ADDN/ALTN TO EXISTING PARKING SHED AND GROUND FLOOR OF SPDC 17 AND SPECIAL REPAIR TO REPLACEMENT OF OLD RUSTED PIPE LINES AT MO (MB) GHATKOPAR

Amount

M&Lfor Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ Dense soil complete all as specified and directed.

M&Lfor Plain Cement Concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete specified and directed.

M&Lfor RCC1:2:4 (20 mm graded aggregate) as foundation, footing, plinth beam and base of column etc complete all as specified and directed.

M & L for RCC 1:2:4( using 20mm grade aggregate) cement concrete for columns, all as specified and directed by Engr-in-charge

M&Lfor Form work to side of concrete as in foundation,footing base of column and plinth beam rough finished of surfaces complete all as specified and directed.

M & L for formwork to sides of pillars, columnsin rough finished surfaces of concrete is square or rectangular shape, all as dircted by Engr-in-charge.

M & L for TMT steel bars 10 mm dia and over, cut to n length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or escuring with clips quality confirming to complete all as specified and directed.

All as per item No 7 but upto 10 mm dia in stirrups , spaces and binders all as specified by Engr-in-charge

M & L precast cement concrete block 1:3:6 type C1 ( 20 mm graded aggregate) masonry with solid blocks ,exc 10 cm in width and setting in mortar CM 1:4, all as directed by Engr-in-Charge

M&L for rendering 15mm in two coats (10mm+5mm) on fair faces of brick work or concrete surfaces in CM (1:4) with integral water proofing compound finished even and fair without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid seperatly.)

M &L for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6, including finishing with 3 mm wall care putty, even& smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall sufaces or ceiling and applying 2 coats of oil bound distember over a coat of primer incl wall care putty etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces on walls, chajjas,filling of hair line cracks with white cement and applying two coats of 100% anti fungal weather resistant acrylic paint over a coat of acrylic primer in approved shade and as per manufacturer's instructions including necessary scaffolding complete all as specified and as directed.

M & L for Hardcore of broken stone or boulders of gauge n. exc 63 mm , deposited, spread and levelled in layers n. exc 15 cm thick , watered and rammed to a true surfacecomplete all as specified and directed..

M&L 100 mm thick cement concrete type B-2, 1:2:4 (40mm graded stone aggregate) as in as in flooring/path/Pavement complete all as spd and directed.

M&L for 100 mm thick Provding PCC 1:4:8 Type D2 40mm greded aggregate) as in sub base etc completeall as specified and directed.

Returning filling in including spreading watering and well ramming in layer n.exc 15cm thick complete all as specified and directed.

Removal of surplus soil not exceeding 50 mtr from staring point and depositing to a point including spreading watering and well ramming in layer n.exc 15cm thick as directed.

M & L for 20 to 25mm machine cut, kota stone slab, for flooring over 20mm thick in CM 1:6 cement screed bed baselaid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as spd.

S&F aluminium section in doors/windows/ventilators ,any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed (Make : JINDAL/HINDALCO) Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet glass pane,wire mesh and rubber beading or gasket will be measured separately.

M&L PCC 1:3:6 C-2 (using 20mm graded crushed stone aggregate) as in plinth protection, sub base of floor ( 75mm thick ) finished even and fair complete all as specified and directed.

M &L for 20 mm thick green marble (table rubbed, and polished) in steps, jambs, pillars, windows-cill, cooking platform , jambs, urinal partition,wash basin platform and like in cement mortar 1:4 including pointing in white / coloured cement 1:2 using marble dust with admixture of pigment to match including one side full round edging including backing coat of 10 mm thick in CM 1:3 etc complete all as specified and directed.

M & L for Providing chemical emulsion for Anti Termite Treatment Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed.

M & L for Providing chemical emulsion for Anti Termite Treatment Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed.

M& L for 60mm thick Machine pressed precast paver block M-40 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (LAQUER FINISH) and including dismantling of paver blocks etc complete all as specified and as directed Note: sand cushion will be measured separetely

Supply only sand cusion for paver blocks complete all as specified and directed.

S&F aluminum anodised grill DG- 202 ( 10 mm x 5.2mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

Supply only aluminium wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

Supply only for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations with aluminium frame cuboard shutter work complete all as specified and directed.

