Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 15 KALAINAGAR 3RD STREET MADURAI 625017 | MADURAI | TAMIL NADU | 625017 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
Refer Docs
EMD Value
₹9,000
Closing Date
23 Aug 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
BDO (BP)
BDO (BP)
Construction of Public Distribution Shop (PDS) Building (Type - II) in Polnayakanpatty Village And Sathankudi Panchayat
2024_RDTN_473919_1
31/MDU/THIRUMANGALAM/15TH FC (BP)2024/2025
Open Tender
Civil Works
Works
THIRUMANGALAM
Construction of Public Distribution Shop (PDS) Building (Type - II) in Polnayakanpatty Village And Sathankudi Panchayat
2 documents required · 2 mandatory
₹9,000
THIRUMANGALM
₹9,000
Yes
23 Aug 2024
17 Aug 2024
23 Aug 2024
17 Aug 2024
23 Aug 2024
23 Aug 2024
Amount
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS20 B for foundation etc complete
Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil as per SS20 B for foundation etc complete
Supply Filling in foundation and basement with crushed M. Sand in layers of not more than 15cm thick is well rammed watered and consolidaded etc.complete.
Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing , laying,curing etc complete.,
Supplying and filling of conveyed earth with a lead of 1Km for basement filling
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
For Plane Surfaces Such as RCC Floor Slab,roof Slab,Roof Beams,Lintel etc.
b.For Columns,Sunshades,Sill Slabs etc.,
Reinforced Cement concrete 1:11/2:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
b.For SS in Ground Floor
Supplying and fabrication of steel including cost and conveyance of steel to site and cost of binding wire including all labour charges for cutting,bending, tying and forming grills for all works
Brick partition walls using country bricks of size 83/4"x41/4"x23/4" etc., complete.for Foundation and Basement
Brick partition walls using country bricks of size 83/4"x41/4"x23/4" etc., complete.for Foundation and Basement wall X dn
for SS in Ground floor
Brick work in cement mortar 1:3 using country bricks of size 83/4"x41/4"x23/4" etc., complete., With W.P.C. 2%
Granolethic floor finish with cement concrete 1:2:4 mix using 10-12mm ISS chips including cost and conveyance of all materials and all labourcharges etc, complete.
Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick
Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specification
Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete.
Special Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc complete.
Weathering course with broken brick jeely for 20 mm size mixed with pure slacked lime (no sand to be used) in proposation of 32:12.5 cft to proper gradient,well beation with wooden beaters etc
Terrace flooring with one coarce of new machine pressed tiles of size 20x20x2 mmusing Cm 1:3 with water proofing compound 2% weight of cement used and the joints pointed with same
Supplying & fixing with cuddapah slabs including cost and all labour charges etc complete.
Supplying & fixing with Indian Water Closet including cost and all labour charges etc complete.
Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications
25mm dia UPVC pipe Toilet
20mm dia UPVC pipe Toilet Delivery line
Supplying and fixing CPVC specials including labour
25mm Tee
25mm Elbow
25mm Bend
25x20mm Reducer
20mm Tee
20mm Elbow
20mm Bend
20x15mm Reducer
Supply and Delivery of Rolling shutter including cost and conveyace of allmaterials to site complete M-0401
Fabrication,Supplying and fixing of steel door made out of 40 X 40 X 6mm M.S.angle section for outer frame and made out of 35 X 35 X 5mm M.S angle section with necessary stiffner 32 X 6mm M.S flat is used in bottom of frame in order to avoid twisting of door frame the shutter frame shall be fully covered by 18 gauge C.R.CA sheet and should be given one cost of materials labour charges and all incidental charges and fixing charges
Fabrication,Supplying and fixing of steel door made out of 40 X 40 X 6mm M.S.angle section for outer frame and made out of 35 X 35 X 5mm M.S angle section with necessary stiffner 32 X 6mm M.S flat is used in bottom of frame in order to avoid twisting of door frame the shutter frame shall be fully covered by 18 gauge C.R.CA sheet and should be given one cost of materials labour charges and all incidental charges and fixing charges
Manufacturing,supplying and fixing in postion of steel windows with the following specifications. Outer frames of windows made of Z section F7D of size 33X25X3mm at 1.419kg/m and mullion J section of made of F7D of 33X25 X 3mm at 1.419 kg / as specified in IS 7452 / 1990. Special type made with 18 X 5mm MS Flats are reevetted to the shutters at an appropriate heiht in window
Supplying, Fabricating and placing in position of steel glazed ventilator with two panes in all floors with aluminium section of the following sizes with necessary
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including
painting new iron works such as steel doors windows ventilators window bars balustrades etc with two coats approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standards specification
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC concealed Light point / fan point (For electronic Regulator) SD 26
Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling concealed PVC plug point SD 38
Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110
Supply and run off 2x1.5 sqm pvc unsheated Sc unsheated , copper conducor of 1100V gradeon 7/20 GI bearer wire for service main[SD NO. 62]
Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125
Supply and fixing of 11W CFL in the existing light point SD 83
Provision Name Board charges
Provision Photographic Charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
MURUGAN R (BID ID -1117930)
stage.html
html • 0.02 MB
finance_562884.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .