PDG. 11 KV ELECTRIC SUBSTATION INCLUDING HOT LINE FEEDER/ HT/ LT LINES IN THE CAMPUS OF CIVIL HOSPITAL AT SIRSA.

Amount

Schedule A. Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12 (C) . i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

iii) 250 amp. 415 V , 35 KA 3-phase.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21). xiv) Galvanized iron pipe 65 mm dia on flushed.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia.

(Q) Earthing (HSR 31.22). iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

viii) Supplying and laying of 25 mm x 5 mm G.I. Strip at 0.50 meter below ground level as strip earth electrode including soldering etc. as required .

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

xiv) Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.

Supply and erection of under ground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (HSR 31.25). xxv) 25 Sq. mm 3.5 Core Ard. Cable .

xxvii) 50 Sq. mm 3.5 Core Ard. Cable .

xxix) 95 Sq. mm 3.5 Core Ard. Cable .

xxxiii) 240 Sq. mm 3.5 Core Ard. Cable .

xxxv) 400 Sq. mm 3.5 Core Ard. Cable .

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxv) 25 Sq. mm 3.5 Core Ard. Cable .

xxvii) 50 Sq. mm 3.5 Core Ard. Cable .

xxix) 95 Sq. mm 3.5 Core Ard. Cable .

xxxiii) 240 Sq. mm 3.5 Core Ard. Cable .

xxxv) 400 Sq. mm 3.5 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable.(HSR 31.28). iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

vi) 240 Sqmm Cable 3 to 3.5 Core .

vii) 300 Sq mm to 400 Sqmm Cable 3 to 3.5 Core .

Street Light. (HSR 31.30): VI) Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. iii) 11 meters long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. buried 2.20 m in ground.

S/E of MS saddles and clamps on wall/ RCC parapet for fixing underground cable at a distance of 0.60 meter centre to centre fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect upto the Engineer-in-Charge of the work. (HSR 31.48)

Supply and erection of double walled corrugated HDPE pipe laid 1 meter below ground level including digging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe include the cost pf labour and material required to complete the job in all respect upto the entire satisfaction of engineer in charge. (HSr 31.67). ii) HDPE pipe 90/75 mm outer dia/inner Dia

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.69). vii) 4 Pole MCCB 300 amp to 400 amp.

S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in 1 meter below ground level with sand & bricks with all labour and material including digging and refilling of trench, required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.70). v) 120 sqmm 3 core XLPE cable

S/E of XLPE (E) 11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material including required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work..(HSR 31.71). 120 sqmm 3 core XLPE cable

Supply and erection of heat shrinkage type end termination jointing kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos. crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. (HSr 31.72). ii) Suitable for 70 to 120 sqmm 3 core XLPE Cable

Supply and erection of heat shrinkage type end termination jointing kit outdoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable/ ABC cable complete with all the kit contents including earth continuing connection along with 3 nos, crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. (HSr 31.73). ii) Suitable for 70 to 120 sqmm 3 core XLPE Cable

iv) Load Bank 8 way 400 Amp.

Non Schedule Items: Supply and erection of Rubber Mat 1mx2mmx 3mm thick suitable for 11/33 KVA as per IS No. 15652C/M/L 3017739 as per approved by Chief Electrical inspector, Govt. of Haryana

Non Schedule Items: Supply & erection of fire extinguisher ISI marked ABC type 6 Kg. Capacity powder base with square grip Gavle duly erected/hung on wall with hook including the cost of hook, screw etc. with all the labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-In-Charge of the work.(Make:- Safex/Ceasefire/ Minimax).

Non Schedule Items: Supply & Installation of CO2 type fire Extinguisher 4.5 KG capacity made from brand new seamless cylinder as per ISI mark IS: 7285 and CCE approval fitted with discharge hose and horne and squeeze grip /wheel type valve with initial charge as per IS 15683 : 2006 specification bearing ISI marks and EIL approved complete in all respect (Safex/ Minimax Make) with Three year warranty.

Non Schedule Items: S/E of fire bucket of G.I. sheet of 24 gauge write with " FIRE" as per fire specification.

Non Schedule Items: S/E of MS bucket stand suitable for six Nos. fire buckets (but without buckets) including the cost of welding & painting with all cost of red oxide and two coat of enameled paint of red colour completion all respect.

Non Schedule Items: Supply and erection of stay wire suitable for 9/11 M. long RCC pole make out of 7/8 SWG GI wire with U type MS rod 5/8" dia duly threaded by means of angle iron of size 50 mm x 6 mm x 30 cm and 6 ft. long MS rod 5/8" dia 5' buried in the ground after fixing with cross channel size 75 mm x 40 mm x 60 cm. The stay wire will be binded on the top of the pole with help of suitable size of double U type MS clamps and stay fixed with nuts& bolts. The stay wire shall be insulated in the middle point with the help of egg. Insulator and complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work.

Non Schedule Items: Supply and erection of 11 KV pin insulator with pin make with all labour and material required to complete the job including fixing the same on existing channels up to the entire satisfaction of Engineer-in- Charge of the work.

Non Schedule Items: Supply and erection of 11 KV gang operated switch make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H' pole with the help of 3 No. channels of size 75 mm x 40 mm x 6 mm, 1.8 M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 No. 11 KV insulator with GI pin R.D. fuses and painting with 2 coat of approved paint and one cost of red oxide and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of work.

Non Schedule Items: Supply and erection of 11 KV disk insulator with all labour and material required to complete the job including fixing the same on existing channels up to the entire satisfaction of Engineer-in- Charge of the work

Non Schedule Items: Supply and erection of lightening arrester module suitable for 11 KV G.O. switch with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.

Non Schedule Items: S/E angle iron, channel & clump with nut & bolts of various sizes required for made the platform & G.O. switch etc.

Non Schedule Items: Supply and erection of fencing of transfer for safety precaution made out with the help to 50 cm x 50 cm x 6 mm angle iron, M.S. plate 50 mm x 6 mm, M.S. Jaal the perportionate quantities required in 1 sqm duly painted with red enameled paint including one coat of red oxide. The fencing angle shall be embedded in ground with C.C. mixture at least 60 cm in ground level including all labour and material required to complete the job up to the entire satisfaction of Engineer-in-charge of the work.

Non Schedule Items: Supply, erection, testing & commissioning of 11 KV indoor H.T. Metering panel complete with CTs, PTs cubical and electronics meter with accuracy class 0.5 as per requirement / approved by HVPN Consisting of the following :- Cubical panel free standing floor mounting type made of sheet steel 14-G SWG CRCA sheet with channel iron base frame spray paintd with strong Synthetic grey channel paint as per size & design approved by HVPN. 3 Nos. 11 KV CTs of rating as approved by HVPN for indoor installation of approved make of HVPN. One No. 11 KV PT 11000/110 Volts 10 KA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of HVPN. Digital electronic meter 3 Phase 4 wires 0.5 accuracy for recording reading operating system for difference kind of readings. The cubical panel will be complete in all respect including interconnection, internal wiring with PVC copper cable its testing and approved of all items by HVPN including cost of all testing/approved charges of all items of HVPN including cost of all labour & material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge ofthe work.

Cement Concerete Platform For Transformer (Lum Sum )

Schedule B. For Shifting of Electrical Utilities:- New Materials : PCC POLE 11 MTR.

ACSR 100 MM2

MS CHANNEL T-Off 100X50X6 ,1600 MM,WT.15.296 Kg ( Galvanized)

MS Angle 50x50x6 2040 mm ( for supporting T Off) wt. 9.180 kg.( Galvanized)

MS CHANNEL X Arm 100X50X6 ,2200 MM,WT.21.32 Kg( Galvanized)

Channel T-Off 75x60x6 mm 2200 mm for fuse unit wt. 15.708( Galvanized)

Angle 50x50x6 2400 mm ( for earth wire) wt. 10.80 kg.( Galvanized)

Angle 50x50x6 2860 mm ( Bracing of H Pole) wt. 12.87 kg.( Galvanized)

Angle 50x50x6 2040 mm ( Belting of H Pole) wt. 9.180 kg.( Galvanized)

Half Clamps Wt. 1.47 Kg.( Galvanized)

Full Clamps wt. 2.325 Kg.( Galvanized)

Nuts & Bolts Off Sizes

11 KV PIN INSULATOR WITH PIN POLYMERIC

11 KV Disc INSULATOR WITH PIN POLYMERIC

Stay Wire / GSS Wire 7/8 SWG

Stay Set Complete ( GI Rod 20 mm Dia 8' + MS X - plate 460 mm of L 65x65x6 mm+ GI Elbow & Nut wt. 2.240 kg.)

11 KV XLPE Cable 3cx185 mm2

11 KV O/D CABLE BOX 185MM2

11 KV I/D CABLE BOX 185MM2

11 KV G.O Switch 11 mtr Pole

HT Meter -/5 amp.

11 KV Pilfer resistant Metering Cubicle Box

11 KV VCB Pannel rating 400 Amps. For O/G Panel

G S L 8 SWG

G.I Strip 25x6 mm 9 mtr. For earthing wt. 10.80 kg.

G.I Pipe 40 mm dia 6 mtr. Long for earthing set B class

Salt for earthing

Coal for earthing

ALL. THIMBLE OFF Sizes

NUMBER PLATE with clamp

DANGER PLATE with clamp

BARBED WIRE

Wooden Cleat

PVC Tape

Empire Tape

LIGHTNING ARRESTOR 9KA 10 KV Heavy duty

C: Errection of materials as per specifications of DHBVN complete in all respect upto the entire satisfaction of the Engineer in Charge of work.

E/O XLPE Cable 3cx185 mm2

E/O H Pole 11 mtr. With 2 Stay

E/O PCC Pole 11 mtr.

E/O Cable Box I/D

E/O Cable Box O/D E/O G.O Swtich E/O LA 9 KV 10 KV Heavy Duty

E/O Earth Boaring 20' Deep(20x10=200')

E/O HTCT Meter with CT, PT

E/O 11 KV VCB

M R CONSTRUCTION COMPANY

M/s JSB Enterprises

J.B.S.Electrical Co.

HINDUSTAN VIDYUT UDYOG

Ecs Engineering Chd. Pvt. Ltd.