PROVN OF PUMP HOUSE, OH TANK AND ADDITION/ ALTERATION/ AUGMENTATION OF WATER SUPPLY SYSTEM AT BABINA CANTT

Amount

Note:-(i) Please refer schedule 'A' notes before quoting the tender. (ii) Amount of Schedule of credit shall be deducted off line by the department.

GENERAL SUMMARY

Lump sum price worked out by the contractor for BUILDING WORK - PUMP HOUSE, OH TANK & UG SUMP as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part- III (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for ELETRIC SUPPLY as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)

Lump sum price worked out by the contractor for EXACAVATION & EARTH WORK as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)

MISCELLANEOUS (PART-VII) INTERNAL ELETRIFICATION NOTE:- For items of internal Electrifications notes given at the beginning of Sch ‘A’ Part-III (Internal Electrification) shall also be applicable.

M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No., drawn in and including medium grade, rigid PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), in mild steel/pressed steel sunken boxes( with earth dolly) with and including of 03mm thick bakelite, laminated hylem sheet top cover of suitable size for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for:-

One light point controlled by one 5/6 amps one way switch

One fan/exhaust point controlled by one 5/6 amps one way switch

One Socket outlet, three/five pin, 5 Amp, controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. on independent board

M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper FRLS conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No., drawn in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with and including MS/pressed steel sunken box (with earth dolly) with and including 03mm bakelite, laminated hylem sheet top cover of suitable size, including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 3/5 pin amps 15/16 Amp socket outlet independent complete all as specified and directed.

S&F MCB, SPN, 32 Amps, C type, 220 volts, AC, breaking capacity 10KA conforming to IS:13947-3 and IEC-60947-3:2001 complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, C type, 220 volts, AC breaking capacity 10 kA conforming to IS:13947-3 and IEC-60947-3:2001 complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover with handle of 8 mm dia bar, charcoal/salt, funnel with wire mesh etc complete all as specified and directed. [Qty- 1 (Int electric) + 2 (Ext Water supply)] NOTE :- (i) The concrete pit (to be provided atleast 500mm away from earth pit) shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe light grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M.

EXTERNAL WATER SUPPLY NOTE:- For items of External Water Supply notes given at the beginning of Sch ‘A’ Part-IV (External Water Supply) shall also be applicable.

M&L for road cutting depth up to 1.5 mtr below the normal ground level to lay pipe line upto 300 mm dia across the road in horizontal position and making good the disturbed portion to match with the existing surfaces including returning filling with approved excavated earth complete all as specified and directed.

Supply, laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffiremed - 2005 Edition 4.1 of 300mm bore suitable for "push on joints" in standard working lengths supplied with rubber gasket duly ISI marked for water supply, class K-9 with socket and with cement mortar lining inside the metalic zinc coating with finishing layer of bituminous paint on outside the pipe without polythelene sleeves but including "Push on joint" supplied with ISI marked EPDM rubber gasket conforming to IS-5382-1985 (Reaffirmed - 2003) with dual hardness of type -2 (bulb) and type -5 (Heel) quality laid in trenches complete all as specified and directed.

All as per BOQ Serial Item No.4.02 above but 250 mm bore complete all as specified and directed.

All as per BOQ Serial Item No.4.02 above but 200 mm bore complete all as specified and directed.

All as per BOQ Serial Item No.4.02 above but 150 mm bore complete all as specified and directed.

All as per BOQ Serial Item No.4.02 above but 100 mm bore complete all as specified and directed.

M&L for construction of Valve pit of size 1050mm x 1050mm x 900mm (internal dimensions), stone masonry construction, including all necessary excavation and earth work in any type of soil, returning filling, disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate), PCC copings in PCC(1:2:4), type B0 (using 12.5m crushed graded aggregate), brick masonry in cement mortar (1:4); rendering12 mm thick in cement mortar (1:4) internally, finished even and fair and pointing flush externally as the work proceeds in the same mortar; Mild steel angle iron 50 x 50 x 6mm frame, MS sheet cover 3.15mm thick with handle and locking arrangment, painting all the exposed MS work with two coats of synthetic enamel paint of tint as approved by the GE over a coat of red oxide primer and painting all the MS embedded in PCC with two coats of black bituminous paint etc. complete all as shown on drawings No.CEBZ/TD/43/2011 complete all as specified and directed. Note:- All Excavations, returning filling and removing of surplus soil is deemed to be included in the unit rate.

