REPAIR/MAINT OF BARBED WIRE/ CHAIN LING FENCING, BOUNDARY WALL, CULVER ETC UNDER AGE B/R-II , GE BABINA CANTT

Amount

Demolition of Brickwork or stone/ boulder masonry as in drain wall, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built cement mortar 1:6 complete all as specified and as directed.

M&L Brick work with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks as specified and directed.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L two coat of white wash on newly plastered surface and curing preparation of surface complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and as directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains complete all as specified and as directed.

M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone agg) in foundations, filling and mass concrete complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for machine pressed precast concept interlocking paver block of local make available any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment over 50 mm thick sand bed complete all as specified and as directed.

M&L for machine pressed precast concept interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment over 50 mm thick sand bed complete all as specified and as directed.

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bedding specified and directed by engr-in-charge.

M & L Chequered cement concrete tiles glossy finish 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bedding complete all as specified and directed

M&L for Vitrified Heavy duty tiles 30cm x 30cm x 10mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed

Taking down/Dismantling old existing unserviceable water storage tank(PVC/RCC) and of capacity n exc 500 ltrs etc complete all as specified and directed

Taking down/Dismantling old existing unserviceable water storage tank (PVC/RCC) and of capacity exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.

S&F of 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210 gms) complete all as specified and as directed.

Supply and fixing, jointing and testing in repair 15mm dia galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes , the rate also include cutting through walls floors complete all as specified and directed.

Supply and fixing, jointing and testing in repair 20mm dia galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings for the following sizes , the rate also include cutting through walls floors complete all as specified and directed.

S/F in repair of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20mm dia complete all as specified and directed.

S/F in repair of stop valves, cast copper alloy screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 15mm dia complete all as specified and directed.

Dismantling of existing RCC, wood, or steel fencing post embedded in concrete, brick work etc including taking out embedded portion of post in concrete and making good to disturbed ground complete all as specified and as directed .

Excavation in post holes (or similar holes) each not exc 0.5 cum , getting out in any type of soils and removing surplus soil to a distance not exc 50m complete all as specified and directed.

M & L for reinforced cement concrete design mix M-25 using 20mm graded stone aggregate as in columns, pillars, posts, strut etc a complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending spirally for hopping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M&L TMT bars 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders, binding with MS wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions in square/ rectangular rough finished surface of concrete complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F Galvanized two strands steel barbed wire 2.24 mm dia barbed with 2.00 mm dia barbs at 75 mm spacing and straining and fixing to any type of strandard rails straining bolts including securing or laying at crossing with and provn of galvanized mild steel wire staples are steel pins complete all as specified and directed.

M&L 40 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate)as in floor complete all as specified and as directed.

M&L Glass dividing strips , 3 mm thick , 38mm width complete all as specified and as directed.

M&L 75mm thick cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair complete all as specified and as directed.

Dismentling iron work in any description complete all as specified and directed

Supply and fixing chain link mild steel galvanised fencing of any size or type and all as specified and as directed by Engr-in-Charge.

S/F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long . Dia of neck 5 to 10 mm complete all as specified and directed by Engr-in-Charge.

S&F 10mm round bars and over as in stiffner to hold the chain link fencing fixed with angle iron post inclucinding necessary welding and fixing arrangement at ends complete all as specified and as directed .

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for prepariation of new or previously untreated steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc complete all as specified and as directed.

M/S M S Constructions

N K ENTERPRISES

DEVENDRA ENTERPRISES

M/s Hansraj Shivhare

M/s Ravi Traders

M/S PRAKASH RAIKWAR TRADERS AND CO

M/S Kharya Associates

FTH Traders