Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.1 Cr
EMD Value
₹7.1 L
Closing Date
4 Aug 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Re-development of Multipurpose Hall at Jawahar Navodaya Vidyalaya, Dhenkanal, Odisha
NBCC/ODISHA/ZO/NIT/23-24/004
NBCC/ODISHA/ZO/NIT/23-24/004
Open Tender-Domestic
Civil Works General
Dhenkanal, Odisha
₹11,800
₹7.1 L
4 Aug 2023
13 Jul 2023
4 Aug 2023
4 Aug 2023
11 Aug 2023
NAME OF WORK :- Re-development of MP Hall Works at JNV, DHENKANAL (ODISHA)
BOQ OF CIVIL WORK
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
A SUB-HEAD-1 EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m
in width or 10 sqm on plan), including dressing of sides and ramming
of bottoms, lift upto 1.5 m, including getting out the excavated soil
and disposal of surplus excavated soil as directed, within a lead of 50
All kinds of soil. CUM 1023.72 302.23 309399.80
Extra for every additional lift of 1.5 m or part thereof in excavation
/banking excavated or stacked materials. All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in
depth,consolidating each deposited layer by ramming and watering,
lead upto 50 m and lift upto 1.5 m.
Supplying and filling in plinth with sand under floors, including
watering, ramming,consolidating and dressing complete.
Excavating, supplying and filling of local earth (including royalty) by
mechanical transport upto a lead of 5km also including ramming and
watering of the earth in layers not exceeding 20 cm in trenches,
plinth, sides of foundation etc. complete.
B SUB HEAD-II -CONCREATE WORK
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work up to plinth
6 level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from CUM 207.18 6374.96 1320764.21
natural sources : 8 graded stone aggregate 40 mm
nominal size derived from natural sources)
Providing and laying damp-proof course 40mm thick with cement
concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from
natural sources : 4 graded stone aggregate 12.5mm nominal size
derived from natural sources)
Extra for providing and mixing water proofing material in cement
8 concrete work in doses by weight of cement as per manufacturer's 19.00 60.21 1143.99
Providing & applying a coat of residual petroleum bitumen of grade of
VG-10 of approved quality using 1.7kg per square metre on damp
proof course after cleaning the surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1
cement : 3 coarse sand (zone-III) derived from natural sources : 6
10 aggregate 20 mm nominal size derived from natural sources) over SQM 140.29 718.19 100755.23
75mm thick bed of dry brick ballast 40 mm nominal size, well rammed
and consolidated and grouted with fine sand,including necessary
excavation,levelling & dressing & finishing the top smooth.
Brick edging in full brick width and half brick depth including
excavation, refilling and disposal of surplus earth lead upto 50 metres.
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
C SUB HEAD-III-REINFORCED CEMENT CONCRETTE
Centering and shuttering including strutting, propping etc. and
removal of form for all heights :
(a) Foundations, footings, bases of columns, etc. for mass concrete. SQM 187.53 324.46 60845.98
Walls (any thickness) including attached pilasters, butteresses,
plinth and string courses etc.
(c) Suspended floors, roofs, landings, balconies and access platform. SQM 1064.36 807.64 859619.71
(d) Lintels, beams, plinth beams, girders, bressumers RM 1735.48 640.96 1112373.26
(e) Columns,Pillars, Piers, Abutments, Posts and Struts. SQM 963.02 847.36 816024.63
(f) Edges of slabs and breaks in floors and walls Under 20 cm wide. SQM 291.40 191.65 55846.81
Extra for additional height in centering, shuttering where ever required
with adequate bracing, propping etc., including cost of de-shuttering
and decentering at all levels, over a height of 3.5 m, for every
13 additional height of 1 metre or part thereof (Plan area to be SQM 734.70 336.36 247123.69
Suspended floors, roofs, landing, beams and balconies (Plan area to be
Steel reinforcement for R.C.C. work including straightening, cutting,
14 bending, placing in position and binding all complete upto plinth level. QTL. 294.19 9445.52 2778777.53
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Steel reinforcement for R.C.C. work including straightening, cutting,
15 bending, placing in position and binding all complete above plinth QTL. 517.64 9445.52 4889356.63
level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
Add for plaster drip course/ groove in plastered surface or moulding to
R.C.C. projections.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and laying in position ready mixed or site batched design mix
cement concrete for reinforced cement concrete work; using coarse
aggregate and fine aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in
recommended proportions as per IS: 9103 to accelerate / retard
setting of concrete, to improve durability and workability without
impairing strength; including pumping of concrete to site of laying,
curing, carriage for all leads; but excluding the cost of centering,
shuttering, finishing and reinforcement as per direction of the engineer-
in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement
content in design mix shall be payable separately. In case the cement
content in design mix is more than 110% of the specified minimum
cement content, the contractor shall have discretion to either re-
or bear the cost of extra cement.
(I) All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum
(i) R.C.C. work in Footing CUM 96.69 9149.25 884640.98
(ii) R.C.C. work in Beam CUM 52.61 9149.25 481342.04
Concrete of M30 grade with minimum cement content of 350 kg /cum
(iii) R.C.C. work in Columns CUM 40.79 9298.39 379281.33
(II) All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum
(i) R.C.C. work in Lintel CUM 5.49 10858.61 59613.77
(ii) R.C.C. work in Beam CUM 113.75 10858.61 1235166.89
(iv) R.C.C. work in Slab CUM 151.59 10858.61 1646043.66
(v) R.C.C. work in walls CUM 9.57 10858.61 103916.90
Concrete of M30 grade with minimum cement content of 350 kg /cum
(iii) R.C.C. work in Columns CUM 54.32 11039.36 599658.04
D Masonry Work
Half brick masonry with common burnt clay F.P.S. (non modular)
18 bricks of class designation 7.5 in superstructure above plinth level up Sqm 235.44 1072.62 252537.65
to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at
every third course of half brick masonry.
Brick work with non modular fly ash bricks conforming to IS:12894,
class designation 10 average compressive strength in superstructure
above plinth level up to floor V level in : Cement mortar 1:6 (1
cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of
designation 7.5 in foundation and plinth in:
Cement mortar 1:6 (1 cement : 6 coarse sand)
Random rubble masonry with hard stone in foundation and plinth
including levelling up with cement concrete 1:6:12 (1 cement : 6
coarse sand : 12 graded stone aggregate 20 mm nominal size) upto
plinth level with :
Cement mortar 1:6 (1 cement : 6 coarse sand) CUM 61.08 7010.07 428175.08
E SUB HEAD-IV-CLADDING WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished,
premoulded and prepolished, machine cut for kitchen platforms, vanity
counters, window sills , facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with
white cement, mixed with matching pigment, epoxy touch ups,
including rubbing, curing, moulding and polishing to edges to give high
gloss finish etc. complete at all levels.
22 Area of slab upto 0.50 sqm SQM 1.10 4930.16 5423.18
23 Area of slab over 0.50 sqm SQM 30.86 4662.55 143886.29
Providing edge moulding to 18mm thick marble stone counters,
24 Vanities etc. including machine polishing to edge to give high gloss
finish etc. complete as per design approved by Engineer-in-Charge.
Granite work RM 114.90 441.30 50705.37
Extra for fixing marble /granite stone over and above corresponding
25 basic item, in facia and drops of width upto 150 mm with epoxy resin RM 114.90 501.04 57569.50
based adhesive including cleaning etc. complete.
Extra for providing opening of required size & shape for wash basins/
kitchen sink in kitchen platform, vanity counters and similar location in
26 marble/Granite/stone work including necessary holes for pillar taps EACH 8.00 851.47 6811.76
etc. including moulding, rubbing and polishing of cut edges etc.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS: 15622 (thickness to be specified by the manufacturer), of
approved make, in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-Charge, in skirting, risers
27 of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 SQM 339.13 1120.45 379978.21
cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg
per sqm, including pointing in white cement mixed with pigment of
matching shade complete.
(Size-300x450 )
F SUB HEAD-V-WOOD & PVC WORK
Providing and fixing panelling or panelling and glazing in panelled or
panelled and glazed shutters for doors, windows and clerestory
windows (Area of opening for panel inserts excluding portion inside
grooves or rebates to be measured). Panelling for panelled or panelled
and glazed shutters 25 mm to 40 mm thick :
Float glass panes
5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). SQM 34.50 2350.79 81102.26
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames
of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15
mm to receive shutter of 30 mm thickness. The laminate shall be
moulded with fire resistant grade unsaturated polyester resin and
28 chopped mat. Door frame laminate shall be 2mm thick and shall be RM 73.13 740.26 54135.21
filled with suitable wooden block in all the three legs. The frame shall
be covered with fiber glass from all sides. M.S. stay shall be provided
at the bottom to steady
Providing and fixing to existing door frames.
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door
shutter in different plain and wood finish made with fire
retardant grade unsaturated polyester resin, moulded to 3
mm thick FRP laminate all around, with suitable wooden
blocks inside at required places for fixing of fittings and
polyurethane foam (PUF)/Polystyrene foam to be used as
filler material throughout the hollow panel, casted
monolithically with testing parameters of F.R.P. laminate
conforming to table - 3 of IS: 14856, complete as per direction
of Engineer-in-charge.
Providing and fixing factory made uPVC white colour casement/
Casement cum fixed glazed door comprising of uPVC multi-chambered
frame, sash and mullion (where ever required) extruded profiles duly
reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size
according to uPVC profile), uPVC extruded glazing beads of
appropriate dimension, EPDM
gasket, zinc alloy (white powder coated) 3D hinges and one handle on
each side of panels along with zinc plated mild steel multi point
lockinghaving transmission gear, cylinder with keeps and one side key,
G.I fasteners 100 x 8 mm size for fixing frame to finished wall and
necessary stainless steel screws, etc. Profile of frame & sash shall be
mitred cut and fusion welded at all corners, mullion (if required) shall
be also fusion welded including drilling of holes for fixing hardware's
and drainage of
water etc. After fixing frame the gap between frame and adjacent
finished wall shall be filled with weather proof silicon sealent over
backer rod of required size and of approved quality, all complete as
per approved drawing & direction of Engineer-in-Charge. (Single /
double glass panes and silicon sealent shall be paid separately).
Casement door with top hung ventilator with 3D and S.S.
friction hinges (400 x 19 x 1.9 mm) made of (big series)
frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80
mm all having wall thickness of 2.3 ±. 0.2 mm and
single glazing bead / double glazing bead of appropriate
dimension.(Area of door upto 2.50 sqm)
Providing and fixing fire resistant door frame of section 50 x 60 mm on
horizontal side & 35 x 60 mm on vertical sides having built in rebate
made out of 1.6 mm thick GI sheet ( Zinc coating not less than
120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door
Shutters. The frame shall be filled with Mineral wool Insulation having
density min 96Kg/m³ . The frame will have a provision of G.I. Anchor
31 fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size RM 56.80 1887.05 107184.44
M10 x 80 ) suitable for fixing in the opening along with Factory made
Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of
fire rated glazed shutter . The frame shall be finished with a approved
fire resistant primer or Powder coating of not less than 30 micron in
desired shade as per the directions of Engineer - in- charge . (Cost of
SS ball bearing hinges is excluded).
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and fixing 60 mm thick glazed fire resistant door shutters of
120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-
tested and certified as per laboratory approved by Engineer-in-charge,
with suitable mounting on door frame, consisting of vertical styles, top
rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x
32 60mm made out of 1.6mm thick G.I. sheet (zinc coating not less SQM 40.80 10257.90 418522.32
than120gm/m²) duly filled mineral wool insulation having density min
96 kg/m³ and fixing with necessary stainless steel ball bearing hinges
of size100x89x3mm of approved make, including applying a coat of
approved fire resistant primer or powder coating not less than 30
micron etc all complete as per direction of Engineer-in-charge
(panelling to be paid for seperately).
Providing and fixing glazing in fire resistant door shutters, fixed panels
& partitions etc., with G.I. beading made out of 1.6 mm thick G.I.
sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm
screwed with M4 x 38 mm SS screws at distance 75 mm from the
edges and150 mm c/c , including applying a coat of approved fire
resistant primer/powder coating of not less than 30 micron on G.I.
beading, & special ceramic tape of 5 x 20 mm size etc complete in all
respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction
of Engineer-incharge with glass of required thickness having 120
minutes of fire resistance both integrity & radiation control (EW120)
and minimum 20minutes of insulation (EI20). The manufacturer have
to give test report/certification of fire glass and the glass should have
the stamp showing the value of E, EW & EI. The glass shall be tested
in approved NABL accredited lab or by any other accreditation
body which operates in accordance with ISO/IEC 17011 and accredits
labs as per ISO/IEC 17025 for testing and calibration scopes shall be
eligible. The maximum glazing size shall not be
more than 1100x2200 mm (w x h) or 2.42 sqm.
Providing and fixing bright /matt finished Stainless Steel handles of
34 approved quality & make with necessary screws etc all complete. (a) NOS 26.00 105.83 2751.58
Providing & fixing Stainless steel sliding door bolts ISI marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade with nuts and screws
etc complete. (a) 250mm x 16mm .
Providing and fixing stainless steel towerbolts (barrel type) with
necessary screws etc. complete.
Filling the gap in between aluminium frame & adjacent RCC/ Brick/
Stone work by providing weather silicon sealant over backer rod of
37 approved quality as per architectural drawings and direction of RM 328.72 89.82 29525.63
Engineer-in-charge complete.
Upto 5mm depth and 5 mm width
G SUB HEAD-VI-STEEL WORK
Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved
38 steel primer using structural steel etc. as required. In gratings, KG 559.13 149.93 83829.61
frames, guard bar, ladder, railings, brackets,
gates and similar works
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing,
polishing and making curvature (wherever required) and fitting the
same with necessary stainless steel nuts and bolts complete, i/c fixing
the railing with necessary accessories & stainless steel dash fasteners ,
stainless steel bolts etc., of required size, on the top of the floor or the
side of waist slab with suitable arrangement as per approval of
Engineer-in-charge.
Chequerred precast cement concrete tiles 22 mm thick in footpath &
courtyard, jointed with neat cement slurry mixed with pigment to
match the shade of tiles, including rubbing and cleaning etc. complete,
on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
Medium shade pigment using 50% white cement 50%
Marble stone flooring with 18 mm thick marble stone, as per sample
of marble approved by Engineer-in-charge, over 20 mm (average)
thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and
jointed with grey cement slurry, including rubbing and polishing
complete with :
41 Raj Nagar plain SQM 24.56 2099.51 51563.97
Kota stone slab flooring over 20 mm (average) thick base laid over
and jointed with grey cement slurry mixed with pigment to match the
shade of the slab, including rubbing and polishing complete with base
of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3
43 coarse sand) and jointed with grey cement slurry mixed with pigment SQM 122.80 2147.82 263752.30
to match the shade of the slabs, including rubbing and polishing
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and laying rectified Glazed Ceramic floor tiles of size
mm or more (thickness to be specified by the manufacturer), of 1st
quality conforming to IS : 15622, of approved make, in all colours,
shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm
thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with
grey cement slurry @ 3.3 kg/ sqm including pointing the joints with
white cement and matching pigments etc., complete.
Providing and laying vitrified floor tiles in different sizes (thickness to
be specified by the manufacturer) with water absorption less than
0.08% and conforming to IS: 15622, of approved make, in all colours
45 and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 SQM 168.13 1492.58 250947.48
coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including
grouting the joints with white cement and matching pigments etc.,
complete. (a) Size of Tile 600x600 mm
Providing and laying Vitrified tiles in floor in different sizes
(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS:15622, of
approved brand & manufacturer, in all colours and shade, laid
on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)
jointing with grey cement slurry @3.3 kg/sqm including grouting
the joints with white cement and matching pigments etc. The
tiles must be cut with the zero chipping diamond cutter only .
Laying of tiles will be done with the notch trowel, plier, wedge,
clips of required thickness, leveling system and rubber mallet for
placing the tiles gently and easily.
Double charge vitrified tile polished finish of size
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by manufacturer), with water absorption less than 0.08 %
and onforming to I.S. 15622, of approved make, in all colours &
46 shade, in skirting, riser of steps, over 12 mm thick bed of cement SQM 16.61 1545.10 25664.11
mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement
slurry @ 3.3kg/sqm including grouting the joint with white cement &
matching pigments etc. complete. Size of Tile 600x600 mm
Providing and laying flamed finish Granite stone flooring in required
design and patterns, in linear as well as curvilinear portions of the
building all complete as per the architectural drawings with 18 mm
thick stone slab over 20 mm (average) thick base of cement mortar
1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and
47 pointing with white cement slurry admixed with pigment of matching SQM 42.12 2728.72 114933.69
shade including rubbing, curing and polishing etc. all complete as
specified and as
directed by the Engineer-in-Charge :Flamed finish granite stone slab
Jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 mm thick stone
slab over 20 mm (average) thick base of cement mortar 1:4 (1
cement : 4 coarse sand) laid and jointed with cement slurry and
48 pointing with white cement slurry admixed with pigment of matching SQM 70.27 4118.31 289393.64
shade including rubbing, curing and polishing etc. all complete as
specified and as
directed by the Engineer-in-Charge.
Polished Granite stone slab colour of Black, Cherry/Ruby Red or
Providing and laying C.C. pavement of mix M-25 with ready mixed
concrete from batching plant. The ready mixed concrete shall be laid
and finished with screed board vibrator , vacuum dewatering process
and finally finished by floating, brooming with wire brush etc. complete
49 as per specifications and directions of Engineer-incharge. CUM 42.18 8721.23 367848.40
(The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum.
Excess/less cement used as per design mix is payable/ recoverable
Extra for providing and mixing hardening compound of approved
quality as per manufacturer's specification in cement concrete.
Providing and filling in position rubberized bitumen hot sealing
compound for sealing of expansion joints in roads / pavements all
complete as per direction of the Engineer-in-Charge.
Using grade 'A' sealing compound conforming to IS: 1834
Providing and laying Floor hardener compound over finished vdf
flooring as per directions of engineer in charge.
SUB HEAD-VII- ROOFING
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and fixing false ceiling at all height including providing and
fixing of frame work made of special sections, power pressed from
M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both
side inclusive) as per IS : 277 and consisting of angle cleats of size
25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at
1200 mm centre to centre, one flange fixed to the ceiling with dash
fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange
of cleat fixed to the angle hangers of 25x10x0.50 mm of required
length with nuts & bolts of required size and other end of angle
hanger fixed with intermediate G.I. channels 45x15x0.9 mm running
at the spacing of 1200 mm centre to centre, to which the ceiling
section 0.5 mm thick bottom wedge of 80 mm with tapered flanges
of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intermediate channel
with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
wire at every junction, including fixing perimeter channels 0.5 mm
thick 27 mm high having flanges of 20 mm and 30 mm long, the
perimeter of ceiling fixed to wall/partition with the help of rawl plugs
at 450 mm centre, with 25mm long dry wall screws @ 230 mm
interval, including fixing of gypsum board to ceiling section and
perimeter channel with the help of dry wall screws of size 3.5 x 25
mm at 230 mm c/c, including jointing and finishing to a flush finish
of tapered and square edges of the board with recommended jointing
compound , jointing tapes , finishing with jointing compound in 3
layers covering upto 150 mm on both sides of joint and two coats of
primer suitable for board, all as per manufacturer's specification and
also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably
fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
12.5 mm thick tapered edge gypsum plain board
conforming to IS: 2095- (Part I) :2011 (Board with BIS certification SQM 497.19 1207.37 600297.12
Providing and fixing tiled false ceiling of specified materials of size
595x595 mm in true horizontal level, suspended on inter locking
metal grid of hot dipped galvanized steel sections ( galvanized @
120 grams/ sqm, both side inclusive) consisting of main "T" runner
with suitably spaced joints to get required length and of size 24x38
mm made from 0.30 mm thick (minimum) sheet, spaced at 1200
mm center to center and cross "T" of size 24x25 mm made of 0.30
mm thick (minimum) sheet, 1200 mm long spaced between main
"T" at 600 mm center to center to form a grid of 1200x600 mm and
secondary cross "T" of length 600 mm and size 24x25 mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the
1200x600 mm panel to form grids of 600x600 mm and wall angle of
size 24x24x0.3 mm and laying false ceiling tiles of approved texture
in the grid including, required cutting/making, opening for services
like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main
"T" runners to be suspended from ceiling using GI slotted cleats of
size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50
mm long dash fasteners, 4 mm GI adjustable rods with galvanised
butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm
center to center along main T, bottom exposed width of 24 mm of all
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of
size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I
sheet having galvanizing of 100 gms/sqm (both sides inclusive) and SQM 139.41 1677.02 233793.36
electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and Fixing 15 mm thick densified tegular edged eco friendly
light weight calcium silicate false ceiling tiles of approved texture of
size 595 x 595 mm in true horizontal level, suspended on inter locking
metal grid of hot dipped galvanised steel sections (galvanising @ 120
grams per sqm including both side) consisting of main ‘T’ runner
suitably spaced at joints to get required length and of size 24x38 mm
made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre
to centre, and cross “T” of size 24x28 mm made out of 0.33 mm
(Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm
centre to centre to form a grid of 1200x600 mm and secondary cross
‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick
(Minimum) sheet to be inter locked at middle of the 1200x 600 mm
panel to from grid of size 600x600 mm, resting on periphery walls
/partitions on a Perimeter wall angle pre-coated steel of
size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with
the help of rawl plugs at 450 mm centre to centre with 25 mm long
dry wall screws @ 230 mm interval and laying 15 mm thick densified
edges calicum silicate ceiling tiles of approved texture in the grid,
including, cutting/ making opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc., wherever required. Main
Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling System
with 20/25mm thick Optra Microlook 90 Edge Tiles with Sillhouette
15mm face exposed grid.
The tiles shall have smooth laminated visual with Humidity Resistance
(RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption Co-
efficient readings taken at 250 Hz, 500 Hz,
1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance
≥88% as per ASTM
E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS
476 Part 6/7 with
20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in
module size of 600 x
600mm. It shall be suitable for Green Building application, with
Recycled content of
Properties of Tile Relevant Standards
Base Material Fibre Glass
Panel Dimensions 600 x 600 m (Nominal)
593 x 593 mm (Actual)
Panel Thickness 15/20 mm
I SUB HEAD-VIII-FINSHING WORK
12mm cement plaster in single coat on fair side of single or half brick
wall for exterior plastering up to floor two level including internal
56 rounded angles chamfers, and/or rounded angles not exceeding SQM 1420.57 310.13 440561.37
80mm in girth and finished even and smooth no extra for mixing any
additive. 1:6 (1 cement: 6 coarse sand)
15 mm cement plaster on the rough side of single or half brick wall of
mix : 1:6 (1 cement: 6 coarse sand)
58 6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand) SQM 950.19 266.61 253330.16
Finishing walls with textured exterior paint of required shade: New
59 work (Two or more coats applied @ 3.28 ltr/10 sqm) over and SQM 1420.57 258.13 366691.73
including priming coat of exterior primer applied @ 2.20kg/10 sqm
Finishing walls with 100% Premium acrylic emulsion paint having VOC
less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &
fungal resistance, dirt resistance exterior paint of required shade
(Company Depot Tinted) with silicon additives.
New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and
including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
61 Providing and fixing GRC Bricktile 15mm thickness SQM 128.59 1955.00 251399.32
Applying priming coat:
With ready mixed red oxide zink chromate primer of approved brand
and manufacture on steel galvanised iron/steel works.
Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
Two or more coats on new work. SQM 3741.49 145.24 543414.01
Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade:
Two or more coats on new work. SQM 2046.62 138.50 283456.87
Providing and applying white cement based putty of average thickness
64 1 mm, of approved brand and manufacturer, over the plastered wall SQM 5162.06 130.49 673597.21
surface to prepare the surface even and smooth complete.
J SUB HEAD-IX -ALUMINIUM WORK
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of
required dia and size, including necessary filling up the gaps at
junctions, i.e. at top, bottom and sides with required EPDM rubber/
neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P.
brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing, paneling
and dash fasteners to be paid for separately) :
For fixed portion
Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade KG 305.10 457.21 139494.77
For shutters of doors, windows & ventilators including
providing and fixing hinges/ pivots and making provision
for fixing of fittings wherever required including the cost
of EPDM rubber / neoprene gasket required (Fittings
shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to required shade
according to IS: 1868, Minimum anodic coating of grade KG 1386.50 560.30 776855.95
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions of SQM 169.16 1576.34 266653.67
engineer-in-charge . (Cost of aluminium snap beading shall be paid
in basic item):
With float glass panes of 8 mm thickness (weight not
less than 20 kg/sqm)
J SUB HEAD-X-WATER PROOFING
Providing and laying integral cement based water proofing treatment
65 including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations:
Applying a slurry coat of neat cement using 2.75 kg/sqm of cement
admixed with water proofing compound conforming to IS. 2645 and
(a) approved by Engineer-in-charge over the RCC slab including adjoining
walls upto 300 mm height including cleaning the surface before
Laying brick bats with mortar using broken bricks/brick bats 25 mm to
115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse
sand) admixed with water proofing compound conforming to IS : 2645
and approved by Engineer-in-charge over 20 mm thick layer of
(b) cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with
water proofing compound conforming to IS : 2645 and approved by
Engineer-in-charge to required slope and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions of
walls and slabs.
After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin-
Finishing the surface with 20 mm thick jointless cement mortar of mix
1:4 (1 cement :4 coarse sand) admixed with water proofing compound
conforming to IS : 2645 and approved by Engineerin- charge including
laying glass fibre cloth of approved quality in top layer of plaster and
finally finishing the surface with trowel with neat cement slurry and
making pattern of 300x300 mm square 3 mm deep.
The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra
Providing and fixing High Quality ROOF Panel 50 MM Thick ,With both
66 side PPGI SHEET (SHEET MAKE TATA/JSW )(COLOUR WHITE OFF ) SQM 1219.29 2384.00 2906781.40
DENSITY 40 kg/m3 (+-2)
Providing and fixing High Quality WALL Puf Panel 50MM Thick ,with
67 both side.PPGI SHEET (SHEET MAKE TATA/JSW )(COLOUR OFF SQM 700.05 2253.00 1577214.90
WHITE) DENSITY 40 kg/m3 (+-2)
Structural steel work riveted, bolted or welded in built up sections,
68 trusses and framed work, including cutting, hoisting, fixing in position KG 27600.00 117.95 3255420.00
and applying a priming coat of approved steel primer all complete.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Steel work in built up tubular (round, square or rectangular hollow
tubes etc.) trusses etc., including cutting, hoisting, fixing in position
and applying a priming coat of approved steel primer, including
welding and bolted with special shaped washers etc. complete.
Hot finished seamless type tubes KG 3910.00 163.20 638112.00
Designing, providing, installing and fixing factory finished custom
designed cold form Light Gauge Steel Framed super structure
comprising of steel wall panel, trusses, purlins etc manufactured out of
minimum 0.75 mm thick steel sheet as per design requirements. The
steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy
coated steel having minimum yield strength 300-550 Mpa) conforming
to AISI specifications and IBC 2009 for cold formed steel framing and
construction and also as per IS: 875-1987, ISO 800-1984 and IS:01-
1975. The wind load shall be as per provisions of IS 875 (part -III).
LGSFS frame shall be designed as per IS: 801 using commercially
available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/
ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage
of Connection Accessories like Heavy Duty Tension Ties, Light Duty
Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie,
Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better
structural stability. The framing section shall be cold form C-type
having minimum web depth 89 mm x 39mm flange x 11mm lip in
required length as per structural design requirement duly punched
with dimple/ slot at required locations as per approved drawings. The
slots will be along centre line of webs and shall be spaced minimum
Designing, Providing, installing and fixing factory finished customed
design pregalvanized high tensile steel joists manufactured from G350
Z275 confirming to IS:277-1992, minimum coating of galvanizing 275
gm/sqm, minimum yield stress 35 MPa & minimum tensile strength of
380 MPa placed 1.23 metre apart to support the load of slab etc as per
the design & directions of Engineer-in-Charge.
Providing and Fixing of Acoustical Wall Panel with square edges made
of fibre glass substrate 25mm thick, wrapped on the front side with an
acoustically transparent fabric as per the approved shade (Husk,
Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut
and Shell). The panel shall be classified for Fire Class A, as per ASTM E-
84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal)
or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average
value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz,
1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be
fixed to wall on a framework of wooden battens and using Wall panel
Impalers (supplied by the manufacturer) or by using construction
adhesives (as per the instructions laid down by the manufacturer).
The fibre glass substrate shall have a recycle content of 85%.
Properties of Tile Relevant Standards Base Material Fibre Glass Panel
Dimensions 600mm x 600/1200mm Panel Thickness 25mm Panel
Finish Acoustically transparent fabric as per the approved shade
(Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame,
Peanut and Shell). Fire Properties Class A ASTM E-84
Noise Reduction Co-efficient 0.85 ASTM C423 (Average value of
Absorption Coefficient readings taken at 250 Hz, 500 Hz, 1000 Hz and
Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic &
biologically sound binding agent) bonded woodwool Panel planks of
600Mm*1200Mm *25Mm thickness made out of wood wool fibre of
width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-
Cement) with open & smooth surface texture. A Completly harmless
Envirenment & Human Friendly & also a disposable or recyclable
Material & can last for long span in building interiors As it has long
lifespan & suitable for Indoor conditions with relative air humidity of
upto 90%. Magnesite protects the wood cells against ageing & fungal
attack. To achive upto NRC=1.00 it should be a clear gap of 200Mm
from wall slab along with the backing of Mineral of 50kg/m3. Edge
Heradesign Woodwool - Acoustical Wall Mounting System Solutions-
Ecologically Sound
Material with high mechanical strength with Crash test of 90Km/H with
Ball Impact Test
DIN18032 & EN13964 with flying colors & A sustainable material (PEFC
& FSC Certified)
along with EPD Certified Acc. to EN ISO 14025 (AUB-Environmental
Product declaration).
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and fixing in position, 130 mm thick factory made Expanded
Polystyrene Core (EPS Core) wall panels consisting of EPS core
sandwiched between two Engineered sheets of welded wire fabric
mesh duly finished with shortcrete materials on outer faces. The fabric
mesh shall be made of 3 mm dia zinc coated G.I. wire mesh with 50
mm pitch in both the directions and on both faces of the wall and
connected by GI wire of 3mm dia at alternate row by welding. The EPS
core shall consist of 60 mm thick EPS of density not less than 16 kg/
per cum. Both the outer faces of the panel shall be finished by
applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3
coarse sand (not having more than 40% stone chips of size upto 6
mm)} with the help of shotcreting/guniting equipment etc at a
pressure not less than 1 bar (100KN/m2) and both surfaces finished
with trowel. Fixing operations of wall panels shall be completed in all
respect as per drawings and specifications and under the overall
direction of the Engineer-in-charge.
A. SUB HEAD -I : SANITARY FIXTURES & FITTINGS
Providing and Fixing white viterous china pedestal type water closet (
European type WC Pan ) with seat and lid , 10 litre low level White pvc
flushing cistern , including flush pipe with manually controlled device (
1 handle lever ) , Conforming to IS : 7231 with all fittings and fixtures Each 10.00 5837.52 58375.20
complete including cutting and making good the walls and floors
wherever required . WC Pan with ISI marked white solid plastic seat
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
2 pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require :
White Vitreous China Wash basin size 630x450 mm with a pair of 15
mm C.P. brass pillar tap
Providing and fixing 600x450 mm beveled edge mirror of superior
3 glass ( of approved quality ) complete with 6 mm thick hard board Each 8.00 1486.79 11894.32
ground fixed to wooden cleats with C.P brass screws and washers
complete .and fixing white vitreous china flat back half stall urinal of
size 580x380x350 mm with white PVC automatic flushing cistern, with
fittings, standard size C.P. brass flush pipe, spreaders with unions and
clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap
with outlet grating and other couplings in C.P. brass, including painting
of fittings and cutting and making good the walls and floors wherever
Range of three half stall urinals with 10 litre P.V.C. automatic flushing
Providing and fixing stone slab with table rubbed, edges rounded and
polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal
partitions by cutting a chase of appropriate width with chase cutter
4 and embedding the stone in the chase with epoxy grout or with
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 6 mm nominal size) as per direction of Engineer-in-charge
and finished smooth.
4.1 Granite Stone of approved shade Sqm 3.00 3732.75 11198.25
5 Providing & fixing C.P. brass bib cock of approved quality conforming
5.1 15 mm nominal bore Each 18.00 457.47 8234.46
Providing and fixing CP Brass 32mm size bottle trap of approved 933.75 7470.00
quality & make and as per the direction of engineer in charge.
6 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
6.1 15 mm nominal bore Each 28.00 527.17 14760.76
7 Providing and fixing unplasticised P.V.C. connection pipe with PTMT
Nuts, collar and bush of approved quality and colour.
7.1 15 mm nominal bore with 45cm length Each 30.00 89.77 2693.10
Providing and fixing CP Brass extension nipple ( size 15mm x 50 mm )
8 of approved make and quality as per direction of engineer - in - charge Each 30.00 65.01 1950.30
9 Providing & fixing of Waste pipe for Wash basins & Sinks including pvc
waste fittings complete.
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, ISI : 12701 marked, with cover and suitable locking
10 arrangement and making necessary holes for inlet, outlet and overflow LIT 10000.00 10.22 102200.00
pipes but without fittings and the base support for tank.
11 Providing and fixing PTMT grating of approved quality and colour
Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto
1meter long with S.S. Triangular plate to european type W.C. Of Each 10.00 315.40 3154.00
approved quality and make as approved by engineer in charge.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Providing and fixing vertical or horizontal storage type hot water
heater electrical operated fixed to wall with anchor bolts & nuts, 15mm
1.00 CP brass angle stop cock and 15mm CP brass non-return valve
complete including making connections with 15mm dia CP connecting
pipes on inlet and outlet, suitable length of power cable and 15 amps
13.1 15 Litre Capacity Each 6.00 12081.00 72486.00
Providing and fixing toilet paper holder :
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour, Each 6.00 154.14 924.84
weighing not less than 105 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings
arrangement of approved quality and colour.
450 mm long towel rail with total length of 495 mm, 78 mm wide and
effective height of 88 mm, weighing not less than 170 gms
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet
100 mm diameter Each 6.00 175.27 1051.62
Providing and fixing CP brass stop cock (concealed) of standard design
and approved make confirming to IS: 8931.
15mm nominal bore Each 12.00 626.63 7519.56
Providing & Fixing of Grab bar size 600X600 mm pipe O.D 32 mm ,
thiickness 2 mm of non slipping grip as per standard specification of
use in disabled toilet complete with brackets suitable for wall Each 1.00 16312.00 16312.00
installation as per approved sample complete in all respect.
B. SUB HEAD-II- SOIL , WASTE VENT AND RAIN WATER PIPE
Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone
1 aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 Each 4.00 280.89 1123.56
micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand)
and a coat of neat cement rounding the edges and making and
finishing the outlet complete
Providing and Fixing on wall unplasticised Rigid PVC Rain water pipes
2 conforming to IS : 13592 Type A , including jointing with seal ring
conforming to IS : 5382 , leaving 10 mm gap for thermal expansion
2.1 Single Socketed pipes 110 mm diameter Metre 96.00 336.89 32341.44
Providing and Fixing to the inlet mouth of rain water pipe cast iron
3 grating 15 cm diameter and weighing not less than 440 grams . Each 8.00 50.47 403.76
4 Providing and Fixing 100 mm diameter and 60 cm long rain water
spout in cement mortar 1:4 ( 1 Cement : 4 Fine Sand )
4.1 Stone Ware Spout Each 2.00 149.72 299.44
Providing and Fixing on wall face Rigid Unplasticised UPVC moulded
fittings / accessories for unplasticised Rigid PVC Rain water pipes
5 conforming to IS : 13592 Type A including jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion .
Single Push Fit Coupler
Single Tee with door
Single Tee without door
Bend 87.5 degree
Providing and Fixing unplasticised PVC pipe clips of approved design to
unplasticised - PVC rain water pipes by means of 50x50x50 mm hard
6 wood plugs , screwed with MS screws of required length , including
cutting brick work with fixing in cement mortar 1:4 ( 1 Cement : 4
Coarse Sand ) and making good the wall etc . complete
Providing and fixing uPVC 6 Kg/cm2 Soil , Waste & RWP pipes (IS:
13592 Class B) including all fittings (plain or door) e.g. bends,
7 junction, cowls, offsets, access pieces, jointing with rubber
ring/solvent cement joints including cutting chase or holes in walls and
floors and making good wherever required.
Providing & fixing in position upvc P"or S" trap of self cleaning design
of following sizes for the embedded areas Making proper connection
8 with chemical sealent joint , cutting chase / hole in floors /slabs and
bringing the same in proper condition in cement concrete 1:2:4 mix
complete as required. including cost of cutting and making good the
walls and floors where required.
8.1 110 mm inlet and 110 mm outlet Each 10.00 734.00 7340.00
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
9 Providing & fixing in position upvc floor drain including cost of cutting
and making good the walls and floors wherever required.
9.1 110 mm inlet and outlet Each 18.00 451.00 8118.00
Providing and fixing uPVC waste pipes for WB , SINK , URINAL , FD
(IS: 4985 ) 6 Kg / Sqcm including all fittings (plain or door) e.g.
10 bends, junction, cowls, offsets, access pieces, jointing with rubber
ring/solvent cement joints including cutting chase or holes in walls and
floors and making good wherever required.
Providing and fixing Cast bronze chrome plated grating with ring and
11 Stainless steel anti cockroach basket and two SS screw including fixing
to the floor with cement mortar.
Providing and fixing UPVC inlet fitting with maximum 3 inlets 32,40
or 50 mm size fabricated from 110 mm dia UPVC pipes and fixed to
12 upvc sockets,fixed to upvc trap with chemical sealent joint and set in Each 7.00 4682.00 32774.00
cement concrete as per standard drawing complete.
Providing and fixing upvc cleanout plug( Ceiling or Floor) with suitable
13 insert keys for opening, male threaded joint with upvc socket fixed to
uPVC pipe complete in all respects.
13.1 110 mm diameter Pipe Each 4.00 538.00 2152.00
75 mm dia pipe Each 6.00 495.00 2970.00
C. SUB HEAD- III - INTERNAL WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe with clamps at
1 1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting chases and making good
the same including testing of joints complete as per direction of
Engineer in Charge.
Concealed work, including cutting chases and making good the walls
1.1 15 mm nominal outer dia Pipes Metre 35.00 464.80 16268.00
1.2 20 mm nominal outer dia Pipes Metre 40.00 541.29 21651.60
1.3 25 mm nominal outer dia Pipes Metre 40.00 659.61 26384.40
1.4 32 mm nominal outer dia Pipes Metre 40.00 750.95 30038.00
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe with clamps at
1.00 m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and testing of joints complete as per direction of
Engineer in Charge.
Internal work - Exposed on wall
25mm nominal bore Metre 40.00 429.87 17194.80
32 mm nominal bore Metre 40.00 527.80 21112.00
40mm nominal bore Metre 50.00 710.50 35525.00
50mm nominal bore Metre 120.00 976.69 117202.80
Providing and fixing Thermoflex or Careflex thermal insulation tubing,
a elastomeric flexible material having hermetic blister closed cell
2 structure of expanded synthetic rubber over pipes of following nominal
bores and thickness including all required accessories complete as per
9 mm thick ( Pipes in Chases)
2.1 For 15 mm dia Pipe Metre 10.00 92.00 920.00
2.2 For 20 mm dia Pipe Metre 50.00 101.00 5050.00
For 32 mm dia Pipe Metre 20.00 120.00 2400.00
Providing and Fixing full way lever operated forged brass ball valve of
3 brass body with forged brass hard chromeplated steel ball tasted to a
pressure not less than 15 kg/sqcm with threaded / flanged joints
complete with nuts, bolts, gaskets, washers etc.
