REPAIR MAINTENANCE OF NC SEWAGE PUMPSETS INCLUDING MUG STARTERS AND PANEL BOARDS AND REPAIR MAINTENANCE SEWAGE INSTALLATIONS IN THE AREA OF EAST OF JHOKE ROAD GE (WEST) FEROZEPUR CANTT

Amount

Supply only deep groove ball bearing suitable for 5 to 10 HP Motor complete all as specified and directed.

Supply only PVC fan complete suitable for 5 to 10 HP motor complete all as specified and directed.

Supply only shaft complete suitable for 5 to 10 HP motor complete all as specified and directed.

Supply only coupling set complete suitable for 5 to 10 HP motor complete all as specified and directed.

M&L for rewinding of centrifugal electric motor cap 5-10 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

All as per Srl item No 1.00 here-in-before but for capacity of 20 HP pump set.

Supply only deep groove ball bearing suitable for 20 HP Motor complete all as specified and directed.

Supply only coupling set complete suitable for 20 HP motor complete all as specified and directed.

M&L for rewinding of centrifugal electric motor cap 20 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

All as per Srl item No 1.00 here-in-before but for capacity 30 HP pump set.

Supply only deep groove ball bearing suitable for 30 HP Motor complete all as specified and directed.

Supply only PVC fan complete suitable for 30 HP motor complete all as specified and directed.

Supply only coupling set complete suitable for 30 HP motor complete all as specified and directed.

M&L for rewinding of centrifugal electric motor cap 30 HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

All as per Srl item No 1.00 here-in-before but for capacity 40 HP pump set.

Supply only deep groove ball bearing suitable for 40 HP Motor complete all as specified and directed.

Supply only shaft complete suitable for 40 HP motor complete all as specified and directed.

Supply only coupling set complete suitable for 40 HP motor complete all as specified and directed.

M&L for rewinding of centrifugal electric motor cap 40HP with super enameled copper winding wire make HTP/Devi Dyal of same size/ gauge as existing after providing 'F' class insulation material and varnishing complete all as specified. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

Supply only impeller suitable for 5-10 HP pump complete all as specified and directed.

Supply only parallel key suitable for 5-10 HP pump complete all as specified and directed.

Supply only sleeve suitable for 5-10 HP pump complete all as specified and directed.

Supply only deep groove ball bearing suitable for 5-10 HP pump complete all as specified and directed.

Supply only mechanical seal suitable for 5-10 HP pump complete all as specified and directed.

All as per Srl item No 5.00 here-in-before but suitable for 20 HP pump complete all as specified and directed.

Supply only impeller suitable for 20 HP pump complete all as specified and directed.

Supply only parallel key suitable for 20 HP pump complete all as specified and directed.

Supply only sleeve suitable for 20 HP pump complete all as specified and directed.

Supply only deep groove ball bearing suitable for 20 HP pump complete all as specified and directed.

Supply only mechanical seal suitable for 20 HP pump complete all as specified and directed.

All as per Srl item No 5.00 here-in-before but suitable for 30 HP pump complete all as specified and directed.

Supply only impeller suitable for 30 HP pump complete all as specified and directed.

Supply only parallel key suitable for 30 HP pump complete all as specified and directed.

Supply only sleeve suitable for 30 HP pump complete all as specified and directed.

Supply only deep groove ball bearing suitable for 30 HP pump complete all as specified and directed.

Supply only mechanical seal suitable for 30 HP pump complete all as specified and directed.

All as per Srl item No 5.00 here-in-before but suitable for 40 HP pump complete all as specified and directed.

Supply only impeller suitable for 40 HP pump complete all as specified and directed.

Supply only parallel key suitable for 40 HP pump complete all as specified and directed.

Supply only sleeve suitable for 40 HP pump complete all as specified and directed.

Supply only deep groove ball bearing suitable for 40 HP pump complete all as specified and directed.

Supply only mechanical seal suitable for 40 HP pump complete all as specified and directed.

Supply only rotor with shaft complete suitable for 5 HP motor complete all as specified and directed.

Supply only lower bearing complete suitable for 5 HP motor complete all as specified and directed.

Supply only upper bearing complete suitable for 5 HP motor complete all as specified and directed.

