Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.0 LAccepted-AOC | L1 | Accepted-AOC Successful bidder | |
| 2 | L2₹22.5 L+₹1.5 L (7.14%)Rejected-Finance NO 16 TULASA NIWAS GANESH NAGAR SAMBRA BELAGAVI 591124 | BELAGAVI | BELAGAVI | KARNATAKA | 591124 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹24.0 L+₹3.1 L (14.6%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹24.1 L+₹3.1 L (14.8%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹25.1 L+₹4.1 L (19.5%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
Refer Docs
EMD Value
₹56,000
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIRS REPLACEMENT TO ROOF CEILING CHAJJA AND PLASTERING WITH CERTAIN ALLIED B AND R WORKS FOR CERTAIN BLDGS IN NORTH MUTGA CAMP AT AFS SAMBRA
2023_MES_611709_1
8812/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹56,000
Yes
9 Nov 2023
2 Aug 2023
8 Sept 2023
2 Aug 2023
5 Sept 2023
23 Aug 2023
Amount
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete in all respect as specified & directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified & directed.
Taking down chowkhats or frame not exc. 1.5 sqm each with shuttter (without taking off shutter from the frames) including making good to match the existing surfaces all as specified & directed.
Taking down chowkhats or frame exc. 1.5 sqm and not exc. 4 sqm each with shuttter (without taking off shutter from the frames) including making good to match the existing surfaces all as specified & directed.
Taking down existing rolling shutter from existing opening of any description and material complete including making good to match the existing surfaces all as specififed and directed
Dismantling of brickwork, concrete masony work or stone/boulder masonry work, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.
Taking down cement rendering/plastering of any thickness and of any description including raking out joints, hacking for key, scrubbing down with water etc., over wall or ceiling surfaces complete all as specified & directed.
Dismantling of existing water storage tank and supply, hoisting and fixing of triple layer, ISI marked, 1000 Litre Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position all as specified in SSR Part I including PTMT 25mm bore ball valve high pressure with epoxy coated aluminium rod and high density plastic ball , two nos new tank nipples of PTMT material 20/25mm bore dia as required complete all as specified & directed.
M & L two coats of cement and URP based chemical of approved make Dr FIXIT or equivalent make specified in P S complete all as specified and directed with the following instruction :- (a) The surfaces shall be fully cleaned with wire brush after taking down of existing plaster and removal of APP membrane over concrete surface (if any) (b) mixed in half-half portion i.e, one Kg pozollana cement and 1 litre chemical, applied over concrete surface in two coats with the help of painting brush, (c) after 8 hours, apply second coat using chemical of mix one Kg white cement and one liter chemical . (d) The mixture shall be apllied till all the voids of concrete surface shall be fully filled (e) After treatment to the concrete surface, water leakage test i.e water ponding for 48 hours to be carried out.
M & L Rendering 10mm thick cement mortar 1:3 over concrete roof or wall surface of any description finished even & smooth without using extra cement including mixing of water proofing compound as per manufacture's instructions complete all as specified & directed. Note: Water proofing compound will be paid seperately
Supply and applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per Sqm (in two coats) without leaving the pores/voids in the surface including cleaning the surfaces over primed or APP membrane surface complete all as specified and directed.
Supply only bitumen based primer for use in waterproofing and damp-proofing treatments applied @ 0.30 liter per Sqm in two coats over concrete/plastered surface including cleaning the surface complete all as specified and directed.
Providing and laying in patches APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) forced application with the fire torch including applying primer complete all as specified and directed. Note: Primer shall be paid seperately under relevant item of schedule.
M & L preparation of bituminuous surface of any description and applying two coats of aluminium paint complete all as specified and directed.
Supply only water proofing compound all as specified and directed.
M & L cleaning and removing of all scale and dirt etc., cleaning mouth of circulating pipes, using 70gm of bleaching powder per tank from water storage tank of capacity 500 litres but not exc. 1000 litres each, after taking down by disconnecting of outlet pipe and re-connecting in the same position after cleaning and marked on tank with white synthetic enamel paint as " tank cleaned on ________(date)" using stencil complete all as specified and directed
Supply and fixing cover for PVC water storage tank of 500/1000 liter capacity of any description and shape as per existing water storage tank including necessary locking arrangement complete all as specified and directed
Supply and fix in repair Gun-metal, globe or gate valves 25mm dia bore with iron wheel head, screwed both ends for water pipe of any material complete all as specified and directed
Supplying and laying in repair CPVC pipes SDR 11 nominal size 20mm including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and making good complete all as specified and directed.
Supplying and laying in repair CPVC pipes SDR 11 nominal size 25mm including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good complete all as specified and directed.
M & L pre-cast cement concrete 1:3:6, type C1 using 20mm graded crushed stone aggregate as in solid block masonry setting in cement mortar 1:4 having minimum compressive strength of 50 Kg per Sqcm complete all as specified & directed.
M & L cement concrete 1:2:4 , type B-1, using 20mm crushed graded stone aggregate for 50mm thick levelling/to receive screed for laying floor finish or similar work finished fair and even complete all as specified and directed.
M & L cement concrete 1:2:4, type B-1, using 20mm crushed graded stone aggregate as in mud stops, roof kerbs, rounded or chamfered or similar items finished fair and even including necessary form work complete all as specified & directed.
M & L cement concrete 1:2:4 type B-1, using 20mm crushed graded stone aggregate as in 75mm thick sub-base to floors & pavings or similar work finished fair and even complete all as specified & directed.
M & L cement concrete 1:3:6 type C-1, using 20mm crushed graded stone aggregate as in 75mm thick plinth protection including filling of expansion joint with bituminous mixture finished even and smooth without using extra cement complete all as specified & directed.
M & L cement concrete 1:4:8 type D-1, using 20mm crushed graded stone aggregate as in 75mm thick sub-base to floors or similar type of work finished fair and even complete all as specified & directed.
M & L cement concrete 1:2:4 type B-1, using 20mm crushed graded stone aggregate as in coping, hold fast block or similar type of work including necessary form work complete all as specified & directed.
M & L sand filling under paver block/floors or in foundations including watering and consolidation complete all as specified & directed.
Providing and laying precast cement concrete interlocking paver block, rubber moulded, 60mm thick machine pressed, of any shape and size confirming to IS 15658-2006, M-35 Grade of concrete with grey cement and pigment complete all as specified & directed.
S & F Steel rolling shutters, 1.25mm laths thickness, of approved laths design/pattern (as per IS-6248:1979 or latest revision), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer over it, erected in position as indicated, complete all as specified and directed.
S & F Steel rolling shutters 1.25mm laths thickness of approved laths design/pattern gear operated type with bevel gear box and crank handle, (as per IS-6248:1979 or latest revision), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer over it, erected in position as indicated complete all as specified and directed.
S & F Aluminum frame/sections for doors, windows, ventilators, or partitions duly powder coated (minimum thickness of powder coating 50 micron) with one or more rebates including jointing cleats/angles for jointing each other etc., complete all as specified and directed.
S & F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick dark black tint plain glass and stainless steel wire mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed with the following sections of sliding window :- (a) Main Frame bottom section : Jindal section No 20798 (b) Main Frame top & sides section : Jindal section No 20678 (c) Sliding shutter section (handle ) : Jindal section No 20707 (d) Sliding shutter section for top & bottom : Jindal section No 20842 (e) Sliding shutter section for interlock : Jindal section No 21091
S & F Aluminium window and ventilator shutterspowder coated (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections of not less than 60mm width & 2mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, peg stays 150mm long (1 no. per window), hinges 100mm long (2/3 nos.) suitable handle (1 no.) complete all as specified & directed.
S & F Aluminium door shutters powder coated (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections not less than 100mm width & 2mm thick including necessary joining cleats, glazing clips, EPDM rubber packing, snap beading, screws, aluminium fittings per shutter such as hinges 100mm long (3/4 nos.) suitable handle (2 nos) complete in all respect as specified & directed.
S & F Aluminium grill powder coated (minimum thickness of powder coating 50 micron) fixed to frame with "U"/"C" channel/section including necessary cutting for handles etc. complete all as specified & directed.
S & F mortice lock vertical type of 100mm size , 4 levers mild steel fixed in aluminium door shutters complete all as specified & directed.
S & F sheet glass, ordinary quality, in squares or rectangular not exceeding 0.5sqm, 4mm thickness with solar control film 50micron reflective type sticked to glass pane complete all as specified and directed.
S & F figured glass, 4mm thick, pin head type not exceeding 0.5sqm and glazing with oil putty in squares or rectangular complete in all respect as specified and directed.
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified & directed.
S & F mild steel bar/sections as in window fancy guard bar, design made from flat, round, square and fixed independently in wall/frames including PCC bed blocks/ fastners as directed complete all as specified and directed.
S & F pre polished Granite stone 16-18mm thick (of any type) work (table rubbed and polished) in steps, jambs, reveals, pillars, window-cills, cooking platforms, WHB counter and like laid over 20mm thick cement mortar 1:4 bedding including pointing with joint filler powder mixed with pigment to match the shade of stone including hole for gas pipe line, WHB/Sink mixer/hole for fastners/ cutting for wash hand basin, WHB waste grating etc; complete all as specified & directed.
M & L full round moulding to edges of stone slabs of any description upto 20mm thick, such as in window cill, jambs, cooking platform, WHB counter etc., and other similar situations complete all as specified & directed.
Supply and fixed in repair Bib tap chromium plated cast copper alloy, fancy type 15mm bore dia, long body screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete in all respect as specified & directed.
Supply and fixed in repair Bib tap chromium plated cast copper alloy,fancy type 15mm bore dia, short body, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed.
Supply and fixed in repair Angle stop valve,15mm bore dia, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified & directed.
Supply and fixed PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed.
Supply and fixed PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
Supply and fix PTMT gratings 150X150mm size with openable 100mm dia grating with or without waste hole including necessary cutting and make good of floor complete all as specified & directed.
Supply and fix high grade PVC bath room mirror cabinet of size 450mmX350mm, 3mm thick looking mirror fixed with wooden/PVC plugs with screws complete all as specified & directed.
Supply and fix in repairs 32/40mm dia PVC flexible waste pipe for wash hand basin, kitchen sink, urinal or similar work complete all as specified and directed.
M & L Coloured non-skid ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor, set and jointed in neat cement slury and pointed in white cement with pigment to match the shade of tiles over & including cement screed bed or bedding layer 15mm thick in cement mortar 1:4 including dismantalling of existing tiles and cement screed bedding complete in all respect as specified & directed.
M & L Coloured glazed ceramic tiles joint less/edge cutted of size exc 0.11 Sqm not exc 0.18Sqm, 7-8mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including backing coat 10mm thick cement mortar (1:4) including dismantalling of existing tiles and cement screed bedding complete in all respect as specified & directed. Note:- The quoted rate is deemed to be included those tiles fixed right angled to each other, the each tile should be chamfered/trim/sharp at 45 degrees at joint/corner/edge
M & L Vitrified tiles 8-10mm thick joint less/edge cut, dark shade, double charged (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, over & including cement screed bed or bedding layer15mm thick 1:4 including dismantalling of existing tiles and cement screed bedding complete all as specified & directed.
M & L Vitrified tiles 8-10mm thick joint less/edge cut, dark shade, glazed double charged (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, over and including 10mm thick backing coat in cement mortar 1:4 including dismantalling of existing tiles and cement screed bedding complete all as specified & directed. Note:- The quoted rate is deemed to be included those tiles fixed right angled to each other, the each tile should be chamfered/trim/sharp at 45 degrees at joint/corner/edge
Material and labour Rendering 15mm thick cement mortar 1:4 over brick/ concrete walls surface of any description and material, finished even & smooth without using extra cement complete all as specified & directed.
M & L rendering 10mm thick cement mortar 1:3 over concrete ceiling surface finished even & smooth without using extra cement complete all as specified & directed.
M & L Preparation new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
M & L Preparation of newly plasterd ceiling surfaces including necessary filling of voids with wall care putty and applying three coats of white wash all as specified & directed.
M & L preparation of old treated surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified & directed.
M & L preparation of new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified & directed.
Material & labour preparing, washing, rubbing down and complete removal of existing treatment and applying two coats acrylic distempering having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat of primer applied on old decorated surfaces of walls including necessary filling of voids with wall care putty complete all as specified & directed.
S & F PVC (SWR) pipes 75mm bore dia single socketed in any length with rubber ring joints, laid in trenches or in floor including necessary cutting in concrete complete all as specified & directed.
M & L Preparation of old decorated ceiling surfaces including necessary filling of voids with wall care putty and applying two coats of white wash complete in all respect as specified & directed.
S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified & directed.
PURVIK CONSTRUCTIONS
RAJENDRA KRISHNA SARAF
Vinod Enterprises
shree bhavani constructions
M/s. N D KALING
M/S MAHADEV M PATIL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .