COMPLETION OF INCOMPLETE WORKS FOR DEMOLITION OF EXISTING BUILDING NO. 147 AND CONSTRUCTION OF 4 NOS. TYPE-VI QUARTERS IN LIEU AT NAD KARANJA

Amount

Schedule-A' Part-I 'Buildings & Structures' Total of Schedule-'A' Part-I B/F

Schedule-A' Part-II 'Excavation, Earthwork, Site Clearance and Land Development' Total of Schedule-'A' Part-II B/F

Schedule-A' Part-III 'Demolition & Dismantling' Total of Schedule-'A' Part-III B/F BLANK

Schedule-A' Part-IV 'Internal Water Supply' Total of Schedule-'A' Part-IV B/F

Schedule-A' Part-V 'Internal Electrification' Total of Schedule-'A' Part-V B/F

Schedule-A' Part-VI 'Telephone Wiring' Total of Schedule-'A' Part-VI B/F

Schedule-A' Part-VII 'External Water Supply' Total of Schedule-'A' Part-VII B/F

Schedule-A' Part-VIII 'External Electrification' Total of Schedule-'A' Part-VIII B/F

Schedule-A' Part-IX 'Road, Path, Hard Standing & Culvert' Total of Schedule-'A' Part-IX B/F

Schedule-A' Part-X 'Drainage & Sewage Disposal' Total of Schedule-'A' Part-X B/F

Schedule-A' Part-XI 'Compound Wall & Retaining Wall' Total of Schedule-'A' Part-XI B/F

PART-XII (Miscelleneous Items)

Demolition & Dismantling

Blank

INTERNAL WATER SUPPLY

S&F angular stop cock 15mm dia, quarter turn, with adjustable wall flange of approved finish complete all as specified and as directed Make: Jaquar Model No. CQT-23059 or equivalent model of Crab Tree / Kohler

S&F concealed stop cock 15mm dia, quarter turn, with adjustable wall flange of approved finish complete all as specified and as directed Make: Jaquar Model No. CQT-23083 or equivalent model of Crab Tree / Kohler

S&F health faucet with flexible pipe (ABS body) with 1.0m long PVC tube and wall hook of approved finish complete all as specified and as directed Make: Jaquar Model No. ALD-CHR-583 or equivalent model of Crab Tree / Kohler

S&F two way bib cock with flange 15mm dia of approved finish complete all as specified and as directed Make: Jaquar Model No. CQT-23041 or equivalent model of Crab Tree / Kohler

INTERNAL ELECTRIC SUPPLY

S&F energy efficent BEE five star rated ceiling fan, 1200mm sweep and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to ceiling fan complete all as specified and as directed Make: Orient / Crompton Greaves / Bajaj

Supply and fixing 14 watt LED bulb, 230V with lamp with all accessaries internally pre-wired and including connecting up complete all as specified and as directed Make: Legrand / Havells / Standard / Cona / Leader / C&S / Crompton Greaves / Philips

Supply and fixing 1x18watt LED light fitting, 230V indoor type, with integral sleek extruded polycarbonate LED channel with acrylic cover suitable for surface / wall mounting, with inbuilt electronic control gear, bipin holders, connector blocks, etc. including LED bulb, connecting lead, 3 core 1.5sqmm, FRLS flexible copper multistranded conductor cable from ceiling rose to tubelight fitting, suspension upto 1.5m- 2Nos. complete all as specified and as directed Make: Bajaj cat No. BCLSB 18WH or equivalent model of Crompton Greaves / Philips / Wipro

Supply and fixing 1x10 watt LED light fitting, 230V indoor type, with integral sleek extruded polycarbonate LED channel with acrylic cover suitable for surface / wall mounting, with inbuilt electronic control gear, bipin holders, connector blocks, etc. including LED bulb, connecting lead, 3 core 1.5sqmm, FRLS flexible copper multistranded conducter cable from ceiling rose to tubelight fitting suspension upto 1.5m- 2Nos. complete all as specified and as directed Make: Bajaj cat No. BCLSB 10WH or equivalent model of Crompton Greaves / Philips / Wipro

S&F LED security light fitting luminaire 1x45W integral, as per IS-16102 Part-II-2012, with single piece, pressure die cast aluminium housing with efficiently designed heat shrink to deliver proper thermal management and heat resistant toughned glass fixed with SS scree, ingress protection IP-66, pre-wired, including provision of 50mm bore light grade GI pipe bracket, 1.5m long alongwith MS clamps, nuts, bolts, etc. and fixing to pole including LED bulb, connecting-up with 3 core 1.5sqmm, FRLS flexible copper multistranded conducter cable complete all as specified and as directed Make: Bajaj cat No. BRTFG 45W LED or equivalent model of Crompton Greaves / Philips / Wipro

