Supplying installation testing and commissioning of 10 nos Solar Tree at Delhi Cantt Assembly Constituency AC 38 out of MLA LADS fund during 2026 27

Supplying installation testing and commissioning of Hybrid type Solar Tree based on Solar Photo Voltaic Power Generation system conforming to MNRE specification (as amended up to date), consisting of Mono/Poly Crystalline silicon solar cells. Solar photovoltaic Module. The trunk of solar tree shall be made out of 150 mm dia SS tubular pole (304 grade) of height not less than 3.0 mtr fixed on MS base plate of size minimum 600 mm x 600 mm x 12 mm thick fixed on suitable strength CC foundation (as per manufacturer standard) with branches made out of 40 mm dia suitable thickness S.S. pipe approximately 1.0 mtr length aesthetically connected to base pipe (trunk) on suitable size foundation. The height of the solar tree should not be less than 4.0 mtr from the base of the solar tree trunk. The Nos of leaves 10 with minimum length approximate 4 feet, Solar PV Module 12Volts, 100Watts -10 Nos. Battery LiPo4 12 Volts, 50Ah -10 Nos. with Module Mounting Structure, 10 watts Solar LED leave panel Light - 10 Nos, Solar Charge Controller 12.8 Volts, 6 Ampers-10 Nos. Hybrid Solution-AC/DC System i/c all accessories, excavation, refilling, earthing, connections complete etc. as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

3 x 10 Sq. mm

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

SITC of Acid etched in reverse pattern S.S (grade-304) name plate with letters embossed in black colour and tighten with screws/ pasting with epoxy bond on the existing pipe / wall etc complete as reqd. (Size will be decided by the Engineer-in-Charge