3.1 15 mm dia nominal bore Each 2.00 250.00 500.00
3.2 20 mm dia nominal bore Each 5.00 340.00 1700.00
3.3 25 mm dia nominal bore Each 5.00 512.00 2560.00
3.4 32 mm dia nominal bore Each 4.00 774.00 3096.00
3.5 40 mm dia nominal bore Each 3.00 1195.00 3585.00
Providing, fixing, testing and commissioning of motorised butterfly
valve of following dia for filling of overhead water tank complete with
high and low level control switches to control tanks. The level
controllers shall be installed in overhead tanks. The level switch will
4 close the valve when water level is high in overhead tank and open
the valve when overhead water tank level is low. The system should
be complete in all respects with accessories 220 V AC / 24 V DC, IP67
electrical water level control unit, copper control wiring in whether
40 mm casing etc.
dia nominal bore Each 1.00 11393.00 11393.00
SUB HEAD- IV DRAINAGE
Excavating trenches of required width for pipes, cables, etc including
excavation for sockets, anddressing of sides, ramming of bottoms,
depth up to 1.5 m, including getting out the excavated soil, and then
returning the soil as required, in layers not exceeding 20 cm in depth,
including consolidating each deposited layer by ramming, watering,
etc. and disposing of surplus excavated soil as directed,within a lead of
All kinds of soil
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia METER 270.00 439.72 118724.40
Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight C.I.
cover with frame of 300x300 mm size (inside) the weight of cover to
be not less than 4.50 kg and frame to be not less than 2.70 kg as per EACH 7.00 2585.06 18095.42
standard design: 100x100 mm size P type. With common burnt clay
F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement
: 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size), inside plastering 12 mm thick
with cement mortar 1:3 (1 cement : 3 coarse sand) finished with
floating coat of neat cement and making channels in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) finished with a floating coat of neat cement complete as
per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame
(light duty) 455x610 mm internal dimensions,total weight of cover and
frame to be not less than 38 kg (weight of cover 23 kg and weight of
With common burnt clay F.P.S.(non modular) bricks of class
designation 7.5 EACH 8.00 12313.53 98508.24
Constructing brick masonry road gully chamber 45x45x77.5 cm with
bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast
R.C.C. vertical grating complete as per standard design :
with common burnt clay F.P.S.(non module) brick of class designation EACH 12.00 6593.64 79123.68
Providing, laying and jointing glazed stoneware pipes class SP-1 with
stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1
fine sand) including testing of joints etc. complete :
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse
sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W.
pipes including bed concrete as per standard design :
150 mm diameter S.W. pipe EACH 130.00 1153.85 150000.50
Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to
IS: 1786, having minimum cross section as 23 mmx25 mm and over
all minimum length 263 mm and width as 165 mm with minimum 112
mm space between protruded legs having 2 mm tread on top surface
by ribbing or chequering besides necessary and adequate anchoring
projections on tail length on 138 mm as per standard drawing and EACH 28.00 513.21 14369.88
suitable to with stand the bend test and chemical resistance test as
per specifications and having manufacture's permanent identification
mark to be visible even after fixing, including fixing in manholes with
30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand
: 6 graded stone aggregate 20 mm nominal size) complete as per
Making connection of drain or sewer line with existing manhole
including breaking into and making good the walls, floors with cement
concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cement plastered on both sides with
cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating
coat of neat cement and making necessary channels for the drain etc.
For pipes 100 to 250 mm diameter EACH 1.00 720.35 720.35
Constructing brick masonry circular type manhole 0.91 m internal
dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement
: 4 coarse sand), inside cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat
of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 40 mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished
with a floating coat of neat cement, all complete as per standard
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
0.91 m deep with SFRC cover and frame (heavy duty, HD-
20 grade designation) 560 mm internal diameter conforming
to I.S. 12592, total weight of cover and frame to be not
less than 182 kg., fixed in cement concrete 1:2:4 (1 cement
: 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at
the external surface shall be paid for separately) :
With common burnt clay F.P.S. (non modular) 12523.56 12523.56
bricks of class designation 7.5
Supplying, installing, testing and commissioning vertical on line multi
stage centrifugal pumping set with mechanical seal, C.I. volute and
SS impeller & SS shaft connected to a TEFC induction motor of
suitable HP for 415 volts, 3 phase, 50 cycles A.C. supply with 150 mm
dia pressure gauge with SS/gunmetal isolation cock, vibration
eliminating pads, base plate wiring upto panel and equipment for
water level controller to start and stop the pump automatically at
predecided levels of the water in the tank with provision of protection
for dry run etc. complete in all respect (The shop drawing or the
pumps along with its characteristics curves, model and technical data
etc. are to be submitted for approval before purchase of pump).
Domestic water pumps (Treated water transfer pump to terrace tank)
Capacity 50 lpm
SUBHEAD - I - CIRCUIT CUM POINT WIRING
Wiring for light point/ fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable in
1 surface / recessed medium class PVC conduit, with modular switch,
modular plate, suitable GI box and earthing the point with 1.5 sq.mm
FRLS PVC insulated copper conductor single core cable etc. as
Wiring for group controlled (looped) light point/fan point/exhaust fan
point/ call bell point ( without Independent switch etc.) with 1.5 sq.
2 mm FRLS PVC insulated copper conductor single core cable in surface/
recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS
PVC insulated copper conductor single core cable etc as required.
(Switch Control Secondary Points)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable in
3 surface / recessed steel conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc. as required. (Switch
Control Primary Points)
Wiring for group controlled (looped) light point/fan point/exhaust fan
point/ call bell point (without Independent switch etc.) with 1.5 sq.
4 mm FRLS PVC insulated copper conductor single core cable in surface/
recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS
PVC insulated copper conductor single core cable etc as required.
(Switch Control Secondary Points)
MCB CONTROL LIGHT POINTS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with
2.5 sq.mm FRLS PVC insulated copper conductor single core cable in
5 surface / recessed steel conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc. as required. (Switch
Control Primary Points)
5.1 Primary point controlled by one MCB. Point 14.00 1535.50 21497.00
5.2 Same as item above but Secondary point. i.e. Points to be looped with Point 1365.90 19122.60
Primary point with 2.5 sqmm wire and Point wiring
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated
6 copper conductor single core cable in surface/ recessed steel conduit Metre 350.00 456.21 159673.50
alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single
core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the
7 following sizes of FRLS PVC insulated copper conductor, single core
cable in surface/ recessed steel conduit as required.
7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50.00 344.53 17226.50
7.3 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100.00 620.57 62057.00
7.4 2 x 10 sq. mm + 1 x 6 sq.mm earth wire Metre 150.00 748.06 112209.00
7.5 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 100.00 1228.50 122850.00
7.6 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 60.00 1733.17 103990.20
Supplying and fixing suitable size GI box with modular plate and
8 cover in front on surface or in recess, including providing and Each 16.00 502.57 8041.12
fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular
switch, connections etc. as required.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Supply and Wiring for 250 volts single phase and neutral 2 Nos 6
amps socket outlate with control by 1 No switched with 2.5 sq.mm
PVC insulated copper conductor 1100 volts grade stranded flexible
FRLS wires in concealed or surface mounted 25 mm dia 2mm thick
9 PVC conduit including providing and fixing of 6 amps 3 pin switch Each 14.00 1796.31 25148.34
socket outlet of aprpoved make and design in 2 mm thick GI box with
grid plate and earthing of third pin of the socket with 2.5 Sq. mm
PVC insulated copper conductor stranded flexible FRLS
wire.(maximum four no. of switches socket shall be connected on
Supplying and fixing suitable size GI box with modular plate and
10 cover in front on surface or in recess, including providing and Each 15.00 617.41 9261.15
fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A
modular switch, connections etc. as required.
11 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction Each 2.00 91.66 183.32
box/ wooden block including connections etc. as required.
Supplying & fixing suitable size GI box wih modular plate and cover in
front on surface or in recess i/c providing and fixing 25 amp modular
12 socket outlet and 25 Amps modular SP MCB, “C” curve including Each 2.00 765.97 1531.94
connection, painting etc. as required. (AC's & Gysers)
Supplying and fixing following modular switch/ socket on the
13 existing modular plate & switch box including connections but
excluding modular plate etc. as required.
13.1 Telephone socket outlet Nos 4.00 155.93 623.72
Supplying and fixing following size/ modules, GI box alongwith
14 modular base & cover plate for modular switches in recess etc.
Supplying and fixing following size/ modules, GI box alongwith
15 modular base & cover plate for modular switches in recess etc.
15.1 3 pin , 5/6 amps socket outlet Each 2.00 128.54 257.08
Supplying and fixing following size/ modules, GI box alongwith
16 modular base & cover plate for modular switches in recess etc.
Supplying and fixing of following sizes of medium class PVC
17 conduit along with accessories in surface/recess including
cutting the wall and making good the same in case of recessed
conduit as required.
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated
18.1 annealed copper conductor, unarmored telephone cable in the existing
surface/ recessed steel/ PVC conduit as required.
SUBHEAD - II - FITTINGS & FIXTURES
1 Supply, Installation, Testing and Commissioning of 9 W Bulk head Each 1778.35 10670.10
2 Supply, Installation, Testing and Commissioning of 5W Mirror Light. Each 1077.79 2155.58
3 Supply, Installation, Testing and Commissioning of 18W Each 1975.94 181786.48
Recessed/Surface Mounted LED circular Downlighter.
4 Supply, Installation, Testing and Commissioning of 20W Wall/Surface Each 1975.94 29639.10
mouted 4 ft. LED
5 Supply, Installation, Testing and Commissioning of 65W Surface Each 6107.46 73289.52
mounted LED Bay light.
Supply, Installation, Testing and Commissioning of 12W Recessed
6 mounted LED circular Downlighter (Cat no-Bajaj Lighting BGSLO Each 60.00 1167.60 70056.00
SLEEK SURFACE 12W WH RD or equivalent as specified in the
approved list of make)
7 Supply, Installation, Testing and Commissioning of 150W highway Each 7469.82 59758.56
with 150LPW Ceiling mounted LED Light Fixtures
8 Supply, Installation, Testing and Commissioning of 250W Highway with Each 11204.73 212889.87
130LPW ceiling mounted LED Light Fixtures
Supply, Installation, Testing and Commissioning of 1200 mm sweep,n
BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)
Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2
nos. canopies, shackle kit, safety rope, copper winding, Power Factor
not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery
minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),
THD less than 10%, remote or electronic regulator unit for speed
control and all remaining accessories including safety pin, nut bolts,
washers, temperature rise=75 degree C (max.), insulation resistance
more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
Supply, earthing etc. complete as required.
Supplying and fixing two module stepped type electronic fan
10 regulator on the existing modular plate switch box including Each 20.00 388.78 7775.60
connections but excluding modular plate etc. as required.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Installation, testing and commissioning of ceiling fan, including
11 wiring the down rods of standard length (upto 30 cm) with 1.5 Each 20.00 224.42 4488.40
sq. mm FRLS PVC insulated, copper conductor, single core cable
etc. as required.
