REPAIRS TO ROOF LEAKAGE SEEPAGE and SUNKEN PORTION AND CERTAIN BR AND EM REPAIRS IN BLDGS AT NEW MILITARY STATION KAPURTHALA

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed .

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x300x7mm thick, set and jointed in neat cement slurry pointed in white or colour cement to match the colour, over and including 10 mm thick rendering on fair faces of brickwork in (1:4) complete all as specified and directed .

M&L for non skid ceramic tiles coloured tiles 7-8 mm thick (square/rectangular) polished, area of each tile exe 0.11sqm not exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed.

M&L for epoxy grout/ epoxy resin with property of water resistance, stain resistance for filling in the voids of wall and floor tile joints of width 2-3 mm, 10mm deep, complete, all as specified and directed.

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises,complete, all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces as in ceiling etc complete all as specified and directed.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.

S&F solid panel factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, drawing and as directed.

S&F Alumunium hinges for PVC door shutter, size of hinges 100mm, complete, all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed, length of bolt 200mm, complete, all as specified and directed.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long, complete, all as specified and directed.

S&F Anodised aluminium frame, powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty, complete, all as specified and directed.

S&F glavanised MS wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge

M & L for preparation of newly plastered or unplastered wall surface and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash on ceiling over a coat of white wall care putty complete all as specified and directed.

M&L for cleaning the surface and made free of vegetation, dirt, foreign particles, liatance all as specified and directed.

M&L for providing GI pipe 40mm 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed.

M&L for 40 mm thick PCC type B-0, 1:2:4 using 12.5mm graded crushed stone aggregate, as in receiving top finishing layer of ceramic tiles for sunken portion, finished even and smooth without using extra cement, complete, all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S & F CPVC pipes CPVC PIPE OUTER DIAMETER 16mm, SDR 11 & Plain CPVC SDR 11 fittings complete all as specified and directed.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge.

S & F CPVC pipes CPVC PIPE OUTER DIAMETER 20mm, SDR 11 & Plain CPVC SDR 11 fittings, complete, all as specified and directed.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed, complete, all as specified and directed.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed, complete all as specified and directed