Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC RAM SHIV COLONY GALI NO 2 NAIKA CHATNAG ROAD JHUNSI PRAYAGRAJ UP 211019 | PRAYAGRAJ | UTTAR PRADESH | 211019 | L1 | Accepted-AOC L1 | |
| 2 | L2₹42.9 L+₹4.1 L (10.4%)Rejected-Finance VILL CHOMON ADAMPUR JALANDHAR PUNJAB 144103 UDYAM PB 10 0011450 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance L2 | |
| 3 | L3₹54.0 L+₹15.1 L (39.0%)Rejected-Finance | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | TARA ENTERPRISES L1 | M/s Sahib and Company L2 | R K ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Material and labour for taking out U/S Non Clog Submersible motor pump assy 5 HP to 7.5 HP, 3 phase, 50 Hz with column pipe/discharge pipe from 10 to 13m deep well with the help of tripod, chain pully block, Hydra of suitable capacity by disconnecting electric connections and discharge pipe and transporting the same to workshop for opening, dismantling and cutting of old burnt winding wire of motor and rewinding of motor with copper winding wire as per existing size, replacement of Insulation material, oil seal, ball bearing, change of oil seal and making necessary connections with existing copper lead with sleeves from motor to connection plate, cleaning of impeller housing, greasing to all moving parts, bearing and reassembling the motor, Shifting to site back, making joints, electric connection and refitting with delivery pipe, lowering to sump well with the help of tripod/any other machinery such as hydra, connecting, commissioning and testing on full load complete including replacement of worn out nut bolts or any minor parts required to make motor pump assy serviceable all as specified and as directed by Engineer-in-Charge
(i) The quoted rate include the cost of any arrangement of T&P, chain pully block/ hydra (if reqd), required man power, iron clamp or any other item equipment. No extra claim of contractor will be entertained in this regard.
(ii) The contractor shall have to take out the motor pump assy within 10 hrs from intimation to contractor by JE. Further, the motor shall be installed within 72 hrs from time of intimation. A penalty of Rs 250/- per hr shall be levied on account of delay on any of above condition mentioned | 8 | Each Job | 14,500 ₹1,16,000 Lowest | 30,000 ₹2,40,000 | 16,000 ₹1,28,000 |
| 2.00 | Ditto all as per Srl Item No. 1.00 above, but of Capacity 10 to 15 HP complete | 4 | Each Job | 10,000 ₹40,000 Lowest | 64,000 ₹2,56,000 | 19,000 ₹76,000 |
| 3.00 | Ditto all as per Srl Item No. 1.00 above, but of Capacity 15 to 25 HP complete | 2 | Each Job | 10,000 ₹20,000 Lowest | 86,500 ₹1,73,000 | 25,000 ₹50,000 |
| 4.00 | Ditto all as per Srl Item No. 1.00 above, but of Capacity 0.5 to 3 HP complete | 2 | Each Job | 3,000 ₹6,000 Lowest | 10,000 ₹20,000 | 7,500 ₹15,000 |
| 5.00 | Ditto all as per Srl Item No. 1.00 above, but of Capacity 80 HP complete | 2 | Each Job | 65,000 ₹1,30,000 | 2,47,000 ₹4,94,000 | 58,000 ₹1,16,000 Lowest |
| 6.00 | M&L for removing rewinding and refixing of induction motors 5 -15HP NOn clog Centrifugal Pump, opening of motor,cutting removing old burnt winding coils ,cleaning filling the starter slots necessary mechanical works for shaft/bearing housing , rewinding with suitable gauge of super enamelled copper conductor including winding with fibre cloth/PVC insulated winding paper, superior quality varnishing, servicing of ball bearings, two coats of synthetic enamel spray painting, suitable main connections from coil to tterminal box,preparing and inserting coil running/starting winding interconnecting, fixing, soldering, jointing, heating, drying up coils, connection at site, to and fro transportation, testing at site and satisfactorily running all as specified and as directed | 2 | Each Job | 10,000 ₹20,000 | 55,000 ₹1,10,000 | 9,500 ₹19,000 Lowest |
| 7.00 | M&L for removing rewinding and refixing of induction motors 0.5-3 HP NOn clog Centrifugal Pump, opening of motor,cutting removing old burnt winding coils ,cleaning filling the starter slots necessary mechanical works for shaft/bearing housing , rewinding with suitable gauge of super enamelled copper conductor including winding with fibre cloth/PVC insulated winding paper, superior quality varnishing, servicing of ball bearings, two coats of synthetic enamel spray painting, suitable main connections from coil to tterminal box,preparing and inserting coil running/starting winding interconnecting, fixing, soldering, jointing, heating, drying up coils, connection at site, to and fro transportation, testing at site and satisfactorily running all as specified and as directed | 2 | Each Job | 4,000 ₹8,000 | 10,000 ₹20,000 | 3,500 ₹7,000 Lowest |
| 8.00 | Supply and fixing in repair fully Automatic Star Delta Starter for Submersible Pump including voltmeter with selector switch, Ammeter with selector switch, MCB/connector (for incomer), indicating lamp , Start & stop Push button, overload relay range 120-145A, Single phase preventer, 3 pole contactors -03 Nos for Capacity 80HP 415 Volts, 50 Hz 3 Phase complete all as specified and as directed. | 1 | Each Job | 75,000 ₹75,000 Lowest | 85,000 ₹85,000 | 1,65,000 ₹1,65,000 |
| 9.00 | Supply and fixing in repair fully Automatic Star Delta Starter for Submersible Pump including voltmeter with selector switch, Ammeter with selector switch, MCB/connector (for incomer), indicating lamp , Start & stop Push button, overload relay range 20-33A, Single phase preventer, 3 pole contactors -03 Nos for Capacity 15HP 415 Volts, 50 Hz 3 Phase complete all as specified and as directed. | 1 | Each | 15,000 ₹15,000 Lowest | 20,000 ₹20,000 | 28,000 ₹28,000 |
| 10.00 | S&F and connecting in replacement direct on line (DOL) , 415 Volts, 3 phase AC including single phase protection complete suitable for electric motor capacity 5 to 15 HP complete all as specified and as directed. | 2 | Each | 3,000 ₹6,000 Lowest | 17,500 ₹35,000 | 6,500 ₹13,000 |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
12 Sept 2025, 6:00 pmClosed
Garrison Engineer (East) JRC
Garrison Engineer (East) JRC
CLEANING AND REPAIR TO SEWAGE/ STP INSTALLATION, PUMP SETS AND CERTAIN E/M REPAIR WORKS UNDER GE (EAST) JRC
2025_MES_726194_1
GE/JUL/ET-48/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
273 days
Garrison Engineer (East) JRC
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) JRC
₹99,000
Yes
17 Oct 2025
14 Aug 2025
19 Sept 2025
14 Aug 2025
12 Sept 2025
28 Aug 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .