Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC PLOT NO 9 DOOR NO F3 GRAHALAKSHMI APARTMENTS 3RD STREET INCOME TAX COLONY ADIMBAKKAM CHENNAI 600 088 | CHENNAI | TAMIL NADU | 600088 | ₹18.5 L | L1 | Accepted-AOC Lowest quoted bidder |
| 2 | L2₹22.5 L+₹4.0 L (21.6%)Rejected-Finance | ₹22.5 L+₹4.0 L (21.6%) | L2 | Rejected-Finance High quote |
| 3 | L3₹25.5 L+₹7.0 L (37.8%)Rejected-Finance A 32 PHASE II DELHI 110064 NEW DELHI DELHI 110064 UDYAM DL 11 0010761 07AADCA5437D1Z0 B R MII STATUS AS NOT VERIFIED | WEST DELHI | DELHI | 110064 | ₹25.5 L+₹7.0 L (37.8%) | L3 | Rejected-Finance High quote |
| 4 | L4₹25.7 L+₹7.2 L (39.0%)Rejected-Finance | ₹25.7 L+₹7.2 L (39.0%) | L4 | Rejected-Finance High quote |
| 5 | L5₹30.0 L+₹11.5 L (62.2%)Rejected-Finance 409 ANSAL S MAJESTIC TOWER G 17 COMMUNITY CENTRE VIKAS PURI NEW DELHI 110018 | WEST | DELHI | 110018 | ₹30.0 L+₹11.5 L (62.2%) | L5 | Rejected-Finance High quote |
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
30 May 2025, 3:00 pmClosed
A Sankaranarayanan
IPPL Haldia Terminal
Supply of various conveyor sections and spare for conveyor system
2025_IPPL_235985_1
IPPL/HAldia/BP/25-26/LT-02
Limited
Mechanical Tools and Equipment
Item Rate
90 days
IPPL Haldia Terminal
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹25,000
Yes
6 Jun 2025
21 May 2025
31 May 2025
21 May 2025
30 May 2025
21 May 2025
Amount
Supply of various conveyor sections
1. Conveyor Section for Centrally located Drive: The Conveyor section shall be used for centrally located drive units. Total length of the Section shall be 2 meter. The conveyor section shall have all the necessary items and ready to replace the existing section. Vendors scope of supply includes, Conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, Railing cum leg supports, Railing angles, WHMWPE wear pads fitted on the track, Pillow block mounting, Gear box mounting frame, idler shaft, idler sprockets, Counter weights, Soap solution tray, Gaskets, Anchor fasteners, M10 mounting bolt & Nuts including Chain complete in all respects including painting.
Conveyor Track for Straight Section: This shall be used for existing straight conveyor section to replace the damaged conveyor tracks. 2.5 meter conveyor tracks (top and bottom) assembled with flanges, fitted with wear pads.
Common Tail End: This common tail end should be combined type and total length of the section shall be 1.5 meter. The section shall have all the necessary items and ready to replace the existing section. Vendor’s scope of supply includes, common tail end conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, Railing cum leg supports, Railing angles, WHMWPE wear pads fitted on the track, idler shaft, idler sprockets, Soap solution tray, Gaskets, Anchor fasteners, M10 mounting bolt & Nuts including Chain complete in all respects including painting.
Straight Conveyor Section: This is standard 2.5 meter straight conveyor section complete in all respects. The straight conveyor section shall have all the necessary items and ready to replace the existing section. Vendors scope of supply includes, Conveyor section assembled with side channels, conveyor tracks, flange ends at both ends, Railing cum leg supports, Railing angles, WHMWPE wear pads fitted on the track, Gaskets, Anchor fasteners, M10 mounting bolt & Nuts including Chain complete in all respects including painting.
Divertors for T sections along with pneumatic cylinder and all the necessary fittings complete in all respect
Twin Arm Stopper assembly. Complete in all respects including Pneumatic cylinders, Rollers, all the necessary mountings, supporting legs and Painting.
UHMWPE wear pad for 90 degree bend section. Side mounting wear pad for protection from chain slippage from the bend.
UHMWPE wear pad for 90 degree bend section. Wear pad for mounting on conveyor track of the 90 degree bend section.
M10 x 35mm BOLT Nut Washer set
Counter weight set (Left and right sided) along with mounting handle to be used for centrally located drive sections.
SKF Bearing for Drive unit's Drive shaft with 65mm Dia. Model: YAR - 213 - 2F
Pneumatic Pusher Set. To be used for rejection line to push the cylinders from main line, Complete in all respect including 50mm Dia, stroke 400mm Pneumatic cylinder, Guide rod, Pusher pad, all the necessary fittings, mounting plate and Leg supports.
Freight and Packing & Forwarding charges
GST @ 18% for total amount of supply + Freight charges
ELECO ENGINEERING (BID ID -856075)
A.S. MECHANICAL SYSTEMS PVT LTD (BID ID -855730)
M/S SIMPLEX SYSTEMS (BID ID -855606)
LAYCOCK ENGINEERS PVT. LTD. (BID ID -856144)
EMRAD PROJECTS PRIVATE LIMITED (BID ID -855147)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .