Certain repair to plumbing, joinery and connected works at AFMSD Kandivali, HBTC Marve and Malad under AGE B/R Malad

Amount

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in 1/2 brick thick walls, built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls including ceilings etc., including racking out joints, hacking for key scrubbing down with water and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 10 mm thick in cement mortar 1:4 on internal wall surfaces including dubbing out plaster average 10mm thick in CM 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on concrete / brick masonry surfaces including dubbing out plaster in CM 1:6 of average 10mm th and finished even and smooth without using extra cement but using water proofing compound complete all as specified and as directed by Engineer-in-Charge. Note: water proofing compound shall be measure seprately

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of wall surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Material and labour for preparation of new plastered wall surfaces and applying two coats of Acrylic weather proof coat 100% exterior grade paint over acrylic primer over a thin layer of wall care putty complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Berger paints / Shalimar Paints

M&L two coats of Cement base paint over a coat of cement primer including preparation of new plastered wall surfaces. etc complete all as specified and directed.

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc complete all as specified and as directed by Engineer-in-Charge

Taking down shutter carefully, area not exceeding 1.0 sqm and refixing in the same opening after rectify the defect each including all fittings etc complete all as specified and as directed by Engineer-in-Charge

Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm and refixing In the same opening after rectify the defect each including all fittings etc complete all as specified and as directed by Engineer-in-Charge

Resecuring or easing and adjusting without taking down shutters of any description not exceeding 1 sqm each including all fittings etc complete all as specified amd as directed by Engineer-in-charge.

Resecuring or easing and adjusting without taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each including all fittings etc complete all as specified amd as directed by Engineer-in-charge.

Welding in repairs exc 2.5cm but not exc 5cm thick of metal not exc 6cm etc complete all as specified as directed

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exceeding 1.5 sqm each including fittings complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick factory made 2nd class hard sal wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side all as specified and as directed. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 178 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows & other frames/chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with properrty of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for seprately. Make: Rajashri/Giza/Echon/Floresta

Factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows & other frames/chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(face) and 1100 N(edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with properrty of being termite/borer proof water/moisture proof and fire resistant and fixed in position with MS hold fast/lugs/ SS dash fastners of required dia and length complete all as specified as directed by Engineer-in-charge. Note: M/S hold fast or SS dash fastners shall be paid for seprately. Make: Rajashri/Giza/Echon/Floresta

Providing and fixing Factory made single extruded WPC (wood polymer composite) soild decorative type flush door shutter of size 30mm thick comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) and having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(face) and 900 N(edge), minimum compressive strength of 50 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with properrty of being termite/borer proof water/moisture proof and fire resistant WPC to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk ss screws complete all as specified as directed by Engineer-in-charge. Note: SS butt hinges and SS screws shall be paid seprately. Make: Rajashri/Giza/Echon/Floresta

Providing and fixing Factory made single extruded WPC (wood polymer composite) soild decorative type flush door shutter of size 35mm thick comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) and having minimum density of 650 kg/cum, screw withdrawal strength of 1800 N(face) and 900 N(edge), minimum compressive strength of 50 N/mm2, modules of elasticity 900 n/mm2 and resisitance to spread of flame of class A catgory with properrty of being termite/borer proof water/moisture proof and fire resistant WPC to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk ss screws complete all as specified as directed by Engineer-in-charge. Note: SS butt hinges and SS screws shall be paid seprately. Make: Rajashri/Giza/Echon/Floresta

Provide 30mm thick "FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER" decorative type consisting of density 600 kg/cum manufactured by an ISO 9001-2015 certified company, door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and saftey purpose (confirming as per IS 4020) the door should be water proof, termite proof, fire resistant and having screw holding capacity door to be fixed with 3 nos. MS powder coated butt hinges size 100x2x32mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 19x6mm size steel screws etc. complete as per direction of Engineer-in-charge, manufactures specification and drawing. Make: Rajashri/Giza/Echon/Floresta

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge.

Supply and fix factory pressed steel frames made out of mild steel black sheet 1.25mm thick of profile 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including shop coat of primer and threshold of 12mm dia round bar 1 No welded at bottom of frame etc., complete all as specified and as directed Make:M/s Madhu Industries, Jangid Engineering Jaipur, Decan Structural Pvt Ltd Bangaluru, Chandni Industries, Ashwani & Sons, Anoop Industries,Trisul Industries, Ashish Industries

Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete 1:3:6, type C1, (using 20mm graded stone aggregates), exceeding 10 cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Material and labour for preparing old wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Supply and fix 15 micron coloured aluminium sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of size 7 x 4.5mm thick, fixed with channel of size 38mm x 12mm x 1.3mm, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILL of Associated group or equivalent make as approved by GE

Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing),depositing debris out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

All as per item no.52 described here-in-before but in skirting/dado including 10mm thick cement mortar 1:4 backing coat etc complete as specified and as directed by Engineer-in-charge.

S&F for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick / 450mm x 350mm x 7mm, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed and removing debris out outside md land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20-25 mm thick machine cut cudappa stone slab in jambs / cills / soffits of window / ventilator as in frame work to support for aluminium section, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over backing coat 10 mm thick in CM (1:4)complete all as specified and as directed by Engineer-in-Charge.

Material and labour marble work 20 mm thick makrana colour /white marble machine cut on kitchen cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with marble shade of makrana white over 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed

Supply and fix in repair, health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook, including making connection and fixed in position all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces using cement mortar (1:3)complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces using cement mortar (1:3)complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces using cement mortar (1:3)complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix in repairs, concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repair Swivel Shower of PTMT, 125mm, any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)

supply and fix in repairs brass cp mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specfied and direted. Make: Jaquar, Marc,CERA,Kohler, Player, Soma, Leade Zoloto Jaquar & Co Pvt Ltd (JAQUAR)

Supply and fix in repairs, UPVC Nahani trap,75 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repairs UPVC floor trap 75mm with grating including jointing with waste pipe Complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme

Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant/Parryware/Prayag

supply and fix in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including necessary fittings such as 40mm coupling waste pipe etc all complete all as specified as directed. Make : Diamond / Nirali / Neelkant/Parryware/Prayag

Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs overhead shower rose brass chromium plated 125 mm dia, heavy duty pattern with swivel joints, suitable for jointing to 15 mm bore steel water tubing or union complete all as specified and as directed by Engineer-in-Charge. Make :Soma / Leader / Zoloto / Jaquar

Supply and fix in repairs soap dish Soap dish, stainless steel, approximate size 160 x 160 x 90mm fixed to plugs with chromium plated brass screws all as specified and as directed.

Supply and fix in repair, corner glass shelf 300mm Cat No- BEA-44 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repair, glass shelf 300mm (with ABS Brackets) Cat No- BEA-49 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repair Peg set 6 Cat No- BEA-30 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repair, CP brass towel Rack Cat No- BA-52 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repair, CP brass soap Dish Cat No- BA-15 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repair, CP brass towel Ring Cat No- BA-21 all as specified and as directed by Engineer-in-Charge. Make-Prayag or equivalent as approved by GE

Supply and fix in repairs 25mm dia stainless steel curtain rail fixing with including provision of pair of brackets, stops, rollers etc complete all as specified and as directed.

Supply and fix in repairs brass chromium plated towel rail, 20mm dia, D type, 60cm long, between flanges complete all as specified and as directed by Engineer-in-Charge. Make : Crown / Jindal / Essess / Swastik

Supply and fix stainless steel kitchen plate rack made out 1mm thick of size 600mmx900mmx200mm including fixing with plug and screw complete complete all as specified and as directed by Engineer-in -charge. Make: Blue star cat part no. kpr-313/ kpr-314 or equivalent Nirali or Parryware

Supply and fix in repairs gun metal globe/ gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union, nipple and reducer complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Supply and fix in repairs gun metal globe /gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union, nipple and reducer complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 48,270.00 (Minus) as listed in Schedule of Credit. Tenderer's will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

M/S Kumar Enterprises