Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹25.4 L+₹1.8 L (7.67%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bidder | |
| 3 | L3₹26.8 L+₹3.2 L (13.4%)Rejected-Finance WARD NO 36 CHAUBEY COLONY NARSINGHGARHPURWA CHHATARPUR MADHYA PRADESH 471001 | CHHATARPUR | MADHYA PRADESH | 471001 | L3 | Rejected-Finance 3rd lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
REPAIR, MAINT OF CERTAIN BR WORKS OF OTM ACCN OF HAWK HILL AND 636 EME BN IN AGE BR-II AREA UNDER GE SAUGOR
2023_MES_592677_1
GE/SGR/TOK-11 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹60,000
Yes
30 Jun 2023
2 May 2023
31 May 2023
2 May 2023
29 May 2023
17 May 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
Demolition of RCC in precast cover slab any thickness (reinforced) complete all as specified and directed.
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises complete all as specified and directed
Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each and making the surface good with cement plastering on jambs and cills of openings in CM 1:6 each complete all as specified and directed.
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm and making the surface good with cement plastering on jambs and cills of openings in CM 1:6 each complete all as specified and directed .
Taking down shutters of any description exc 1sqm but not exc 2sqm each and making the surface good with cement plastering on jambs and cills of openings in CM 1:6 each complete all as specified and directed .
M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all coins arches , pillars, etc., built in cement mortar complete all as specified and directed.
M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
M&L for precast reinforced cement concrete type B1, (1:2:4) (using 20mm graded stone aggregates) set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for coloured anti skid ceramic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400 x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per Srl item No. 15 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmas in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles laid over and including 15mm thick screed in CM(1:6) complete all as specified and directed
All as per Srl item No. 17 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for glazed ceramic tiles of size 450mm x 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white/ coloured cement to match colour of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for 600mm x 600mm x 8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
All as per Srl item No. 20 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for mirror polished machine cut Kota stone slab flooring 18mm to 20mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed
M&L for Kota stone slab 12mm to 15mm thick in skirting, over 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed.
M&L rounding/ chamferring to edges of stone slabs one edge , such as in steps , cooking platform and other similar situations complete all as specified and directed
M&L for coloured designer tiles exterior grade (Endura or equivalent make as approved by GE ) 10mm thick laid over and including 15mm thick cement mortar 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30 to 50mm stone dust cushioning complete all as specified and directed.
M&L for 75mm thick PCC type B-1, (1:2:4) (using 12.5mm graded stone aggregates) surface finished even & smooth using extra cement complete all as specified and directed
M&L for forming Construction joint 30mm deep x 10mm wide filled with Grade ‘A’ sealing compound complete all as specified and directed
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed
M&L for 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed
M&L for plain cement concrete type D-2, 1:3:6 (using 20 mm graded stone aggregates) as in sub base complete all as specified and directed
M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed
M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonry / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&Lor rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for providing cement concrete 1:2:4, type B0 ( using 12.5mm graded stone aggregates) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including all necessary form work complete all as specified and directed.
M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed
S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24mm x 38mm x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semi-corrugated) sheets in roof coverings complete all as specified and directed.
Taking down and re-fixing Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed..
S&F 6mm thick asbestos cement serrated ridge or hip ridge for corrugated or semi corrugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.
M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed
M&L for preparing surfaces of wood & wood based materials, new or old, of any description & girth, not otherwise described & treated with one coat of creosote complete all as specified and directed.
S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed
All as per Srl item No.44 above but size 125mm x60mm complete all as specified and as directed.
S&F steel window with side hung shutters with glazing bars devotailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc including cutting holes and making good in P:C:C 1:2:4, type B-1 (using 20mm graded stone aggregates) and M&L PCC 1:3:6, type C-0 (using 12.5mm graded store aggregates) for filling in pressed steel frame complete all as specified and directed.
S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and directed.
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less than 2.50 kg/sqm), aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed (Al. section thickness 1.50 mm }
S& F glazed (5.0 mm thick plain / coloured glass) aluminium door powder coated consisting of frame of 63.50 mm x 38.10mm x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83mm x 44.45mm x 2mm mm , & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45mm x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminium beading any No of panels with aluminium handle , locking arrangement, floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS complete all as specified and directed
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34mm x 39mm,side and top of size min 92.34mmX29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20mm x 39mm ,shutter interlock min size 39X20 mm with rollers and concealed locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed (Al. section thickness 1.50 mm }
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed(with double or single shutter complete all as specified and directed.
S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with pre-laminated sheet) reinforced with MS square tube complete all as specified and directed
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm pre-laminated PVC sheet on back face complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm complete all as specified and directed.
S&F 100mm size butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed
S&F door stopper of aluminium alloy body and tongue 150mm long , anodised fixed in door with screws complete all as specified and directed.
S&F 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F framed work such as grills, gratings, sun shed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.
Hacking out old broken glass (any thickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall or in trenches with and including suitable size mild steel clamps complete all as specified.
S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or fixed to walls complete all as specified and directed.
S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed.
S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed
S&F in repairs 25 mm dia aluminium powder coated droppery rod including brackets complete all as specified and directed.
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed
S&F in repair PVC float valve assembly including accessories with float valve 20mm dia complete all as specified and directed.
S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.
S&F in repair C P bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
Supply and fixed in repair angular stop valve , 15mm dia, cast copper alloy, CP fancy type with long shank and cup screwed down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified & directed.
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair complete all as specified and directed
S&F in repair vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.
S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580mmx440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S trap complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed.
S&F in repairs vitreous China bowl urinal angle back of size 430mm x 370mm x 340mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.
S&F in repairs toli paper holder, vitreous China white, box type to walls with CP brass screws complete all as specified and directed
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position of 1000 Ltrs capacity including dismantling water tanks complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position of 500 Ltrs capacity including dismantling water tanks complete all as specified and directed.
Taking down old roof treatment of any description including mud puska, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and not exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed.
M & L for PCC ( 1: 2: 4) type B-0 (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm and binding with clean dry sand @ 0.05 Cum. per sqm over roof surfaces including preparation of old surface complete all as specified and directed.
Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed
M&L for point wiring for the following with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green :-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
5Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No 102 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire.
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
5Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.104 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire
S&F Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.
S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.
S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.
S&F Modular fan step regulator 120 Watt -2 module complete all as specified and directed .
S&F Modular bell push 6A one module complete all as specified and directed.
S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed
S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed
S&F switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed
S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.
S&F ceiling rose, surface backlite, three terminal complete all as specified and directed
S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed
S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.
S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed .
S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.
M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed
S&F in replacement including testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F in replacement including testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonry and making good to disturbed surfaces shall be included in the quoted rate
S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonry and making good to disturbed surfaces shall be included in the quoted rate
S&F in replacement LED Bulk head 13/10 watt designed for modern homes in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed
S&F in replacement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed
S&F in replacement box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed
S&F in repair/replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete all as specified and directed.
S&F in replacement modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed
S&F in replacement laminated super hylem sheet of size 8" x 5" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed
All as per Srl item No.131 above but of size 5"x5"
All as per Srl item No.131 above but of size 8"x10".
All as per Srl item No.131 above but of size 8"x12".
All as per Srl item No.131 above but of size 9"x11".
S&F PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed
S&F PVC conduit of size 25/32 mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.
S&F PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed
v k builder
m/s mahendra kumar khare contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .