REPAIRS TO JOINERY, ROOF TREATMENT, SUNKEN TREATMENT, SANITARY FITTINGS AND OTHER ALLIED WORKS IN OMQ AREA, NP AREA AND BILLETS UNDER GE(AF) LOHEGAON AT 2 WING AF STN PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floors and paving's n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 sq m but not exceeding 0.11 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:6 complete all as specified and directed.

M&L Glazed Ceramic Coloured Tiles, 350X250X7mm/450X350X7/300x200x7/600x450x7/300x450x7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over 20mm thick screed bed in CM 1:6 including dismantling of stone slabs all as specified and directed.

Complete removing of filling materials between loose tiles joints and refilling them with mixture of white mixture of white cement and pigment to match the joints with tile surface and cleaning the complete surface from stain and other foreign material complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.and finished the cement concrete surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.

M&L for 100 mm thick cement concrete Type B-2, 1:2:4 (using 20mm graded stone aggregate), as in floors, etc, and finished the cement concrete surfaces even and smooth with out using extra cement, complete all as specified and as directed.

Dismantling of wall/ceiling board of any thickness including cover fillets etc complete all as specified and directed.

Material and labour for suspended false ceiling using anodized aluminum snap grid frame work. Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Perforated particle board/tiles for insulation and acoustic purposes, 60 x 60 cm size, fixed on snap grid 12mm thick confirming to IS 2095, 2995 Part I fixed with 25mm dry wall screws @ 230 mm C/C with screw driver to match surface attachment. Finally board have to be joined and finished to have a flush look using jointing compound/tape as per manufacturer instruction. With Designing as per direction in two steps complete all as specified and directed.

M&L for Plaster of paris decorative cornices/ moulding to the pattern as approved by Engineer in Charge of cross sectional dimension exc 13 Sqmm and n.exc 25 Sqcm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling all as directed.

Demolition of stone / block masonry built in CM complete all as specified and directed.

M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) 20mm graded aggregate and set in CM (1:6) all as specified and directed.

Supply and fix for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded Prelaminated PVC sheet on the front face and 2mm prelaminated colour PVC sheet on back face, fixed in frame at site as per specification and drawing including fittings complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with two shutters of 5mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining including frame work etc complete all as specified. :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh including frame work etc complete all as specified and directed.

Taking down cement plaster on brick/ stone wall including raking out joints, hacking for key scrubbing down with water etc. and clearing off the premises complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement but incl WPC all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each complete all as specified and as directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc.complete all as specified and as directed.

S&F 30 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc complete all as specified and as directed. (NOTE :- windows and ventilator are provided with stiles and rails as specified in SSR Part -I)

S & F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size Aluminium handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 300 mm long Aluminium sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame work, stone, concrete or brick surrounds, glazed with putty or fixed with beadings complete all as specified and directed.

S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S&F in repair galvanied steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistantance primer complete all as specified and directed.

M&L for preparation of new treated plastered / unplastered surfaces by brooming down with steel brush and applying two coat of cement base paint on existing tint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm in repairs complete all as specified and directed.

Dismantling of PVC water tanks of 500 ltr capacity and removing to store and all as specified and directed.

Dismantling of PVC water tanks of 1000 ltr capacity removing to store and all as specified and directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 20 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed.

S & F in repair of Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule fixed in repairs 20mm dia complete all as specified and directed.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, 32 mm dia all as specified and as directed.

Material and labour 10mm thick rendering in cement mortar 1:4 as in sunken portion mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed (Note water proofing compound shall be measured and paid under appropriate item of this sch A)

Material and labour for PCC type E2 1:5:10 (40mm graded aggregate) as in floor of sunken and mass concrete complete all as specified and directed.

Material and labour for Lime concrete (1:3) using 40mm graded brick bats aggregate as in floor of sunken and mass concrete complete all as specified and directed.

S&F in repair harrison rails mild steel CP of 20mm external dia and 1.60 mm thick for curtain rod including brackets complete all as specified and directed.

Dismantling single layer Mangalore pattern tiles or similar tiles in roofing complete all as specified and directed.

Dismantling battens exc 15cm for tiles any size incl tilting fillets complete all as specified and directed.

M&L for roof tiles Mangalore pattern interlocking at side joints laid dry complete all as specified and directed.

All as per item above except tiles.

M&L ridge or hip tiles to suite Manglore pattern of roofing bedded and jointed in CM 1:6 etc complete all as specified and directed.

All as per item above except ridge tiles.

M&L for IInd Class HW clean sawn batten at 30cm centre to centre sectional area exc. 5 and n.exc 15 Sqcm complete all as specified and directed.

All as per item above except batten.

M&L for preparation of wood surfaces and wood based material new or old of any description and girth not other wise described and treated with two coats of creosote complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Eaves boards, ridge fixed with self tapping screws complete all as specified and directed.

S &F 0.63mm thick plain, galvanised mild steel sheeting in ridges hips valley gutters drip and strainght flashing (length an girth as fixed) with grade of zinc coating all as specified and directed.

S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof wall etc all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed.

-do- as above but 110mm dia

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.

-do- as above but 110mm dia

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door complete all as specified and directed.

M&Lfor PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F Grating doom 100mm dia of Stainless steel with holes/without holes for waste pipes all as specified and directed.

S&F PVC Waste pipe as in WHB/sink Size 32 to 75mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 25mm dia complete all as specified and directed.

M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and directed.

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

M&L for GI tubing 25mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and directed.

M&L for cutting chases, pinning in making good to face for concealed water tubing complete all as specified and directed.

Disconnecting existing water tank exc 500 ltr and nexc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt etc from tanks and from mouth of circulatring pipes and re-fixing in position all as directed competete. (Note : For cleaning purpose only)

All as per Item No above but exc 250 and n.exc 500ltr capacity complete all as directed( Note : For cleaning purpose only)

S&F vitreous chinaware EWC including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe, PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified incl PVC seat cover fixed in repair complete all as specified and directed.

Dismantling of structural steel work complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- Fe A complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Rolled Mild Steel roof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc., complete complete all as specified and directed.

Dismantling wooden boarding, any description, fixed in any position with screws complete all as specified and directed .

M/L for 18mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and pattern as shown in Drg and as directed.

-Ditto- as above but 12mm thick.

-Ditto- as above but 6mm thick.

S&F in repair 18/19 mm pre- laminated particles board exterior Gde, pre-laminated one side with decorative choice lamination & other side balancing white laminateion fixed with screws to timber frame work. (for Kitchen cabinets/cupboards / shelves and similar works) complete all as specified and directed.

M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area n. exc. 6 Sqcm complete all as specified and directed.

M/L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc. 6 Sqcm and not. exc 13 Sq cm complete all as specified and directed.

S/F butt hinges 75mm extruded brass with MS hinges pin, bright polished and fixed type D-11 complete all as specified and directed.

S/F brass cup board lock 75mm size 4 level with duplicate keys complete all as specified and directed.

S/F brass handles extruded fabricated type 100mm size complete all as specified and directed.

S &F in repair 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete in repairs complete all as specified and directed.

M&L for preparation of new surface of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm complete all as specified and directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair for 15 mm dia CP pillar tap CP fancy type cast copper alloy complete all as specified and directed

S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed

M&Lin repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed

S &F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed

S & F in repair 15mm bore CP wall mixer for mixing hot and cold water screwed gown for iron pipe and fixed complete all as specified and directed.

S & F in repair 15mm bore Angular stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 90 gms) with flange all as specified and directed.

S & F in repair brass Chromium plated shower roses 125mm size with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S &F Bathroom Cabinet Mirror (450x350mm) size all as specified and directed.

S&F in repair for 15 mm dia CP pillar cock, cast copper alloy complete all as specified and directed.

M&L in repair for 15 mm bore bib cock straight line model chromium plated cast copper alloy with wall flange complete all as specified and directed.

S & F in repair Angular stop cock with wall flange , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S &F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S &F Two way bib cock with wall flange 15mm dia all as specified and directed.

S & F wall mixter 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe connecting legs and wall flange (wihtout hand and over head shower) all as specified and directed.

S & F single lever Wash basin mixer with popup waste with 450mm long braided hoses all as specified and directed.

S & F Corner glass shelf with brackets all as specified and directed.

S & F round shape 180mm dia overhead shower single flow with air effect (ABS body & Face plate chromium plated ) all as specified and directed.

S & F 120mm dia hand shower round shape multi flow with cascade effect (ABS body & Face plate chromium plated ) with rubit cleaning system all as specified and directed.

S &F Soap dish holder all as specified and dirrected.

S &F sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and directed.

S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm in repairs complete all as specified and directed.

S&F Bidspa Single piece-WC with electronic seat cover, hinges, fixing accessories, accessories set and cistern fittings with brackests 10 Ltr Capacity, size-360x730x740mm, S trap-300mm with brackets and all necessary fittings etc complete all as directed and specified.

S&F in repair wall hung wash hand basin with fixing accessories size, 610 mm x 465 mmx275mm with pedestal including all necessory accessories and fittings such as CI brackets, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, 32 mm dia all as specified and as directed.

Supply and Fixing Stainless steel Kitchen Cup/Saucer/Kitche utensils holder basket, corrosion resistance, seamless glossy finish, Nickel chrome palted using 5 mm dia wire/SS perforated sheet assembled and fabricated as reqd size and finish complete all as specified and as directed

Supply and Fixing for Telescopic drawer channel of Stainless steel zinc finish (silver colour) of weight capacity minimum 35 kgs including necessary fixing arrangements hinges and SS screws all as specified and as directed.

Supply and Fixing soild handle of Stainless steel chromium plated of 200 mm “D” shape including necessary fixing arrangements hinges and screws complete all as specified and as directed.

Supply and Fixing ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and necessary fixing arrangements hinges and SS screws complete all as specified and as directed.

Supply and Fixing 25mm thick machine pressed veneered decorative plywood grade I (with BWR resin) with decorative face veneers on one side and other side balancing with white lamination assembled as in drawers/cupboards/modular kitchen moulded/sliding provision on channel as required including necessary fixing arrangements complete all as specified and directed.

M&L for false ceiling with 5mm thick interlocking PVC sheets fixed with machine screws on GI channel 18 gauge, thick grid work, main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper all as directed.

Shri Sant Cosntruction (BID ID -3301981)

S.R.M.K Enterprises (BID ID -3294132)

R k construction (BID ID -3300677)

Parmanand Enterprises (BID ID -3301982)