Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC 219 10 NEW SARVODAY COLONY YADGARPUR MEERUT CITY INDEX NO D 308 HQ CE CC | ₹33.7 L Quoted ₹34.3 L | L1 | Accepted-AOC lowest bidder |
| 2 | L2₹36.6 LRejected-Finance INS VALSURA JAMNAGAR | JAMNAGAR | GUJARAT | 360520 | ₹36.6 L | L2 | Rejected-Finance 2nd lowest |
| 3 | L3₹38.2 LRejected-Finance 208 L MODEL TOWN LUDHIANA | LUDHIANA | PUNJAB | 141001 | ₹38.2 L | L3 | Rejected-Finance 3rd lowest |
| Sl No | Description | Qty | Unit | veer enterprises L1 | K S Enterprises L2 | S K CONSTRUCTION CO L3 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed | 10 | Each | 200 ₹2,000 | 160 ₹1,600 | 200 ₹2,000 |
| 2.00 | Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed | 15 | Each | 300 ₹4,500 | 210 ₹3,150 | 200 ₹3,000 |
| 3.00 | Taking down old steel/aluminium windows / ventilators of any description and of any type and making good the disturbed portion complete all as specified and directed. | 5 | Each | 70 ₹350 | 55 ₹275 | 200 ₹1,000 |
| 4.00 | Taking down shutters of any description exceeding 1 sqm but n. exc 2 sqm each complete all as specified and directed. | 5 | Per leaf | 60 ₹300 | 55 ₹275 | 100 ₹500 |
| 5.00 | S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. | 175 | Kg | 100 ₹17,500 | 125 ₹21,875 | 85 ₹14,875 |
| 6.00 | S&F 35 mm thick, 2nd class hard wood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed. | 10.5 | Sqm | 1,200 ₹12,600 | 1,200 ₹12,600 | 2,000 ₹21,000 |
| 7.00 | S&F 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed | 30 | Sqm | 1,200 ₹36,000 | 1,200 ₹36,000 | 2,000 ₹60,000 |
| 8.00 | S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded incl sliding door bolts, 150mm long ordinary mild steel rat rail rod pattern springs including roller plate complete (suitable for MAP Qtrs) (Sample kept in AGE B/R-II office) or as directed by Engr-in-Charge. | 250 | Kg | 100 ₹25,000 | 100 ₹25,000 | 100 ₹25,000 |
| 9.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S S crews shall be paid separately) | 7.5 | Sqm | 4,000 ₹30,000 | 4,500 ₹33,750 | 4,000 ₹30,000 |
| 10.00 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. | 22.5 | RM | 800 ₹18,000 | 850 ₹19,125 | 1,000 ₹22,500 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
8 Oct 2025, 6:00 pmClosed
GE (North) Meerut Cantt
GE (North) Meerut Cantt
WELCOME MAINT OF OFFRS MD ACCN UNDER AGE B/R-II AND AGE E/M-I OF GE (NORTH) MEERUT CANTT
2025_MES_729513_1
8602/E8
Open Tender
Civil Works
180 days
Meerut
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹90,000
Yes
24 Dec 2025
4 Sept 2025
15 Oct 2025
4 Sept 2025
8 Oct 2025
19 Sept 2025
Amount
Taking down chowkat or frame with shutters including fitting and fixtures area not exc 1.5 Sqm each (without taking off shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed
Taking down chowkat or frame with shutters including fitting and fixtures area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including cutting holes for hold fasts and making good disturbed surface with cement mortor or PCC after fixing new frame complete all as specified and directed
Taking down old steel/aluminium windows / ventilators of any description and of any type and making good the disturbed portion complete all as specified and directed.
Taking down shutters of any description exceeding 1 sqm but n. exc 2 sqm each complete all as specified and directed.
S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to velley gutters, winties for roof sheets, framing for monkey proofing, welded mesh, support to sign board & fencing post, etc as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F 35 mm thick, 2nd class hard wood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed.
