REPAIR TO SUNKEN, CHAJJA, PARAPET, GI, CI PIPES PLASTERING AND MISC B/R NATURE WORK OF CASD, PIONEER COY, 226 ASC AND REPAIR AND MAINTENANCE OF ROOF POINTING GALVALUME SHEET, CGI SHEET AND OTHER CONNECTED WORK OF OTM ACCN IN

Amount

Demolition of cement concrete (unreinforced) / sunken floor in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and as directed.

M&L for sunken treatment as following over it complete all as specified and as directed:- (a) Rendering 10 mm thiick in cement mortar 1:4, (b) Two coats of tapecrete mixed (1:2) with cement slurry @ 3Kg/sqm per sqm or as per manufactures's instruction, surface finished even and smooth (c) Applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm (d) Applying one layer of 0.5 mm thick fibre tissue/APP membrane

M&L for PCC 1:5:10 type E-2 (40 mm graded crushed stone aggregate) as in sunken floors complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including 100mm CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and as directed.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and as directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning for refixing, wall/floor complete all as specified and as directed.

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Fixing only tubes 15mm bore any grade to walls and ceiling or laying in floors complete all as specified and as directed.

Taking up or down 20 mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, in wall/floor complete all as specified and as directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), with all fittings viz. heads, shoes, bends, swan-necks etc, removal rubbish beyond MOD land complete all as specified and as directed.

All as per srl item No 14.00 here-in-before but 75mm bore.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

All as per srl item No 16.00 here-in-before but 75mm bore.

S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces and including dismantling of cast iron drain pipes including fittings, jointed in cement mortor complete all as specified and as directed.

All as per item 18 but 100mm bore

S&F CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches complete all as specified and as directed.

S&F 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) complete all as specified and as directed.

S&F in repair 15mm bore dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed complete all as specified and as directed.

S&F 32mm dia CP waste coupling and 32mm dia flexible waste pipe 1.20 m long suitable for wash hand basin and sink complete all as specified and as directed.

S&F in repair 15mm bore dia bib taps chromium plated cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and as directed.

M&L Glazed ceramic coloured joint free tiles of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish beyond MOD land complete all as specified and as directed.

M&L Non skid ceramic coloured joint free tiles 400mm x 400mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and as directed.

M&L Non skid ceramic coloured joint free tiles 600mm x 600mm 7 to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and as directed.

Demolition of reinforced cement concrete as in Chajja, RCC parapet, Kitchen slab, Chullah hood, chimney portion and similar work concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for concerete complete all as specified and as directed.

M&L framed work such as brakets for chajjas, door chowkhat, cooler stand and similar work using framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exceeding 6 m mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per srl item No 33.00 here-in-before but except brick.

S&F in repair 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level), removal of rubbish beyond MOD land complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (12.5 mm graded stone aggre) as in bed blocks for gola, hold fast, roof padding/flooring, coping bedding rounded or chamfered and similar work etc., complete all as specified and as directed.

M&L 5mm thick rendering with ready mix mortar of approved make on ceiling surface finished even and smooth without using extra cement as whole or in patch including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises complete all as specified and as directed.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L preparation of surfaces and applying two coats of cement base paint over a coat of primer on external surfaces of walls complete all as specified and as directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of primer complete all as specified and as directed.

M&L preparation of old decorated plastered surfaces of walls etc by complete removal of existing treatment including washing, rubbing down and stopping of surface and applying two coats of oil emulsion distemper over a coat of primer on wall surfaces complete all as specified and as directed.

M&L for applying wall care putty not more than 1mm thick on wall / ceiling even and smooth surface complete all as specified and as directed.

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and as directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces complete all as specified and as directed.

M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F with 3mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane including hacking out old broken glass of any thickness/size of any description from wood/steel frame fixed with clips and putty, complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and as directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and as directed.

All as per srl item 51.00 here-in-before but exceeding 1.50 sqm but not exceeding 4.00 sqm each.

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and directed.

All as per srl item no 53.00 here-in-before but exceeding 1.00 Sqm but not exceeding 2.00 Sqm each.

M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium three track window, shutter (Size 45X15mm) i.e. two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section (confirming section Cat No 20814 from 'Jindal' ) complete window size (92.00X45.50mm) with frame (Chowkhat) size (101.60X44.45X1.90mm thick), including all necessary locking arrangements (touch lock of zinc alloyed powder coated as per sample) and wire cloth/glass/fittings complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per srl item no 57.00 here-in-before but without glazing bars.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10cm girth including preparation of surfaces complete all as specified and as directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, comercial type on both sides complete all as specified and as directed.

M&L for preparation of new wooden surfaces, painting two coats of synthetic enamel paints over a coat of pink primer exc 10mm width or girth complete all as specified and as directed.

S&F 3 mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 100 mm long butt hinges medium weight cold rolled MS welded to pressed steel/angle iron frames complete all as specified and as directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125 mm long aluminium handles cast type anodised ISI Marked complete all as specified and as directed.

S&F 250 mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repair 28mm dia MS drapery curtain rod with coloured CP coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified and as directed.

M&L Raking out joints/pointing to brick or brick tiles, laid flat, in floors, surface channels, roofs, etc and including flush pointing to brick tile laid flat or brick tiles in pavings in cleaning and joints grouted flush in cement mortar 1:3 mixed with 5% cruide oil by weight of cement, complete all as specified and as directed.

Dismantling of asbestos cement (corrugated semi corrugated sheet & ridge in roof covering complete all as specified and as directed.

M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet o.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugation side lap fixed with coach screws and washer in roof, wall etc complete all as specified and as directed.

M & L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet o.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Refixing of sliding shutter gate and repairing of sliding crane rail sections, wheel and other components and refixing of sliding shutter on same (Size of one shutter 4.5mx4.5m) complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F for expanded metal, weight n. Exc.4 kg per sqm, cut to length, bent to shape required, welded to steel members/frame where required in any position (Ventilator etc) and at any height complete all as specified and as directed.

Raking out joints and flush pointing in cement mortar 1:3 to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified and as directed.

M&L Complete removal of existing treatment to old plastered or unplastered surfaces of walls & applying two coat of colour washing to wall complete all as specified and as directed.

Keshav Brothers (BID ID -3125403)

MAA SANTOSHI ENTERPRISES (BID ID -3124885)

M/s M M BAHL (BID ID -3124093)

L G BUILDERS (BID ID -3122430)

M/S Rohit Enterprises (BID ID -3125097)

M/S Yamin (BID ID -3122276)