12 Supply of 300 mm dia Domestic Exhaust Fan Each 5.00 2155.58 10777.90
13 Supply of heavy duty 450mm Wall Fan each 15.00 6848.44 102726.60
SUBHEAD - III - MAIN BOARDS
Supplying, installing, testing & commissioning of following type
compartmentalised wall mounted / floor mounted cubicle board made
from 2mm thick CRCA sheet dust & vermin proof duly phosphatized &
1 powder coated inclusive of suitable size 4 strip Al. Busbar complete
with interconnection providing Lugs, inter-earthing, painting etc. i/c
providing & fixing below noted accessories:
Receiving,unloading,storing, handling, installation, testing and
commissioning of following MV Switchboards complete as required and
as per site condition and dimension of all panels shall be carried out as
per the attachad sld
1 MAIN LT PANEL ( FOR BUILDING ) Set 1.00 150800.00 150800.00
2 FIRE FIGHTING PANEL Set 1.00 40000.00 40000.00
SUBHEAD - IV - DISTRIBUTION BOARDS
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
1 complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required. (But without MCB/RCCB/Isolator)
1.1 6 way, Double door Each 0.00 2324.24 0.00
1.2 8 way, Double door Each 1.00 2710.91 2710.91
1.3 12 way, Double door Each 2.00 2439.08 4878.16
Supplying and fixing following way, three pole and neutral, sheet steel,
MCB distribution board, 415 volts, on surface/ recess complete with
2 tinned copper busbar, neutral busbar, earth bar, din bar, detachable
gland plate, interconnections, phosphatized and powder painted
including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
Supplying and fixing of following ways surface/ recess mounting,
vertical type, 415 V, TPN MCB distribution board of sheet steel, dust
protected, duly powder painted, inclusive of 200 A tinned copper bus
3 bar, common neutral link, earth bar, din bar for mounting MCBs (but
without MCBs and incomer) as required . (Note :Vertical type MCB
TPDB is normally used where 3 phase outlets are required.)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,
4 miniature circuit breaker suitable for inductive load of following poles
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
4.2 Single Pole Neutral Each 0.00 631.11 0.00
Supplying and fixing following rating, double pole, 240 V, isolator in
5 the existing MCB DB complete with connections, testing and
commissioning etc. as required.
Supplying and fixing following rating, four pole, 415 V, isolator in the
6 existing MCB DB complete with connections, testing and
commissioning etc. as required.
Supplying and fixing following rating, double pole, (single phase and
neutral), 240 V, residual current circuit breaker (RCCB), having a
7 sensitivity current 30 mA in the existing MCB DB complete with
connections, testing and commissioning etc. asrequired.
Supplying and fixing DP sheet steel enclosure on surface/ recess
8 along with 25/32 A 240 V "C" curve DP MCB complete with Each 3.00 1231.66 3694.98
connections, testing and commissioning etc. as required.
9 Supplying and fixing single pole blanking plate in the existing Each 13.70 68.50
MCB DB complete etc. as required.
SUBHEAD - V - EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
1 including accessories, and providing masonary enclosure with cover Sets 1.00 7872.50 7872.50
plate having locking arrangement and watering watering pipe 2.7
metre long etc. with charcoal/ coke and salt as required.
Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick including
accesssories, and providing masonary enclosure with cover plate (CI
2 heavy duty) having locking arrangement and watering pipe pipe of 2.7 Sets 1.00 14579.72 14579.72
mtr long etc. with charcoal or coke and salt) as required.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe
3 from earth electrode, including connection with G.I. nut, bolt, spring, Mtr 20.00 743.84 14876.80
washer excavation and refilling etc. as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in
4 recess for connections etc. as required. 2 nos used for 50 x 5 for the Mtr 20.00 1224.28 24485.60
Neutral earthing of euipments )
5 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess Mtr 257.08 5141.60
for connections etc. as required.
6 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for Mtr 73.75 1475.00
loop earthing etc. as required.
Supplying, fixing, testing and commissioning of following bare Copper/
7 GI flat including all necessary fixing accessories and effecting
7.1 50 mm x 6 mm thick Cu flat Metre 0.00 2350.00 0.00
7.2 50 mm x 6 m thick GI flat Metre 0.00 420.00 0.00
Supply and laying medium class GI pipe under road/paved areas/wall
8 crossing etc. including earth excavations refilling, ramming and
making good as approved.
8.1 150 mm dia GI pipe Class B Metre 9.02 1600.00 14432.00
SUBHEAD - VI - SUPPLYING & LAYING OF CABLE
Laying of one number PVC insulated and PVC sheathed / XLPE power
cable of 1.1 KV grade of following size direct in ground including
1 excavation, sand cushioning, protective covering and refilling the
1.2 Above 35 sq. mm and upto 95 sq. mm Mtrs. 0.00 426.71 0.00
1.3 Above 95 sq. mm and upto 185 sq. mm Mtrs. 0.00 444.62 0.00
1.4 Above 185 sq. mm and upto 400 sq. mm Mtrs. 0.00 499.41 0.00
Laying of one number additional PVC insulated and PVC sheathed /
XLPE power cable of 1.1 KV grade of following size direct in ground in
2 the same trench in one tier horizontal formation including excavation,
sand cushioning, protective covering and refilling the trench etc. as
2.2 Above 35 sq. mm and upto 95 sq. mm Mtrs. 0.00 301.33 0.00
2.3 Above 95 sq. mm and upto 185 sq. mm Mtrs. 0.00 320.29 0.00
2.4 Above 185 sq. mm and upto 400 sq. mm Mtrs. 0.00 375.08 0.00
Supply of following sizes of XLPE insulated Aluminum conductor strip/
3 wire Armoured, overall PVC sheathed 1.1 KV grade cables conforming
to relevant IS-7098 Code and technical specifications.
Supplying and making end termination with brass compression gland
4 and aluminium lugs for following size of PVC insulated and PVC
sheathed / XLPE aluminium conductor cable of 1.1 KV grade
SUB HEAD -VII :EXTERNAL LIGHT
Supplying, installation, testing and commissioning of 65W LED Street
Light IP66 LED with High performance having system lumen output of
minimum 9900 lumens, contemporary designed housing made of die-
1 cast aluminium, with street optic LENS for uniform light distribution. PF Nos 4.00 7634.33 30537.32
better than 0.9, CRI better than 70 complete with all accessories.
Wipro Cat No.: LR 02-102-XXX-57-G2 Street light
2 SITC of 6m ht. GI pole alongwith control box,6A MCB etc. as required Nos 10000.00 40000.00
FIRE ALARAM SYSTEM
SUBHEAD - I - FIRE ALARM SYSTEM
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
1 Supplying, installation, testing and commissioning of micro
processor based intelligent addressable main fire alarm
panel, central processing unit with the following loop
modules and capable of supporting not less than 240 devices
(including detectors) and minimum 120 detectors per loop
and loop length up to 2 km, network communication card,
minimum 320 character graphics/ LCD display with touch
screen or other keypad and minimum 4000 events history log
in the non volatile memory (EPROM), power supply unit (230
± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed
maintenance free batteries with automatic charger. The
panel shall have facility to connect printer to printout log and
facility to have seamless integration with analog/digital voice
evacuation system (which is part of the schedule of work
under SH: PA System) and shall be complete with all
accessories . The panel shall be compatible for IBMS system
with open protocol BACnet/ Modbus over IP complete as per
specifications.
2 Supplying, installation, testing & commissioning of repeater
panel wih 320 character/ Touch screen LCD display with inbuilt Nos. 1.00 114513.68 114513.68
reset, acknowledge and silence switches complete as required.
3 Supplying, installation, testing & commissioning of addressable fire 3163.96 6327.92
control module complete as required.
4 Supplying, installation, testing & commissioning of Addressable
monitor module, 100% soft addressed from panel, integral short
circuit isolators, capable of monitoring NO contacts, Option to choose
operation mode as supervision of 20Sec or activation immediatee to Nos. 2.00 3134.00 6268.00
connect NO/NC contacts such as pressure switch, flow switches, fire
pump contacts etc Module shall be supplied with mounting plate from
OEM for ease of installation & maintenance.
5 Supplying, installation, testing & commissioning of addressable horn 3693.92 18469.60
cum strobe complete as required.
6 Supplying, installation, testing & commissioning of addressable manual 4078.49 20392.45
call point complete as required.
7 Supplying, installation, testing & commissioning of fire fighter 6047.66 12095.32
telephone handset complete as required.
8 Supplying, installation, testing & commissioning of fire fighter phone 1685.76 3371.52
jack complete as required.
9 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,
600/1000V rated with annealed copper conductor having XLPE Mtrs 250.00 182.27 45567.50
insulation, steel wire armouring & FRLS outer sheath complete as
10 Supplying and fixing of following sizes of steel conduit along with
accessories in surface/recess including painting in case of surface
conduit, or cutting the wall and making good the same in case of
recessed conduit as required.
FIRE FIGHTING WORK
A. SUB HEAD - A : PUMPS & EQUIPMENTS
1 Supplying , Installation , Testing and Commissioning of Electric Driven
Terrace Pump Suitable for Automatic operation and Consisting of
Following Complete in all Respect as Required ( Terrace Fire Pump )
1.1 Horizontal Type Multistage , Centrifugal Pump of Cast Iron Body and
Bronze Impeller with Stainless Steel Shaft Mechanical Seal Conforming
1.2 Suitable HP Squirrel cage Induction motor , TEFC , synchronous speed
1500 RPM , Suitable for operation on 415 Volts 3 Phase 50 Hz AC
Supply with IP 68 protection for enclosure Horizontal Foot Mounted
type with class F insulation Conforming to IS : 325 with Energy
Efficiency class IE-3
1.3 MS Fabricated Common Base Plate Coupling , Coupling Guard
Foundation bolts etc as Required
1.4 Suitable Cement Concrete Foundation duly Plastered with anti
The Head of the Pump is Selected in a manner so as to give a
minimum 3.5 kg/sqcm pressure at the highest / farthest point
2 Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick ms
sheet 2000 mm in height with air release valve on top and flanged
connection to riser drain arrangement with 25 mm dia gunmetal wheel Set 2 19221.88 38443.76
valve with required accessories pressure gauge and painting with
synthetic enamel paint of approved shade as required
B. PIPING, HYDRANT , AND ACCESSORIES SYSTEM
1 Providing Laying Testing and Commissioning of C class Heavy duty MS
Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows ,
tees , flanges , tapers , nuts , bolts , gaskets etc in ground including
welding excavation and Providing cement concrete blocks as supports
anticorrosive treatment with coaltar / asphalts tape as per IS :10221
refilling the trench etc of following sizes complete as required .
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
2 Supplying Fixing Testing and Commissioning of butterfly valve of PN
1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with
nuts , bolts , washers , gaskets conforming to IS : 13095 of following
sizes as required .
3 Providing Installation Testing and Commissioning of Non Return Valve
of following sizes conforming to IS : 5312 complete with rubber gasket
, GI Bolts , Nuts , washers etc as required .
4 Providing Installation Testing and Commissioning of Stainless Steel Y
Strainer fabricated out of 1.6 mm thick stainless steel , Grade 304 ,
Sheet with 3 mm dia holes with stainless steel flange .
5 Supplying and Fixing Single Headed Internal Hydrant Valve with
instantaneous gunmetal material coupling of 63 mm dia with cast iron
wheel ISI marked conforming to IS : 5290 ( Type A ) with blank
Gunmetal material cap and chain as required .
5.1 Single Headed Gunmetal Material Set 3 8055.83 24167.49
6 Supplying and Fixing orifice plate made out of 6 mm thick stainless
steel ( Grade 304 ) with orifice of required size to be fitted between
flange and landing valve of external and internal hydrants to reduce Each 4 1391.81 5567.24
pressure at the outlet to the level of 3.5 kg / sqcm complete as
7 Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm
dia male and female coupling duly bound with GI wire , rivet etc .
Conforming to IS : 636 ( Type A ) as Required .
7.1 Gunmetal Material Set 3 5480.83 16442.49
8 Supplying and Fixing First aid hose reel with MS Construction Spray
painted in Post office red conforming to IS : 884 complete with the
following as required
20 mm nominal internal dia water hose thermoplastic ( Textile
Reinforced ) Type - 2 as per IS : 12585
20 mm nominal internal dia gunmetal globe valve and nozzle
Drum and Brackets for fixing the equipments on wall
Connections from Riser with 25 mm dia stop gunmetal valve and MS
Pipe and socket
9 Supplying and Fixing 63 mm dia Gunmetal Short Branch Pipe with 20
mm nominal internal diameter size nozzle conforming to IS : 903
suitable for instantaneous connection to interconnect hose pipe
coupling as required .
9.1 Gunmetal Material Set 6 2545.50 15273.00
10 Providing and Fixing of Pressure Switch in MS Pipe Line including 1628.87 1628.87
connection etc as required
11 Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x
0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having
central opening and 4 mm thick glazed glass doors (Two nos.)
suitably marked on the outside 'with the letters "FIRE HOSE"
including necessary locking arrangement and painting in PO red Each 3 30495.00 91485.00
colour suitable to accommodate, internal hydrant valve, 2 nos 15
mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall
be fixed inside the FHC Cabinet Complete as required .
12 Providing and fixing weather proof Fire Hose Cabinet of size not less
than 0.75 x 0.6 x 0.25 mtr made out of M.S. sheet not less than 1.5
mm thick having central opening and 4 mm thick glazed glass doors
(Two nos.) suitably marked on the outside 'with the letters "FIRE
HOSE" including necessary locking arrangement and painting in PO Each 3 11854.00 35562.00
red colour suitable to accommodate, external yard hydrant valve, 2
nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe.
It shall be mounted on boundary wall complete as required.
13 Providing & fixing Controlled Percolating (CP) Hose ISI marked
(IS:8423) 63 mm dia x 15 m long complete with instantaneous type
Stainless steel 63 mm dia ISI marked Male & Female couplings Each 6 5081.00 30486.00
(IS:903) bound and riveted to hose pipe with copper rivets and 1.5
mm copper wire.brusting pressure not less than 22 Kg/Sqcm. (
Two nos. for each hydrant-valve)
14 Providing and fixing standard firemans axe with heavy rubber handle. 1467.00 4401.00
15 Providing and fixing dial type pressure gauge with isolation cock and
copper pipe on main header Dial diameter 100 mm celebration 0-16 / Each 12 3458.00 41496.00
16 Providing and fixing Fire Extinguishers (CO2 type powder ) 4 Kg
Capacity complete with all accessories as per manufacturers Each 1 5647.00 5647.00
specifications.
17 Providing and fixing Fire Extinguishers (A, B, C type powder ) 5 Kg
Capacity complete with all accessories as per manufacturers Each 14 4518.00 63252.00
specifications.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Supply of FBT Line Array Compact Bass reflex Active line array - 2x10"
+ 2x1"- 600Wrms+300Wrms Class D amplifiers, 600W RMS to the LF,
300W RMS to the HF 2 x 10” woofers with 2.5" coil 2 x custom B&C HF
compression drivers with 1" throats DSP on board with 8 preset 90°
horizontal waveguide up to 18kHz Control panel with XLR «in&link»,
HF level, preset, HP filter, GND lift switch High SPL capability: 135dB
Integrated rigging hardware Completely Manufactured in Italy (FBT-
Supply of Powered Base Speaker Configuration: 1 HYBRID
BANDPASS way 18"Built-in amplifier LF/HF: 1200 W RMS Built-in
amplifier peak LF/HF: 2400 W Frequency response: 33Hz-100Hz -6dB
Low Frequency woofer: 1X18 - 3.5 coil - neodymium inch Maximum
SPL cont/peak: 135/139 half-space dB Dispersion: Omnidirectional
HxV Input impedance: 22 Kohm Crossover Frequency: preset
dependant KHz AC Power requirements: 640 VA Input connector: XLR
with loop Power cord: 5/ 16.4 m/ft Net Dimension (WxHxD):
652x500x750 / 25.66x 19.68x29.52 mm/inch Net Weight: 67/147.70
kg/lb(FBT-Muse 118FSA)
Supply of Flying bar Indian (Customised) with 1 ton chain pully Nos 2.00 35988.00 71976.00
Supply of Stage Monitor Supply of Stage monitor 2-way, bi-amp. bass
reflex design, 400+100W rms Class D amp., 60Hz-20KHz freq resp,
12" B&C coax custom woofer, 1" B&C HF driver, DSP 4 presets, 130dB Nos 2.00 68818.00 137636.00
SPL max, Disp 90°, gas-injection polyprop molded enclosure (FBT-
STAGEMAX x 12MA)
Supply of Digital Audio mixer 24 mono mic inputs 4 line inputs 66
inputs to mix 1 ViSi Connect™ option card slot for 64 x 64
input/output expansion Freely assignable faders and patching Pre/Post
selection per input per bus AES in and out Global mode encoders
Soundcraft FaderGlow™ GEQ on every bus 20 sub-group / aux busses No. 1.00 220379.00 220379.00
4 FX busses 8 Matrix busses LR and C Mix busses 4 Stereo Lexicon
Effects engines Delay on inputs and outputs 4 Mute Groups Freely
assignable insert loops Harman HiQnet integration Colour touch screen
interface (Si Expersion-2)(Allen Heath QU 24)
Supply of Corded microphone (Shure-SM58/FBT/sennheiser) Nos 2.00 9154.00 18308.00
Supply of Instrument Microphone(Shure-57/FBT/sennheiser) Nos 2.00 9678.00 19356.00
Supply of Podium Microphone (Shure/FBT-GM5218L/AKG) Nos 2.00 28411.00 56822.00
Supply of Microphone Stand Big(GS) Nos 2.00 1124.00 2248.00
Supply of Microphone Stand Small(GS) Nos 2.00 843.00 1686.00
Supply of microphone cable from stage to control room for
microphone points with conduit pipe etc. (PLS/Tasker/Krystal)
Supply of Speaker 2.5sqmm x3core(Incol/Polycab/Kalinga/Incoil) Mtr 200.00 114.00 22800.00
Supply of microphone connecting box made out from CRC sheet
metal box duly powder coated paint,with 6 nos XLR panel mounting
socket & phono socket having the facility to connect the 6nos
microphone channel.
Supply of Professional Head phone(German Meastro/Sennheiser) Nos 1.00 7170.00 7170.00
Supply of Microphone cable XLR to XLR up to 10 Mtr(PLS) Nos 15.00 1265.00 18975.00
Supply of Microphone cable XLR to XLR up to 15 Mtr(PLS) Nos 15.00 1861.00 27915.00
Supply of Speaker connectin connector & MCB Box for Speaker etc Lot 1.00 63135.00 63135.00
Installation charges Job. 1.00 200000.00 200000.00
Proposal for Projection Auditorium Solutions
Hitachi CPX5022 Brightness 5000 Lumens with Standard Lens , Throw
distance 19.5Feet to 31.5 Feet ,Screen Size 8x13 minimum size. Nos 1.00 241821.00 241821.00
Warranty 5 Years.
Motorized Projection Screen with Remote Control, Matt White Draper
Fabric, Size 12x9 Feet. Warranty 5 Years
HDMI to CAT6 Transmitter & Receiver with HDMI to CAT 6 Ports upto
150 Mtrs at Stage to Contro, Room with Audio, Warranty 5 Years.
Multimedia Switcher HDMI at Control Room Switcher 4 Input 1 Output
with Audio oUtput
Supply of cat 6 cable stage to contro room (Amp /Belden) Mtr 280.00 68.00 19040.00
Cables & Connectors HDMI,CAT6 & Power ,Warranty 5 Years Nos 1.00 29781.00 29781.00
Ceiling Mount Kit , Warranty 5 Years Nos 1.00 4355.00 4355.00
Installation & Commissioning Nos 1.00 58438.00 58438.00
SITE DEVELOPMENT WORK
A COST OF BITUMINOUS ROAD
Preparation and consolidation of sub grade with power road roller of 8
to 12 tonne capacity after excavating earth to an average of 22.5 cm
1 depth, dressing to camber and consolidating with road roller including Sqm 192.50 190.17 36607.73
making good the undulations etc. and re-rolling the sub grade and
disposal of surplus earthwith lead upto 50 metres.
Supplying and stacking at site.
90 mm to 45 mm size stone aggregate
3 Supplying and stacking at site cum 12.25 1711.57 20966.73
63 mm to 45 mm size stone aggregate
Laying, spreading and compacting stone aggregate of specified sizes
to WBM pecifications in uniform thickness, hand picking, rolling with 3
wheeled road/vibratory roller 8-10 tonne capacity in stages to proper
grade and camber, applying and brooming requisite type of screening
/ binding material to fill up interstices of coarse aggregate, watering
and compacting to the required densi
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Laying, spreading and compacting stone aggregate of specified sizes
to WBM pecifications in uniform thickness, hand picking, rolling with 3
wheeled road/vibratory roller 8-10 tonne capacity in stages to proper
grade and camber, applying and brooming requisite type of screening
/ binding material to fill up interstices of coarse aggregate, watering
and compacting to the required densi
Supplying and stacking at site
Stone screening 13.2 mm nominal size (Type A)
Supplying and stacking at site
Stone screening 11.2 mm nominal size (Type B)
Supplying and stacking at site
Supplying and stacking at site
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone
chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and
52 kg and 56 kg of hot bitumen per cum of stone chippings
of 13.2 mm and 11.2 mm size respectively, including a tack coat with
10 hot straight run bitumen, including consolidation with road roller Sqm 122.50 239.17 29298.33
of 6 to 9 tonne capacity etc. complete (tack coat to be paid for
With paving Asphalt grade VG - 10 heated and then mixed with
solvent at the rate of 70 grams per kg of asphalt
Brick edging in full brick width and half brick depth including
excavation, refilling and disposal of surplus earth lead upto 50 metres.