Supply only mechanical seal complete suitable for 5 HP pump complete all as specified and directed.

Supply only impeller complete suitable for 5 HP pump complete all as specified and directed.

M&L for rewinding of submersible electric motor cap 5 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

All as per Srl item No 9.00 here-in-before but suitable for 7.5 HP motor pumpset complete all as specified and directed.

Supply only rotor with shaft complete suitable for 7.5 HP motor complete all as specified and directed.

Supply only lower bearing complete suitable for 7.5 HP motor complete all as specified and directed.

Supply only upper bearing complete suitable for 7.5 HP motor complete all as specified and directed.

Supply only mechanical seal complete suitable for 7.5 HP pump complete all as specified and directed.

Supply only impeller complete suitable for 7.5 HP pump complete all as specified and directed.

M&L for rewinding of submersible electric motor cap 7.5 with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

All as per Srl item No 9.00 here-in-before but suitable for 25 HP motor pumpset complete all as specified and directed.

Supply only shaft complete suitable for 25 HP motor complete all as specified and directed.

Supply only lower bearing complete suitable for 25 HP motor complete all as specified and directed.

Supply only upper bearing complete suitable for 25 HP motor complete all as specified and directed.

Supply only mechanical seal complete suitable for 25 HP pump complete all as specified and directed.

Supply only impeller complete suitable for 25 HP pump complete all as specified and directed.

M&L for rewinding of submersible electric motor cap 25 HP with PVC insulated copper wire of existing size/guage make HTP/ Devi Dyal/National including insulation material complete all as required. Note : The contractor shall provide a written warranty for the rewound motor, valid for a minimum period of six (06) months from the date of commissioning.

Carrying out servicing/maint of 50-62.5 KVA DG set, Make : 'Greaves/Kirloskar' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as specified and directed. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid separetely as 'Supply only' items as mentioned below and shall be of make-Greaves/Kirloskar/Cummins as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted.

Supply only Lub oil filter

Supply only Fuel filter insert

Supply only Air clean element

Supply only Hose pipe & Flexible pipe complete set.

Supply only Fan belt for alternator dynamo (make-Fenner/ Poly-F/Roulunos).

Supply only Exhaust Silencer

Carrying out servicing/maint of 15 KVA-30 KVA DG set, Make : 'Greaves/Kirloskar' including 'B' check as per manufacturers mannual through authorised dealer of DG set manufacturer of existing DG Make and testing of DG set complete all as directed by Engineer-in-Charge. Note :- All material/spares parts required for carrying out above maintenance/servicing shall be measured and paid for separetely as 'Supply only' items as mentioned below and shall be of make-Greaves/Kirloskar/Cummins as per make of DG set and labour element required for replacing the spares parts including replacement of minor spare parts which are essential for carrying out servicing/maintenance of DG sets shall deemed to be included in the unit rate quoted.

Supply only Lub oil filter

Supply only Fuel filter insert

Supply only Air clean element

Supply only Hose pipe & Flexible pipe complete set.

Supply only Fan belt for alternator dynamo (make-Fenner/ Poly-F/Roulunos).

Repair/servicing of radiator assembly of 50-62.5 KVA DG Set (Greaves/Kirloskar/Cummins) after dismanteling and removing cooling fans, guard plates and lowering the same from engine after draining out water from radiator and scrapping / removing sludge / scale inside tank with acid including replacement MS tank (botom portion) at rusted portion by cutting/ welding / brazing with 2mm thick copper plate including painting. Remounting the same at its original position and repalcement of pre mixed coolent as per the ratio fixed by manufacturer and testing complete all as directed by Enginer-in-Charge. Note- Pre-mixed coolent shall be measured and paid for separately under relevant item of schedule.

Supply and fixing in replacement of new Self starter, auto lock, 12/24V of existing make, on the 50-62.5 KVA DG Set and taking out u/s self starter from DG set.

Taking down unserviceable Self starter from the DG Set 15-62.5 KVA including dismantling the Self starter and taking out burnt winding armature & field coil and cleaning the slot including re winding of armature, field coil with enameled copper conductor of existing gauge including insulating material and heat varnish. Replacing worn out armature auto lock-01PC,Carbon brushes set, Pinion set, copper bush Set, Guard piece rubber, carbon rocker, Solinoid coil and reassembling the Self starter and mounting on its original position by replacing worn out nut bolts washers including painting of self starter complete all as specified and directed.

Dismantling and opening of turbo charger assembly of 50/62.5KVA DG Set and Supply and fixing of turbo charger kit including refixing, testing complete all as specified and directed.

Repair/Servicing of water pump and replacement of water kit and water seal of 15 KVA to 62.5 KVA DG Set complete all as specified and directed.

Dismantling and taking down alternator assembly from existing engine and transporting to workshop and carry out servicing / maintenance of alternator unit of capacity 15-62.5 KVA DG set as per the phase work :- (a) Opening of Alternator and cleaning / remvoing dust from armature and field coil. (b) Cleaning of used / old lubricated substances drive/non drive end bearings. (c) Cleaning end cheeking of AVR unit (d) Cheking and tighting of coupling bolts and replacement of rubber inserts. (e) M&L for carrying out heat varnishing for field and armature coil and kept in heating chamber for 48 hours for drying properly. (f) Replacement of Bearings as per existing size. (g) Reassembling complete unit and carrying out testing at workshop and transportation to installation and coupling with DG Set including necessary alignment, cable connections all as specified and directed by Engr - in Charge

All as per srl item No 20 here-in-before but for 15 KVA to 30 KVA DG set.

Supply only Ball bearing suitable for 50-62.5 KVA DG set

M&L for dismantling, opening of diesel engine cylinder head, removal of unservieable worn out spare parts, cleaning of all components, reboring of cylinder on lathe machine, after reboring honning process will be carrred out,replacement of all spare parts and gaskets as per manufacturer spare part kit, re-assembling of complete engine setting, timing setting for the capacity of 62.5 KVA DG set complete all as specified and as directed. Note:- The spare parts shall be measured and paid for seperately under respective item of BOQ.

Supply only Piston ring set suitable for 62.5 KVA DG Set of existing make complete all as specified and as directed.

Supply only Main bearing set suitable for 62.5 KVA DG Set of existing make complete all as specified and as directed.

Supply only Oil pump assembly with drvg gear suitable for 62.5 KVA DG Set of existing make complete all as specified and as directed.

Supply only Valve (inlet and outlet valve) suitable for 62.5 KVA DG Set of existing make complete all as specified and as directed.

S&F in replacement ofHead gasket suitable for capacity of of DG set 62.5 KVA complete all as specified and as directed.

S&F in replacement of sheet metal enclosure type change over switch on load front handle four pole 415 volts 50 Hz 200 Amps including mounting arrangement of metallic frame work of appropriate section and size on walls or panels complete all as specified and as directed. Makes:- Havells/L&T/C&S Note:-The cost of making connections to the electric system, including cutting of cable of any size and type, making end termination by using suitable lugs is included in the rate quoted under this item.

Disconnecting, taking out carefully old unserviceable AVR unit, supply & fixing, connecting and testing new AVR unit as per existing make and model suitable for DG set of 50-62.5 KVA capacity. Makes:- Kirloskar/National/ Universal/cummins

Supply only lubrication oil SAE-40 ( 15 W- 40 grade) of make "Valvoline" as approved by GE.

Supply and filling of inhibitor corrosion (Fleet-Guard make Coolant) suitable for radiators of 18.75 KVA to 125 KVA capacity DG set complete all as specified and directed.

S&F as in repair stainless steel locking arrangement for DG set canopy gates rating from 15 KVA to 125 KVA complete all as specified and directed.

M&L for repair of hinges of gate of DG set conopy including the repair of gate of any capacity complete all as specified and directed.

Supply Battery Terminals Copper (Positive & Nagative) complete all as specified and directed.

Supply Battery Copper cable Red with plug complete (1 Mtr Length) complete all as specified and directed.

Supply Battery Copper cable Black with plug complete (1 Mtr Length) complete all as specified and directed.

S&F of Submersible Copper cable 3 core, 6 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.

S&F of Submersible Copper cable 3 core, 10 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.

S&F of Submersible Copper cable 3 core, 16 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.

S&F of Submersible Copper cable 3 core, 25 sqmm including lowering/lifting of submersible pump set complete all as specified and directed. Makes : Finolex/CCI /GLOSTER.

S&F LED Bldg security light 45 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection with bracket (for housing street light fittings) made of GI pipe 40 mm dia light grade 1.20 mtrs long duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed incl taking down of old unserviceable fitting of any type complete all as specified and directed.

S&F LED flood light fitting 100 watts,pressure die cast aluminium housing,heat resistane toughened glass with frame,IP 66 protection with bracket for housing floo light fittings including taking down of old unserviceable fitting of any type as per Crompton Cat Part No LSFN-120-CDL/60/M complete all as specified and directed.

Supply only LED cluster indicator lamp Red, Blue, Yellow complete all as specified and directed.

Supply,Laying, testing in replacement of underground cable XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 95 sqmm 3.5 core complete all as specified. Note : Cable shall be replaced from LT Panel near transformer to LT panel inside the Pump House.

All as per Srl Item No 52 here-in-before but for 70 Sqmm 3.5 Core complete all as specified and directed.

All as per Srl Item No 52 here-in-before but for 50 Sqmm 3.5 Core complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed.

S&F in replacement moulded case circuit breakers 4 pole 100 Amps having breaking capcity 16 KA at 415 volts complete all as specified and directed. Make:- L&T or equivalent in Havell's/Siemens

S&F in replacement moulded case circuit breakers 4 pole 63 Amps having breaking capcity 16 KA at 415 volts complete all as specified and directed. Make:- L&T or equivalent in Havells / Siemens

Shifting of Motor coupled Centrifugal Pumpset of any Capacity into Sumpwell including Machining, Forming, welding works alongwith its Dismantling, removing cable connection, Lowering, Reassembling, cable jointing and testing complete all as specified and directed.

S&F in repair for cast iron sluice valve suitable for 150mm bore CI pipe flanged type, class PN-1.6 with brass spindle both ends flanged conforming to IS 14846 , including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed . Makes:- Kirlosakar/leader/ Kartar/BIR

S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 200 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed fixed in repair complete all as specified and directed. Makes:- Kirlosakar/leader/ Kartar/BIR

S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 150 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed fixed in repair complete all as specified and directed. Makes:- Kirlosakar/leader/ Kartar/BIR

S&F in repair Non Return valve R/Flap FL duly ISI marked and both ends flanged of 100 mm bore, conforming to BIS 5312 including jointing with rubber insertion sheet 3mm thick, bolts, nuts & washers complete all as specified and directed. Makes:- Kirlosakar/leader/ Kartar/BIR

M&L in repalcement of rusted/unserviceable MS clamp of suitable size with nut,bolts & washers complete for hanging of submersible pump set with column pipes in bore well any size/cap and MS Cap of suitable size as casing cover of bore well complete all as specified and directed.

M&L in replacement of Cast iron specials, ISI marked such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing,decreasing or double socket etc.) Tee piece single branch."Y" junction,double branch,cross(all sockets or socket and spigot collars, caps and plugs upto 300 mm bore complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm & 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 25 x 4mm dia connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanized iron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 40mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. PCC chamber in cement concrete (1:3:6) type C-2 using graded stone aggregate and RCC cover in M-25 (Design mix) and all as shown in Electrical Plate No. 3 of MES Schedule (Part-I) of 2009 complete all as specified and directed.

M&L for color code painting over the complete CI pipe line of Sewage Pump House with two coats of Black synthetic enamel paint after one coats of red synthetic enamel paint complete all as specified and directed.

M&L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 150mm dia as per IS 1239 (I) complete all as specified and directed.

M&L for MS black column pipe heavy duty coated with black water proof enamel paint both ends flaged suitable for lowering of submersible pump, 10 feet in length of 100mm dia as per IS 1239 (I) complete all as specified and directed.

M/s Surjit Singh and bros (BID ID -3442760)

M/s S B Construction Company (BID ID -3443468)

shivam builders (BID ID -3443268)

AKASH ELECTRICALS (BID ID -3443043)

M/s Bansi Lal (BID ID -3443130)

M/S N Maini Constrution (BID ID -3443674)

Kissan contractor and engg works (BID ID -3443218)

ABHISHEK AND COMPANY (BID ID -3443702)