Renovation of Fourth Floor at Jharkhand Bhawan, Vasant Vihar, New Delhi For the Year-2021-22

Amount

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size) derived from natural sources all complete as per building specification & direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form all complete as per building specification & direction of E/I.

Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade

Area of slab over 0.5 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/ Granite/ stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing wood work in frames of false ceiling, partitions, paneling, ledge etc. sawn and fixed in position with necessary stainless steel screws etc.

Kiln seasoned and chemically treated hollock wood

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed, battens and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Sal wood

Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood

Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick

Providing and fixing under mentioned for plain paneling/ partitioning/ Ledges with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, making grooves, cutouts for light points etc. complete as per direction of Engineer-incharge (Frame work shall be paid for separately).

12mm thick commercial ply conforming to IS : 1328 BWR type

6mm thick commercial ply conforming to IS: 303 BWR grade

Providing and fixing plain ceiling for all heights with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, making grooves, cutouts for light points complete as per direction of Engineer-incharge (Frame work shall be paid for separately).

12mm thick commercial ply conforming to IS : 1328 BWR type

6mm thick commercial ply conforming to IS: 303 BWR grade

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin- charge complete. 205 X 19 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board

Painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats.

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/dooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180 nos

2. Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of scaler coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrsz then this dry surface is again fine wet rubber smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer in Charge (Final coat to be done in 1 or 2 layers without gap of time)

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C kitchen and the like consisting of :

Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

IInd course of 20 mm cement plaster 1: 3 (1 cement :3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm.)

Providing and laying compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineerin- charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling old plaster or skirting, dado raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing toilet paper holder :

C.P. brass

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

20 mm nominal internal dia Pipes

25 mm nominal internal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal internal dia Pipes

20 mm nominal internal dia Pipes

Providing and fixing soil, waste and vent pipes :

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing plain bend of required degree

Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed heavy class Steel /PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.a) Group C

Wiring for secondary light point(Group point wiring) / fan point / exhaust fan point / call bell point with 3 x 1.5 sq .mm. FR PVC insulated copper conductor cable in existing surface/ recessed medium class PVC conduit, (looped from above primary point wiring and controlled by the same modular switch.) etc.as required

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface / recessed Steel / PVCconduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in existing surface/ recessed Steel / PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in existing surface/ recessed Steel /PVCconduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed Steel /PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

3 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing of following modular switch/ socket outlet on the existing Modular plate & switch including connection but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

15/16 amp switch

6 pin 15/16 amp socket outlet

Supplying and fixing following size/ modules, GI box Boxes alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing stepped fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing of modular Blanking plate on the existing modular plate & switch box excluding modular plate etc. as reqd.

Supply and fixing following modular switch/socket on the existing modular plate and cover plate & switch box including connections but excluding modular plate etc. as required.

Telephone socket outlet. (RJ - 11)

TV antenna socket outlet

Supplying and fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

1 or 2 Module ( 75mm X 75mm )

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required.

Supply, laying, testing and commissioning of the following co-axial PVC insulated conductor cable in existing surface / recessed conduit etc. and including making terminal joints, complete as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20 mm dia.

25 mm dia.

32 mm dia.

Supplying and fixing of following sizes of heavy class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm dia.

25 mm dia.

32 mm dia.

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2 mm thickness

450 mm width X 62.5 mm depth X 2 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2 mm thickness

450 mm width X 62.5 mm depth X 2 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2 mm thickness

450 mm width X 62.5 mm depth X 2 mm thickness

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 62.5 mm depth X 2 mm thickness

450 mm width X 62.5 mm depth X 2 mm thickness

Supplying and fixing following way, single pole and neutral, prewired, sheet steel, isolator distribution board, 240 volts, on surface/recess, complete with loose wire box ,terminal blocks, duly prewired with Suitable size FR PVC insulated Copper conductor upto terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing complete etc. as required. (But without MCB/RCCB/Isolator)

16 way, Double door

6 way, Double door

Supplying and fixing following rating, 2 pole, 240 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

25A/32A, DP 10kA MCB (4+1)=5

Installation ,Testing, Commissioning of wall bracket fittings of all sizes and shapes including LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED Fittings of all types, with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED Fittings of all types and shape, with all accessories and tube etc. on falsceiling including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of LED light/LED Strip / rope fixture in false ceiling/surface/wall/ in Cove, complete with all accessories as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastromeric nitrile rubber of minimum 45 Kg / m3 density, thermal conductivity 0.037W/MK or better at 20 C mean temperature Class O Insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all aspect.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35 mm thick M.S. Sheet for pipes upto 350 mm dia and from minimum 7mm thick MS sheet for Pipes of 400 mm Dia and above.

50 mm dia MS pipes (32 mm insulation)

25 mm dia MS pipes (19 mm insulation)

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water line duly insulated to the same specifications as the connected piping and adequately supported as per specifications. 'BUTTERFLY VALVE Supplying, fixing, testing & commissioning of Butterfly Valve for chilled water circulation, with C.I body SS disc nitrile sheet & O- ring & PN-16 pressure rating as specified. All valve shall be insulated with the same material as of pipe insulation material.

50 mm dia

TEMPERATURE GAUGE Supplying, installing, testing and commissioning of Immersion Temperature sensors with a separable stainless steel/brass well. Pressure rating of well is to be consistent with the system pressure in which it is to be installed.Operating range shall be -20 to 70 deg C; pressure rating shall be min. PN 16, IP 54 protection,1000 ohms platinum at 0 deg. C, . To meet UL 1995 plenum requirements if necessary. Accuracy to ±0.73F° at 70°F (±0.41C° at 21°C), DIN Class B..(With BMS Connectivity).

GSS DUCT (FACTORY FABRICATED) Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description

GSS DUCT (SITE FABRICATED) Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply & return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description

RETURN AIR GRILL Supply, installation, testing ,balancing and fixing of Powder coated aluminium extruded grill for return air as per specification & the sizes will be as per schedules and drawing.Refer technical specification for detail description

Supply,Installation,Testing and commissioning of Thermal insulation material for Duct insulation.It shall be anti-microbial closed cell cross linked polyethylene foam with aluminium foil.Thermal conductivity of the insulation material shall not exceed 0.032 W/moK at an average temperature of 25oC. Density of the material shall be 25-30 Kg/m3. The product shall have temperature range of –40 oC to 105oC. The insulation material shall be fire rated for Class 0 for surface spread of flame test. Water vapour permeability shall not exceed 0.15ng/Pa.Sec.m. Thermal conductivity of the material shall not be affected by ageing, as per DIN 52616. The material must be tested for ageing effect in an accredited laboratory for a minimum period of five years to satisfy the ageing criteria. The smoke density of the material shall not exceed 1. There shall be no toxicity in the emitted smoke, both under flaming and non-flaming conditions. The quoted price shall include adhesive and accessories required to fix the insulation inside the duct. Make: Trox / Pineair / Systemair / Ruskin Titus 'DUCT INSULATION

Make: Armacell / Vidoflex / Eurobatex / Hira 19 mm on Supply/Return duct

DUCT ACOUSTIC LINING , Supply ,Installation,testing and commissioning of duct acoustic lining of supply air duct and plenum with 15 mm thick Open Cell engineered Nitrile Rubber foam of density 140-180 kg/cu.m with in built Microban and tested as per ISO 354:2003 complete as required and as per specifications. Make: Armacell / Vidoflex / Eurobatex / Hira

15 mm thick

Providing and fixing aluminium die cast body TS 68 door closer with standard arm (EN2/3/4 or equivalent fixed with necessary accessories and SS screws etc complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade 271 Sash lock with EPC 60mm Both side key 51200021, 68000055 or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Tower Bolt Size - 10", SAP code 9117718 or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade DB002/2/6- Tower Bolt Size 6 SAP code 9117696 or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture TGDID 300 x 22 S, Satin SS 304 code- 9125491 with dead lock set 706 Dead Lock Type 2 Package - 60mm one side key and thum turn or equivalent fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture SS 304 grade Door Stopper SAP code 9113319 or equivalent - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.

Providing, making and fixing Cabinets in Room of desired size 600mm deep made out of 19mm thick BWR commercial board and 6mm thick ply having lamination of 1mm thick of approved shade and colour with grain direction (to be paid separately) as per drawing on top, bottom, back, sides, vertical partitions, shutters and wherever required as per drawing including making grooves on the elevation and second class teak wood lipping on edges and matching grooves etc. magnetic/ ball catchers, Stainless Steel handles in chrome/ brush finish, multi purpose locks, wood preservative paint inlcuding providing and pasting 0.75 mm balancing colour laminate of approved color on unexposed surfaces etc. all as approved and complete as per details shown in design and drawing.

Extra for providing and fixing 50 mm thick polyurethane foam of good quality 50 kg density over wooden paneling including leatherite upholstery over and above the foam including staples etc. all complete as per design, drawing

Providing and fixing wooden covering for curtain tracks of required width made out of 19 mm thick BWR ply board for all heights & levels fiwed to frame work including all scaffolding, screws, nails, cleats, plugs and second class teak wood lipping on edges wood preservative paint etc. all as approved and complete as per details shown in design and drawing.

Providing and fixing 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets complete fixed with 40 mm long screws, rawl plugs etc., complete

Providing and fixing in position mirror 6mm thick of Modi Guard with 12 mm B.W.P commercial ply at the back and Second class teak wood frame including the cost of screwes, washers, stainless steel studs etc. mirror to be bevelled all complete as per design, drawing and direction of Engineer-in-Charge.

Providing and fixing frameless glazing with 12mm thick toughened edge polished clear float glass fixed at ceiling, floor and sides with aluminium U channel of appropriate size with silicon sealant filled in as per approved design and drawing. The aluminium channels at all locations shall be fixed to masonry with SS screws. The joints between the glass panels wherever occurring shall be in line and filled with silicon sealant of specified make so as to avoid any air gap in between all complete. Including making necessary holes. Maximum size of the glass panels shall be used or as specified in the approved design and drawing.

Extra for providing openable panel/ glazed door to shower area with necessary SS hinges/ hardware (304 grade), clear rubber/ pvc strip at the glass door panel and providing and fixing SS handle (304 grade) Towel rod cum handrail 458 mm x 205 mm x 19 mm SAP code 9133110 as approved all complete.

Providing and fixng wall paper on walls for all floors & heights finished in smoth line and level etc. all complete (Basic rate Rs. 100 per sqft) of Elementto, Artisan or equivalent make

Providing,Fixing, testing and commissioning of Ivory/white colour vitreous wall hung European water closet including SS grab bar, brass / SS screws and washer ,C.P. bolts, nuts, C.I. chair or other hanging arrangements, bakelite seat & cover with C.P. hinges & rubber buffers, C.P. brass screw, washer with all accessories including cutting & making good the walls & floors slab wherever required.(Preferred make-Roca-RS346537000,RA80153200B, ) OR equi.

Providing,Fixing, testing and commissioning of concealed type cistern comprising of actuator button facia assembly including brass / SS screws and washer ,C.P. bolts, nuts, with all accessories including cutting & making good the walls & floors slab wherever required.(Preferred make- SCHELL cistern-030640099 ) or equi.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(Make-Roca-RS327500000,RT5A3L20C00,RT525220603) or equi.

White Vitreous China Wash basin size 565x425x140 mm with a 15 mm CP Brass wallmounted basin mixer

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore(Make-Roca-RF525159700)

15 mm nominal bore

Providing and fixing CP liquid soap container with glass bottle 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour.

Providing and fixing of CP brass Health faucet with 8mm dia 1mtr. Long Stainless STEEL tube and wall hook fixed to wall withug and CP brass screws complete. (Make: Roca-RF9060A1)

Prividing and Fixing 1.5 feet long connecting hose with nuts at both ends complete.(Make: PARRYWARE Cat.No.T754099SS)

Providing and fixing Brass metal fully way valve of approved quality all complete as per specification and direction of etc.(zolato HSN CODE : 84818090)

15mm dia

20mm dia

Providing and fixing capacity of 25 ltr Geyser approved shape including providing & fixing capacity 3 litre/6 litre, including fittings, nuts, bolts and gasket etc complete. (AO SMITH SZS-025)

Providing and Fixing 4-way concealed divertor with front plate and diverter handle cutting and making good the wall complete in all respect.(Roca-RT5A2220C0N)

Providing and Fixing Over head shower 105 mm dia with Shower Arm complete as per instructions of the engineer-incharge.(Roca-RF5B2350C00,RF5B0150C00)

Providing and Fixing CP Bath spout with wall flange complete as per instructions of the engineer-in-charge or as per equivalent make (ROCA-RT525308900.)

Providing & fixing 75mm x 50mm G.I waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to waste pipe.

Providing and fixing HOPPER CONNECTION for 100 mm dia floor trap formed out of main pipe (Type A) with multiple side inlets, suitable for various dia pipes, side connections, including all fixtures and fittings as per site conditions and as per standard details and water tight sealing of joints and area surrounding the grating and as directed.

Providing and fixing uPVC pipes and fittings ,clamps and hinges including cutting chases and holes and making good the walls and ceiling for waste pipes from wash basins, urinals kitchen sink and equipment waste connections pump deliveries & suction & condensate drainage as directed.

40 OD PIPE

63 OD PIPE

Dismantling C.I. pipes with fittings and clamps inlcuding stacking the material within 50 metres lead : Providing and fixing of hydropneumatic/booster system comprising of:

Capacity : 50 LPM Each Pump @ 40 M head. (Make- Grundfoss)

Shaver socket unit

Supply and fixing following modular switch/socket on the existing modular plate and cover plate & switch box including connections but excluding modular plate etc. as required.

KEYTAG

BELL PUSH /BUZZER

DND and CMR indicator panel - outside

Supplying, Installation, testing and commissioning of following sizes of telephone distribution board in M.S. hinged type box duly painted complete with Krone type tag block etc. including terminations of cable as required.

Supplying, Installation, testing and commissioning of following sizes of 0.5 mm dia annealed tinned copper conductor PVC insulated and PVC sheathed unarmoured telephone cable on surface/ existing cable tray complete as required.

Supply installation testing and commissioning of Telephone Single Line LCD Display with 12 Programmable Keys of approved makes

Supplying of lighting LED luminaries complete with cold rolled sheet steel aluminium brass housing duly stove enamel painted, reflector, opal acrylic/ polystyrene louvers cover or metallic reflector / louvers, with Electronic ballast,/ driver /LED LAMP,holders, starters, MS clamps required in case of recess mounting fixtures) with LED tube/lamp and duly wired etc. as required. Note :- All fitting fixture model shall be as per approval of client / Arc / consultant.Below given are indicative.

HANGING LIGHT 7.5 WATT LED of Havells Cat No LHFXAGP1TN1K007 or equivalent

WALL BRACKETLIGHT Havells Cat No LHFOAIC1TZ1C040 or equivalent

15 WATT LED ROUND DOWNLIGHT FIXTURE Havells Cat No LHEBADP7IZ1W015 or equivalent

12 WATT LED ROUND DOWNLIGHT FIXTURE Havells Cat No LHEEGEPBIE1W012 or equivalent

10 /9WATT MIRROR TOP LIGHT FIXTUREHavells Cat No LHEXASP7PN1W020 or equivalent

18 WATT LED ROUND DOWNLIGHT FIXTURE Havells Cat No LHEEGEPDIE1W018 or equivalent

20 WATT BOX TYPE LED LIGHT FIXTURE Havells Cat No LHEXACP7IN1W030 or equivalent

LED COVE LIGHT Havells Cat No LHEHCPP5NN1W036 or equivalent

Supplying, of 1200mm sweep A.C. ceiling fans complete with fan motor, blades, down rod, canopy fan hook etc. as required .

Supply, laying and commissioning of 2x 1.5 sq mm FRLs twisted pair shielded copper conductor cable for the length of 1 meter with connection using connectors / thimbles both sides (existing cable and new cable)in flexible steel conduit including connections and interconnections as required.

Supplying and drawing of speaker cable Two pair, 2-core, 1.5 sqmm PVC insulated copper conductor cable for the length of 1 meter with connection using connectors / connecting accessories both sides (existing cable and new cable) in PVC flexible conduit including connections and interconnections etc. as required.

Dismentling and handing over with list for one room set light ,fan,switch / box / sockets, Detectors,speakers and other associated items etc complete as required.

Dismentling and handing over with list for one room set all type of wiring and connections from existing conduit / surface / DB / Panels / rack / box and other associated items etc complete as required.

Dismentling and handing over with list for common area light ,fan,switch / box / sockets, Detectors,speakers and other associated items etc complete as required.

Dismentling and handing over with list for common area all type of wiring and connections from existing conduit / surface / DB / Panels / rack / box and other associated items etc complete as required.

CONDENSATE DRAIN PIPING 'Supply, installation, testing and commissioning of Rigid heavy class uPVC piping with minimum 6 mm nitrile rubber insulation over the pipes ,complete with fittings, supports,U trap arrangement ,clean plug and accessories for units as per specifications and technical specification.

Make-Supreme / Finolex / AKG 25 mm dia

Supply, Installation, Testing and commissioning of following set of ball valve with and without Y strainer with bronze body SS Disc, suitable for PN 16 pressure rating for chilled water circulation as specified.

25 mm dia

25 mm dia (with strainer)

0-9 USGPM

DRAIN VALVE Supply, Installation, Testing , & Commissioning of Ball Valve of 25 mm diameter (Drain) in dirt legs complete with nipples etc. as required as per specifications.

AUTO AIR VENT Supply, Installation, Testing , & Commissioning of Ball Valve of 25 mm diameter across the highest point in pipe line complete with nipples etc. as required as per specifications.

PURGE VALVE Supply, Installation, Testing , & Commissioning of Ball Valve of 25 mm diameter in dirt legs complete with nipples etc. as required as per specifications.

FLEXIBLE CONNECTIONS Supply ,Installation ,Testing and Commissioning of Flexible connector for following Dia. pipe suitable for PN 16 pressure rating to be installed at pump and chiller suction and discharge .

25 mm dia pipes

Temperature and RH sensor and adjuster package. Supply,Installation, Testing and Commissioning of micro-processor based Room temperature , humidity sensor and remote adjuster package within a MS housing on wall having a stainless steel cover plate.This package shall have a temperature and humidity display - red 2" high LED character for operation rooms.

Sensor, adjuster (Snap acting humidistat/Proportional thermostat- Microprocessor based) and displayer package, as described above. (Suitable for For CHW , Monsoon reheat & humidifire Connection)

Supplying, installing, testing and balancing of alumnimium powder coated diffusers(sample shall be approved before the execution) with GI Plenum Box (24 G) having plenum height of min 300 mm or as required and ducting connection from side. Plenum Cost Shall be included in this item.

Supply,Installation,testing and commissioning of double Layer canvas connection fire retardant cloth for the end connection of FCU/CSU/AIR WASHER/SCRUBBER/TFA and Ventilation fan to reduce the vibration.It shall be fire rated for atleat 2 hrs.Refer tender specification for detail description

WEATHER PROTECT COAT FOR CHILLED WATER PIPE All chilled water pipes shall be insulated as specified and the insulated pipes shall be coated with Fevicol Weather Protekt Coat for protection against Mechanical damage, Water Permeance Fungal growth, Flame spread, and Weathering Reistance. The product should comply complete specification.

Make: Pidilite / Thermoshield / Armacell 50 mm dia MS pipes (32 mm insulation)

25 mm dia MS pipes (19 mm insulation)

LAG COATING FOR DUCT INSULATION The duct in internal areas shall be insulated as specified and the insulated duct shall be coated by Fevicol AC Duct King Lag coating for protection against Mechanical damage, Fungal growth, Flame spread, Water Permeance. The coating shall confirm UL723 for surface burning characteristics. The coating should comply the complete specification.

Make: Pidilite / Thermoshield / Armacell 19 mm on Supply/Return duct

Supplying, installing, testing of signal cables, 2C x 1.5 sqmm, copper unarmoured, ATC conductor mul stranded twisted shielded cable for signals and third party communication

Supplying, installing, testing of signal cables, 2C x 1.5 sqmm, copper unarmoured ATC conductor mul stranded shielded cable for DDC to DDC communication

Providing, Supplying and fixing Curtain Fabric of following specifications of Asian or equivalent make

Providing, Supplying and fixing Sheer Fabric of following specifications of Asian or equivalent make

Providing, Supplying and laying Matress of following specifications of Sleepwell or equivalent make

Providing, Supplying and laying Comforter of Homescape or equivalent make

Providing and fixing Track – Super Track of following specifications

Supplying and Placing of Sofas 3 Seater of Leather. Material & Subtype Leather - Semi Aniline Leather Colour & Colour Family White - Cream Dimension (L)1960mm X (D)880mm X (H)760mm Add Ons None Mechanism None Seating Capacity 3 Seater Seating Height 450mm Legs Stainless Steel The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Supplying and Placing of Sofas/2 Seater Material & Subtype Leather - Semi Aniline Leather Colour & Colour Family Brown - Mushroom Brown Dimension (L)1380mm X (D)880mm X (H)760mm Add Ons None Mechanism None Seating Capacity 2 Seater Seating Height 450mm Legs Stainless Steel The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/Supplying and Placing of Bed king Size Material & Subtype Premium Leather With Head bord on leather Colour & Colour Family White - Cream Dimension (L)2130mm X (W)2370mm X (H)920mm Mechanism Hydraulic Seating Height 480mm Finish Matte Size King The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/Supplying and Placing of Centre Table Material & Subtype Stone - Marble Colour & Colour Family White - Off White Dimension (L)1200mm X (D)600mm X (H)465mm Finish Glossy Style Contemporary Then Not Including in drawer The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/ Supplying and Placing of Tv Side unit . Material & Subtype Glass - Tempered Glass/Engineered Wood - MDF Colour & Colour Family Black/White Dimension (L)(1300-2000)mm X (D)330mm X (H)400mm Function Extendable, Storage Finish Matte Size Rectangular Style Modern The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC Certified.Make Durian , Model no Jane .Warranty 5 Years

CM/Supplying and Placing of Dreasing Table With Both side drawer, and long lenth mirrur .TheProduct should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Supplying and Placing of Chair , Material: Leather .Dimension:(W)520mm X (D)510mm X (H)1170mm The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Supplying and Placing of Solid Wood Coffee Table Material & Subtype Solid Wood - Rubber Wood Colour & Colour Family Brown - Walnut Dimension (Dia)600mm X (H)610mm Legs Solid Wood Finish Matte The Product should be fom GREEN GUARD, AIOTA, IGVC, FSCall complete as per building specification and direction of E/I.

Supplying and Placing of Bed Side Table Material & Subtype Solid Wood Colour & Colour Family Brown - Dark Oak Dimension (L)500mm X (D)410mm X (H)460mm Finish Matte Size Standard.The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/Supplying and Placing of Chair .TheProduct should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Supplying and Placing of Sofas/2 Seater Material & Subtype Leatherite - Chenille Colour & Colour Family Blue Dimension (L)1810mm X (D)940mm X (H)700mm Add Ons In Built Mattress Mechanism None Seating Capacity 2 Seater Function Straight To Bed Legs PVCThe Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/Supplying and Placing of king Size Bed , Material & Subtype Premium Leatherette With Head bord on leather Colour & Colour Family White - Cream Dimension (L)2130mm X (W)2370mm X (H)920mm Mechanism Hydraulic Seating Height 480mm Finish Matte Size King The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/Supplying and Placing of Centre Table.with Glass Top .The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

CM/ Supplying and Placing of Dinning Table with 4 Seater Size (L)1500mm X (H)750mm Table Top Material:Solid Wood with Glass Top, Chair Frame: Solid Wood Chair Material is Leather The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Supplying and Placing of Coffee Table Set (Table with Two Arm Chair), Material & Subtype Solid Wood - Rubber Wood Colour & Colour Family Brown - Walnut Table Dimension (Dia) 600mm X (H)610mm, Chair: (L)640mm X (W)530mm X (H)560mm Legs Solid Wood Finish Matte The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Supplying and Placing of Bed Side Table Material & Subtype Solid Wood Colour & Colour Family Brown - Dark Oak Dimension (L)500mm X (D)410mm X (H)460mm Finish Matte Size Standard.The Product should be fom GREEN GUARD, AIOTA, IGVC, FSC all complete as per building specification and direction of E/I.

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

M/S B D Enterprises