S & F MS steel work in tubular/roof trusses (framed),purlines,rafters,brackets,wind tiles including distance pieces clates,crane gantries, rails and fastenings and heavy bracket framing, etc (beam,tee,angle,channel or flat sections and circular sections in columns) etc., complete including nessary cutting, welding,fabrication and eraction Machine hydraulic bending , confirming toFe 410 - W (Gde E-250) quality-A. complete, complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10 cm in which or girth, not otherwise descrided two coats of synthetic enamel paint over coat of zinc chromium paint complete all as specified and directed.

S&F for Pre- Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping ,drilling of screws/suitable length GI 'J' or 'L' hooks in roof complete all as specified and directed.

M&L for precast Reinforced Cement Concrete 1:2:4(Nominal mix) using 20m m graded stone aggregate as in slab supported on walls, beams and columns in floors complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for exposing getting out GI/CI pipes in soft/loose soil all as specified and as directed.

M&L for drilling and taping cast iron water mains (in position) for branch connection of the internal dia 25 mm complete all as specified and directed

Supply and fixing in trenches/floor/surface for suction pipe jointing GI tubing medium grade including all fittings such as bends elbows tees union short pieces connectors check nuts caps plugs etc for 80 MM Bore complete all as specified and directed. Note : Excavation and earth work will be measured and paid seperately under relevent items.

All as per item No.38 above but 50 mm bore complete all as specified and directed.

All as per item No.38 above but40 mm bore complete all as specified and directed.

All as per item No.38 above but 25 mm bore complete all as specified and directed.

supply and fixing jointing and commissioning ISI marked IS NO:83292000 centrifugally cast ductile iron pipe (DI Pipe) of nominal diameter (DN) 150 mm class K-9 with internal cement mortor lining and external bitumen coating socketed and spigot including Supply and fixing ISI marked push-on-Joint (Rubber ring) of EPDM material confirming to MS 672:1992 suitable for DI pipe of 150 mm dia pipe complete all as specified and directed.

supply and fixing jointing and commissioning ISI marked IS NO:83292000 centrifugally cast ductile iron pipe (DI Pipe) of nominal diameter (DN) 100 mm class K-9 with internal cement mortor lining and external bitumen coating socketed and spigot comlete including Supply and fixing ISI marked push-on-Joint (Rubber ring) of EPDM material confirming to MS 672:1992 suitable for DI pipe of 100 mm dia pipe complete all as specified and directed.

Supply and fixing and jointing ductile iron fittings (DI Specials) such as bends,colars,tail piece, upto 200 mm dia pipe complete all as specified and directed.

Supply and fix in repair sluice valve of size 150 mm long type with cast iron body bonnet wedge stuffing box gland thrust plate hand wheel of grey cast iron spindle of stainless steel nut body seal ring and wedge facing ring lead tin, bronze bolt nut of high carbon steel bounate gasket of compressed fibre glands packing of jute having flanged & drill type nominal pressure rating, PN 1.6 i.e 10 kgs/Sqcm unit conforming to IS -14846-2000 including material & labour for jointing flanged joint with rubber fibre jointing ring bolt nut & washer etc including necessary earth work complete all as specified and directed.

All as per item No.45 above here in before but of size 100 mm complete all as specified and directed.

All as per item No 45 above here in before but of size 80 mm complete all as specified and directed.

Material and labour for construction of valve chamber of size 900 x 900 mm x 900mm (internal diamensions built in brick masonary on 15 cm thick PCC foundaton (1 : 4 : 8) type D-2 using 40 mm graded stone aggregate over 100 mm thck hard cor with brick work masonary in cement mortar 1:4 using 'B' class bricks and rendering in cement mortar 1: 4, 10 mm thck internally including exposed surfaces of external surfaces, MS cover made out of 3 mm thick MS sheet on angle iron framework made out of 40 x 40 x 3 mm duly embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate with hold fast made out of MS flat iron 25 x 6 mm x 300 mm long and 40 mm thck PCC coping 40 mm thick 1:2:4 type B-0 using 12.5 mm graded stone aggregate with handle hinges with locking arrangement & applying two coats of synthetic enamel paint over a coat of red oxide primer to all exposed steel surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for construction of valve chamber of size 500 x 400 mm x 600 mm(internal diamensions built in brick masonary on 15 cm thick PCC foundaton (1 : 4 : 8) type D-2 using 40 mm graded stone aggregate over 100 mm thck hard cor with brick work masonary in cement mortar 1:4 using 'B' class bricks and rendering in cement mortar 1: 4, 10 mm thck internally including exposed surfaces of external surfaces, MS cover made out of 3 mm thick MS sheet on angle iron framework made out of 40 x 40 x 3 mm duly embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate with hold fast made out of MS flat iron 25 x 6 mm x 300 mm long and 40 mm thck PCC coping 40 mm thick 1:2:4 type B-0 using 12.5 mm graded stone aggregate with handle hinges with locking arrangement & applying two coats of synthetic enamel paint over a coat of red oxide primer to all exposed steel surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for construction of valve chamber of size 600 x 600 mm x 600 mm(internal diamensions built in brick masonary on 15 cm thick PCC foundaton (1 : 4 : 8) type D-2 using 40 mm graded stone aggregate over 100 mm thck hard cor with brick work masonary in cement mortar 1:4 using 'B' class bricks and rendering in cement mortar 1: 4, 10 mm thck internally including exposed surfaces of external surfaces, MS cover made out of 3 mm thick MS sheet on angle iron framework made out of 40 x 40 x 3 mm duly embedded in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate with hold fast made out of MS flat iron 25 x 6 mm x 300 mm long and 40 mm thck PCC coping 40 mm thick 1:2:4 type B-0 using 12.5 mm graded stone aggregate with handle hinges with locking arrangement & applying two coats of synthetic enamel paint over a coat of red oxide primer to all exposed steel surfaces complete all as specified and directed by Engineer-in-Charge.

