CERTAIN REPAIR WORK TO WOODEN AND STEEL FURNITURE ALONGWITH POLISHING, RECANNING, DENTING AND PAINTING UNDER BSO OF GE (WEST) PATHANKOT

Amount

Removing damaged/unserviceable parts of Chair dinning and supply & fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol. Any parsts loose of chair also to be tightened tight by using fevicol and providing 8 nos triangular wooden brackets. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD-16, FD-228, FD-279) Front Leg of Chair dinning

Rear Leg of Chair dinning

Back rest of Chair dinning

Stiffner of Chair dinning

Rear and side rails and make holes for canning as shown in drg

Removing damaged/unserviceable parts of Chair writing and supply and fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol. Any parsts loose of chair also to be tightened tight by using fevicol incl providing 8 nos wooden brackets of triangular shape. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD -20, FD-202, FD-250, FD-280) Front leg

Rear Leg

Back Rest

Stiffner

Hand rest

Front/rear/side rail and make holes for cannin

Removing damaged/unserviceable parts of chairs easy and supply and fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol. Any parsts loose of chair also to be tightened tight by using fevicol incl providing 8 nos wooden brackets triangular shape. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD-17, FD-201, FD-229 etc) Front / Rear Leg

Hand rest

Front/rear/side rails and make holes for canning

Back frame except back rest

Back rest

Stiffener of size 50 x 25 mm under seat of the chair easy as shown in drawing

Chair dinning cushioned/ Chair dinning Offr (Drg no. FD/E6/MAP/10 etc) Removing of U/S Front leg and S & F new front leg made out of teak wood size all as per drg and directly Engr-in- Charge

Removing of U/S rear leg S & F new rear leg made out of teak wood size all as per drg and directly Engr-in- Charge

Removing of U/S Side rails /Front rails/ Rear rails of S & F of New Side rails/ Front rails rear rails made out of teak wood size all as per drawing and directed by Engr-in-Charge

Removing of U/S Back verticle stiffener size 30 x 15 mm and S & F new back verticle stiffener size 30 x15mm made out of teak wood all as per drawing and directed by Engr-in-Charge

Removing of U/S Stiffener size 20x15mm and S & F New Stiffener size 20 x15 mm made out of teak wood all as per drg.

Removing of U/S Cushing material/Tapestry coth and Ply wood seat of chair dinning cushioned and S&F New seat made from ply wood 12mm thick 5 ply and upholstringof chair with new tapestry cloth of Min Price range of Rs 150/Per Mtr of approved shade with foam sheet 75mm thick 40 Density all as per drawing.

Supply of Cushion for Dressing Stool of size 420x260x50mm thick of 40 density duly upholistered with tapestry cloth of price not less to 200 per Mtr shade quaility of father foam complete all as specified and directed. (Drg No. FD/E6/MAP/14 etc)

Removing damaged/unserviceable Cane plastic from wooden furniture and material and Labour for recanning with Cane 2mm wide cane (colour of white/ivory) as per godrej pattern all as specified shown on drawing and and border of 4mm thick cane of similar colour rest as directed. Make of cane , Shah Brand, primier, maharastra Cane) Rest all as per the direction of Engr-in-Charge. (Drg No. FD-16,17, 20, 56, 201, 202, 228, 229, 250, 279, 280, 27, 282)

BED HARD :- S&F of 12mm thick ply wood commerical 6ply (single piece) after removing old damaged / sagged ply. Ply wood shall be fixed with proper worksmen ship to be properly fixed in the longrails and short rails complete all as specified and as per the direction of Engr-in-Charge. (Drg no. FD 246)

S&F long rail of bed of size 75x50x1980mm made out of 1st class teak wood duly wrought and ends slightly rounded off, made to shape including taking out the old broken/cracked raill all as shown on drawing and all as directed.