S&F 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed
S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded incl sliding door bolts, 150mm long ordinary mild steel rat rail rod pattern springs including roller plate complete (suitable for MAP Qtrs) (Sample kept in AGE B/R-II office) or as directed by Engr-in-Charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S S crews shall be paid separately)
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F 100mm long SS dash fasteners complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F powder coated anodised aluminium sliding glazed window with three track / shutter, three shutter sliding with following specification complete all as specified and directed. (i) Window frame of cross section 101 mm x 44mm x 1.5mm thick (ii) Three way track for sliding shutter of cross section 91.8 mm x 31.75mm x 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick (iv) 4 mm thick tinded glass supeiror quality (v) IDPE rubber gasket for fixing of glass (vi) Locking cleats per shutter 1 Nos (vii) Sliding rollers per shutter - 02 Nos (viii) Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 for shutter 1 No (ix) Fixing of screw for frame with wall per window -08 Nos
S & F factory made UPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S & F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of new wooden surfaces & applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed
M&L Powder coated (minimum thickness 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F 4.8mm thick glass ordinary quality, ground or obscured or frosted, on one side fixed in windows/ventilators in squares n. exc 0.50 Sqm in each pane complete all as specified and directed.
Hacking out old broken glass any size thickness from steel/aluminium/wooden frame including removing MS cleats punching or drilling out old glazing pins/springs etc all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square n exc 0.50 sqm each pane complete all as specified and directed.
S&F 4.8mm thickness tinted glass ordinary quality exc 0.5 sqm in each pane and fixed with rubber gasket beading and aluminium channels in aluminium windows, bookcase/shelf with rollers, wheels, aluminum clips, screws etc and making good as per site requirement complete all as directed and specified.
S&F in repairs stainless steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed.
S&F butt hinges 100mm long stainless steel complete all as specified and directed.
S&F 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F 200mm long aluminium anodised, barrel tower boltls of extruded sections and fixed complete.
S&F 150mm extruded aluminium alloy handles, fabricated type, anodised all as specified.
S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete.
Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed.
S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 914 x 787 x 254 mm fixed with plugs and washers on wall complete all as specified and directed.
S&F in repairs for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 762 x 609 x 254mm fixed with plugs and washers on wall complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including waste coupling and waste pipe complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified and directed
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed
S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 300 ltrs, including 15 mm bore Ball PTMT brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.
S&F in repairs Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and dismantling of old water tank complete all as specified and directed.
M&L for 01 mm thick MS plain sheet for making modified lid of water tank as per sample kept in offcie of AGE B/R-II and fixed with 04 nuts and bolts for water tanks for water capacity n. exc 1000 ltrs complete all as specified and directed
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including seat and cover and connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan one piece EWCs snow white with duraplast slim soft close seat cover size (670x355x755mm) including connection to outgoing pipe complete all as specified and directed.
S&F in repairs wall hung EWCs snow white with duroplast slim soft close seat cover including rag bolts and concealed cistern set as per site requirement and connection to drain or outgoing pipe complete all as specified and directed
S&F in repairs PVC valveless flushing cistern 10 Ltr capacity (white), syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flushing pipe complete all as specified and directed.
S&F in repairs EWC seat cover with fittings (hinges) complete all as specified and directed.
S&F in repairs for Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe (oval shape suitable for MAP Qtrs) all as specified and directed.
Demolition wall and ceiling boards (fibre,pulpinsulation etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed
S&F anodised aluminium snap grid of size 605X605mm for frame work for false ceiling including 1.5mm dia GI hangers complete all as specified and directed.
S&F 4mm thick non asbestos fibre cement building boards fixed or laid /inserted to timber /GI/aluminium frame work with screws complete all as specified and directed.
S&F in repairs 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)
S&F in repairs CP 15mm bore bib tap cast copper chromium plated fancy type alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.
S&F in repairs CP 15mm bore bib tap 2-in-1 cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.
S&F in repairs CP angle valve 15mm bore cast copper alloy fency type, chromium plated with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed as specified and directed.
S&F in repairs swan neck Sink Mixer 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs Wall mixer three way telephonic type chromium plated for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed.
S&F in repairs centre hole basin mixer 15mm bore, cast copper alloy, chromium plated, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs PVC connection fibre reinforced 600mm long with brass check nuts and PVC washers at both ends as specified and directed.
S&F in repairs CP kitchen sink waste coupling of size 100mm complete all as specified and directed
S&F in repairs PVC waste pipe 32 mm dia complete all as specified and directed
S&F in repairs cast copper alloy chromium plated shower rose 150mm complete all as specified and directed.
S&F in repairs of brass adjustable rod for centre hole WHB mixer inc round washers and packing as per site requirement complete all as specified and directed
S&F in repairs brass adjustable legs for wall mixer incl washers and packing as per site requriment complete all as specified and directed
S&F in repairs Health faucet (ABS Body) chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs corner glass shelf with bracket (suitable for MAP Qtrs) (Sample kept in AGE B/R-II Office) complete all as specified and directed.
S&F in repairs stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs stainless steel toilet papar holder chromium plated fixed to plugs with chromium plated brass screws complete all as specified and directed
S&F in repairs acrylic bathroom corner shelf of (suitable for MAP Qtrs) (Sample kept in AGE B/R-II Office) fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs 16/18/20 inches long SS sliding channel for drawer complete all as specified and directed.
S&F in repairs 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.
S&F in repairs brass 2 levers mortice lock verticle type size 175mm with two S/S handles and all fixing components complete all as specified and directed.
S&F in repairs 18/19 mm thick medium density board, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work with decorative face veeners on both faces and lipping as in repairs complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises complete all as specified and directed.
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm (400x400mm), as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed.
M&L glazed ceramic tiles (coloured) 450mm x 300mm x 7mm thick/ 600mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick in CM 1:4 complete all as specified and directed.
M&L Vitrified tiles 10mm thick (square/ rectangular) (Light shade) joint free area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.
All as described Ser item No. 77 here-in-before but as in skirting laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L Vitrified ceramic tiles 10mm thick (square/ rectangular) (Light shade) (Double charge) joint free area of each tile exceeding 0.42 sqm but not exceeding 1.0 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete as specified and directed.
All as described Ser item No. 79 here-in-before but as in skirting laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick below or above ground level complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 Type C-2 (40mm graded aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour (Glossy finish), design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.
M&L for precast chequered cement concrete tiles of size 300x300x25mm thick, with grey cement and pigment, laid in floors with grey cement and joints filled with grey cement and pigment to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
S&F in repairs Multipurpose PVC Bath cabinet mirror 430mm x 330mm complete all as specified and directed.
S&F in repairs looking mirror SIZE 900 X 600 X 6MM (Suitable for MAP qtrs as per sample kept in AGE B/R-II Office) complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed.
M&L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over 10mm thick rendering in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 20mm thick screed bed or bedding layer CM 1:6 complete all as specified and directed.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Demolition of brick work / stone masonry built in cement mortar complete all as specified and directed.
M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with Sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6 except bricks complete all as specified and directed. Note : Serviceable bricks obtained from ser item no 94 shall be reused.
Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on brick work other than fare surfaces in cement mortar 1:4 on walls/chajjas finished even and smooth without using extra cement all as specified and directed.
M&L for rendering 10 mm thick on fare surfaces of brick work in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.
M&L for 5mm thick rendering on concrete surface of ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for applying 2mm thick wall care putty on walls complete all as specified and directed.
M&L for applying two coats of Premium acrylic oil bound distemper over smooth surfaces of walls complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wallls/chajjas and applying two coat of cement base paint over a coat of chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and directed.
M&L for preparation of old surfaces of walls and applying two coats of Acrylic exterior Emulsion paint (weather proof painting) using roller at any height complete all as specified and directed.
M&L for preparation of old painted surfaces of any description over 10cm girth or width, not otherwise described and applying a coat of plastic emulsion paint complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying two coats of premium acrylic oil bound distemper over and including a coat of wall care putty interior grade wherever required complete all as specified and directed.
M&L for preparing surfaces plastered or unplastered old surfaces of walls and applying two coat of white wash complete all as specified and directed.
M&L for preparing surfaces plastered or unplastered old surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
M&L for prepration of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed.
Dismantling AC sheet corrugated or semi corrugated sheet incl ridges of any description as in roof and including removal from the site complete all as specified and directed.
S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick(AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed.
S&F skylight polycarbonate sheet thickness not less than 3mm at roofs, windows top, duct covering or at any other location using self drilling screw and washer, nut & bolt, staple pins or any other suitable means all as specified and direccted.
S&F in repairs 5 mm thick, sandwich pattern, PVC Wall lining/wall panelling (sandwiched between the longitudinal grid in PVC Sheet) , consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm PVC fillets complete all as specified and as directed.
Dismantling unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
S&F Rolled sections Fe 410 -W (grade E-250) quality-A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, winties where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member as directed and specified and directed.
S&F in repairs stainless steel towel rack with rail and hooks (suitable for MAP Qtrs as per sample kept in AGE B/R-II Office) complete all as specified and directed.
S&F in repairs MS door springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate and fixing in MS frame or wooden frame complete.
S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium red & high density plastic ball screwed for iron pipe(minimum weight 20mm-210grms) complete all as specified and directed
S&F in repairs 15 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specifed and directed. (Minimum weight 15mm-142gms).
Cleaning of water tanks of capacity not exceeding 1000 litres by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed
S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints fixed to walls including clamps complete all as specified & directed
S&F in repairs 75/110mm bore PVC (SWR) Tee any radius complete all as specified and directed.
S&F in repairs 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed.
S&F in repairs door closer hydraulically aluminium (extruded section body) designation No 3, universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
S&F in repairs GI Tank nipple of 20mm/15mm bore 150mm long suitable for PVC storage tank of capacity upto 1000 litre complete all as specified and directed.
S&F in repairs sliding window lock for aluminium windows complete all as specified and directed.
S&F in repairs stainless steel grating 100 mm dia with/without waste hole over floor/Nani trap complete all as specified and directed.
M&L for welding in repairs of loose joints of sliding doors, hinges, siliding door bolts, garrage doors, windows, doors, northlight framing, monkey prrofing framing etc inc at any height & inc necessary cutting and grinding all as specified and directed.
S&F in repairs 140mm floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.
Protection and treatment of interior walls from seepages and capillary action (Item Ser No. 136 to 140)
Surface preaparation : Scraping of existing paint and removal of all loosely bonded particles, dust, and efflorescence from the wall surface using wire brush/scrapers/emery paper and disposal of waste from the site complete all as specified and directed.
Crack filling & Repair : Filling all minor cracks and surface undulations with a suitable nanotechnology based cementious putty nano wall filler complete all as specified and directed.
Applying 2 coats (Nano Bond Coat) : Application of 2 coats of nanotechnology-based Bond coat to seat the surface and promote adhesion. Each coat should be allowed to dry before the next. Usual drying time 1 hour depending on the weather complete all as specified and directed.
Salt Arrester Coat : Application of 1 coat of Nano Salt Arrestor to prevent efflorescene and inhibit salt movement through the wall due to capillary actions complete all as specified and directed.
Protective Paint: Application of 2 coat of Nano technology based Interior grade plastic paint or equivalent waterprooing paint with anti-fungal, anti-carbonation, and water-repellent properties complete all as specified and directed.
Taking down copper/ aluminium point wiring of any type (ligh, fan, bell, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings any type,termilnal box etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed. Note-Industrial bldg height approx 30 feets and all T & P arrangements will be done at contractor end.
Taking down carefully all type of sub main wiring any core including batten / conduit and making good to disturbed surface as matching to existing complete all as specified and directed.
M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FR-LSH, conforming to IS: 694-1990, PVC insulated, unsheathed copper conductor and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal box suitable for fixing moduler switches, sockets, regulator etc incl modular frame inner cover and outer cover concealed in wall any height with and including continuous green earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated multi stranded, FRLS copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed for One light/fan/bell/security light/exhaust point wiring controlled by one, one way switch/bell push button. The point wiring shall include the wiring of light/ outlets of any length from the distribution board via switch to the point.
All as described Ser item No. 143 here-in-before but one out let socket point 3pin 5 amps on independent board.
All as described Ser item No. 143 here-in-before but on the same board with other switches
All as described Ser item No. 143 here-in-before but using 2.5 sqmm copper conductor with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board all as directed.
All as described Ser item No. 143 here-in-before but using 4 sqmm copper conductor with 4 sqmm earth wire for one 20 amps socket outlet on independent board all as directed.
M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FR-LSH, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor and in existing PVC/MS concealed conduit or connecting through new caping casing of any size/ dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal box suitable for fixing moduler switches, sockets, regulator etc including modular inner frame and outer cover concealed in wall any height with and including continuous green earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated, multi stranded, FR-LSH copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed for One light/fan/bell/security light/exhaust point wiring controlled by one, one way switch/bell push button. The point wiring shall include the wiring of light/ outlets of any length from the distribution board via switch to the point.
All as described Ser item No. 148 here-in-before but one out let socket point 3pin 6 amps on independent board.
All as described Ser item No. 148 here-in-before but on the same board with other switches
All as described Ser item No. 148 here-in-before but using 2.5 sqmm copper conductor with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board all as directed.
All as described Ser item No. 148 here-in-before but using 4 sqmm copper conductor and with 4 sqmm earth wire for one 20 Amps socket outlet on independent board all as directed.
M & L for submain wiring with two single core 6 sq mm nominal area with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed FR-LSHcopper conductor with one run of 6 sq mm multi stranded copper conductor cable (FR-LSH) ISI marked for continuous green earth wire drawn in exisitng PVC conduit with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed. Note:- Two runs of 6 Sqmm Cable and one run of 6 Sqmm cable together in & including PVC conduit shall be measured as one RM.
All as described Ser item No. 153 here-in-before but using two single core 4 sqmm copper conductor and with one single core 4 sqmm earth wire for one 20 Amps socket outlet on independent board all as directed. Note:- Two runs of 4 Sqmm Cable and one run of 4 Sqmm cable together in & including PVC conduit shall be measured as one RM.
S&F Modular Switch, 1 module, 10A, AC, 240V, one way complete all as specified and directed..
S&F Modular Socket, 2 module, 10A, 3 pin combined, AC, 240V, complete all as specified and directed..
S&F Modular Socket, 2 module, 10A / 16A, 2/3 pin combined, AC, 240V, complete all as specified and directed..
S&F Modular Switch, 1 module, 16A, AC, 240V, one way complete all as specified and directed..
S&F Modular Fan Regulator, 2 module, 100W, AC, 240V, complete all as specified and directed.
S&F Modular MCB, 1 module, 6-20A, AC, 240V, one way complete all as specified and directed..
S&F 1 module modular blank plate complete all as specified and directed.
S & F in repair anodised rust proof, GI box ,flush type 4''X4'' size including 3mm mica sheet suitable size slotted for fixing piano switch/ sockets /regolator etc fixed in wall including taking down existing u/s flush box making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified & as directed :-
All as described Ser item No. 162 here-in-before but 7''x4''
All as described Ser item No. 162 here-in-before but 8''x6''
All as described Ser item No. 162 here-in-before but 8''x10''
S & F in repairs 3mm thick mica sheet slotted for mounting piano switch sockets etc including screw ,wahers etc of 5''x5'' size complete all as specified & as directed :-
All as described Ser item No. 166 here-in-before- but 8''x5''
All as described Ser item No. 166 here-in-before but 9''x7''
All as described Ser item No. 166 here-in-before but 9''x11''
S&F in repairs switch piano flush type,PC, 5A, AC, 240V, one way complete all as specified and directed.
S&F in repairs switch piano flush type,PC,15A, AC, 240V, one way complete all as specified and directed.
S&F in repairs Bell Push, Flush type, PC,5A, AC, 240V, complete all as specified and directed.
S&F in repairs socket outlet flush type, PC, 5A, 3pin, AC, 240V complete all as specified and directed.
S&F in repairs socket outlet flush type, 15A,PC 6pin, AC, 240V complete all as specified and directed.
S&F Steped Fan Regulator, PC,2 module, 100W, AC, 240V, ISI Marked complete all as specified and directed..
S&F in repairs lamp holder, angular/ straight ,PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, complete all as specified and directed..
S&F in repairs modular Power Unit 32 A, 3pin, AC, 240V including PVC Box complete all as specified and directed..
S&F in repairs Ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V, complete all as specified and directed.
S&F in repairs Call Bell, AC, 240V, SP,complete all as specified and directed.
S&F 25 mm rigid non-metallic PVC conduit inclusive of junction, tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc concealed in wall,lay in ground all as directed by enr-in-charge.
S & F in repairs 20 W surface / wall mounted, 4 feet LED T-5 industrial batten having PC diffuser, luminous efficacy of ≥100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K/3000k, THD < 20%, surge voltage protection 4kA, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 2 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge.