S&F gun metal gate valve ISI marked 25 mm bore iron wheel head screwed at both ends for iron pipes of ferrule and provision of necessary fittings like union, check nuts, etc and addition/alteration required for fixing complete all as specified and directed.

S&F gun metal gate valve ISI marked 40 mm bore iron wheel head screwed at both ends for iron pipes of ferrule and provision of necessary fittings like union, check nuts, etc and addition/alteration required for fixing complete all as specified and directed.

Supply and fixing self closing taps of cast iron or malleable cast iron, galvanised, screwed for iron pipe complete all as specified of size 25 mm dia complete all as specifid and directed.

S&F gun metal gate valve ISI marked 50 mm bore iron wheel head screwed at both ends for iron pipes of ferrule and provision of necessary fittings like union, check nuts, etc and addition/alteration required for fixing complete all as specified and directed.

M & L for point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed. Note: Modular flush box and inner/outer plates measured and paid separately.

All as per item No. 55 above but for One 2pin/3 pin socket outlet 5 Amps on independent board.

All as per item No. 55 above but for One 2pin/3 pin socket outlet 5 Amps on same board with other switches , complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH with and in and including PVC concealed conduit having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, Half-Yellow, Earth- Green)(Make of copper wire:Legrand/Polycab/Havells and PVC conduit Make: Precision,Plaza) Note: Modular flush box and inner/outer plates measured and paid separately.

M&L for ceiling rose three terminals AC 240 volts 50Hz complete all as specified and directed.

Supply and fixing modular ceiling fan regulator 120 watt 2 module complete all as specified and directed.

M&L for switch modular one way 6/5 amps 1 module complete all as specified and directed.

M&L for switch modular one way 16/20 amps 1 module complete all as specified and directed.

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed.

M&L for socket modular 16/20 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 8 way double door with din rail and 200 Amp bus bar complete all as specified and directed.

Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and directed.

Supply and fixing modular metal flush box 6 module complete all as specified and directed.

Supply and fixing modular metal flush box 8 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 3 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 6 module complete all as specified and directed.

Supply and fixing modular white cover plate with frame 8 module complete all as specified and directed.

Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,power factor >0.9,having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed.

Supply and fixing ceiling fan complete with blades, down rods and accessories, 230 volt, 1400mm sweep with Min Air delivery 245 CFM and service value 6.0 with all accessories complete all as specified and directed.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 10 Sqmm, 2 core complete all as specified and directed.

Supply and laying HDPE pipes of pressure rating 6 kgf/cm2 (PE-63 grade) of size 32 mm bore laid in trenches for passing of cable complete all as specified and directed.

Supply and fix in repairs highly efficient high power 35 W LED street light fitting with pressure die cast aluminium housing reflector and enclosed with heat resistant toughened glass IP66 protection AC 240 Volts 50 HZ refractive lens with suitable electronic drive PF > 0.9 complete including taking exiting unserviceable street light fitting complete all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 56970.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

R J ENTERPRISES

S K ENTERPRISES

ORIENT ELECTRIC CO

PANKAJ AND BROTHERS

M/s Qureshi Construction Co

Chaudhary Enterprises

Mayur Enterprises