Electrical Works

Amount

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for open PVC Light point / fan point (for electronic regulator) (4 points / Coil) Higher End)

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for open PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Renewal by supply and fixing of 40W Philips make smartbrit Linear 4 Feet LED Fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting

Renewal by supply and fixing of 40W Philips make Trunking 4 Feet LED Fitting with necessaryhanging support accessories with PVC unsheathed copper leads from terminals to the fitting.

Renewal by supply and fixing of 40W Philips make smartbrit Xtra 4 Feet LED Fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by supply and fixing of 18W havells make (1x1) surface mounted LED Fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by supply and fixing of 36W havells make (2x2) surface mounted LED Fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Renewal by Supply and fixing of 0.5 meter length Havells make 16W Mushroom LED bollard with pedestal Concrete mould with suitable paint (Colour as per choice) and fabrication labour charges complete set and one with necessary connection.

Renewal by supply and fixing of 85W LED Post top gate light complete with PVC unsheathed copper leads with necessary mounting accessories and with painting.

Renewal by Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Renewal by Supply and fixing of 'S' tyoe fan hook with necessary connection.

Renewal by Supply and fixing of Havells make Girik neo 400mm wall mounted fan complete with necessary wall mounting accessories and making good of the wall

Renewal by Supply and fixing of 300mm (12") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Renewal by supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 100W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Renewal by Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Renewal by Supply and fixing of 3 nos.6A two module 3 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (GI) with module cover plate (plastic) on wall with connections. Higher End

Renewal by Supply and fixing of 2nos.6/16A two module socket , 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Renewal by Supply and fixing of 1nos.6/16A two module socket, 1 no 6A Socket, 1 nos. 16A one module switch and 1 no 6A one modular switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Renewal by Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Renewal Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Renewal Supply and fixing of 1 nos.25A two module 5 pin socket and 1 nos. 25A one module switch suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Renewal by Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 125A 4P MCB switch as incoming and 1 no 63A TP MCB, 5 nos 40A TP MCB and 6 nos 6A to 32A as outgoing in flush with wall with earth connection only. Higher End

Renewal by Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 24 nos 6A to 32A as outgoing in flush with wall with earth connection only. Higher End

Renewal by Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB switch as incoming and 12 nos 6A to 32A as outgoing in flush with wall with earth connection only. Higher End

Renewal by Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A 4P MCB switch as incoming and 1 no 20A TP MCB and 9 nos 6A to 32A as outgoing in flush with wall with earth connection only. Higher End

Renewal by Supply and fixing of 32A DP pole MCB with DP Sheet steel enclosure with wall with necessary Connection.

The switch should be separated by 6mm thick hylem sheet separators and properly double earthed as per IE rules. CEIG specifications. The panel should be powder coat paint of approved colour approved by the site officer and also the danger board. The capacity of the MCCB size of incoming and outgoing cable the place to which the supply is fed should be mounted on switch chamber. The panel board should be mounted on 100mmx 50mmx MS channel provided all around the bottom of the panel. The whole arrangement should be erection of an angle iron frame pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 1.0 m from the ground level and with necessary earth connection

Renewal by Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire and making good of the concealed portion connection 1.5 sq.mm copper wire with painting of suitable colour

Renewal by Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour

Renewal by Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 6 sq.mm copper wire and making good of the concealed portion with painting of suitable colour

Renewal by Supply and laying of 3 x 4 sq.mm copper cable in a trench to be excavated at a depth of 0.75 meter putting 0.15 mt. Layer of sand and covering the cable complete with HDPE pipe and sand and refilling the earth to make good.

Renewal by Supply and run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 10 sq.mm copper wire with painting of suitable colour

Renewal by Supply and fixing of brass cable gland for 3 ½ x 35 Sqmm PVC armoured LTUG cable with earth connection.

Renewal by Supply and providing cable end termination of 3 ½ x 35 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Renewal by Supply and clamping of Run of 3 ½ x 70 sqmm PVC armoured LTUG cable on wall with earth connection

Renewal by Supply and fixing of brass cable gland for 3 ½ x 70 Sqmm PVC armoured LTUG cable with earth connection.

Renewal by Supply and providing cable end termination of 3 ½ x 70 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Renewal by Supply and laying of 3 1/2 x 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sandand covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 3 ½ x 120 Sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3 ½ x 120 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Renewal by Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sandand covering the cable completely with bricks and sand and refilling the earth to make good

Renewal by Supply and fixing of brass cable gland for 4 x 25 Sqmm PVC armoured LTUG cable with earth connection.

Renewal by Supply and providing cable end termination of 4 x 16 Sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Renewal by Supply and fixing of SMC junction box with connector and 2 nos 20A SP MCB with necessary earth connection

Renewal by Supply and Run of 1 of No.8 SWG copper wire for earth connection.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

KRS ELECTRICALS (BID ID -1484280)