Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC CHOUKI MOHALA PO PARASIA DISTT CHHINDWARA M P | PARASIA | CHHINDWARA | MADHYA PRADESH | L1 | Accepted-AOC Has met requirements of NIT | |
| 2 | L2₹8.6 L+₹18,103.56 (2.15%)Rejected-Finance WARD NO 09 CHANAKYA ONLINE PARASIA DISTT CHHINDWARA MADHYA PRADESH | PARASIA | CHHINDWARA | MADHYA PRADESH | 480441 | L2 | Rejected-Finance Higher rates | |
| 3 | L3₹8.8 L+₹39,386.04 (4.68%)Rejected-Finance WARD NO 16 NEAR HERO HONDA SHOWROOM KHIRSADOH PARASIA POST PARASIA DISTRICT CHHINDWARA M P | PARASIA | CHHINDWARA | MADHYA PRADESH | L3 | Rejected-Finance Higher rates | |
| 4 | L4₹9.0 L+₹54,131.32 (6.44%)Rejected-Finance WARD NO 10 JATACHAPAR PARASIA DISTT CHHINDWARA M P | PARASIA | CHHINDWARA | MADHYA PRADESH | 480449 | L4 | Rejected-Finance Higher rates | |
| 5 | L5₹9.1 L+₹72,983 (8.68%)Rejected-Finance WARD NO 14 KHAMRAJETHU KHIRSADOH PARASIA | PARASIA | CHHINDWARA | MADHYA PRADESH | 480441 | L5 | Rejected-Finance Higher rates |
Tender Value
₹10.8 L
EMD Value
₹13,600
Closing Date
28 Jun 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Staff Officer (Civil), Pench Area
Staff Officer (Civil), AGM Office, Pench Area, P.O. Parasia, Dist. Chhindwara (M.P.) 480441
Roofing of Stage and sitting stand by Profile sheet at Pench Valley School, Parasia under Pench Area
2022_WCL_247148_2
pe3350-civ-s-e016-2022-23
Open Tender
Civil Works - Others
Item Rate
90 days
Parasia
As per NIT
3 documents required · 3 mandatory
₹13,600
14 Aug 2022
18 Jun 2022
29 Jun 2022
18 Jun 2022
28 Jun 2022
18 Jun 2022
18 Jun 2022 - 25 Jun 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
White washing with lime to give an even shade : New work (three or more coats)
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush/ Ruled pointing
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Total impact of GST for the purpose of CTC
CHANAKYA ONLINE
SHAILENDRA KUMAR SWARNAKAR
S. RIZWAN INFRATECH
ASHAD INTERPRISES
BUILDMARQUE CONSTRUCTION
stage.html
html • 0.05 MB
techsummary_255340.pdf
PDF • 0.02 MB
finsummary_255340.pdf
PDF • 0.10 MB
e0162.pdf
PDF • 3.38 MB
finance_255340.pdf
PDF • 0.02 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .