SPECIAL REPAIRS IN BUILDINGS NO. P-28/1, 28/2 (JCOs), P-44/1, 44/4 (ORs) AND MES SUB STATION NO. 1 TO 4 MIL STN NABHA UNDER GE (S) PATIALA

Amount

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement plastering in cement mortar 1:4 and mixing the water proofing compound as per manufactures instructions on brick or concrete surface of wall complete all as specified and directed Note : Water proofing compound shall be measured and paid saparately under respective item .

M&L 10mm thick cement plastering in cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed

Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.

M&L for applying acrylic wall care putty on internal/external surfaces of walls/ ceilings/ soffits (thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving next treatment complete all as specified and directed.

M&L for applying 02 coats of interior emulsion paint (white shade) @ 10 sqm/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

M&L for applying 02 coats of exterior paint (light shade) @ 5 sqm/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

Supply only liquid integral water proofing compound ISI marked. (Make : Pidilite/Sika)

Rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified.

Preparation of new plastered or unplastered surfaces and applying three coat of white wash on ceiling surfaces all as specified.

Preparing old plastered surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm complete all as specified.

All as per serial item No 12 hereinbefore but n. exc 1.5 Sqm each.

S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, filling PCC (1:3:6 C-0) in chowkhats, PCC 1:2:4 B1 in hold fast blocks etc., complete as specified, size 105x 60mm. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be made good to match with existing finish.

S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, filling PCC (1:3:6 C-0) in chowkhats, PCC 1:2:4 B1 in hold fast blocks etc., complete as specified, size 125x 60mm. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be made good to match with existing finish.

Factory made steel windows box type using ERW hollow 'P' section comprising double frame for glaged and gauged skelton shutters jointed interally with flat iron 40x4mm complete including grill of 8mm square bar, fixed horizontally @ 10cm centre to centre, hinges, handle tower bolts, lugs etc all as shown on drawing noTD-219 (c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete Note:- (i) for the purpose of measurement & payment double shutters with frame shall be considered as one unit. (ii) Glazing, wire mesh and glass, measured and paid for separately

S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) complete kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.

Preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F Mild steel barrel tower bolt 200mm long stove enamelled black with bright bolt and fixed complete

S&F Mild steel sliding door bolt of size 250mm , stove enamelled black with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts, complete all as specified and directed.

S&F MS pressed handles of size 125mm oval type stove enamelled black complete all as specified.

S&F Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified.

S&F Mild steel butt hinges of size 50mm medium weight cold rolled complete all as specified.

S&F 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified.

S&F Steel ventilators fixed type with glazing bars complette all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description from metal/ wooden frame including punching or drilling pins/ spring clip)

Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as directed.

M&L for preparing steel surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and directed.

M&L one coat of synthetic enamel paint to old steel surfaces including preparation complete all as specified

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates complete all as specified and directed.

M&L for vitrified ceramic floor tiles of minimum size 600X600 mm 8 to 10mm thick in flooring etc set and jointed in neat cements lurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid complete all as specified and directed.

M&L for anti skid coloured ceramic floor tiles of minimum size 300X300 mm 8 to 10mm thick in flooring etc set and jointed in neat cement slurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid over in complete all as specified and directed.

M&L for Coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (300 x400 mm)X7mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick in CM (1:4) complete all as specified and directed.

Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete as directed.

M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B1 (20mm graded aggregate) as in slab supported on wall and in shelves and the like, including necessary form work complete.

M&L for TMT bars 6 to 8mm dia mild steel as in reinforcement, cut to length bent to shape required including cranking and bending with MS wire (anealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Built in steel cup board shutters made out pressed steel frame of size 75mmx45mmx1.25mm thick with pressed steel shutter 01mm thick Godrej pattern fixed to masonry wall by hold fasts made out of 25x3mm flat iron including mild steel CP hanging rod of 20mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 including spray painting with two coats of synthetic enemal paint over one coat of red oxide primer all around on steel surfaces of frame and shutter including taking down existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as specified and directed and shown on Drg No 178 sheet 2/3 and 3/3 dt 21.06.2001 and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charge.

M&L 20mm thick black coloured granite, Machine cut as in border (Patti) laid over cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry including rubbing and polishing complete all as specified and directed.

S&F Medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing fixed in repairs complete all as specified.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing fixed in repairs complete all as specified.

20 mm bore, 1 mm wall thickness MS chromium plated conduit including side cups(chroiume plated) as in curtain rods incl. brackets, fixed in repairs complete.

Taking out old damaged tar felt of any description from roof tops including cleaning and washing the surface and M&L for the following roof treatment. (a) 25 mm thick (average) cement screed in CM 1:4 on roof (tiled or concrete surfces) finishing even and fair. (b) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick weight not less than 3.60kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt, fixed as per manufacturer’s instructions complete all as specified and directed. (c) Applying one coat of bituminous primer confirming to IS-3384 @ 0.3 Ltr/Sqm. (d) Applying one coat of aluminium paint over APP membrane @ 0.50 litres per Sqm all as specified and directed. (e) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square metre including cleaning the surfaces all as directed and specified.

Dismantling of asbestos cement sheets [corrugated, semi-corrugated, etc] in roof coverings complete all as specified.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws as specified.

Dismantling of wrought iron or mild steel of any description complete.

M&L for rectangle / Squar /circular hollow section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete.

Demolition of brick work built in cement mortar complete.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified & directed.

S&F 30mm thick PVC door factory made solid panell shutters concisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain coulour PVC 'C' channel having a PVC sheet strip of 20mm width stuck in side with screws complete all as specified. (Make : Rajshree)

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing

S&F 100 mm size PVC butt hinges all as specified (Make : PRYAYAG, RAJSHREE OR EQUVALANT APPROVED BY GE)

S&F 125mm PVC handles all as specified and directed (Make : PRAYAG, RAJSHREE OR EQUVALANT APPROVED BY GE)

S&F 200mm long PVC tower bolt all as specified and directed (Make : PRAYAG, RAJSHREE OR EQUVALANT APPROVED BY GE)

S&F PVC (SWR) Floor trap 75mm plain with and including CP grating including jointing to waste pipe with solvent cement complete all as specified and directed.

PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iror clamps 25x3mm complete all as specified including taking out old damaged AC rain water pipes complete.

PVC (SWR) bends of any radius for 110mm dia rain water pipes with rubber ring joints complete all as specified.

Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position with and including 20mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1 all items fixed in repairs complete.

S&F 125mm Brass chromium plated shower rose fixed in repairs complete all as specified and directed.

S&F CP stop cock gate vsalve cast copper alloy with crutch screwed down screwed for brass ferrule for 15 mm bore pipe after of any description complete fixed in repairs all as specified.

S&F Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed in repairs complete all as specified.

S&F Pillar taps hot and cold Mixer Cast copper alloy fancy type 15mm bore, with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold mixer with long screwed shanks and fly nuts scrrewed for iron pipe and fixed in repairs all as specified.

S&F stop cock (Concealed type) cast copper alloy chromium plated fancy type, high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old stop cock of any description complete all as specified.

S&F Angle stop valve cast copper alloy chromium plated with capstan head , long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old stop cock of any description complete all as specified.

S&F 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed,

S &F Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore (Make : DIPLAST) and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed

S&F Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs complete.

S&F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed.

S&F Viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rests including connection to P or S traps and to flushing pipe, anti syphonage pipe complete fixed in repair.

Hard core of broken bricks of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface all as directed and specified

PCC (1:3:6), type C-1 50mm thick as in PCC path/ plinth protection finished the surfaces even and fair without using extra cement complete all as directed.

Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

All as per item No 77 here in before on vertical surfaces as in skirting/dado of size as required at site all as directed.

Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete.

S&F mild steel peg set of 6 fixed to wall with steel screws complete all as specified & directed.

S&F Stainless steel wall mounted kitchen dish rack in 5 layer of size 600mm X300mm X 900 mm with sheet thickness 1.00mm complete all as specified & directed.

PVC enclosed case (cabin type) with cover and looking mirror over it with two shelves in it complete all as specified and fixed with screws on wall as directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore complete all as specified

S&F cast iron 100mm sand cast bends with or without ears with cement joints laid in trenches sand cast paper all as specified

S&F cast iron 100mm sand cast vent cowl with cement joints bore complete all as specified

S&F CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as directed

S&F CI P & S trap with grating including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets

M&L anodised aluminium snap grid false ceiling of grid size 605x605mm consisting of aluminium main and "T' sectiopns of size 25x35x1.5mm thick and wall angles of size 25x 25x 1.5 mm thick suspended with GI wire suspenders of 6mm dia of suitable length and 12 mm thick gypsum board, 60x60 cm size fixed with staples on snap grid complete all as specified and directed.

S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 6 mm thick LEAD FREE PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Piano Hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

M&L Preparation of old plastered or unplastered surfaces of walls and applying one coats of cement base paint complete as directed.

Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint over a coat of cement primer complete all as specified.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over primer complete all as specified.

Preparation of old plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified.

M&L Steel rolling shutters, with ball bearing, thickness of latch 1.25mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

M&L for chequered cement concrete tiles with grey cement and pigment 20cmX 20cmX25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, over 15 mm thick cement screed bedding layer in cem,ent mortar 1:6, All as directed.

Dismantling posts or structs (wood, steel, or RCC) any section, including wire, taking out embedded portion including demolition of concrete and making good disturbed ground complete as directed.

Dismantling fencing wire mesh / barbed wire any type all as specified

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, all as specified and directed.

M&L for PCC 1:3:6, type B-1, using 40mm graded stone aggregate as in foundation for post holes complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates,Gde Fe-410-S as in fencing post incl necessary flat iron,10mm dia MS round bars, drilling holes and binding etc.

Supply and fixing chain link MS galvanised fencing any size or type.

S&F framed work as in doors or gates of angles or other section with gussets plate rails braces etc complete drill for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hook and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-O or Fe 310-O, including taking down old steel gate.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia dia barbs at 75mm spacing and straining and fixing to any type standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., as directed Note : Each line wire to be measured

S&F factory made flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with veneer with 6mm thick lipping frame to match, complete all as specified and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf (Note:- Steel Mongery shall be paid as supply only against respective item)

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated and fixing following items, complete all as specified and direceted. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 200 mm long MS rat tail pattern spring hinge including roller and roller plate - 01 No per leaf. (Note:- Steel Mongery shall be paid as supply only against respective item)

Supply only Stainless Steel (304 Grade) Finished Butt Hinges 150mm, complete all as specified.

Supply only Stainless Steel (304 Grade) Finished Tower Bolt 200mm long, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Handles 200 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250/300 mm, complete all as specifed.

Supply only Stainless Steel (304 Grade) Finished Floor Door Stooper, complete all as specifed.

Supply only 200 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified.

Factory made Pre-cast concrete blocks varying 150mm at bottom and 100mm at top M-20 (Design mix ) rounded or chamfered edges as in kerb stones set in CM 1:4 complete all as specified and directed

Non-skid coloured ceramic tiles 6 to 7mm thick( square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc. set and jointed in neat cement slurry @ 3 Kg per square metre and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:4 laid over 25mm thic PCC 1:2:4 complete all as specified and directed

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. (Make: Havells/ Plaza/ polycab) Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

All as per item No 124 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 124 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 124 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular switch 1 way 6A, 1 module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.

M&L for Modular Socket, 6A - 5 pin 2 module type all as specified and directed.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type all as specified and directed.

Supply and Fixing LED light fittings 1 x 18 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified.

Supply and fix LED Lamp LED new Adore 9 W WW Ball Lamp LHLDERHEMD 8X007 9 watt .

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified.

Material and labour for Modular Bell push 6A 1 module complete

Supply and fix in replacement LED light fitting 1 X9w/1 X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

M&L for replacement of existing earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

M & L for Fan step regulator, 120W - 1 module

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The DB shall be fiush fixed and making good the disturbed surface shall be part of job at no extra cost. (Make: Havells/Legrand/ABB)

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and REFIXING /Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan.

Refixing of dismantled exising exhaust fan any type AC single phase 230/ 240 V with louver . Note : Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x6 sqmm (line conductor) & 1x4 sqmm (earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only.

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 16 Sqmm 4 Core all as specified & directed by Engr-in-Charge.

Excavating in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable all as specified and directed.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

S&F Vertical three phase MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 4 way VTPN, with MCCB of capacity 100 Amp FP as incomers and MCB's as out going with rated bus bar 200 Amp link 230 volt (Note :- . (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(ii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iii) all the vacant holes of the DB shall be provided with blank plates of appropriate size.

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 35 Sqmm 3 & 1/2 Core all as specified & directed by Engr-in-Charge.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 4 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 sqmm, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twine core cable flat or circular, complete all as specified and directed

Supply and fix in replacement of existing unserviceable LED post top fitting powder coated aluminium die cast and spun aluminium with clear diffuser of capacity 20 Watt 5700 K including necessary electric conecction all as specified and directed by Engr-in-Charge .

Supply & Fixing in replacement with new tecnology LED energy saving LED street light with PDC aluminium body and toughned glass visor fitted in frame. secondary optical lense for superior light distribution . Efficency > 100 lumens/watt & IP66 protection level of 35 Watt capacity including GI bkt of 40 mm bore 1.5 mtr long bent to shape and making neccessry connection with service cable as directed by Engr-in- Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 3.25 mtr deep below the normal ground level ) with top edge of plate not less than 2.5 mtr below the normal ground level connected to galvanized earth strip 32X6mm thick by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) medium grade GI watering pipe 20mm dia with funnel and wire mesh and 40 mm bore GI pipe light grade proection pipe up to test point etc including excavation and charcoalt ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

NARINDER KUMAR SONS

FAVOURITE ENGINEERS