S&F stiffeners of size 40x50x900mm made out of Ist class teak wood, duly wrought made to shape including taking out the broken/okd stiffeners all as specified and directed

S&F in position head rest including legs made out of well seasoned Ist class teak wood frame, supply and fixing 4mm thick plywood one side teak faced on the frame including taking out the old broken/decayed head rest all as specified and directed

S&F in position foot rest including legs made out of well seasoned Ist class teak wood frame, supply & fixing 4mm thick ply wood one side teak faced on side of the frame including taking out the old broken/decayed foot rest all as specified and as directed

M&L for French polishing of bed after cleaing the surfaces (old or new) with sand/empty paper refiling the borer holes/cracks with putty (wherever required) applying the raw sienna/burnt sienna as per requirement, make the surface smooth again with sand/empty paper to the entire satisfaction of Engr-in-charge.

CHAIR WRITING MAP & FD (Drg no. FD/E 6/MAP/12 & FD-1107) S&F of seats of chair cushioned writing after removing old damaged or wornout seats with cushion of 28 (d) to 32 (d) as per requirement and tapestery cloth of approved pattern from Engr in charge

S&F of backs of chair cushioned writing after removing old damaged or wornout seats with cushion of 28 (d) to 32 (d) as per requirement and tapestery cloth of approved pattern from engr in charge.

S&F front leg sheesham wood 1st class with bamboo pins and fevicol by making tenon/groove, joints of specified aize and section duly planed on all sides all as shown on drawing.

All as per Srl item No. 8.03 here-in-before but rear leg

S & F box complete box of table dressing gents with drawers and knobs made out of 18mm thick PPB Teak shade all as per drg after removing old damaged box.

TABLE DRESSING LADIES (Drg no. FD-32, FD-251 etc) M & L for providing following partrs of Table Dressing Ladies including removing of old unsv parts complete all as spfd and as directed by Engr-in-Charge including french polishing :-

S&F complete Box for Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick PPB exterior grade melamine faced with drawers. ISI marked with and including aluminium channel 12mm x 22mm all round complete.

TABLE WRITING (Drg no. FD-33/ 249 etc) S&F following parts of the table writing:-

Table top of size 1200mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified and directed.

Replacement of Leg with teak wood (Seasoned, without cracks, joints)

Replacement of side rail with teak wood (Seasoned, without cracks, joints)

Replacement of Stiffener with teak wood (Seasoned, without cracks, joints)

TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (Drg no. FD-42, 55 & 231 etc) S&F for providing following parts including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or rear rail

Side rail

Stiffener

Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

Drawer with lock complete as per drg as directed

TABLE DINNING FOR 6 PERSONS (Drg no. FD-273 FD239 FD-1115 etc)

Table top of size 1500mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including POLISHED beading 4mm x 18mm all round complete.

Front or Rear rail

Side rail

TEAPOY (Drg no. FD-034, FD-278, FD232 etc) S&F for providing following parts of Teapoy including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or Rear leg

Front or Rear rail

Side rail

Top of size 600mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete.

TABLE PEG (Drg no. FD-25, FD-277, FD-236 etc) S&F for providing following parts of Table Peg including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :- :-

Side rail

Table Top of size 450mm x 300mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete.

Front or Rear rail

TABLE CENTRE (Drg no. FD-292/ 352/ 74 etc) S&F for providing following parts of Table Centre including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or Rear leg

Front or rear or side rail

Table Top of size 900mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete.

TABLE 900MM X 900MM X 760MM (Drg no. FD-88) S&F for providing following parts of table 900mm x 900mmm x 760mm including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :-

Table top of size 900mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

S&F leg made out of sheesham wood made to shape duly wrought grooved all as shown on drg after taking out old broken legs

S&F rail made out of sheesham wood made to shape duly wrought grooved all as shown on drg after taking out old broken legs

TABLE DINNING 1200 X 900 X 760 MM OR SIMILAR TABLE OF SIZE (Drg no.FD-30 FD-273 FD239 FD-1115 etc) S&F for providing following parts of table dinning 1200 x 900 x 760 mm including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :-

Table top of size 1200mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

Front or Rear rail

Polishing the following items of furniture with French polish after cleaning and removing the durt with sand paper and prepration of surfaces with approprate wood putty and suitable colour, rubbing and cleaning it with sandpaper and applying two coats of wood polish for glossy look:-

Chair Dining (Drg no. FD-16, 223& 279)

Chair writing (Drg no. FD-20, 250)

Chair Easy (Drg no. FD-16, 223& 279)

Sofa set five seats (Drg no. FD-373)

Book Case (Drg no. FD-45 & 237)