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
Providing and applying tack coat using hot straight run bitumen of
grade VG - 10, including heating the bitumen, spraying the bitumen
12 with mechanically operated spray unit fitted on bitumen boiler, Sqm 122.50 47.62 5833.45
cleaning and preparing the existing road surface as per specifications :
On W.B.M. @ 0.75 Kg / sqm
Providing and laying seal coat of premixed fine aggregate ( passing
2.36 mm and retained on 180 micron sieve) with bitumen using 128
13 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and Sqm 122.50 84.13 10305.93
0.60 cum of fine aggregate per 100 sqm of road surface, including
rolling and finishing with road roller all complete
Excavating, supplying and filling of local earth (including royalty) by
mechanical transport upto a lead of 5km also including ramming and
watering of the earth in layers not exceeding 20 cm in trenches,
plinth, sides of foundation etc. complete.
B CONSTRUCTION OF PATHWAY
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30cm in depth. 1.5 m in width
1. as well as 10 sqm on plan) including disposal of excavated earth, lead
upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly
all kinds of soil Cum 40.97 216.46 8867.45
Providing and laying in position cement concrete of specified grade
2 excluding the cost of centering and shuttering. All work upto plinth
1:5:10 (1 cement : 5 course bound: 10 graded stone aggregate
40mm nominal size)
Providing and laying 60mm thick faciory made cement concrete
interlocking paver block of M -30 grade made by block making
machine with strong vibratory compaction, of approved s;ze, design &
shape, laid in required colour and pattern over and including 50mm
thick compacted bed of coarse sand, filling the joints with line sand
etc. all complete as per the direction of Engineer-in-charge.
Providing and laying at or near ground level factory made kerb stone
of M-25 grade cement concrete in position to the required line, level
and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), ncluding making joints with or without grooves (thickness of
4 joints except at sharp curve shall not to more than 5mm), including Cum 29.26 9075.24 265552.87
making drainage opening wherever required complete etc. as per
direction of Engineer-in-charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be approved by
Engineer-in-charge).
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :
Two or more coats on new work over an under coat of suitable shade
with ordinary paint of approved brand and manufacture
Excavating, supplying and filling of local earth (including royalty) by
mechanical transport upto a lead of 5km also including ramming and
6 watering of the earth in layers not exceeding 20 cm in trenches, Cum 117.05 388.41 45461.45
sides of foundation etc. complete.
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of oundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift upto 1.5 m.
Centering and shuttering including strutting, propping etc. and
removal of form for all heights :
a Foundations, footings, bases of columns, etc. for mass concrete. Sqm 69.36 324.46 22504.55
C SEPTIC TANK (100 USER'S)Size of Tank = 5.70 X 2.10 X 1.70 Mtr
Excavation work by mechanical means (Hydraulic excavator)/ manual
means in foundation trenches or drains (not exceeding 1.5m in width
1 or 10 sqm on plan), including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soils as directed, within a lead of 50 m.
1.A all kinds soil cum 97.85 302.23 29573.21
Excavation work by mechanical means (Hydraulic excavator)/ manual
means in foundation trenches or drains (not exceeding 1.5m in width
2 or 10 sqm on plan), including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including getting out the excavated soil and
disposal of surplus excavated soils as directed, within a lead of 50 m.
2.A Earth work in Excavation 1.50-3.00 mtr
all kinds soil Cum 19.57 110.10 2154.66
ordinary rock Cum 19.57 197.44 3863.90
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift up to 1.5 m.
Providing and laying in position cement concrete of specified grade
4 excluding the cost of centering and shuttering - All work up to plinth
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone
aggregate 40 mm nominal size).
Providing and laying in position machine batched and machine mixed
design mix M-25 grade cement concrete for reinforced cement
concrete work, using cement content as per approved design mix,
including pumping of concrete to site of laying but excluding the cost
of centering, shuttering, finishing and reinforcement, including
5 admixtures in recommended proportions as per IS: 9103 to Cum 15.72 9149.25 143826.21
accelerate, retard setting of concrete, improve workability without
impairing strength and durability as per direction of Engineer-in-
charge.“(Note :- Cement content considered in this item is @ 330
kg/cum.“Excess/ less cement used as per design mix is
payable/recoverable separately).
Centering and shuttering including strutting, propping etc. and
removal of form for:
Foundations, footings, bases of columns, etc. for mass concrete. Sqm 94.59 324.46 30690.67
7 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 5.42 640.96 3474.00
8 Suspended floors, roofs, landings, balconies and access platform. Sqm 11.97 807.64 9667.45
9 Edges of slabs and breaks in floors and walls. Mtr 17.11 191.65 3279.13
Reinforcement for R.C.C. work including straightening, cutting,
bending, placing in position and binding all complete.
Thermo-Mechanically Treated bars. Kg 1572.00 94.46 148491.12
52 mm thick cement concrete flooring with concrete hardener topping
under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) and top layer
12mm thick cement hardener consisting of mix 1:2 (1 cement
hardener mix : 2 graded stone aggregate 6mm nominal size) by
volume. Hardening compound is mixed @ 2 litre per 50kg of cement or
as per manufactures specifications. This includes cost of cement
slurry, but excluding the cost of nosing of steps etc. complete.
12 6 mm cement plaster on rough side of single or half brick wall of mix:
Providing and fixing in position pre-cast R.C.C. manhole cover and
frame of required shape and approved quality
Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910 on 12mm dia steel bar conforming to
IS : 1786 having minimum cross section as 23 mmx25mm and over all
minimum length 263 mm and width as 165mm with minimum 112 mm
space between protruded legs having 2 mm tread on top surface by
ribbing or chequering besides necessary and adequate anchoring
14 projections on tail length on 138 mm as per standard drawing and Nos 12.00 513.21 6158.52
suitable to with stand the bend test and chemical resistance test as
per specifications and having manufacture’s permanent identification
mark to be visible even after fixing, including fixing in manholes with
30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand
: 6 graded stone aggregate 20 mm nominal size) complete as per
Providing and fixing soil, waste and vent pipes,100 mm
15 dia.Centrifugally cast (spun) iron socketed pipe as per IS: 3989.Inlet Mtr 7.43 1135.15 8434.16
+ outlet,Vent Pipe
Providing and fixing terminal guard :100 mm(Sand cast iron S&S as
S.N. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry
brick honey comb shaft with bricks of class designation 75 and S.W.
drain pipe 100 mm diameter, 1.8m long complete as per standard
design.With F.P.S. bricks
D CUTTING & FILLING
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means over areas (exceeding 30cm in depth. 1.5 m in width
1 as well as 10 sqm on plan) including disposal of excavated earth, lead
upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly
Quantity =100% of total cutting (all kinds of soil) cum 139.32 216.46 30157.21
Excavating, supplying and filling of local earth (including royalty)by
mechanical transport upto a lead of 5km also including ramming and
watering of the earth in layers not exceeding 20 cm in trenches,
plinth, sides of foundation etc. complete.
E APROAN DRAIN
Earth work in excavation by mechanical means (Hydraulic
excavator)/manual means over areas (exceeding 30 cm in depth, 1.5
1 m in width as well as 10 sqm on plan) including getting out and
disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as
directed by Engineer-in-charge.
all kinds of soil cum 60.00 216.46 12987.60
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth:
consolidating each deposited layer by ramming and watering, lead up
to 50 m and lift up to 1.5 m.
Providing and laying in position cement concrete of specified grade
3 excluding the cost of centering and shttering - All work up to plinth
1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone
aggregate 40 mm nominal size).
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural
4 sources : 4 graded stone aggregate 40 mm nominal size derived from cum 5.87 7614.31 44680.77
natural sources)
Centering and shuttering including strutting, propping etc. and
removal of form for all heights :
Foundations, footings, bases of columns, etc. for mass concrete Sqm 39.12 324.46 12692.88
Brick work with F.P.S. bricks of class designation 75 in foundation and
Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 13.69 7015.13 96051.16
12 mm cement plaster finished with a floating coat of neat cement of
F STONE PITCHING
Supplying and stacking of hard stone (for stone pitching) 22.5 cm
Dry stone pitching 22.5 cm thick laid in courses and required profile
with hammer dressed stones having no side less than 15 cm, with
minimum depth of 20 cm including preparing the bedding surface etc.
all complete. (Payment for Stone to be made separately).
75 mm thick back filling for pitching including supplying of required
3 materials and consolidation etc. complete with :Stone aggregate 40 Sqm 879.64 176.21 155001.36
mm nominal size
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5 m
in width or 10 sqm on plan), including dressing of sides and ramming
of bottoms, lift upto 1.5 m, including getting out the excavated soil
and disposal of surplus excavated soil as directed, within a lead of 50
m.All kinds of soil.
Providing and laying in position cement concrete of specified grade
5 excluding the cost of centering and shuttering - All work up to plinth
1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40
mm nominal size).
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm
Random rubble masonry with hard stone in foundation and plinth
including levelling up with cement concrete 1:6:12 (1 cement : 6
coarse sand : 12 graded stone aggregate 20 mm nominal size) at
plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand )
15 mm cement plaster 1:3 (1 cement : 3 coarse sand) on rough side
of single or half brick wall finished with a floating coat of neat cement.
TOTAL AMOUNT 70736070.43
TOTAL AMOUNT 70736070.43
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NITDHE.pdf
Tender Document
BOQPDF.pdf
Tender Document
GCC.pdf
Tender Document
Signed IP.PDF
Tender Document
MAKE LIST.pdf
Tender Document
DrawingsDHE.pdf
Tender Document
Physical Milestone.pdf
Tender Document
Amendment05.pdf
Tender Document
addendum-c81300fdc92d-Dhenkanal.pdf
pdf • 0.22 MB
corrigendum-1765-Corrigendum01Dhenkanal.pdf
pdf • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .