Construction of residential quarter for Civil Judge Sr Div S D J M at Link Road Goal Ghar Port Blai Sw Providing IEI and EEI including power back upr

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

d) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and laying of DWC HDPE pipe of size 40/32, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II complets with fitting and cutting, jointing etc. direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 3 x 1.5 sq. mm

a) 3 x 4 sq. mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

a) 1 Pair

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

a) 1 or 2 Module (75mmX75mm)

b) 6 Module (200mmX75mm)

Supplying and fixing 9 modules GI box along with modular base and cover plate(white) with frame ( Make: Legrand, Model: Mylinc or equivalent) for modular switches in recess etc. as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 A switch

b) 15/16 A switch

d) 3 pin 5/6 A socket outlet

e) 6 pin 15/16 A socket outlet

f) Telephone socket outlet

g) TV antenna socket outlet

h) Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing one module stepped type electronic fan regulator on the existing switch box i/c connection etc as required (Make: Anchor, Code No.14501or eqt.).

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying of 9W, B22 LED lamp (CDL/WW) on the existing batten holder. (Make: Havells / Phillips / Bajaj etc.).

Supplying of RYB indicator LED bulb set with each bulb of 0.5W

Supplying of 12 watts WW, surface mounted LED downlight/Panel Light ( Make: Luker, Model: Elegent Surface Panel or equivalent).

Supplying of 18 watts WW, surface LED downlight/Panel Light ( Make: Luker, Model: Elegent Surface Panel or equivalent).nt).

Supplying of 15 watts WW, recessed mounted LED downlight / Panel Light (Make: Luker, Model: Eegent Slim Panel or equivalent).

Supplying of 5W outdoor Wall Light, WW (Make: Luker, Code: LODSR515 or equivalent).

Supplying of 3W Outdoor Footlight, WW (Make: Luker, Code: LODFTG3 or equivalent).

Supplying of 3W Indoor Footlight, WW (Make: Luker, Code: LODPTW3 or equivalent).

Supplying of 10 W LED Bulk Head, WW (Make:- Luker, Code: LWSQB 10 or equivalent).

Supplying of 2', 10W LED Batten (Integrated), NW/WW ( Make: Bajaj, Type : BCLSB 10 NW or equivalent).

Supplying of 1', 5W LED Batten (Integrated), NW/WW ( Make: Bajaj, Model No. : BCLSB 05 NW or equivalent).

Installation ,Testing, Commissioning of all LED wall bracket /ceiling fittings of all sizes and shapes , complete with all accessories including connections etc. as required.

Supplying and fixing Electronic Door Bell suitable for single phase, 230 V (Make: Philips, Model: Smart Harmony, Model No.: 913713825601 or equivalent ).

Supplying and fixing bell push - 6A- SP- 1 way-2 module (Make: Legrand, Model: Arteor, Cat. No.: 5734 59 or equivalent) in a 2 module, IP 55 Plexo Box (Make: Legrand, Model: Arteor, Cat. No.: 0696 80 or equivalent) including cost of materials, labour, connection etc. as required.

Supplying of LED box type batten suitable for single TLED lamp ( Make:- Philips, Type: TMC 501 P 1xT- LED 22W P3241 or equivalent) with a 20 watt LED T8 tubelamp (Make: Philips, Model : 20W 865 T8 IND or equivalent) complete with all accessories etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of Premium Decorative ceiling fan of 1200mm sweep of approved colour and make, suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including 300 mm long down rod etc.as required (Make: Bajaj, Model: Regal Gold NXG 1200 mm. Duck White CF or equivalent).

Supplying of ceiling fan of 1200mm sweep of approved colour and make, suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including 300 mm long down rod etc.as required (Make: Bajaj, Model: New Bahar Deco 1200 mm. White CF or equivalent).

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of exhaust fan of 300mm sweep (Metallic ) (Make: Havells, Model-Ventil Air- DSP or equivalent).

Supplying of exhaust fan of 250 mm. sweep (Non Metallic) (Make: Havells, Model-Ventil Air- DX White or equivalent).

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

a) Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

a) 6 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 6 way (4 + 18), Double door

a) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying, installation, testing and commissioning of Instantaneous Electric Water Heater of capacity 3Ltr./3KW (Make:- Havells, Model: Instanio, Product Code: .GHWAIAPWB003 or equivalent complete with all accessories etc. as required.

Supplying of pedestal fan of 400mm sweep (High Speed) with lownoise (Make: Havells, Model: Accelero HS Pedestal or equivalent).

Supplying and fixing 4 way Switch Board (Gang Box) (Make: Press Fit, Code No.: 563101 or equivalent) on the surface.

Supplying and fixing 2 way- 16A Switch Board (Gang Box) (Make: Press Fit, Code No.: 563161 or equivalent) on the surface.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

a) 5/6 amps switch

b) 15/16 amps switch

c) 3 pin 5/6 A socket outlet

b) 6 pin 15/16 A socket outlet

Providing and fixing 100A capacity , 415 Vac, 50 Hz,TP&N Switch Fuse Unit with Rewirable Porcelein Fuse Units, ISI marked (Make: Havells, Cat. No.: IHBRTE4100 or equivalent) including drilling holes , making connections, etc. as required..

Providing and fixing 100A, 8 way , copper Busbar Chamber (Make: Havells, Cat. No.: IHBC010008 or equivalent) including drilling holes , making connections, etc. as required.

Supplying and fixing 6A- one way- SP-1 module Bell Indicator with register ( Make: Legrand, Model : Mylinc, Cat. No. 6755 07 or equivalent ) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing buzzer ( Make: Legrand, Model : Mylinc, Cat. No. 6755 40 or equivalent ) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying of 25 sq.mm., 3.5 core PVC insulated XLPE insulated armoured, LT power cable of 1.1kV grade with aluminium conductor(Make: Havells or equivalent).

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

a) Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC pipe as required.

a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

a) Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying, installation, testing and commisioning of 2 KVA , 24 V UPS with Sine Wave technology ( Make: Luminous, Model: Power X 2250 or equivalent) with 02 Nos..12V, 180 AH tubular battery (Make: Luminous, Model : Inverlast ILTT 24060 or equivalent) and suitable trolley to accommodate two tubular batteries ( Make: Luminous, Model : TX200L or equivalent) including providing connections, cost of materials, labour, T&P etc. as required.

JAY ENGINEERING

NAVJEEVAN ENTERPRISES

DAYAL HALDER

M/s Sameer Decorative Corner

RAVI RAJ ELECTRICALS

POWER ENGINEERING CO

M/s G K Construction