S&F in repairs, Wall mounting focus light with polycarbonate diffuser prewired incl 12/15 Watts LED lamp complete all as specified and directed.
S&F in repairs, Wall mounting fancy / round light fitting with polycarbonate/glass diffuser prewired suitbale for B22 incl 9 Watts LED bulb complete all as specified and directed.
S&F in repairs 10/12W LED bulkhead light outdoor IP65 fitting with polycarbonate diffuser complete all as specified and directed.
S&F in repairs, LED mirror light with polycarbonate diffuser 15/20 Watts complete all as specified and directed.
S&F in repairs pressure die-cast alluminium housing 12 Watt LED flush / surface/reccesd mounting down light luminaire powder coated finish in round or square shape with integral electronic driver THD<10% complete all as specified and directed..
S&F in repairs 25 Watt pressure die cast housing LED bldg security light luminaire IP 66 ingress protection ,Efficacy 100 lm/watt ,built-in surge protection,electronic driver incl suitable OD GI pipe bracket, mounting clamps with nuts, bolts and washers, electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete all as specified and directed
All as described Ser item No. 187 here-in-before but 35 Watts.
S & F in repairs LED POST TOP LANTERN 40 W ,IP-65 including all accessories for fixing complete all as specified and directed by Engineer-in-Charge. Make -Havells /Bajaj/Philips/Compton
S&F in repairs 15 watt LED bulb 2 pin B22 base,100 Lumems per watt,PF≥0.9, 180° wide beam angle voltage surge protection 4kV ,6500K/3000K cool white,operating voltage 100-240V complete all specified and directed.
All as described Ser item No. 190 here-in-before but 20 Watts
All as described Ser item No. 190 here-in-before but 9 Watts
S & F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 ,IK08 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed .
All as described Ser item No. 193 here-in-before but 08 way
All as described Ser item No. 193 here-in-before but 10 way
S & F sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 08 protection including provision for four pole isolator/MCB as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.
S & F Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, including 1 No MCCB of capacity upto 125 Amp and provision for 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one and taking down the old distribution board along with mcb,mccb & fixing back serviceable mcb in new DB of any type complete all as specified andd directed Note:- MCB's will be measured and paid separately as required.
S&F in repairs MCB SP 6 to 32 A, AC, 240V, 10KA, ISI Marked 'B' curve incl thimble complete all as specified and directed.
S&F in repairs MCB SPN 40 to 63 A, AC, 240V, 10KA, ISI Marked 'C' curve incl thimble etc complete all as specified and directed.
S&F in repairs Isolator DP, 40A, AC, 240V, conforming to IEC 60947-3,biconnect terminals thibles etc complete all as specified and directed.
All as described Ser item No. 200 here-in-before but 63A
S&F in repairs Isolator 4P, 63A, AC, 415V, complete all as specified and directed.
S&F in repairs 1 module SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 20 Amps complete all as specified and directed.
S&F in repairs 1100V grade PVC sheathed flexible two core cable with multistranded copper conductor of size 1.5 Sqmm, complete all as specified and directed.
S & F in repairs, 1100 volts grade heavy duty PVC sheathed stranded Aluminium conductor twin core cable flat or circular of size 10 Sqmm complete all as specified and directed
S&F in repairs, connect, tamper proof Electronic KWH meter with LCD display, 1 phase, 5 - 30 A including taking down old unserviceable one and depositing to MES complete all as specified and directed.
S&F in repairs BLDC ceiling fan 1200mm sweep 220CMM air delivery,with remote ,BEE 5 star energy rated minimum service value≥6,copper winded motor ,anti rust powder coated aluminium blade,double ball bearing, dynamically balanced including canopy,down rod,shackel assembly,safety pin,nut bolt etc electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose/junction box to the fixture complete including taking down old u/s one and depositing to MES Storeyard all as specified and directed
S&F in repairs PVC exhaust fan, 250mm sweep with lovers, AC, 230V including taking down old u/s one and depositing to MES complete all as specified and directed.
S&F in repairs metal exhaust fan, 300mm sweep with lovers, AC, 230V including taking down old u/s one and depositing to MES complete all as specified and directed.
K S Enterprises (BID ID -3444389)
S K CONSTRUCTION CO (BID ID -3440919)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid