SPECIAL REPAIR TO BLDG NO 115 AND SPECIAL REPAIR TO FLOORING OF BLDG NO 28/H1 AND H2 AT CMDC (CC) UNDER GE E/M LUCKNOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 15mm thick screed CM1:6, complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3, complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) (double/ultra charged) coloured tiles, area of each tile n.exc 0.38 sq m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 15 mm thick screeding in CM 1:6, complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M&L Vitrified ceramic tiles 10mm thick (square/ractangular) (double/ultra/fullbody charged/marble finished) Coloured/dark shade tiles, area of each tile exc 0.42 sqm but n.exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement and pigment to match over 20 mm thick screeding in CM 1:6, complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M & L for 25mm thick plain Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) complete all as specified and directed.

Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.

M&L rendering 5 mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 finish even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and smooth complete all as specified and directed. (Note : Integral WPC shall be measured and paid seprately )

Supply only integral WPC of approved quality, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation of new/old surfaces over and including 2mm thick wall care putty complete all as specified and directed. (Note:- Painting/primer to be carried out through air less spray machine (mechanical means)

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new/old surfaces complete all as specified and directed. (Note:- Distempering to be carried out through roller/air less spray machine (mechanical means)

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and directed.

Taking down chowkhats or frames (wooden/aluminium) with shutters without taking off shutter from the frames exc. 1.5 but n. exc 4 sqm each complete all as specified and directed.

Supply and fixing for 10mm thick plain toughend glass with necessary stainless steel clips complete all as specified and directed.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and directed.

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified and directed.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed.

Taking down pipes (any sizes) incl all fittings, complete all as specified and directed.

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

All as per item No 25 above but dia of 75mm

S&F 110mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door, complete all as specified and directed.

All as per item No 27 above but dia of 75mm

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

All as per item No 30 above but dia of 75mm

S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

All as per item No 32 above but dia of 75mm

Taking down existing PVC water tank capacity exc 500 & n.exc 1000 ltr and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 1000 litres complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210gms) complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.

M&L brick work for fly ash brick straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

S & F 8 to 10 mm TMT bars in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips, complete all as specified and directed.

M&L for RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in shelves, complete all as specified and directed.

Use and waste of form work for fair finished of flat surface shelves including supports overhangs, etc complete all as specified and directed.

M&L for 20 mm thick Granite (of any type as approved by EIC) in floor/platforms/steps/risers in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding for rounding the edges complete all as specified and directed.

S&F in repair for Aluminium Anodised window, ventilator fixed type shutter with frame, with double leaf openable shutter of aluminium section weighing 0.55 Kg/m (min) incl necessary joining cleats, glazing clips rubber neoprene packing , anodised aluminium snap beading screw, incl 4.8mm thick heat absorbing glass complete all as specified and directed.

S&F in repair 4.8mm thick heat absorbing glass of approved quality, complete all as specified and directed.

S &F in repair 3mm thick aluminium composite panel with necessay jointing assesorities including necessary mild steel frame work complete all as specified and directed.

M&L Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. all as per manufactures instructions including finishing the exposed surfaces with Oil bound distemper two coats over a coat of 2mm thick white putty complete all as specified and directed.

M & L for Super heavy series PVC Wall panelling/Lining consisting of 5mm thick Plain/wood colour PVC sheet as approved inclusive of solvent cement and fixing at site on PVC frame including complete fixing arrangments on wall complete all as per manufactures specifications, complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed. Note for Item No: 7 , 10, 12 & 13 Quoted rates deemed to be included in respective items for :- (i) Necessary double scaffolding/working platform/jhullah for working upto 12 m height above ground level. (ii) All safety measures and necessary insurances of workers employed by the contractor for carrying out the work..

Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified and directed.

M&L point wiring for one light/fan point controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and directed.

All as per item No 53 above but socket outlet point 5 amps on independent board

All as per item No 53 above but one socket outlet point on same baord

M&L point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly complete all as specified and directed.

S&F Polycarbonate switch piano flush type, SP,5/6 Amps, complete all as specified and directed.

S&F Polycarbonate switch piano flush type, SP, 16/20 Amps, one way equivalent of other specified make complete all as specified and directed.

S&F Polycarbonate socket out let 2 in 1 socket 5 pin, (6 Amps) flush type controlled by one switch, specified make complete all as specified and directed.

S&F Polycarbonate socket out let 6 pin, 20 Amps ISI Marked 20 Amps 240 Volts flush type, make complete all as specified and directed.

S&F Indian standard fan step regulator 100 watt, complete all as specified and directed.

S&F Epoxy powder coated distribution box SPN 8 way, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.

S&F MCBs of the following rating and to be housed in DBs catered here in after complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each MCB of any rating) (a) SP,20 to 32 Amps, 240 Volts

All as per item No 63 above but SPN 32 to 40 Amps, 240 Volts

M&L for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered).(Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) Make of PVC insulated unsheathed FRLS copper cable

M&L for concealed sub main wiring comprising two single core, 10 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 10 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tenderer). (Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)

S&F plug and socket DBs with Single pole MCBs rated 20 Amps capacity all as specified or equivalent of other make including making niche in wall and mounted flush complete all as specified and directed.

Supply and fixing in repair Recess LED llight fittings of size 2X2 36 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and dept complete all as specified and directed.

S&F DLP 105*50 MM PVC with cover plate, saprateor , angle , end cap ,joints ,partition with all accessories as required Cat No. 010 series complete all as specified and directed.

NEW BHARAT ENGINEERING AND CONSTRUCTION CO

rajan construction

m/s raghubar dayal