Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | ₹12.6 L | L1 | Accepted-AOC l1 |
| 2 | L2₹12.7 LRejected-AOC OLD NO 10 B NEW NO 39 3RD MAIN ROAD RAJALAKSHMI NAGAR VELACHERY CHENNAI 600 042 | CHENNAI | CHENNAI | TAMIL NADU | 600042 | ₹12.7 L | L2 | Rejected-AOC l2 |
Tender Value
₹12.6 L
EMD Value
₹13,000
Closing Date
13 Feb 2026, 3:00 pmClosed
Executive Engineer
Executive Engineer, P.W.D., Building C and M Division-3, Chepauk, Chennai-05
Special repairs to wall panelling, ceiling, doors and letter arrangements in the first floor corridor between the Senate Hall and the Vice Chancellor Office at The Tamil Nadu Dr. M.G.R. Medical University, Anna Salai, Guindy, Chennai-32
2026_PWD_652129_1
PWD/BCMD3/20/02/2025
Open Tender
Civil Works
30 days
Guindy
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹13,000
14 Mar 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
Supplying and fixing of Single skin wall panelling using 12mm thick water proof plywoods over the aluminium frame work using aluminium tubular section of size 50mm x 25mm x 3mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, with necessary screws., and finished with Mica sheet of 0.8mm thick of approved design and colour over the plywood using strong adhesive and finishing neatly etc.,complete and as directed by departmental officers.
Supplying and fixing of stepped Gypsum board false ceiling using 12.5mm thick Gypsum board over the DF metal wall frame of size 25mm x 25mm using in periphery of the ceiling fixed to the wall partition RC Columns and walls with the help of screws, Ceiling section of size 50mm x 30mm suspended at a 1200mm c/c by using 20mm x 20mm ceiling angles hanger screuly fixed to the structural soffits of RC slab using screws, intermediate channel of size 50mm x 15mm fixed to the ceiling section at the interval of 600mm c/c to form a grid of 600x 1200mm to which 12.5mm gypsum board is fixed and finished neatlty with double coat putty, one coat of primer, double coat of premium emulsion. The rate inclusive of cost of Material, frame work, labour charges for cutting and fixing and finishing neatly etc.,complete .
Supplying and fixing Country wood scantlings for door and windows and any other joinery works using teak wood scantlings below 4m in lengh and complete it in all floors including labour charges for the manufacture of frames as per standard specification.
Supplying and fixing solid core flush shutter of 35mm thick with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and over which laminated sheet of 1mm thick fixed in the Bothside of the shutter using fevicol along with necessary furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 2 Nos 300x12mm brass tower bolt 1 No. 200x12mm brass tower bolts 1no. 250x16mm brass aldrops, 2 nos. 200mm ‘D’ type brass door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Door Shutter Type : Single leaf.
Supplying and fixing solid core flush shutter of 35mm thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and over which laminated sheet of 1mm thick fixed in the outside of the shutter using fevicol along furniture fittings such as 6 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers. Door Shutter Type : Double leaf.
Supplying and Fixing of following Brass Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes etc., complete complying with standard specifications and as directed by the departmental officers.
25cm Brass English Letters
25cm Brass Tamil Letters
Emblem (15)
Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish Fully prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m, Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.
Supplying and fixing with new 2 square PVC Laminated GYP sum board GYPTYEX False ceiling in the true horizontal level false ceiling grid using hot dipped galvanized steel section exposed surface chemically cleaned capping pre finished in baned poly system paint wall angle of size 3000x24mmx24mm using in periphery of the ceiling fixed to the wall partition RC columns band walls with the held of screws of 60mm main runner of size 24x35x3000mm suspended at a 1200mm c/c by using 24x14mm angles hanger securely fixed to the structural soffits of RC slab by using 6mm cross tee of size 24x26x1200mm to be inter locked between in main runner at 600mm c/c mark to foRm a grid of 600x600mm long cross tee of size 24x26x600mm fixed in between 1200mm long cross tee for foRming a grid of 600mmx600mm finally laying high quality viny film with back side aluminium foil PVC laminated gypsum ceiling tiles regular of size 595x595x7.50mm to 8mm thick of noise reduction co-efficient NRC of 01-03 relative humidity 95% density of 780kg.m3 and light refection 0.75 etc., complete.
Supplying and fixing with new one of Hydraulic Door Closer of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) 'GAZEL' (or) Equivalent (with ISI Monogram) with ISI mark of approved quality including fixing the same position with necessary screws etc. complete complying with standard specification and as directed by the departmental officers.
Supplying and fixing with the new one of best and approved quality and colour of zebra blinds made of Double Layer polyester Fabric having Horizontal Stripes with Sheer and Solid Fabric Combination for open and dimming function to ensure light control and privacy with aluminium alloy cassette and rail arrangements. The rate is inclusive of complete fittings including labour charges for making and fixing in position, transportation etc. complete and as directed by the departmental officers.
Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles / cuddapah slab and clearing away with carefully stacking the material useful for re-use for any thickness etc., complete complying with standard specification and as directed by the departmental officer.
Paving the floor with best quality vitrified Stain Free Nano Polish Vitrified Tiles of size 600 x 600 x 8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_781968.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.23 MB
BOQ_781968.xls
BOQ • 0.34 MB
Condition.pdf
Tender Documents • 0.54 MB
Download all tender documents and submit your bid