S&F heavy duty, metalic body with metalic blades, legs, ISI marked energy efficeent BEE five star rated exhaust fan, 225mm sweep with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including making hole on wall grauting bolts nuts washers, etc. complete all as speceified and as directed Make: Orient / Bajaj / Crompton

S&F heavy duty, metalic body with metalic blades, legs, ISI marked energy efficeent BEE five star rated exhaust fan, 300mm sweep with lauvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including making hole on wall grauting bolts nuts washers, etc. complete all as speceified and as directed Make: Orient / Bajaj / Crompton

S&F MCB SPN 240Volt, 6 to 40Amps, 10kA, 50Hz , 'C' series including all electrical connections and arrangements as per site requirement and provision of requisite thimbles, lugs, etc. complete all as specified and as directed Make: Legrand / Siemens / ABB / Havells / C&S

S&F MCB SP 240Volt, 2 to 32Amps, 10kA, 50Hz , 'C' series including all electrical connections and arrangements as per site requirement and provision of requisite thimbles, lugs, etc. complete all as specified and as directed Make: Legrand / Siemens / ABB / Havells / C&S

S&F MCCB 415Volt, 63 to 100Amps, 25kA, 50Hz including all electrical connections and arrangements as per site requirement and provision of requisite thimbles, lugs, etc. complete all as specified and as directed Make: Legrand / Siemens / ABB / Havells / C&S

TELEPHONE WIRING

M&L for 2 pair un-armoured high conductive solid annealed bare copper conductor of size 0.5mm telephone cable with high density polythene insulation paired polyester taped and retardant PVC compound grey outer sheathed conforming to ITD/S/SW 113C complete all as specified and as directed

S&F telephone socket with loop complete all as specified and as directed

HOT WATER SUPPLY

Supply, installation, testing and commissioning of thermosyphonic type solar water heating system of 100 LPD capacity per day, comprising of the under mentioned criterions complete all as specified and as directed (a) Supplying and fixing cyndrical type hot water tank of capacity 100litres made out of stainless steel of grade 304L sheet 1mm thick including insulation with PUF 65mm thick of 40kg/cum density covered with 22SWG thick aluminium sheet cladding including water-proofing by polythene lining and staging made out of MS angle 40x40x5mm duly painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer (b) Supply and fixing collector flat plate type of capacity 100litres and having area not less than 2.05sqm, ISI marked including cover plate, collector box, absorber panel, insulation and mild steel staging made out of MS angle 40x40x5mm duly painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer

item No. 17.01 contd. (c) Supplying and fixing temperature gauge, ISI marked, dial type, having range 0 to 100oC (d) System water piping with GI pipe, medium grade, from collector to hot water tank including insulation with 50mm thick PUF insulation of 40kg/cum density covered with 22SWG thick aluminium sheet cladding and air vent pipe complete all as per manufacturer's instructions (e) Supply and fixing back up electrical heaters of capacity 2kW Notes: (i) Solar water heater shall be tested for it's satisfactory performance according to design data as per OEM. The testing shall be carried out in presence of the rep of the Acceping Officer (ii) Any items likely not mentioned hereinabove but necessary for a successful installation and also the required functioning of the solar water heater in entirety, shall be deemed to be included in the quoted rate

EXTERNAL WATER SUPPLY

M&L for cutting in position existing water supply CI pipe line 150mm bore and tapping in position, taking out branch connection of 80mm dia pipe by inserting tee of size 150x 150x80mm dia, including all ends, flanges as per site conditions, run lead joints, gaskets, nuts & bolts, washers, etc. including excavation and earth work in any type of strata complete all as specified and as directed Note: CI & DI fittings/specials required shall be paid separately under relevant items of Schedule-'A' / BOQ

EXTERNAL ELECTIFICATION

Supply, installation, testing and commissioning of powder coated compartmentalised, factory fabricated, CPRI approved, and having protection class IP-65, cubical LT indoor panel fabricated out of 2mm thick CRCA sheet steel weather proof vermin proof and suitable for operation on 415volts, 50Hz, phase, 4 wire AC supply complete with gland plates, lifting hooks, ventilating louvers, bus bars, inter connection, earthing, labeling electrical interlocking, suitable for termination of cables including, supply and fixing of following switch gear and accessories in the panel as listed hereunder complete all as specified and as directed

item No. 19.01 contd. Incoming (i) MCCB 4 pole, 415V, 100Amps, 25kA - 01No. (for incoming) (ii) Digital type multi-function meter to show 0 - 500V voltage 0 to 100Amps current, frequency, etc. with bar primary CTs 2500/5A - 03Nos. Bus bars - Electrolyte copper busbar, PVC colour sleeved 200Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB and green sleeves - 01set Outgoing (i) MCB SPN 40Amps, 25kA - 04Nos. (for each quarters) (ii) MCB SPN 20Amps, 10kA- 01No. (for street lights) (iii) MCB SPN 16Amps - 01No. (for building security light)

(iv) Timer switch (auto switching device operating on real time) digital type with minimum switching time of 1second, having wide range of switches week and day program with reverse 30min - 01set including 1No. MCB TP 20Amps and 01No. contactor 3 phase, 4 pole, AC control, 415V, 20Amps (v) LED type phase indicator set with controlling fuses for RYB - 01No. set of three pieces (vi) All accessories pre-wired with suitable sized copper cable or strip including foundation as per manufacturer's instructions all as required Notes: (i) The panel shall be of the following makes: (a) L&T - as per company manufacturing design / guidelines and all switchgears of L&T (b) Adlec (Legrand) - as per company manufacturing design / guidelines and all switchgears of Legrand

Notes contd.. (c) Schnieder - as per company manufacturing design / guidelines and all switchgears of Schnieder (d) Neptune - as per company manufacturing design / guidelines and all switchgears of ABB (ii) The constructional and general arrangement of drawings showing the size of panel, details of quantity and make of materials with technicla particulars / specifications, necessary certification from the manufacturer shall be submitted by the Contractor for approval of the Accepting Officer (iii) Any civil work involved in the installation of the panel board shall be deemed to be included in the quoted rate (iv) The Engineer-in-charge shall ensure that the panel shall be manufactured as per approved drawings only. The Contractor shall inform and arrange factory inspection of the panel before dispatch. The inspection shall be carried out by nominated representative/s of the Accepting Officer

S&F SMC / fiber fabricated, ISI marked, pole mounted junction box of size 280x170x130mm (external dimensions) with suitable locking arrangement including aluminium bus bar 2Nos. of size 20x3mm mounted on hygroscopic insulators and 01No. MCB SP 4Amps including fixing to street light poles with 2Nos. clamps made of MS flat 25x3mm, duly painted with black bituminous paint and fixed with requisite nuts, bolts, cable glands, etc. and connecting up complete all as specified and as directed Make: Sintex / National / Electron

S&F integral pole mounted decorative LED post top lantern 40W, protection class IP-65, made up of cast aluminium spigot housing with decorative opal acrylic diffuser with muonting pipe including LED bulb complete all as specified and as directed Make: Bajaj model 'Celesta' Cat Part No. BGCL 40W LED or equivalent model of Phillips / Crompton Greaves / Wipro / C&S

S&F single phase static energy meter of accuracy class 1.0, 240V, 50Hz with backlit LCD display, of rating 10-60Amps (measures and displays kWh and MD in kW) with special features like TOD, temper logging, optical communication port and display in absence of powerr with transparent hinge type box complete all as specified and as directed Make: HPL / C&S / AE / L&T

DEFECT RECTIFICATION

M&L for cleaning the concrete surfaces with wire brushing and removal of debries all as specified and directed

M&L for drilling and fixing Rohibb Teflon nozzles (or equivalent as approved by GE) in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. The Job shall be carried out as under :- (i) Cleaning of holes : Cleaning the holes by air blower prior to fixing of nozzles. (ii) Fixing of nozzles : Insert 12mm dia nozzles in cleaned holes. External end of nozzles to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles : Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case, crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/ MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (make as approved GE) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency, mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.

Schedule-A' Part-XIII 'Schedule of Credit' Total of Schedule-'A' Part-XIII B/F

NOTE:- (i) Contractor shall quote the percentage addition over lumpsum price of credit for material inserted by MES and carry forward the corresponding amount. However the quoted percentage shall not be less than NIL percent (i.e. shall not be on minus side). In case contractor’s quoted percentage is less than 0% (zero percent) it shall be restricted to 0% (zero percent) & total amount accordingly be corrected. The contractor shall take this aspect in account and nothing extra whatsoever shall be admissible on this account. (ii) This schedule of credit amount will be deducted from the contract sum to arrive quoted contract sum.

VARDHAMAN CONSTRUCTION COMPANY

Modern Engineering Co

jay enterprises

Hem Construction Company

Nexus Infratech

M/s Shreeji Construction Co