Bed Ply Top (Drg no. FD-246 & 247)

Table dining for 6 (Drg no. FD-39, 239, 273)

Table writing (Drg no. FD-41, 42)

Table dressing Gents (Drg no. FD-230)

Table dressing Ladies (Drg no. FD-31, 32)

Peg Table (Drg no. FD-25)

Table 3’ x 2’ (Drg no. FD-88, 284 & 284)

Table centre (Drg no. FD-274)

Teapoy wooden (Drg no. FD-382, 232 & 34)

Side Board (Drg no. FD-75)

Sofa set 4 seats (Drg no. FD-281/373)

Table dining 8 pers (Drg no. FD-39, 239, 273)

TABLE COMPUTER (Drg no. FD/E6/MAP/03) S&F for providing following parts of Table Computer and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge

Table top 18mm particle board

Key board tray 18mm particle board

Shelves/Drawers 18mm particle board

Legs shall be provided with PVC shoes

Channel key board 304mmx38mm and mouse & key board 304mmx25mm

Removing unserviceable part of Almirah large steel, Almirah 1/2 H 1/2 S, Almirah GD etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-Charge. (Drg no. FD-67(M), FD-103, FD114(M), FD-104(M), FD-350)

Leg made out 1.00 mm thick MS Sheet

Shelves made out of 1.00 thick MS Sheet a clip

Door made out of 1.00 mm thick MS Sheet

Removing unserviceable part of Almirah medium steel, Almirah Med GD Etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer -in-charge. (Drg no. FD-67(M), FD-103, FD114(M), FD-104(M)

Leg made out 1.00 mm thick MS Sheet

Shelves made out of 1.00 thick MS Sheet

Door made out of 1.00 mm thick MS Sheet

Removing unserviceable part of locker bed side steel etc and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. (Drg no. FD-1029)

Leg made out of 1.00 mm thick MS Sheet

Hasp & Staple MS CP

Door made out of 1.00 mm thick MS Sheet

MS CP Handle

S&F in repairs Chromium plated handle for Almirah any type complete all as specified and as directed by Engineer-in-charge. (Drg no. FD-67(M), 83(M), FD-1032,FD-114 (M), FD-104 (M), FD-350(M))

S&F in repairs steel lock with duplicate key (4 Liver). Make Godrej/Harison for almirah any typecomplete all as specified and as directed by Engineer-in-charge. (Drg no. FD-67(M), 83 (M), FD-1032,FD-114 (M), FD-104 (M), FD-350 (M))

Removing unserviceable parts of table officer steel and supply and fixing the following new parts as per specified drawing and as directed by Engineer-in-charge. (Drg no. FD-84 (M), FD-1004)

complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet

Locke 4 liver of drawer with duplicate Key

Removing unserviceable parts of Table office clerk steel, table typist steel and supply and fixing the complete Drawer box with acessories as per Drg made out of 1.00 mm thick MS Sheet as per specified drawing and as directed by Engineer - in- charge. (Drg no. FD-84(M), FD-1003 etc)

Removing unserviceable parts of Table office clerk steel, table typist steel and supply and fixing the complete Drawer box for table 3x2 with acessories as per Drg made out of 1.00 mm thick MS Sheet as per specified drawing and as directed by Engineer - in- charge. Table 3'x2' (Drg no.FD 1008 etc)

S&F in repairs 18/19 mm thick Pre laminated particle board (ISI Marked) for different furniture items of of OTM and MD Accn of existing size and pattern with 4mm thick 18mm wide TW beading etc all as directed. (Drg no. FD-84(M)/ FD-1004/1003/ 1007/ 1008/1009/1018)

S&F in repairs MS Tube 25 mm Square, 16 Gauge welded to existing frame duly painted paint OG / Black as directed to match with existing surfaces all as directed. (Drg no FD-84(M), FD-1004 /1003, FD-165, FD-1007/ 1008, FD-1018)

Supply and fixing the table tops for the steel tables for OTM and MD accn, after removing old damaged table tops. The top shall be fabricated out of 18mm thick pre laminated particale board both side laminated with one side teak shade lamination and other side white lamination. the exposed edges shall be provided 4mm x 18mm thick teakwood beading with wood adhasive and headless nails, the beading shall be properly polished after proepation of all surfaces. the tops shall be fixed with the frame tightly and properly with screws to the following tables:-

Table office officers Steel (Drg no FD-1003 Etc)

Table office clk Steel (Drg no FD-1004 Etc)

Table steel 900mm x 900mm / 3' x3' steel (Drg no FD-1014 Etc)

Teapoy Varandha (Drg no FD-255 Etc)

Table computer (Drg no FD/E6/MAP/TP)

Table 900mm x 600mm (Drg no FD-1008 Etc)

Repair of chair computer / Revolving /Chair Padded (Drg no. FD/E6/MAP/01/ /TP etc)

Supply and fixing with welding work & removing and fixing of unserviceable part as per pattern of Durun / complete assy complete all as specified and directed by Engineer-in-Charge.

Removing of unserviceable fabric, foam cushions of seat and back and upholistring of existing chair computer with new fabric, new foam 50mm thick high density (32 density) for seat and back rest as per best trade practice. Note :- Min price range of cloth to be used Rs 200/- per mtr

Taking out U/S base for chair and S&F new base complete in all respects as pe requirement and duly functional, all as specified and directed.

Removing of U/S hand rest and S & F new hand rest of best quality as per sample available in BS Yard.

replacement in Repair of padestal assembly as per sample available in BS Yard

TABLE DINING ORS (Drg no. FD-165)

S&F of top made out of PPB teak 18mm thick duly covered with aluminium sheet 22 gauge with screws as shown in drg all as specified and as directed.

M&L for painting to the frame with black japanned synthetic enameled paint after smoothing the surface with emery paper all as specified and as directed.

CHAIR VARANDAH (Drg no. FD-256)

Removing old damaged cane plastic from the chair varqandha and cleaning the steel frame with emry paper and prepration of surfaces after appling one coat of prime whereever the paing is removed or frame is found rusted, applying two coats of paint white with proper worksmanship.

Welding to the broken or loose joints whereever it is required befor painting to the steel frame of the chair varandha

Recanning the chair varandha with 4mm wide cane plastic half round white colour in a pattern as described in the drg.

Retapping the chair varandha with 25mm wide tape near in pattern shown on der, the dead ends of the newar shall be tightly stiched with frame.

Painting one coat to the following items with synthetic enameled paint Ist quality (Shalimar /British) of shade as mentioned below with spray Gun both internal/External after removing the old paint, rust and dust with sand paper dents to be removed and preparing the surface smooth by applying putty and sand paper and certain other work as mentioned against each :-

Almirah med steel with shelves with OG Paint (Drg no FD-67)

Almirah Large steel with shelves with OG paint (Drg no FD-1032)

Table office clk steel (Drg no FD-67/1003)

Table office officers steel (Drg no FD-31/1004)

Locker steel bed side (Drg no FD-1029,1002/ 1003)

Table 900 x 900mm (Drg no FD-1014 Etc)

Table 900mm x 600mm (Drg no FD-1008 etc)

Tepoy Varandha (Drg no FD-255 Etc)

Supply and fixing in replacement of 100mm thick cushion foam seat cushion foam 32 density of size 530x580mm duly covered with approved and vergin tapestry cloth of best quality. Rate of tapesrty shall not be less than Rs 200 per meter all as specified and as directed. (Drg no FD-373 281 etc)

Removing old US/worn out tapestry cloth cover of foam cushion of size 530mm x 580mm x 100mm and supply and fixing new tapestry cloth cover of best quality rate not less than Rs 200 per meter all as directed. (Drg no FD-373 281 etc)

BED HARD STEEL (FD/E6/MAP/08 & 08(R):- S&F for providing following parts and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge

18mm thick MDF board both side laminated and both side teak shade in head board

18mm thick MDF board both side laminated and both side teak shade in Front board

12mm thick plywood top with single peice and fixing and make it fit with proper workmen ship

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit (Rs. 1,04,149.75) and if any other reduction.

SB TRADING CO (BID ID -3152924)

malghotra construction co (BID ID -3153080)

M/S PREMI CONSTRUCTION CO (BID ID -3153066)

JP AND CO. (BID ID -3153124)

M.B TUBE AND ALLIED IND. Contr (BID ID -3143487)