All as per BOQ Serial Item No.4.06 above but internal size 950mm x 950mm x 600mm complete all as specified and directed.

S&F Cast iron 50 mm bore air release valve, double chamber, as per IS 14845 including mounting GI pipe and clamps as per requirement at site suitable for 150 to 300mm bore cast iron pipe/ ductile iron pipe including all fittings washer, nuts & bolt etc complete all as specified and directed.

S&F cast iron foot valve of 200 mm size with flanged end IS-4038 including necessary rubber gasket, MS nuts, bolts, washers, etc of suitable size complete all as specified and directed.

S&F 300 mm bore non return valve both end flanged suitable for cast iron pipe including all fittings, washer, nuts & bolt, etc complete all as specified and directed.

All as per BOQ Serial Item No.4.10 above but 200 mm bore complete all as specified and directed.

All as per BOQ Serial Item No.4.10 above but 80 mm bore complete all as specified and directed.

S&F cast iron sluice valve of 300 mm bore class PN-1.6, ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing, etc complete all as specified and directed. Note:- Any damage made to pipe lines, over head reservoir while replacing the sluice valve will be repaired by contractor on his own cost.

All as per BOQ Serial Item No.4.12 above but Motorised Sluice Valve of 300mm bore; compatible to SCADA system and having RS485 or other communication port complete all as specified and directed

S&F cast iron sluice valve of 250 mm bore class PN-1.6, ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing, etc complete all as specified and directed. Note:- Any damage made to pipe lines, over head reservoir while replacing the sluice valve will be repaired by contractor on his own cost.

All as per BOQ Serial Item No.4.13 above but Motorised Sluice Valve of 250mm bore; compatible to SCADA system and having RS485 or other communication port complete all as specified and directed

Supply, install, testing and comissioning manufacturer's factory assembled and tested, electric motor driven pump set not less than 40HP, comprising of heavy duty, horizontally split casing type, multi stage Centrifugal pump, cast iron body with bronze impeller, casing ring, sleeves, etc coupled to electric motor of suitable capacity by means of flexible coupling and mounted on a common fabricated MS based frame with anti-vibration pads 6 numbers, the scope of work also includes the foundation of pump ser (as per manufacturer's recommendations including PCC foundation, MS bolts with nuts and anti-vibrating pads) with & including the follwing complete all as specified and directed:-

BOQ Serial Item No.4.14 (i) Pump capable of delivering 1200 litres per minute at 60 meter head coupled throughflexible coupling to TEFC squirrel cage induction motor 1500 RPM (Synchronous speed) of capacity as recommended by manufacturer. (ii) Fulyl automatic star delta starter of capacity 40HP including starter volt meter panel board for mounting of starter, ampere meter, volt meter, CTs, etc fuse and contractor of suitable capacity & necessary wiring, etc; starter panel board shall be indoor type, floor mounted made of 2mm thick CRCA MS sheet duly powder coated and includingconnecting cable of PVC insulated copper conductor of size 25sqmm, single core from starter to motor.

S&F for cast Iron (CI) fittings, heavy duty with spigot and socketed /flanged joints; such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (sockets or socket and spigot or flanged ends as per site requirement) collars, caps and plugs etc suitable for up to 300mm dia pipe complete all as specified and directed.

S&F for Ductile Iron (DI) fittings, class K-12, PN 1.0, such as Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (sockets or socket and spigot or flanged ends as per site requirement) collars, caps and plugs etc suitable for 80 to 300mm dia pipe complete all as specified and directed.

Supply, laying, connecting, jointing and testing DI pipe 300 mm bore, K-9 type with flanged ends including DI flange, thickness as per IS, centrifugally cast, class ‘B’, in any length, laid in trenches complete all as specified and directed.

Supply, laying, connecting, jointing and testing DI pipe 250 mm bore, K-9 type with flanged ends including DI flange, thickness as per IS, centrifugally cast, class ‘B’, in any length, laid in trenches complete all as specified and directed.

Supply, laying, connecting, jointing and testing DI pipe 200 mm bore, K-9 type with flanged ends including DI flange, thickness as per IS, centrifugally cast, class ‘B’, in any length, laid in trenches complete all as specified and directed.

ELECTRIC SUPPLY NOTE:- For items of Electric Supply notes given at the beginning of Sch ‘A’ Part-V (Electric Supply) shall also be applicable.

M&L for earthing complete with galvanised steel earth plate electrode of size 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.50 mtr below the ground level connected to galvanised iron strip of 32x6 mm as earth lead by means of bolts nuts check nuts & washers of galvanised iron or steel ,surrounded by charcoal of coke and salt, protected by GI pipe 40 mm bore (light grade), water pipe 20mm bore GI medium grade with funnel and wire mesh,and making chamber of PCC (1:4:8) type D-2 using 40 mm graded stone aggregate and coping shall be in PCC(1:3:6) type C-1 using 20 mm graded stone aggregate, 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bars @ 80 mm c/c boath ways including excavation and earth work in any type of soil and removal of surplus soil to distance n exc 50 m complete all shown in electrical plate No 3 of SSR part- 2010 and also including making test point for testing of earthing made out of gun metal or phosphorous bronge size 75x75x25 mm complete all as specified and directed. (For LT panel board - 02 Nos. & for LA - 02 Nos.) Note:- (i) The cost of GI earth lead & G I pipe of 7.50 mtr length for protection of GI wire and excavation work for pit shall deemed to be included in this item. (II) Earthing test will be carried out and if desired result not achieved, the earthing will be redone to achieve desired result without any extra payment.

S&F integral LED aviation light fitting comprising of aluminium housing with polycarbonate enclosure, IP65, Operating Input Voltage Range 100-270 V, AC,10 System wattage (W) @240 V complete all as specified and directed.

Design, supplying, installing, testing and commissioning LT panel board, Indoor type, double door, IP - 65 type panel board factory fabricated cubical type weather vermin proof with locking arrangement and made out of MS CRCA sheet 2.0 mm thick on angle iron frame of 25 x 25 x 5mm and legs made out of angle iron 36 x 36 x 6mm duly powder coated including necessary PCC foundation, common for both pump sets suitable to accomodate the following duly CPRI Approved:-

Dismantling / DEMOLITION

Dismantling & taking up of old cast iron pipe and connections for removal to store of size 300 mm bore complete all as specified and directed.

Dismantling & taking up of old cast iron pipe and connections for removal to store of size 250 mm bore complete all as specified and directed.

Dismantling & taking up of old cast iron pipe and connections for removal to store of size 200 mm bore complete all as specified and directed.

Dismantling & taking up of old cast iron pipe and connections for removal to store of size 150 mm bore complete all as specified and directed.

Dismantling & taking up of old cast iron pipe and connections for removal to store of size 100 mm bore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 100 mmbore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 80 mm bore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 50 mm bore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 40 mm bore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 25 mm bore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 20 mm bore complete all as specified and directed.

Dismantling & taking up of old GI pipe and connections, for removal to store of size 15 mm bore complete all as specified and directed.

Dismantling & taking up of old Non return valve for removal to store of size 300 mm bore complete all as specified and directed.

Dismantling & taking up of old Non return valve for removal to store of size 200 mm bore complete all as specified and directed.

Dismantling & taking up of old Non return valve for removal to store of size 80 mm bore complete all as specified and directed.

Dismantling & taking up of old sluice valve for removal to store of size 300 mm bore complete all as specified and directed.

Dismantling & taking up of old sluice valve for removal to store of size 250 mm bore complete all as specified and directed.

Dismantling & taking up of old sluice valve for removal to store of size 200 mm bore complete all as specified and directed.

Dismantling & taking up of old sluice valve for removal to store of size 150 mm bore complete all as specified and directed.

Dismantling & taking up of old sluice valve for removal to store of size 100 mm bore complete all as specified and directed.

Dismantling & taking up of old sluice valve for removal to store of size 80 mm bore complete all as specified and directed.

Dismantling & taking up of old gate valve for removal to store of size 50 mm bore complete all as specified and directed.

Dismantling & taking up of old gate valve for removal to store of size 40 mm bore complete all as specified and directed.

Dismantling & taking up of old gate valve for removal to store of size 25 mm bore complete all as specified and directed.

Dismantling & taking up of old gate valve for removal to store of size 20 mm bore complete all as specified and directed.

Dismantling & taking up of old gate valve for removal to store of size 15 mm bore complete all as specified and directed.

Dismantling & taking up of foot valve for removal to store of size 200 mm bore complete all as specified and directed.

Dismantling of valve pit, any size & type complete all as specified and directed.

PARAS BROTHERS

Mahaveer Engineering Co.

Raja enterprises

Banarsi Lal Ahuja

Mata Builders