Repair of SOs/ORS bath room

Dismantling roofing including ridge, hip, valleys and gutters and stacking the materials within 50 meters lead. GS Sheet

Steel work in built up tubular (round square or rectangular hollow tube etc trusses including cutting hoisting fixing in position and applying a primer coat of approved steel primer including welding and bolted with special shaped washer etc. Hoot finished welded type tube

Providing and fixing percolated galvanized iron profile sheet(size shape and pitch of corrugation as approved by engineer in-charge) of total coated thickness 0.50 mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zink coating 120 gram per sqm IS 277 in 240mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 255 microns minimum to avoid scratcher during transportation and should be supplied in single length up to 12 meter or as directed by engineer in-charge. The sheet shall be fixed using self -drilling screws of size 5.5x55 mm) with EPDM coat complete up to any pitch in horizontal/ vertical or curved surface excluding the cost of purlin rafters and truss and including cutting to size and shape wherever required

Providing and fixing percolated galvanized steel, sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 gram per sqm as per IS 277 in 240 mpa steel grade 5-7 microns epoxy primer on both sie of the sheet and polyester top coat 15-18 microns using self- drilling. Ridge plain

12 mm cement plaster of mix 1:4(1 cement 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete

Finishing wall with acrylic smooth exterior paint of required shadeNew work (Two or more coat applied 10ltr/10 sqm over and including priming coat of exterior primer applied0.90 ltr/10 sqm

Kota stone slab flooring over 20 mm (average)thick base over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4(1 cement and 4 course sand). 25 mm thick

Providing and fixing ceramic glazed floor tile of size 300x300 mm thickness(thickness to be specified by the manufacture if 1st quality conforming to IS 15622 of approved make in color such as white ivory fume red brown laid on 20mm thick cement mortar 1:4(1 cement 4 course sand) including poiting the joint with white cement and matching pigment etc

Providing and fixing 1st quality ceramic glazed floor tile confirming to IS 15622 (thickness to be specified by manufacturer) of approved make in all colors shade except burgundy bottle green black of any as approved by engineer in-charge in skirting risers and dados over 12 mm thick bed of cement mortar1: 3 (1 cement 3 course sand) and jointing with cement slurry@ 3.33 kg per sqm including pointing with white cement with pigment of matching shade

Providing and fixing mirror of superior glass of approved quality and required shape and size with plastic molded frame of approved make and shade with 6mm thick hard board packing. Circular shape 450mm dia

Providing and fixing wash basin with CI bracket15mm CP brass pillar tap 32 mm CP brass waste of standard pattern including painting and fitting and bracket cutting and making good the wall wherever requiredWhite vitious china wash basin size 630x450 mm with a pair of 15 mm CP brass pillar tap

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipe having suitability for hot and cold water supply including all CPVC plain and brass threated fitting including fixing the pipe with clamp at 1.00 m pacing. This include jointing of pipe and fitting with the shape CPVC solvent cement and the cost of cutting cheer and making good the same including testing of joint complete as per direction of engineer in-charge. Concealed work including cutting cheers and making good the wall etc. 15 mm normal dia pipe

Providing and fixing chlorinated poly vinyl chloride (CPVC) pipe having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting. This include jointing of pipe and fitting with oone step CPVC solvent cement and trenching refilling and testing of joint complete as per direction of engineer in-charge. 25 normal dia pipe

Providing and fixing CP brass bib cock of approved quality conforming IS 8931. 15 mm nominal bore

Providing and fixing CP brass long body bib cock of approved quality conforming IS standard and weighting not less than 680gm. 15 mm nominal bore

Providing and fixing CP brass extension nipple (size 15mmx 50mm) of approved make and quality as per direction of engineer in-charge

Providing and fixing PTMT soap dish holder having length of 138 mm breath 120mm height of 75mm with concealed fitting arrangement weighting not less than 106 gm

Providing and fixing PTMT towel rail complete with bracket fixed with wooden cleats with CP brass screw with concealed fitting arrangement approved and color . 450mm long towel rail with total length of 495 mm

Supplying and fixing of following size of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm

Wiring for conduit/ sub main wiring along with following size of FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit as required 2x1.5sqmm+ 1x1.5 sq mm earth wire 2x2.5sqmm+ 2x2.5 sq mm earth wire2x4 sqmm + 2x4sq mm earth wire

2x2.5sqmm+ 2x2.5 sq mm earth wire

2x4 sqmm + 2x4sq mm earth wire

Supplying and fixing following size / module GI box along with base and cover plate for modular switches in recess etc as required 3 module(100mmx 75mm) each

8 module(125mmx 125mm)

6 module(200mmx 75mm)

Supplying and fixing 3 pin 5A ceiling rose on the existing junction box/wooden box including connection etc as reqired

Installation testing commissioning of pre wired fluorescent fitting of all types complete with accessories and tube/lamp etc. directly on ceiling/ wall including connection with 1.5 sq mm FRSL/PVC insulated copper conductor single core cable and earthling as required

Supplying and fixing 5 A to 32A 240/415V 10A C curve miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connection testing and commissioning as required Single pole

Double pole

Providing 18W LED light

pardeep kumar contractor and builders (BID ID -3128046)

MOHINDER PAL SINGH (BID ID -3127790)

SANJEEV CONSTRUCTION & ENGINEERING (BID ID -3127800)

RAJ LAXMI SALES AGENCY (BID ID -3128167)

vinod kumar (BID ID -3127897)