REPAIRS TO FLOORING OF H TYPE QTR B. NO. 37 (BLOCK OF 8 QTRS) AT ORDNANCE ESTATE AMBERNATH

Amount

REPAIRS TO WIRING OF MTA (TW) WORKSHOP AT MPF AMBERNATH

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM1:4 including demolition for repairs etc all complete as directed by Engg in Charge.

M&L for rendering 20 mm thick cement plaster on stone masonry wall surfaces or surfaces other than fair faces of brickwork in Cement Mortar 1:4 including levelling of uneven stone surfaces including taking down old cement plaster, complete cleaning of site, removal of all rubbish outside premises etc all complete as directed by Engg-in-Charge. Note: Contractor shall use dust free aggregate for cement mortar preparation

M&L for Neeru finish to plastering as specified etc all complete as directed by Engg-in-Charge.

M&L for Virified Ceramic tiles Size 600mmx600mm 8 to 10 mm Thick as per Manufacturer (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all complete as directed by Engg-in-Charge. Make : Kajaria/ Somany/ Johnson Sample, design, colour patter etc shall be got approved from EIC before fixing .

M&L for Screed Bed Avg. 50mm thick in cement mortar 1:6 for laying floor finish etc all complete as directed by the Engg in Charge. Note: Contractor shall use dust free aggregate for screed bed preparation.

S&F Plain, solid, straight chowkats and frames in 1st class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,Matching to existing frame,including hold fast supplied and fixed, includng reovig old frame, making hole for hold fast and making it good etc all complete as directed by Engg-in-Charge. Note: Sample of frame shall be got approved from EIC before fixing.

Taking down shutters exc 2 Sq.m each & refixing in other opening including cutting to size and fitting, adjusting hinge places, filling/ planing of damaged area of chowkhats etc all complete as directed by the Engg in Charge. Imp. Note: Contractor shall carefully dismantle the shutters, re size the same to adjust floor rise due to new floor & refix the same in opening with & including necessary fittings as required.

S & F butt Hinges 125mm, medium weight cold rolled mild steel and fixed etc all complete as directed by Engg-in-Charge. Note: Sample, Design, pattern & make shall be got approved from EIC before fixing. Note: Sample of Hinges shall be got apporved from EIC before fixing.

S&F Aluminium anodised,barrel tower bolts 200 mm of extruded section and fixed etc all complete as directed by Engg-in-Charge. Note: Sample, Design, pattern & make shall be got approved from EIC before fixing.

S&F Aluminium alloy375mm length of bolt for pad lock, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc all complete as directed by Engg-in-Charge. Note: Sample, Design, pattern & make shall be got approved from EIC before fixing.

S&F Extruded aluminium alloy handles150mm, fabricated type, anodised etc all complete as directed by Engg-in-Charge. Note: Sample, Design, pattern & make shall be got approved from EIC before fixing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, including hold fast suppling & fixing in opening as per specification etc all complete as directed by Engg-in-Charge. Note: Sample, Design, pattern & make shall be got approved from EIC before fixing.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face including all fitting i.e hinges, handles, sliding bolts etc , supplying & fixing in frame at site as per specification etc all complete as directed by Engg-in-Charge. Note: Sample, Design, pattern & make shall be got approved from EIC before fixing.

M&L for applying two coat of Synthetic enamel paint (Make: 1st Quality from Nerolac/ Burger / Asian as approved by the Engg in Charge) including preparation of new surfaces, priming with red oxide coat etc all complete as directed by Engg-in-Charge.

M&L for two coat of oil emulsion distemper on wall and ceiling including preparation of new surface,Chalk whitening/ wall putty priming wth alkali resistant priming paint . Make nerolac, Burger/ Asian etc all complete as directed by Engg-in-Charge

SHAIKH ARIF ISHTIYAQUE

M/s Vandan Enterprises

Balaji Enterprises

J K Enterprises

RAHUL ENTERPRISES