SPECIAL REPAIR TO BLDG NO P-17 AT BSO WEST AND PROVN OF SERVANT QTR DEFI FOR BLDG NO P-3/2 AT NYAY MARG ROAD, NEW CANTT PRAYAGRAJ

Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc and removing debris from MOD land complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface complete all as specified and directed

M&L for Rendering 10mm thick in cement plaster 1:3 on ceilings fair faces of brick work or concrete surfaces finshed even complete all as specified and directed

M&L for preparation of newly plastered surfaces of celing and applying two coats of oil emulsion distemper complete all as specified and directed

M&L for preparation of newaly plaster surface of wall and applying two coats of oil bound distemper on 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on 3 mm thk wall putty complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of cement based paint including preparation complete all as specified and directed

Dismantling of floor hearth or wall tling including cement mortar bedding, removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified light shade floor tiles (scratch free Double charge GVT) 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for Glossy ceramic coloured elevation wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed

M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed

Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc at any height of any size. complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) for plinth protection etc complete all as specified and directed

Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.

Dismantaling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.

M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed.

Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

M&L for cement concrete tiles 30cmx30cmx20mm thick machine pressed set jointed and pointed in neat cement slurry in floors and cut polished over roof treatment, laid over and including 15mm thick screed be din cement mortar (1:6) mixed with and including polymer based liquied water proofing additive @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) or as per manufacturers specification and joints of cement concrete tiles shall be filled with cement mortar (1:4) mix with and including 5% curde oil complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F for ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection 450 mm long, 15 mm size with brass chromium plated nuts complete all as specified and directed

Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed

S&F for outer dia of 16mm 3 layer PP-R polypropylene random copolymer concealed pipes SDR-7.4 (PN16)UV stablized and antimicrobial fusion welded having thermal stablity foe hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings and cutting chasing wherever reqd fixed complete to wall ceiling or in floor etc.

Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc) including cleaning complete all as specified and as directed

S&F for outer dia of 25mm 3 layer PP-R polypropylene random copolymer concealed pipes SDR-7.4 (PN16)UV stablized and antimicrobial fusion welded having thermal stablity foe hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings and cutting chasing wherever reqd fixed complete to wall ceiling or in floor etc

S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc complete all as specified and directed

S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified.

S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

Dismantling asbestos cement/galvalume sheet (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

M&L for TMT bars 8 mm dia , cut to length, bent to shape required, including crancking, bending spirally for hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.

M&L for 150mm dia Reinforced concrete pipes, Class NP-2 laid in trenches and jointed with collars complete all as specified & as directed.

Dismantling unframed timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and directed.

S&F for Fe 410-W (Gde-250 quality A Rolled sections as in main and cross beams hip and rafters, purlins where connected to common rafters and running rails & bars fixed with angle cleats or other connecting plates and similar work etc complete all as specified and directed.

M&L for 12mm thick POP decorative ceiling with GI wire mesh of 25mm size of galvanised steel wire 1.4mm dia fixed with tinned tacks of wire staples including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nlon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc. 1.2m length) of 0.55 thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and connected items and scaffolding etc complete all as specified and directed.

S&F in repair 4 mm thick non asbestos fiber cement building board of 600x600 mm in size (HPSC E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and as directed.

S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600x 600mm size and 0.30 mm thick (MS galvanized (PPP CGS)) with main tee, cross tee and wall angle grid hanging with 2mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed.

Supply only WPC. (Integral Water Proofing Compound) complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains pipe 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

S&F for 30mm thick factory made wire mesh solid WPC door shutter consisting of density 650kg/cum manufacturedby an ISO-9001-2015 certified company,doorto be panelles with SS mosquito Mesh and XTN alumnum mesh foe additional strength and safety purpose conforming to IS 4020.THe door should be water proof, termite proof ,fire retardant and having screw holding capacity.door to be fixed to frameincluding 3 NosM.S powder coated butt hingessize 100mmx25mmx2mmand 32mm long screws drilled suitably to pass through both wallsof MS tube other hardware should be fixed with 19x6mm sizesteel scrtews complete all as specified and directed

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges shall be paid separately)

S&F for providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and S.S wire mesh but includes all other connected accessories. Note:- (i) Net Opening will be measured lor payment purpose. complete as per manufacturer's specification and directed.

S&F for including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming toFe 290 Gde-E-165 complete all as specified and directed

S&F in repair 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed

M&L for 12mm thick tuffenned glass door with suitable lockig arrangement with lock 6 lever and self closing hinges with rebate including joint cleats of suitable section for fixing builder hardware as directed and with 2nos of suitable decoratave 450mm long stainless steel handle on both side of door complete all as specified and directed

S&F for Stainless steel wire cloth, 0.36mm nominal dia of

wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F for 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F for 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F for 300 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as spesified and directed .

S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed .

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete.

S&F in repar for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as spesified and directed .

S&F for 100 mm hasp & staple sfety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F for 100mm size stainless steel handle cast type polished bright complete all as specified and directed.

S&F for magnetic catches with steel body ‘H’ type fixed to shutter complete all as specified and directed

S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet includsive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F for 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed and drawing.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Preparation of old surface of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

M&L for applying a 1mm thick coat of wall care putty over a surface of wall /ceiling etc complete all as specified and directed

M&L for complete removal of existing surface including Cleaning the existing surfcae from dust /dirt , moulds, fungas and any other foreign materials and applying two of oil bound distemper complete all as specified and directed

M&L for completely removal of old treatment of wall and applying finishing walls with two coats of Premium Acrylic Smooth exterior paint on 3 mm thk wall putty complete all as specified and directed.

S&F in Repair for SS towel rack 600 mm long without lower hangers but with 3 hooks complete all as specified and directed. Make: Jaquor Cat part ACN-CHR-1181FHS or equivalent in cera , hindware, or prayag as per approved make list.

S&F in Repair for corner glass self (with bracket) complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1173 or equivalent as per approved make list.

S&F in Repair for vitreous china wash and basin thin rim table top basin of size 415x415x145mm shape round complete all as specified and directed. Make :Jaquor Cat part OPS-WHT-15905 or equivalent in cera , hindware,or prayag as per approved make list.

S&F in Repair for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-705L130 or equivalent in cera , hindware or prayag as per approved make list.

S&F in Repair for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent as per approved make list.

S&F in Repair for single lever tall boy with 150 mm extension body fixed spout without popup waste system with 600mm long braided hoses complete all as specified and directed.Make :Jaquor Cat part OPP-CHR-15005BPM or equivalent in cera, hindware or prayag or equivalent as per approved make list.

S&F in Repair for angular stop cock with wall flange complete all as specified and directed.Make :Jaquor Cat part OPP-CHR-15053PM or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

S&F in repair for soap dispenser with glass bottle complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1135N or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

S&F in repair for swivel mirror complete all as specified and directed. Make :Jaquor Cat part ACN-CHR-1195N or equivalent in cera, hindware, or prayag or equivalent as per approved make list.

S&F in repair for towel ring complete all as specified and directed.Make :Jaquor Cat part ACN-CHR-1195N or equivalent in cera , hindware, or prayag or equivalent as per approved make list.

S&F in repair vitreous China white wash down water closet pan 250x585x415mm wall hung including fixing bolts,UF soft close seat cover, hinging device complete all as specified and directed.Make : Jaquor cat part OPS-WHT-15951UF or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

S&F in repair for single piece slim concealed cistern with floor mounting frame installation kit and S-type drain pipe conection set for wall hung WC (including flush control plate complete all as specified and directed.Make : Jaquor cat part JCS-WHT-2400FS or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

Supply and fixing in repair vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed . including plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device

S&F in repairs PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repairs vitreous China Urinal, Half stall type, white (excluding flushing cistern) including 32mm dia CP coupling urinal Spreder with cp pipe up to angle cock,waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

S&F in repair for two way bib cock with wall flange complete all as specified and directed.Make : Jaquor cat part KUP-CHR-35041PM or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

S&F in Repair for bib cock with wall flange complete all as specified and directed. Make : Jaquor cat part ALI 85037 or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.

M&L RCC type B-0 1:2:4 using 12.5mm graded stone aggregate as in kitchen shelves etc including demolation of old slab complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves etc complete all as specified and directed.

Use and waste form work to rough finished surface of sides and soffits of floor or roof beams, beam hunchigs, girders, bressullers, lintels, cantilevers, shelves including supports over hankes, etc of plinth/roof beam and similar works vertical or better for fair finished surfaces of concrete etc complete all as specified and directed.

M&L for Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding la

yer in CM (1:6) complete all as specified and directed.

M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

M&L for vitrified pavement outdoor tiles of 300mm X 300mm X 9-10mm thick coloured for floor /pavement etc and jointed in solvent and pointed in coloured cement to match the tiles including 15mm thick screed bed or bedding layer ie. cement mortar (1:6) complete all as specified and as directed. (Make: Somany (Durastone)/Kajaria (Duratech)/Johnson (Endura).

M&L for 80mm thick coloured inter locking paver block with grey cement and pigment of any type and shape the minium compressive strength not less than M-40Grade as approved complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for 25 mm Sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for 75 mm thick type D-2 1:4:8 (using 20mm graded stone agg) as in sub base complete all as specified and directed.

