Construction of Guest House at First and Second Floor of Existing Guest House Building at COLLEGE OF FISHERY, RAHA CAMPUS Assam Agricultural University

Amount

CIVIL WORKS:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.:Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand) sqm 294.85

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange 12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :(13.43.1) Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Providing and applying two coats of fire retardant paint on cleaned wood / ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant.

13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level upto level v Cold twisted bars

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer M.S. tube

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm

Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately)0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : 12.66.1 Precoated/mill finish aluminium Ridges plain (500- 600mm)

12.66.4 Precoated/mill finish aluminium Barge board (Upto 200 mm)

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3coarse sand:6graded stone aggregate 20mm nominal size)over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. completeat all levels (8.2.2) Granite stone slab of colour black, Cherry/Ruby red (8.2.2.2) Area of slab over 0.50 sqm

Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.(14.40.1) 125x70x4 mm (ordinary type)

Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. each

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps atjunctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparentor dyed to required shade according toIS: 1868, Minimum anodic coating of gradeAC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provisio for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

WATER SUPPLY & SANITARY: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :WC. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 18.7.6 50 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls 25 mm nominal dia Pipes

18.8.1 15 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 18.10.6 50 mm dia nominal bore

Providing and fixing PTMT grating of approved quality and colour.100 mm nominal dia

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore

18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (18.22.2) 150 mm diameter

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (18.17.4) 50 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions :(18.21.2) 45 cm length (18.21.2.1) 15 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (12.41.2) 110 mm diameter metre

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

ELECTRICAL WORKS:Wiring for circuit/ submain wiring along with Earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.7.1 : 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

1.7.2 : 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

1.7.3 : 2 x 4 sq. mm + 1 x 4 sq. mm earth wire

1.7.4 : 2 x 6 sq. mm + 1 x 6 sq. mm earth wire

Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 Sq mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch, modular plate, suitable GI box & earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core cable etc as required. 1.10.1 : Group A

1.10.2 : Group B

1.10.3 : Group c

Wiring for light/ power plug point with 2x4 sq mm FRLS pvc insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 no. 4 sq mm FRLS PVC insulated copper conductor single core cable foor loop earthing as required.

Supplying & fixing following size/ modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1.27.1 : 1 or 2 module (75mm x 75mm)

1.27. 2 : 3 module (100mm x 75mm)

1.27.3 : 4 module (125 mm x 75mm)

1.27.4 : 6 module (200mm x 75mm)

1.27.5 : 8 module (125mm x 125mm)

1.27.6 : 12 module (200mm x 150mm)

Supplying & Fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required. 1.24.1 : 5/6 A switch

1.24.2 : 2 way 5/6 A switch

1.24.3 : 15/16 A switch

1.24.4 : 3 pin 5/6 A socket outlet

1.24.5 : 6 pin 15/16 A socket outlet

1.24.6 : Telephone socket outlet

1.24.7 : TV antenna socket outlet

1.24.8 : Bell push

Supplying & Fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1.21.2 : 25 mm dia

1.21.3 : 32 mm dia

Supplying & fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

Supplying & Fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing & fixing 3 pin 5/6 A modular socket outlet & 5/6 A modular switch, connections etc as required.

Supplying & Fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing & fixing 6 pin 5/6 A & 15/16 A modular socket outlet & 15/16 A modular switch, connections etc as required.

Supplying & Fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections as required.

Supplying & Fixing brass batten/ angle holder including connections as required.

Supplying & Fixing call bell/ buzzer suitable for single phase, 230 V complete as required.

Installation, testing & commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories & tube/ lamp etc directly on ceiling/ wall, including connections with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable & earthing etc as required.

Installation, testing & commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories & tube/ lamp etc including supplying & fixing ball & socket arrangement, 2 nos. down rods of 20 mm dia x 1.6 mm thick steel conduit upto 30 cm length, painting & wiring the down rods & connections with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable & earthing etc as required.

Installation, testing & commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable, including providing & fixing phenolic laminated sheet cover on the fan box etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as required. 1.50.1 : Upto 450 mm sweep

Supplying & drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required. 1.53.2 : 2 run of cable

Supply, Installation, Testing & commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) motor… etc complete as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.4.3 : 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required. 2.10.1 : Single pole

2.10.2 : Single pole and neutral

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode including connection/termination with nut, bolt, spring, washer etc as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in cubicle panel, making connections etc required. 2.2.13 : 100A, 30 KA, FPMCCB

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioninq etc. as required 2.12.1 : 40A

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 4 Core 95.00 Sq. mm.4 Core armoured U.G. cable

Fabrication , Supply, errection,testing & commissioning of totally enclosed, dust and vermin proof, free standing, cubical type, compartmentalised, panel board indoor type 3 ph, 4 wire , 415 v , 50 hz, ac supply, of suitable size fabricated from workshop having modern fabrication and testing process, made out of 2 mm thick CRCA sheet steel (depth not less than 300mm), 25x5 mm 1 nos GI strip for earth bus with TPN 200 A 4 strip Aluminium bus bar of complete with insulators, separators, interconnecting aluminium bars / cables, cable alleys, bus alleys, cable connecting / terminating bars / terminals / studs, gland plate, screw, bolts, nuts and washers, earth bus, earth stud/bolt, mounting channel, control wiring for meters and indicators and protective devices with suitable size PVC insulated copper conductor cable and powder coating of approved quality and shade including providing and fixing of following switch gears, meters and accessories etc. complete as required as per specification. Outgoing 63 A , MCB, 10 KA , MCB "C" SERIES - 9 NOS 5- 30 A , 1 Phase Electronic type energy meter , LCD Display - 8 nos

Supplying including installation, connection as approved by the Deptt., testing and commissioning of SUBMERSIBLE PUMP SET 3 (Three Phase) with steel cable rope and submersible cable complete as directed and specified by the deptt. Three phase Submersible motor pump set (Texmo / Crompton Greaves/ Aquatic/ CRI/ V-Guar suitable for 100 mm bore well and above. 7.5 HP STAGE 40/ 50 with MCB controlled Submersible motor pump set control panel.

Supplying, Installation, Testing & Commissioning of D.G Sets, AMF panel, bus ducting/ cables from D.G sets to essential panel, D.G set enclosure room, sound insulation, ventilation/ smoke exhaust as required, earthing of D.G set system, control cabling,, fuel tank/piping, DG set exhaust piping/ exhaust chimney as per CPCB norms, civil works connected with DG sets including foundation as required.

Supplying, Installation, Testing & Commissioning of energy efficient central AC plant including low side works

FURNITURE(Godrej Make ): Study Chair(Specification: CH 8 Chair W/O Arm

Table for staff:Specification:T-8 Table (1199mm X 590mm X 735mm)

Wooden Bed: Adria king size Bed

Wooden Bed: Adriana Single Bed

Study Table: Table T-111 ( (1199mm X 590mm X 735mm)

Dining Table with Chair: Legacy PLS DINING TABLE (1780mmW X 900mmD X 760mmH) WITH ECHO CHAIR

Dressing Table: Genesys Dresser

Centre Table: Alice Glass Top Table

Sofa Set: Rio Sofa Set (2 + 1)

Sofa Set: Rio Sofa Set (3 + 1 + 1)

ElECTRICAL Appliances:LED 43'' Inch TV ( Sony Bravia KD-43 X 80L)

Swingle Door Refrigerator:(Samsung 189 L Horizontal curve Design-RR21C2H25UZ)

Geyser: (Havells Bianca 15 L

DIPANKAR BORA

Dipen Ch. Das

SAROJINI REAL CON PVT LTD