendering, providing and removi...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1 5 1 cement 5 coarse sand and a top layer 6 mm thick cement plaster with cement mortar 1 3 1...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing 20 mm cement plaster with cement mortar 1 3 1 cement 3 coarse sand finished with a floating coat of neat cement to brick stone masonry including rounding off corners wherever required s...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 m...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 12.60m to 15.60m Level

Providing and laying machine cut and 30mm thick Sand Blasted Flamed Rajashree red Ilakal Pink approved Granite stone slab flooring in required design and patterns, in linear as well as curviline...

Above 6.60m to 9.60m Level

Providing and fixing Acid proof tiles flooring Endura Tiels using 600X600X20mm size tiles of reputed approved make, set in C.M. 1 3 with 4 to 5mm wide spacers including providing and filling approve...

Above 6.60m to 9.60m Level

Providing and fixing skirting with 12mm thk Acid Proof Coving tile of 300mm X 100mm X 50mm size fixing in c.m. 1 3, curing, with epoxy of matching shade with approved colour pigment, washing, neat fin...

Above 6.60m to 9.60m Level

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1 6, 20 mm thick, and joints finished with cement mortar 1 3 over existing cement con...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, Skirtings, ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 12.60m to 15.60m Level

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1 3 1 cement 3 coarse sand proportion cut to required shape, pattern with paper joi...

Providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08Percen and conforming to IS 15622, of approved make, ...

Above 3.60m to 6.60m Level

Providing and laying Vitrified tiles in different sizes thickness to be specified by the manufacturer , with water absorption less than 0.08Percen and conforming to IS 15622, of approved brand and m...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer , of 1st quality conforming to IS 15622, of approved make, in all colours, shades, e...

Above 3.60m to 6.60m Level

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle gre...

Above 3.60m to 6.60m Level

Grouting the joints of flooring tiles having joints of 5 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade 0.10 kg of hardener and 0.20 kg of resin per kg , includi...

Providing and injecting grout of Acrylic Polymer based into honey combs cracks for new RCC work damaged re work as per direction of Engineer in charge of work.

Providing and constructing un reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 M25 Gr...

Providing and constructing un reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 Grade , c...

Vaccum de watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator, HOM of machinery, Screed Vibratory, Power Floater, blade an...

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4 8 hours of casting of bay slab etc. complete in...

Providing to contraction joints polysuphide sealent Pouring grade confirming to BS 5212 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed dr...

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing a...

Providing and laying Cement concrete pavement with 1 2 4 for commercial and residential building floors, hardpaths, footpaths using 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal si...

Providing and laying 80mm thick factory made precast M 30 grade Cement Concrete Paver Block as per IRC SP 63 2018 and IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA and for Resident...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls at 1.25 ltr 10 m² over and including one coa...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Wall painting with premium acrylic emulsion paint of interior grade, having VOC Volatile Organic Compound content less than 50 g L of approved brand and manufacture, including applying additional ...

Finishing walls with 100Percen Premium acrylic emulsion paint having VOC less than 50 gm litre and UV resistance as per IS 15489 2004, Alkali and fungal resistance, dirt resistance exterior paint of ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Finishing walls with Premium Acrylic Smooth exterior paint of required shade Old work Two coats applied at 1.43 l 10 m² over existing cement paint surface including preparing the surface after ...

Above 3.60m to 6.60m Level

Finishing walls with textured exterior paint of required shade New work Two coats applied at 3.28 L 10 m² over and including priming coat of exterior primer applied at 2.20kg 10 m² to give an e...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr 10 m² over an under coat of primer applied at0.75 ltr 10 m² of approved brand and manufacture to ...

Above 3.60m to 6.60m Level

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new or old work after thoroughly brooming the surface to remove all dirt, dust, mortar drops ...

Above 3.60m to 6.60m Level

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr 10 m² over an under coat of primer applied at 0.80 ltr 10 m² of approved brand and manufactu...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 12.60m to 15.60m Level

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap fo...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and injecting chemical emulsion for Preconstructional Anti Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top...

Providing and laying integral cement based waterproofing treatment iincluding preparation of surface as requried for treatment of roofs, balconies, terrace etc., consisting of following application. ...

Above 3.60m to 6.60m Level

Above 6.60m to 9.60m Level

Above 9.60m to 12.60m Level

Above 12.60m to 15.60m Level

Providing and laying APP Atactic Polypropylene Polymer modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non woven polyester matt consisting of a c...

Providing and fixing 50X50X5mm S.S. Angles fixied on corners of exposed column including drilling holes in RCC with necessary machine screws etc as required

0.00m to 3.60m Level

Above 6.60m to 9.60m Level

Providing and fixing Steel work in built up tubular trusses round, square or rectangular hollow tubes etc. etc., including cutting, hoisting, fixing in position and applying a priming coat of appro...

Above 6.60m to 9.60m Level

Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer in charge 0.50 mm + 0.05 Percen total coated thickness with zinc coating ...

Providing, fabricating and fixing Profiled Poly Urethane insulated Roof PUF Sheet having modular density 40kg m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm stee...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +0.05 Percen total coated thickness, Zinc coating 120 grams per m2 as per IS 277, in 240 mpa steel grade, 5 7 micro...

Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I plain bitumen washer...

Providing and fixing Aluminium Turbo ventilator complete as per technical specifications Non Power Driven with 1.3mm thickness and 38 No.s of Vanes and turbine doom thickness 1mm and total weight no...

Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modi fied cementitious waterproofing membrane with minimum elongati...

Providing and laying cinder concrete in cement 1 15 1 cement 15 cinder of 12.5mm nominal gauge on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

Providing and laying 100mm thick pre cast cover slabs over Road side drains utility ducts Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe ...

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M 25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal and 9 nos ...

Supplying SandS RCC SPUN VIBRATED CAST PIPES REINFORCED pipes NP 3 Class conforming to IS 458 1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

do 300mm dia

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1 3 fixed and finsihed in line as per direction of Engineer in charge. The cost of ...

Providing and fixing C.I. frames with cover of approved Ist quality and make conforming to I.S.I. Specification and fixing in C.C. 1 2 4 7.5 cms thick including curing Rate includes cost of all mat...

Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt ...

Dismantling GS PPGI Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer in charge.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking to the approp...

Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in charge.

Demolishing brick block masonry work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per directi...

Demolishing stone rubble masonry SSM manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per directi...

Demolishing cement concrete manually by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer in charge.

Dismantling tile work in floors dadoing and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer in charge. For thickness of tiles...

Dismantling doors, windows and clerestory windows steel or wood aluminium shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per dir...

Dismantling weather proof course and removing and conveying the debris to a distance to the appropriate disposal area as per direction of Engineer in charge.

Disposal of building rubbish malba similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as...

B INTERIOR WORKS

Providing and Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and of...

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g m2 bo...

Manufacturing, supplying and fixing wooden Ward Robe of 0.60 m deep using 19 mm thick vinyl bonded water proof block board, shutters all round ward robe, lockable drawers with sliding channels, cupboa...

Providing and supplying Kitchen cabinet Shutter with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate 1.5mm thick and other side balancing lamination pre...

Supplying the furniture Dining Table composed of SS legs and corian top or similar as per selection, design, approved colour and make etc complete 1000mm dia

Supplying the furniture Single seating Dining chairs of SS Legs without arm handle with seat cusion for indoor outdoor seating as per selection, design, approved colour and make etc complete

Executive high back revolving chair with adjustable head rest Type I the seat and back shall be made out of good quality nylon mesh. The back shall have an adjustable lumbar support. The headrest s...

Supplying revolving type Working Office chairs, low back, with P.U. handrest

Visitor’s chair Type I of overall size seat 48cmW x 51cmD. Back 49cmW x 46cmH. The frame shall be made out of 1” dia single MS tube of 16G thick bent to ‘s’ shape for swinging effect. The f...

Providing and fixing Manager s Table consisting of 25 mm thick PLPB table topedge bounded, 25mm thick PLPB with edge bonded End table, 18mm thick PLPB with edge bonded Modesty, Wire manager ABS plas...

do Workstation Table 1200mm X 540mm X 750mm LxBxH

Storage Unit cum Side Table wooden One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY PLPB with edge bound for body, 18mm PLY PLPB with openable shutter...

do PLY STORAGE 1200mm X 430mm X 750mm LxBxH

Providingand fixing of Openable door Partition made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPV Thermo Plastic Vulcanized an...

C SANITARY PLUMBING WORKS

Providing and fixing white vitreous china pedestal type water closet European type with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P...

Providing and fixing 8 mm dia C.P. S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1 2 BSP thread and shapes, weighing not less than 60 g.

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Stainless Steel A ISI 304 18 8 kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making g...

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality and make and as per the direction of Engineer in charge

Providing and fixing CI PVC Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1 2 4 as per directions Rate is inclusive of cost of materials and fixtu...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931

Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931.

P F. UPVC or equivalant approved make Pipes Supreme or equivalent make with malleable G.I. R brand specials such as tee, bend, elbow, socket, reducing sockets, union, collers etc. as required inc...

Providing and fixing ball valve brass of approved quality, High or low pressure, with plastic floats complete a 25 mm nominal bore

Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

Providing and fixing Side operated Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements and all necessary accesori...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and fixing Sewer SWR pipes, including all fittings, This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per di...

b 110mm nominal dia pipes

c 150mm nominal dia pipes

d 200mm nominal dia pipes

KSRB13 8.6 Providing and fixing to wall, ceiling and floor, high density polyethylene pipes 6.00kgf sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall...

Supply and Installation of SS pipe 304L grade 100mm dia 114.3 mm OD and 2.11mm Thick mounted at ceiling level on wall Floor using S.S. hanger rods, clamps, fastners including drilling in RCC...

do SS pipe 304L grade 150mm dia 154.5 mm OD and 2.77mm Thick

Providing and fixing Stainless Steel Work For Drain Channel and Grating Cover using SS angles, sheets flats, plates, tubes etc work includes cutting, placing in position and welding wherever necessa...

Supply and Installation of Industrial Floor Trap AMUL TRAP 304 L Grade 300x300x300mm outlet 114 Dia OD 100mm Length inserted connected into Main Drain Line

Constructing brick masonry inspection chamber 455x610mm, and 450mm depth, clear inside dimension for single pipeline, using table moulded non modular bricks of class designation 50 in cement mortar ...

Construct Brick masonry in CM 1 4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1 3, 12mm thick, except for the conical surface outside where the plaster ...

Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.5 M depth and SFRC cover and frame

Providing and fixing high density polythylene water storage tank with cover, conforming to ISI 12701, colour of opaque white or as approved by Engineer in charge. The rate includes making ncessary h...

D ELECTRICAL WORKS

LT PANEL AND MCB DISTRIBUTION BOARDS Supply, installation, testing and commissioning of M.V. panels and switch gears suitable for 415V, 3 phase, 4 wire, 50Hz power distributio...

DISTRIBUTION BOARDS Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capaci...

4 Way TPN MCB DB

1 No. 25A 4P RCCB 100mA + 25A TPN MCB

12 nos. of 6 16A SP MCBs Read item as Set

8 Way SP MCB DB

1 No. 25A 2P RCCB 100mA + 32A DP MCB

4 nos. of 6 16A SP MCBs Read item as Set

12Way SP MCB DB

1 No. 25A 2P RCCB 100mA + 25A DP MCB

8 nos. of 6 16A SP MCBs Read item as Set

6 Way TPN MCB DB

1 No. 32A 4P RCCB 100mA + 32A TPN MCB

18 nos. of 6 16A SP MCBs Read item as Set

4 Way VTPN MCB DB

1 No. 40A TPN MCB

4 nos. of 25A TP MCBs Read item as Set

4 Way TPN MCB DB

1 No. 32A 4P RCCB 300mA + 32A TPN MCB

Supplying and fixing of following rating, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.6A, SP MCB

Supply, installation, testing and commissioning of metal enclosure. The enclosure. shall be wall mounted using necessary brackets and fixing accessories. SP enclosure

LT CABLE AND TERMINATIONS Supply and Laying of 1100V grade, XLPE PVC insulated, PVC sheathed, Aluminium copper conductor, steel armoured cables. The cable shall be laid in exsiting trench, ca...

4C x 10Sq.mm Al cable

3.5C x 70Sqmm Al. cable

3C 2.5Sqmm Cu arm. Cable

3C 6 sqmm Al. XLPE Cable

CABLE END TERMINATIONS Supply and providing end termination for below listed PVC insulated, PVC sheathed, aluminium conductor,steel armoured, 1100V grade , cable using brass cable glands and alumini...

4C x 10Sq.mm Al cable

3.5C x 70Sqmm Al. cable

3C 2.5Sqmm Cu arm. Cable

3C 6 sqmm Al. XLPE Cable

Supply, transportation and installation of following sizes of Hot Dipped Galvanized Iron ladder type cable trays with rungs at span of 250 mm including horizontal and vertical bends, reducers tees, cr...

200 mm x 50 mm x 2 mm

100 mm x 50 mm x 2 mm

Supply and fixing of conduit structural steel support ceiling suspended type wall bracket type clamps with necessary saddles for fixing of conduits cables, cable trays and where ever necessar...

Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication and Signalling lines having flexibility and anti termite, anti corrosive, good abrasion, fatigue strength and U...

110 mm Outer dia

Earth work excavation for pipelines cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution light...

Sand Filling in Wells Cable Trenches complete as per Drawing and Technical Specifications.

Supply and laying of brick protection for under ground cables laid in existing trench.

WIRING SYSTEM Supplying and wiring adopting loop system in suitable size PVC Conduit casing capping casing capping using2x1.5Sqmm Phase and Neutral and1x1.0sqmm Earthwire FRLS multistrand PVC in...

Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Two in a row above 3 mts upto 6 mtrs from tapping point to outlet via switch box

Three in a row above 6 mts upto10 mtrs from tapping point to outlet via switch box

Ceiling fan point controlled by 6A modular type switch and fan regulator. Medium point above 3 mtrs upto 6 mtrs.

Long point above 6 mtrs upto 10 mtrs.

Exhaust fan point Single phase controlled by 6A modular type switch and 6A socket outlet near the exhaust fan Medium point above 3 mtrs upto 6 mtrs.

Supply and Wiring for Lights using 2.5 sqmm flexible copper, 1100 volts grade PVC insulated wires drawn through 2mm thick, suitable size PVC conduit in concealed manner using necessary conduit acces...

7 light point controlled by 1no. 6A SP MCB 35 mts

8 light point controlled by 1no. 6A SP MCB 40 mts

CIRCUIT MAIN POWER MAIN SUBMAINS Supplying and wiring for lighting circuit mains power mains submains, using one of FRLS PVC insulated 1100V grade, multistrand Copper conductor single core ...

2 x 2.5 Sqmm + 1 x 1.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

2 x 4 Sqmm + 1 x 2.5 Sq mm PVC Insulated wires drawn in 20 mm dia PVC conduit

2 x 6 Sqmm + 1 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

4 x 6 Sqmm + 2 x 4 Sq mm PVC Insulated wires drawn in 32 mm dia PVC conduit.

4 x 10Sqmm + 2 x 6 Sq mm PVC Insulated wires drawn in 40 mm dia PVC conduit.

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall. Group ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch Socket stepped electronic fan regulator dimmer telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way. Gro...

6Amps 3way socket.

16Amps one way switch

6 16Amps universal socket

Stepped Fan Regulator.

Supply and fixing of surface mounted 1 ph 3 ph combination 3 5 pin industrial type socket housed in IP 66 67 enclosure. The rate shall include providing of plug top. 16A, 2P+E, 3 phase socket wi...

SUPPLY and INSTALLATION OF LIGHT and FAN FIXTURES Supply of round square recess surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with whi...

LED square or round down light 10 12W

LED square or round down light 15 18W

Supplying of .feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70Percen lumen maintenance with CRI 80. Power Input 220 240Vat...

LED light fitting 1 x 4 20 22 W

LED light fitting 1 x 4 36 40 W

Supplying of 10W, LED, bulk head light fixture of type LBHE 10 CDL of CG make equivalent.

Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degre...

Supplying of 70W, LED, High efficeincy round high bay in PDC housing industiral light fixture of type TIP 311 70 57 SL CP NSG of CG make equivalent.

Supplying of 100W, LED, High efficeincy round high bay in PDC housing industiral light fixture of type LHB11 100 CDL 60 HPM of CG make equivalent.

Fixing all types and all capacities fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076” twin twisted PVC insulated...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, and 50 cycles. Single phase AC supply conforming to IS 374 1979 and with double...

Fixing a ceiling fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of 23 0.0076 i...

Supplying exhaust fan of 1440 RPM of 300mm 12 size with bracket blades complete for light duty suitable for operate on 230V 50Hz, AC Supply.

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire of approved make.

Supplying of 1440rpm 15 Sweep 450 mm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.

Supply and fixing of heavy duty oscillation type propeller fan available with impeller consisting of 3 blades in bracket type, column wall mounted, 450mm sweep, 1 Phase, of Havells make equivalen...

TELEPHONE SYSTEM Supplying and fixing of modular switch Socket telephone socket etc., on existing modular switch plate as per IS 3854 and IS 1293. Telephone socket

Supplying and drawing PVC flexible 2 pair telephone unarmoured tinned copper cable.

Supplying and Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste etc., and runnin...

Supplying and installing of multicore 0.61mm, copper conductor, PVC insulated, PVC sheathed, armoured telephone cable laid drawn through,existing conduit with all necessary accessories as required. 10...

Supplying and fixing of MDF krone juntion box with KRONE module Telephone cable termination. 10pair Supplying and Fixing

DATA SYSTEM Supplying and Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste et...

25mm dia PVC Conduit Supplying and laying

Supplying and fixing of modular Socket on existing modular switch plate as per IS 3854 and IS 1293. RJ45 I.O outlet

Supplying and drawing UTP CAT 6E LAN cable

Supply, installation , testing and commissioning of managed L2 12 port POE switch of 10 100 1000 Mbps with 2 Gig SFP. and power budget of min. 180W. The switch shall be mounted on existing rack....

Supply, installation , testing and commissioning of managed L2 24 port POE switch of 10 100 1000 Mbps with 2 Gig SFP. and power budget of min. 360W. The switch shall be mounted on existing rack....

Supply and fixing of patch panel with CAT 6 I O mounted on existing rack with all necessary fixing accessories. The rate shall also include providing end termination. 24 port 10 100 1000 patch pane...

Supply, installation , testing and commissioning of SFP Transceiver 1000BASE LR SINGLE MODE LC GBIC

Supply and fixing of …mtrs cat 6 patch cable 1 mtr

Supply and fixing of …mtrs cat 6 patch cable 2 mtr

OS2 SC LC single mode duplex fiber optic Patch Cord 3Mtrs

Supply and installation of rack mount LIU loaded with couplers and all necessary accessories. 6 fibre SC style single mode Fiber Panel loaded with Splice Tray, Adapters and Pigtails 1U

Supply, laying and testing of Optical fiber cable, the rate shall include the cost of joint enclosure and splicing of Optical Fiber cables. 6 Core single mode OS2 corrugated steel tape armoured loo...

Supply and fixing of switch wall mounting closed rack with power manager and cable manager 15U with 450mm depth with all necrssary accessories as required.

Supply and fixing of switch wall mounting closed rack with power manager and cable manager 9U with 450mm depth with all necrssary accessories as required.

IP CCTV SYSTEM Supplying and Laying of 2mm thick, heavy guage PVC conduit pipe in the concealed slab groove cutting with suitable size bends, collars, clamps, metal junction boxes adhesive paste...

25mm dia PVC Conduit Supplying and laying

Supplying, drawing and connecting of 1 pair E Cat 6 cable in 25mm dia PVC conduit with all other accessories.

Supply and fixing of …mtrs cat 6 patch cable 1 mtr

MISCELLANEOUS WORKS Supply and laying of 2 mm thick, PVC conduit with all conduit accessories etc., as required. The rate shall include chasing of walls floors and plastering the chased portion as...

25mm dia PVC Conduit

32mm dia PVC Conduit

Fixing of first Aid box containing medicines for 50 persons to give first aid treatment.

Supply and fixing in position approved shock treatment chart written in English, Hindi and local language. The chart shall be framed in teakwood frame and covered with glass.

EARTHING SYSTEM Supplying, fixing and wiring earth electrode for grounding of Lifts, Transformers, DG sets etc., Using 40 mm dia 2.9mm thick 2.5mtrs long GI pipe with GI funnel with mesh and suitab...

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required 25x3mm GI strip

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required 8 SWG, GI Wire

Supply erection, testing, commissioning of TR Invertor type split Airconditioners suitable for operation on A C supply single phase 50Hz 230V with hermetically sealed inverter compressor with air ...

EXTERNAL LIGHTING Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening...

9 meters Top 70mm and bottom 155mm dia

Fabrication, Supplying, Erection, Testing and Commissioning of ……Mtrs long polygon high mast with Single Multiple telescopic sections having, minimum overlap distance of 1.5 times of top secti...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Fixing halogen metal LED flood light fitting over existing pole including clamps, bolts, nuts, and wiring using suitable capacity wires.