Per Point

Excavating in trenches soft/loose soil n. exc 1.5m wide and exc 1.5m in depth but n.exc 3 meter ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5m but n.exc 3m in depth and getting out complete all as specified and directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

M&L for concrete bed (40mm graded stone agg) to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using complete all as specified and directed.

M&L for salt-glazed stoneware drain pipe grade 'A' 150mm bore, ISI marked, jointe with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

M&L for cutting into existing manholes of internal dia 100mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paintr complete all as specified and directed.

S&F in repair 3mm thick (ACP) Aluminium composite panel letter size 200mmx25x25mm with inside LED lights (Vita 25mm aluminium foil with PVDF coating) in English. and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect complete all as specified and directed. Note: Qupted rate includes cost of scaffolding if requires

S&F for 3mm thick Aluminium composite panel cladding using aluminium composite panel sheet 3mm thick (Vita 25mm aluminium foil with PVDF coating) at ht of 4-5 mtr (ACP will be fixed over MS Tube pipe not less than 25mmx25mm and 1.6 mm thickness welded over MS steel framed works) and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect complete all as specified and directed. Note: Qupted rate includes cost of scaffolding if requires

S&F in repair for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

Description same all as per Item No 113 here in above but fixing only complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for 18 to 20 mm thick Granite work (table rubbed and polished) in cooking platforms and similar works in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 in repairs complete all as specified.

M&L for providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n. exc 1.5 m in depth and getting out complete all as specified and directed

M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate, as in foundation filing, sub base of floor complete all as specified and as directed

Each Set

M&L for flat formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

M&L for formwork to sides of rough finished surface of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M&L for M-25 RCC Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for M-25 RCC Columns, pillars, piers, posts and struts complete all as specified and directed

S&F for 0.50 thick (including coated thickness) pre-colour, pre-profiled corrugated (Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.

M&L for M-25 RCC Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for M-25 Reinforced cement concrete (designmix) in chajja complete all as specified and directed

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:6 CM complete all as specified and directed

M&L for moudular brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 CM complete all as specified and directed

M&L for damp proof course in cement concrete (1:2:4) to type B0 25 mm thick to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for ATT treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed

M&L for Mild steel TMT bars 8 mm to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for 25 mm thick plain cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in levelling course of floor and other similar works complete all as specified and directed.

M&L for Hardcore of gauge 50mm thick with brocken stone n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for laying of 75mm thick cement concrete typeD-2, 1:4:8 (40mm graded aggregate) for subbase complete all as specified and directed

M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying two coats of of 100% Premium acrylic emuls

ion paint having VOC less than 50 gm/litre and UV resistance as per IS 5489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including one coat of 1mm birla wall care putty complete all as specified and directed.

M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm,in floor ,wall etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

S&F for hollow MS steel double / single rebated door frame 125x60mm or any other similar works of approved shape and size inculding necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

M&L for 40 mm thick flush shutter,solid core construction with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 53,934.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum

S&F in repair 18mm thick 100%solid PVC prelamiated kitchen cabinet box and shutter, wardrobe of required size comprisig of viorgig PVC resin of K valve 57-60 (suspension Grade), calcium carbonateand natiral fibres and non toxic additives, made from extrusion processhaving minum density not less than 650kg/cbm having good screw holding capacity (screw withdrawwal strength of 2000 N (face) & 1100 N (edge) minimun compressive of 50 N/mm2 ,Modulus of elasticity 850 N/mm2 and reistance of spread of fame of class A category with proper of being termite /Borer free, water/ Moisture proof and fire Retardant WPC to be laminated with PVC foil of minimun 14 Microns thick of approved desing pasted on both face of shutter complete all as specified and directed Note:- (quoted rate inclusive of auto closing stainless steel hinges of requisite no per box)

S&F for 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staples complete all as specified and directed.

M&L for factory made uPVC white color sliding window/ ventilators casement /openable/sliding type made of extruded profiles with wall, thickness of profiles not less than 2.3mm with hollow section with multi chamber. Frame (88mm x 52mm), sash (42mm x 67mm) interlock (One vertical length in each shutters 45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2mm +/- 0.2 mm thick galvanised steel frame (30mm x 18mm) of 2 Nos, sliding sash (30mm x18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners hardware touch lock of zinc alloyed (white powder coated) steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories and 5.0 mm thick coloured glass pans complete all as specified and directed.

Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.

M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,flush pipe,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair for hand shower (health faucet) with 8mm dia 1.2 m long flexible tube and wall hook complete all as specified and directed.Make : Jaquor cat part ALD-CHR-573 or equivalent in cera , hindware,or prayag or equivalent as per approved make list.

S&F for in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.

