15th Fianance Commission VPt (JJM Convergence)2020-21

Amount

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

For Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

1.50m to 4.50m Below GL

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+4.300 - +5.300m)

Above GL (+5.300 - +6.300m)

CURVED SURFACE:-

Above GL (0.000 - +3.300m)

SQUARE COLUMN:-

Below GL

Above GL (0.000 - +3.300m)

Above GL (+3.300 - +4.300m)

Above GL (+4.300 - +5.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for providing access to Roof top with suitable inclined length, bottom anchorage and including transportation charges etc., complete.

Supplying and fixing of CI manhole frame and cover of size 0.60mx0.60mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supply and delivery of 65 mm dia GM Gate Valve

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 mix using 20mm HBG metal for OHT, including cost of Reinforcement, placing grill in position, centering shuttering charges, mixing concrete, curing etc., to required height and clear width of 0.45m consisting of 2nos of vertical post of 10cmx15cm and step slab of 25mmx25mm etc., complete.

Providing PVC ventilating arrangements with mosquito proof nylon net with 110mm PVC cowl etc., complete.

Supply of Pipe connection arrangements for inlet, outlet, scour and Overflow for 30000 litres capacity OHT

65mmΦ GI pipe for inlet connection

DISTRIBUTION SYSTEM

Supply and delivery of 75 mm dia 4 KSC PVC pipe

Earth work excavation with CC Road surface

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B.

Refilling excavated earth including all cost

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Provision for cost of GI 65mm complete for Delivery line works.

Provision for lowering of GI 65mm complete for Delivery line works.

Providing FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

BT ROAD / WBM ROAD CUTTING CHARGES

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Jebaraj S