S&F for 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F for 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.

S&F in repair CP angle stop cock/valve of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed.

S&F in repair 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S&F in repair 15 mm bore CP fancy stop valve (concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.

S&F in repair for 90 to 125 mm size fancy type chromium plated shower rose with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-705L130 or equivalent as per approved make list.

S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed.

S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trences complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

Removing surplus excavated soil/earth to a distance not exc.50M and deposited where directed at a level not exc.1.5 M above the starting point complete all as specified and directed.

M&L for flat formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

M&L for PCC type C-2,

1:3:6 (40mm graded aggregate) as in foundation filling and mass complete all as specified and directed.

M&L for fly ash bricks,with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered /stopped ends etc complete all as specified and directed.

Add for additional 25mm inner girth over or under 30 cm all as specified

M& L for rendering 15 mm thick in cement mortar (1:4) on brick surface and finising plastered surface with using extra cement, complete all as specified and directed.

Surface dressing n.exc (not exceeding) 15 cm deep in soft loose soil including removal of soil complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate ) as in floor finished even and fair without using etra cement complete all as specified and directed.

M&L for Forming Construction joints 30mm deep x 10mm wide, filled with sealing compound of grade -A complete all as specified and directed.

M&L for Forming Contraction (dummy) joints 100mm deep x 10mm wide, filled with sealing compound of grade -A complete all as specified and directed.

M&L for rendering 15mm thick in cement plaster 1:6 on other than fair face of brickwork complete and finished even and fair without using extra cement complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate)as in manhole cover set in CM (1:4) including necessary form work complete all as specified and as directed.

Per 100 RM

Manhole Each pipe

S&F for factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for Drilling/cutting and tapping cast iron/DI/GI water mains (in position) for branch connections of the internal dia complete all as specified and directed.

Supply and fixing gun metal globe or gate valve with iron wheel head,screwed both ends for iron pipe or for unions and fixed of dia 25mm complete all as specified and directed.

S&F for tubes medium grade of bore size 25 mm including all fixing accessories and laid in floor complete all as specified and directed by Engr-in- Charge

Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed

Description same all as per item No. 194 here-in- above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed

Description same all as per item No. 194 here-in- before but for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed

Description same all as per item No. 194 here - in - before but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed

S&F for modular switch 1 way, 6 amps, 230V AC, one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module complete all as specified & directed.

S&F for modular switch flush type 16 amps, 230V AC single pole one way complete all as specified & directed.

S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F for ceiling rose surface backelite three terminals complete all as specified and directed

S&F in repalacement of modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified & directed.

S&F in repalacement of call bell Dingdong type AC 230 Volts single pole complete all as specified and directed

S&F for modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection complete complete all as specified & directed.

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture 20W, 120 lumen per watt 4' long batten with extruded polycarbonate,

environmental friendly, energy efficient ready to use pack with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps complete all as specified and directed.

Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

Supply and fixing and replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S&F for wall building security light luminaire for 1x35 w LED with deep drawn housing complete with and including cable for connection from ceiling rose with 3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one complete all as specified and directed

Supply and fixing for ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and if required down rod as per site requirement and dismantling old ceiling fan deposited at MES store yard complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 sweep with, blades, and frame and louvers including antidust painting complete including cutting holes on wall, making good and finishing of disturbed surfaces matching with the exisitng surfaces, necessary fixing arrangements such as fastener bolts, nuts, washers etc; of appropriate size complete all as specified and directed

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 8 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates including 4 pole MCCB 200 Amp 25 KA - 01 fixed type Nos and SP MCB 40 to 63 Amps 'C' curve 10 KA - 12 Nos outgoings asper site requirement outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. NOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity complete all as specified and directed

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class (IP-43), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar ,TP&N 4ways 415 volts complete all as specified and directed Note: MCB/ shall be measured and paid seperatly under respective item of this schedule

S&F in replacment of factory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-43), suitable for mounting MCBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar, SP&N 8 ways ,220 volts complete all as specified and directed Note: MCB/ shall be measured and paid seperatly under respective item of this schedule

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of Triple poles and neutral current carrying capacity 100 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed.

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing in replacment of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

M&L in replacment of two single core (submain) FRLS PVC insulated cable of 4.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 4.00 sqmm nomianal dia as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm, 3.5 core complete all as specified and directed Note: 1. Excavation and earth work will be measured and paid seperately.

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

M&L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

M&L for energy saver LED battan fitting 20 watt,120 Lumen /watt, 230 Volts, single tube mounting including with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection two core copper cable from ceiling rose to led light fitting complete all as specified and directed. Make Philips/Wipro/ Havells or equivalent as approved by GE